Airsoft Pistol Magazines

If you're looking for an easy way to carry a lot more ammo, the Delta Armory 50rnd Extended Magazine for P-Series GBB Pistols has you covered! This magazine is constructed from a heavyweight alloy with a steel feed spring and polymer feed lips. The base plate can easily be removed, making maintenance and repairs a breeze. On the rear of the magazine, we can find some markings that count up to 31, presumably a nod to real steel extended pistol magazines.

This double-stacked magazine holds a whopping 50 BBs, which can be loaded either at the top or front, using a speedloader. To fill the gas, there is a fill valve located on the bottom, recessed into the magazine. Due to the magazine being larger than a regular pistol mag, it takes longer to cool down when shooting so you'll get more shots at full power before noticing a dip.

Compatibility-wise, this magazine is designed for the Delta Armory P-series pistols but should fit most EU-style pistols, including the Tokyo Marui EU pistol, the Action Army AAP-01 and the Umarex Glock. If you're looking for extra BBs to dominate with your sidearm, the Delta Armory 50rnd Extended Green Gas Magazine for P-Series GBB Pistol is for you!

A spare magazine for WE Europe 1911 Airsoft pistols. The magazine is constructed entirely from Alloy, with the only Polymer parts being the feed lips and follower.

A Spare BB Airsoft Magazine for ASG's Green Gas powered CZ P-09 Gas Blowback pistol.

A Co2 Magazine designed for the CZ P-09 Gas Blowback Airsoft Pistol. The magazine is constructed from Alloy, with Polymer Feed Lips, BB Guide and Base Plate. 

This alloy magazine can hold up to 24 rounds to use with any generation of the Raven R series or WE Europe F series of pistols. The mag uses green gas, which can be added via the valve on the base of the magazine. For filling with BBs, there is a window on the front which is wider towards the base, accessed when the follower is pulled down.

A replacement magazine for the CM.125 AEP Electric Pistol which is designed to fit into the pistol and be used to carry extra rounds into the game meaning you don't have to stop mid game to use a fiddly speed loader.

A Spare Gas Blowback Magazine for any generation of the WE F226 range. 

A gas blowback CO2 magazine, designed for Cyber Gun's series of Colt 1911 Rail Gun Airsoft replica pistols.

A gas blowback Airsoft 6mm BB gun magazine designed for WE Europe's F228 series and F229 series pistols. A perfect spare to increase your trigger time, without stopping to reload. 

Need some big mags for your big handgun? The Cybergun Desert Eagle green gas magazine should do the trick! This magazine is designed for the Cyber Gun Airsoft Desert Eagle L6 GBB and holds approximately 27 BBs which can be loaded using a speed loader through the feed lips at the top of the magazine. This magazine is a green gas magazine and can be filled through the fill valve on the magazine's baseplate, and can also take summer gas to keep the FPS down to reasonable levels on hot days. The magazine is constructed from alloy with polymer feed lips, with a steel feed spring and brass valves, and has realistic mock witness holes on each side, matching the cut-outs in the real Desert Eagle magazine used for gauging how many rounds are left.

The Novritsch 32rnd Gen.3 Gas Magazine is designed for Novritsch SSX23 or MK23 Pistols, but it is compatible with non-blowback pistols from Marui, KJW, and ASG. It is constructed from alloy, giving it a nice weighted feel when reloading. The magazine holds green gas which is refilled at the bottom. The BBs are loaded into the magazine by pulling down the spring tab and filling the BB chamber with a speedloader. This mag has a 1-stage valve and a hard rubber gas router for a snappy trigger return.

Being a product by Novritsch, we know that high quality is a given and satisfaction can be guaranteed. Pick up a Novritsch 32rnd Gen.3 Gas Magazine for SSX23/303 as a spare mag for one of your sidearms, so you can have that extra clip of ammo when you need it most.

If you're looking for spare mags for your Golden Eagle Hi-capa, here they are! The 25rnd Green Gas Magazine for Hi-capa GBB is constructed from alloy with brass valves, rubber o-rings, a steel feed spring and a polymer baseplate and is a green gas magazine. The mag can be filled using the fill valve on the base plate and is loaded with BBs either through the feed lips at the top of the mag or by pulling the follower down and loading BBs in through the front.

This magazine is compatible with the Golden Eagle Hi-capa series but is patterned after the TM design so should also be compatible with other Hi-capa platforms as long as they use the Tokyo Marui internal system.

An Alloy constructed 23rnd magazine for the Vorsk Vengeance Hi-Capa Gas Blowback Pistol.

The Novritsch 24rnd Magazine is designed for Novritsch SSX23 or MK23 Pistols, but it is compatible with non-blowback pistols from Marui, Y&P, Stti, KJW, and ASG. It is constructed from alloy, giving it a nice weighted feel when reloading. The magazine holds green gas and can be refilled at the bottom, the BBs can be inserted into the magazine by pulling down the spring tab and filling up the BB chamber with a speedloader. This mag comes with a 1-stage valve and has a hard rubber gas router for a snappy trigger return.

Being a product by Novritsch, we know that high quality is a given and satisfaction can be guaranteed. Pick up a Novritsch 24rnd Magazine for SSX23/MK23 as a spare mag for one of your sidearms, so you can have that extra clip of ammo when you need it most.

A new design of Airsoft 6mm Dan Wesson revolver cartridges from ASG with a deep grove cut out at the rear.

A Green Gas, 25 round magazine for the UMAREX Heckler & Koch USP .45 GBB Pistol.

A magazine designed for use in the WE Europe's GALAXY Series of pistols. Each magazine is of a full metal construction and holds up to 25 rounds.

An Airsoft 6mm BB gas blowback magazine for the 5.1 Hi-Capa pistol series, with a double stacked design it has a capacity of up to 25 bb rounds. 

If you need mags for your ASG P-10C CO2 version, here you go! Just like the original mag supplied with your ASG P-10C CO2 GBB pistol, this magazine holds 22 BBs and is constructed from alloy with a high-density polymer baseplate. Loading the mag is the same procedure as other GBB magazines, either load through the feed lips at the top or through the follower channel on the front when the follower is held down. You can use a speed loader or do it by hand, depending on your timescale!

While the CO2 and Green Gas versions of the P-10C are cross compatible, we have been told specifically by ASG not to use CO2 mags in the polymer slide equipped green gas model to avoid premature wear and tear and potentially, catastrophic failure. We suggest you heed this warning!

The CO2 compartment is inside the shell and accessible with the baseplate removed. To achieve this, simply pull upwards on the polymer tab at the bottom of the follower channel and slide the baseplate forward. With this done, you will see the CO2 plug inside; unscrew this and you can pop in a 12g CO2 capsule (we recommend adding a bit of silicone lube to the top of the capsule), tighten it back down again, slide your baseplate back into position and you're good to go! 

If you want to keep your beast of a Novritsch pistol shooting perfectly in cold weather, you'll need one of these! The Novritsch 31rnd CO2 Magazine for SSP1/SSP5 GBB Pistol is constructed from alloy with a polymer baseplate and is compatible with both the SSP1 and SSP5 GBB pistols.

The mag is loaded either through the feed lips or the follower channel when the follower is held down using a speed loader or loading tool. If you're new to CO2, we recommend giving our CO2 guide a quick read so you can stay abreast of maintenance and CO2-specific safety issues.

This mag uses 12g unthreaded CO2 capsules, one of which needs to be installed inside the magazine shell. To access the CO2 compartment, simply press the small button on the bottom and slide the baseplate off. Underneath, you will find the CO2 plug which can be removed with the included Allen key or a flat tool if you don't have the Allen key handy. Install your CO2 capsule inside, tighten the plug down until you hear the capsule pierce and replace the baseplate; you are now good to go!

If you need spare magazines for the KRYTAC Maxim 9 GBB you have found what you need! Like the original mag, these magazines are constructed with a lightweight aluminium shell which makes them far lighter than equivalent GBB mags, meaning you can carry more and move faster!

Each magazine holds 24 BBs and can be loaded either through the feed lips at the top of the magazine body, or through the feed channel at the front of the magazine by first pulling the follower down to the bottom. The gas fill valve is on the rear of the magazine and this magazine is designed for use with Green Gas. This magazine is the original mag supplied with the Maxim 9 and is also compatible with the UMAREX/VFC Glock 17 GBB, both gen.4 and gen.5 flavours.

If you're planning to run your EU series, AAP-01 or Lancer Tactical CTHULHU on HPA, the Lancer Tactical HPA Adapter for M4/AR-15 AEG Magazines; EU Series & AAP-01 will do the trick! This HPA adapter is designed for EU series GBB pistols and should also fit the Action Army AAP-01 and Lancer Tactical's radical CTHULHU pistol. Designed to allow standard M4/AR-15 AEG mags to be used along with a High Pressure Air (HPA) power source, you can kiss goodbye to the "cooldown" effect and limited magazine capacity with this adapter on your gat!

The set includes both an EU and US HPA connector but you will need an airline, HPA bottle and regulator to run this adapter. The advantages of using HPA when performance is concerned include the elimination of FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. If you're taking your playstyle in a speedy direction, this adapter will change your game!

If you're running an AEP and need more firepower, check this out! The CYMA 100rnd Auto Winding Drum Magazine for CM.030/122/123/127 AEP is electrically powered via an internal rechargeable battery, charging via the included USB Type-C cable. The charging port is on the front, as is the auto-winding button, allowing you to increase capacity without wearing your thumbs-down winding a wheel!

To fill the mag with BBs, simply open the fill window on the rear of the magazine body and pour your BBs in. Next, press the winding button until the noise changes to tension the magazine, ready for insertion. If your mag stops feeding but still has rounds left, hold the button to retention and then get back to shooting! 

Compatibility-wise, this magazine fits the CM.030, CM.122, CM.123, CM.127, ASG XP17 Challenger and CM.135S AEPs. If you're fed up with reloading with fiddly AEP mags, get this and you won't look back!

A 26rnd CO2 powered magazine for ASG's latest generation of the CZ Shadow pistol, which is compatible with the original SP-01 as well as the Shadow 2, and accepts a CO2 bulb via the threaded cap on the bottom.

If you're planning to run your Tokyo Marui Hi-Capa GBB on HPA, the Lancer Tactical HPA Adapter for M4/AR-15 AEG Magazines; TM Hi-Capa GBB will improve your firepower considerably!

This HPA adapter is designed for the Tokyo Marui Hi-Capa GBB series and may fit Hi-Capa clones based on the TM design, though we can't make any guarantees. Allowing standard M4/AR-15 AEG mags to be used along with a High Pressure Air (HPA) power source, you can kiss goodbye to the "cooldown" effect and limited magazine capacity if you're rocking this on your 'Capa!

The set includes both an EU and US HPA connector but you will need an airline, HPA bottle and regulator to run this adapter. The advantages of using HPA when performance is concerned include the elimination of FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. If you're taking your playstyle in a speedy direction, this adapter will change your game!

A replacement magazine for the WE Europe Little Bird pistol collection. The magazine is constructed from Alloy, and is finished matte black.

A Green Gas, 22 round magazine for the UMAREX Heckler & Koch VP9 GBB Pistol.

A spare or replacement Gas Magazine for the G&G Armament GTP9 and SMC9 Airsoft Guns, holding a total of 23rnds and being filled with Green Gas from the Inlet Valve on the Baseplate like any other Airsoft Green Gas Magazine. Whether you own a GTP9 and need more Magazines, or you own an SMC9 and you want a shorter Magazine for ease of use and/or aesthetics; if you need to lay down more fire in your Airsoft Games, then you need to stock up on Spare Magazines today.

If you're rocking the Umarex/GHK Glock 17 MOS or Glock 45 MOS GBB pistol, these are the mags you need! The Umarex 20rnd Magazine for GHK Glock 17/45 Gen5 MOS GBB is officially licenced by Glock Ges.m.b.H and includes Glock markings on the baseplate to complete the look. 

A more realistic design than your usual Glock mag, this magazine doesn't have a follower channel on the front, making it look almost identical to a real Glock magazine. Loading BBs is done through the feed lips at the top of the magazine body using a speed loader and the gas fill valve is on the bottom, concealed beneath the baseplate. To access the fill valve, push the detent on the bottom of the baseplate inwards and slide the baseplate off. Compatibility wise, this magazine is designed specifically for the GHK OEM Glock 17 MOS and Glock 45 MOS and in all likelihood, won't work with other Glock or EU series platforms. 

Want a higher capacity for your GTP9, but don't want to be slowed down by the extra weight?

G&G have revised their original design with a 50 round, extended pistol mag that is now 46% lighter, keeping you fast and agile and helping to keep your reload buttery smooth every time.