Viewing 120 of 131.
grid
list
289.00 kr.
Was 319.00 kr.
Save 30.00 kr.
  • Top 20mm Rail
  • CNC Aluminium
  • Replica of Real Part

A CNC Aluminium Upper Handguard for select LCT LCK (AK) Airsoft Replicas. It offers stunning precision manufacture and a top 20mm Rail for accessories, and is the perfect companion to any Custom Build / Modified AK.

89.00 kr.
Was 129.00 kr.
Save 40.00 kr.
  • Aluminium construction
  • Ambidextrous functionality
  • For TM EU17 Gen.4 and EU19 GBB pistols

Adding a cocking handle to your pistol might seem a bit much, but in the modern-day and age of primary pistols becoming more and more popular the pistol needs to give up some of its concealment characteristics to become more than "just" a sidearm and compete in the modern CQB site. The Tactical Cocking Handle from CowCow is an ideal solution, providing a protrusion on either side of the slide to allow the pistol to be cocked more quickly and easily, even allowing for one finger cocking from either side! This cocking lever adds a whole lot of functionality but is more compact than competition optimised designs, allowing it to still be used with most tactical holsters whilst reducing snags. This cocking lever replaces the back plate of the slide on your TM EU series pistol.

89.00 kr.
Was 129.00 kr.
Save 40.00 kr.
  • Aluminium construction
  • Ambidextrous functionality
  • For TM EU17 Gen.4 and EU19 GBB pistols

Adding a cocking handle to your pistol might seem a bit much, but in the modern-day and age of primary pistols becoming more and more popular the pistol needs to give up some of its concealment characteristics to become more than "just" a sidearm and compete in the modern CQB site. The Tactical Cocking Handle from CowCow is an ideal solution, providing a protrusion on either side of the slide to allow the pistol to be cocked more quickly and easily, even allowing for one finger cocking from either side! This cocking lever adds a whole lot of functionality but is more compact than competition optimised designs, allowing it to still be used with most tactical holsters whilst reducing snags. This cocking lever replaces the back plate of the slide on your TM EU series pistol.

99.00 kr.
Was 129.00 kr.
Save 30.00 kr.
  • 50 round capacity
  • Mid cap design
  • For Beretta M38

We know some of you like to do things old school, so for all you Beretta fans M38 looking for some more ammunition this mag from Snow Wolf is what you're after.

With a 50 round capacity, the mag is a mid cap design, so there's no rattle and no winding to keep things a little more realistic. The mag has sturdy polymer internals and an alloy shell for a good feel and weight in the hand.

So for all you Italian fanboys that like to skirmish with a piece of history, keep yourself in the field longer with this mag.

109.00 kr.
Was 139.00 kr.
Save 30.00 kr.
  • Shorter Than Standard
  • For VSR-10 & M28 rifles
  • 2 Hop Rubbers Per Pack

Next level of Airsoft sniper rifle hop-up rubber produced with similar materials and processes to Madbull's current line up of AEG hop-up components. 

129.00 kr.
Was 179.00 kr.
Save 50.00 kr.
  • For SMG-7 AEP
  • 50rnd Capacity
  • Tokyo Marui High Quality

A 6mm BB Airsoft magazine, designed for use with Tokyo Marui's SMG-7 AEP electric Airsoft Submachine gun, featuring a medium capacity of 50 rounds. 

189.00 kr.
Was 209.00 kr.
Save 20.00 kr.
  • Steel Construction
  • Ideal Replacement
  • For LCT AKM Models

A Steel constructed Gas Block for LCT branded AKM models, ideal as a replacement to a damaged part.

509.00 kr.
Was 629.00 kr.
Save 120.00 kr.
  • Real Wood
  • For LCT LCK74
  • Steel Gas Tube

A Real Wood handguard for the LCT LCK74 which is made to the original spec and includes a Steel Gas Tube. This is an ideal replacement for a damaged handguard, or to convert another LCT AK74 model.

69.00 kr.
Was 89.00 kr.
Save 20.00 kr.
  • Replaces Button
  • Tail Switch Addon
  • For Big Dragon T6 Torch

A Tail Switch unit designed to replace the existing Push button on the back of Big Dragon SF G2 Style T6 Torches. The tail switch is constructed from polymer with a Soft Rubber coated tail switch. 

89.00 kr.
Was 359.00 kr.
Save 270.00 kr.
  • Weighs 172g
  • CNC Machined Steel
  • Ideal for M150+ Springs

A precisely engineered and uprated loading handle for the terrifying ASW338LM Airsoft sniper rifle from Ashbury Precision Ordnance.

92.65 kr.
Was 109.00 kr.
Save 16.35 kr.
  • Replacement original part
  • Beavertail grip safety for 1911 GBB pistols
  • Compatible with most TM clone 1911 GBB pistols

If your grip safety is worn out, this replacement should cure that! The KJ Works Grip Safety for 1911 GBB Pistols is a replacement original part for the KJ Works 1911 GBB pistol series but should also fit most Tokyo Marui and TM clone 1911 GBB pistols. The grip safety is constructed from alloy and finished in black. Please note, this part may require modification to install and as such we recommend it only to experienced Airsofters with a decent amount of tech knowledge.

99.00 kr.
Was 119.00 kr.
Save 20.00 kr.
  • CNC Machined
  • Anodized Finish
  • Thread Protector

A simple device yet effective, designed to protect your Airsoft gun's outer barrel threads from damage during gameplay and transportation, or any other situation which might leave the threads exposed to the elements.  

109.00 kr.
Was 149.00 kr.
Save 40.00 kr.
  • Aluminium construction
  • Available in several colour options
  • Speed up your reloads!

If you are building a custom Hi-capa or 1911 GBB, whether it is for competition shooting or use as a primary pistol for skirmishing, a cocking lever can help speed up your reloads and get you back into the action faster! The CowCow Raw cocking handle is designed for the TM Hi-capa and 1911 GBB pistols and replaces your rear sight with a side-mounted cocking lever which can be installed for use by either left or right-handed users. This cocking handle is compatible with most TM clone GBB Hi-Capas but will only fit 1911s with a rear sight dovetail, not the classic style with the rear sight machined as part of the side.

139.00 kr.
Was 159.00 kr.
Save 20.00 kr.
  • 15rnd Capacity
  • Compact Magazine
  • For Marui TMPSG-1

This is a 15rnd Short Magazine for the Tokyo Marui TMPSG-1 Sniper Rifle (electric). It is a compact magazine which makes prone shots much easier, and reduces the chance of magazines snagging on your equipment. It is loaded from the top using a Speedloader and is very easy to carry thanks to its' highly compact design.

159.00 kr.
Was 179.00 kr.
Save 20.00 kr.
  • For BOLT BR-47
  • 600rnd Capacity
  • Textured Design

A 600rnd High Capacity Magazine for the BOLT BR-47 series, that is filled by pouring BBs through the top Fill Window, and wound via the Clockwork Winding Wheel on the base. The Magazine closely matches a popular model for modern AK enthusiasts. If you want to stay in the game for longer, then stock up on Spare Magazines today.

189.00 kr.
Was 269.00 kr.
Save 80.00 kr.
  • Low Resistance
  • Switch Assembly
  • Mini Tamiya Plug

A complete Switch Assembly for a variety of AEGs, which includes Low Resistance Wiring with either a Mini Tamiya or Deans Connector on the end.

194.65 kr.
Was 229.00 kr.
Save 34.35 kr.
  • 20rnd Capacity
  • Speedloader Filled
  • Stay in the Fight Longer

A spare or replacement Magazine for the G&G Armament M1 Garand, holding a total of 20rnds and filled using a Speedloader. These lightweight Magazines are easy to carry in bulk, and are an absolute must for an M1 Garand owner who wants to last longer in a skirmish without running out of ammo.

219.00 kr.
Was 249.00 kr.
Save 30.00 kr.
  • Ideal Spare Part
  • Steel Construction
  • For LCT AKM Series

A Steel manufactured Fire Selector for LCT branded AKM models; ideal as a spare part or replacement.

249.00 kr.
Was 289.00 kr.
Save 40.00 kr.
  • Original Part
  • For LCT LCK47
  • Steel Construction

A replacement Gas Block for LCT branded LCK47 models, which is made to the original specification from Steel as a replacement part.

305.15 kr.
Was 359.00 kr.
Save 53.85 kr.
  • Alloy construction
  • Matt Black finish
  • CO2 mag - Great for cold weather

If you are looking to take your Vorsk VX26 out into the cold look no further! This CO2 magazine will ensure you get the absolute best out of your GBB pistol, even over the winter months. Remember to lubricate both the magazine and pistol to prevent damage to your seals as CO2 contains no lubricant. This magazine uses 12g CO2 bulbs without threading.

305.15 kr.
Was 359.00 kr.
Save 53.85 kr.
  • Aluminium construction
  • Allows 1913/20mm Picatinny stocks to be mounted
  • For Tokyo Marui NGRS AKS-74U, AKS-74N and AK-102

If you have dreams of kitting out your NGRS AK with the slickest modern stock attachment interface out there your dreams can now become reality! The 1913/20mm Picatinny Stock Adapter from Laylax is designed for the TM NGRS AK, specifically the side folding stock variants (AKS-74U, AKS-74N and AK-102) and replaces the original skeleton side folder with a short length of 1913/20mm Picatinny rail to allow 1913/20mm Picatinny stocks to be mounted and swapped out for alternatives in seconds. 

The adapter is constructed from aluminium and also has a QD sling socket on the left side, in the ideal position to run a single-point QD sling setup. If you want a more modern look for your AK this adapter gives you access to MPX and MCX stocks in a plethora of shapes and sizes and also the good old M4/AR-15 buffer tube if you are after something a bit more conventional. 

629.00 kr.
Was 889.00 kr.
Save 260.00 kr.
  • 22.5" outer barrel length
  • Straight or twisted fluting
  • Anodised aluminium

Wan to bling out your VSR Bar 10? Treat your rifle with this 22.5-inch fluted barrel in your choice of either twisted or straight fluting, whichever would suit your loadout more. The PPSH barrel is constructed from extremely lightweight aluminium to help keep you light on your feet during skirmishes.

The fluting has been machined to a perfect uniformity that it sure to give your VSR/Bar-10 a sleek modern aesthetic. In real steel-rifles, fluting helps disperse heat from the barrel, as well as keep the barrel's weight down. At the end of the barrel is a 14mm female CCW thread for use with attaching tactical muzzle devices, such as flash hiders, suppressors and tracer units. Included is a thread cap if you don't fancy running any muzzle devices and like to keep things simple.

629.00 kr.
Was 889.00 kr.
Save 260.00 kr.
  • 22.5" outer barrel length
  • Straight or twisted fluting
  • Anodised aluminium

Wan to bling out your VSR Bar 10? Treat your rifle with this 22.5-inch fluted barrel in your choice of either twisted or straight fluting, whichever would suit your loadout more. The PPSH barrel is constructed from extremely lightweight aluminium to help keep you light on your feet during skirmishes.

The fluting has been machined to a perfect uniformity that it sure to give your VSR/Bar-10 a sleek modern aesthetic. In real steel-rifles, fluting helps disperse heat from the barrel, as well as keep the barrel's weight down. At the end of the barrel is a 14mm female CCW thread for use with attaching tactical muzzle devices, such as flash hiders, suppressors and tracer units. Included is a thread cap if you don't fancy running any muzzle devices and like to keep things simple.

19.00 kr.
Was 29.00 kr.
Save 10.00 kr.
  • Steel construction
  • Improves recoil & FPS
  • For Tokyo Marui M&P9 GBB

If you want more recoil and higher muzzle energy from your Tokyo Marui M&P9 GBB, the CowCow 150% Hammer Spring for TM M&P9 Series is what you need. This replacement hammer spring is rated at 150% of the strength of the original spring, meaning your hammer will hit the knocker valve harder and release more gas, translating into harder felt recoil and higher FPS. Naturally, this will shorten the lifespan of your M&P so proceed with caution if this is your first time upgrading a GBB pistol. 

39.00 kr.
Was 79.00 kr.
Save 40.00 kr.
  • For Marui G3 AEGs
  • Replacement Standard Nozzle
  • High Quality Replacement Part

A replacement air nozzle intended for Tokyo Marui G3 based Airsoft Electric Guns constructed from polymer, an excellent spare part designed to replace damaged air nozzles with a durable replacement.

69.00 kr.
Was 89.00 kr.
Save 20.00 kr.
  • Upgrade spring
  • 100 m/s - 328 FPS
  • For TM PSG-1 only

This Guarder upgrade spring is compatible with the Tokyo Marui PSG1 gearbox and provides approximately 100 m/s or 328 FPS muzzle velocity on a 0.2g BB. The spring is made from tempered Si-Cr alloy steel wire to provide the strength and resistance necessary.

79.00 kr.
Was 99.00 kr.
Save 20.00 kr.
  • Heat Resistant
  • Copper Contact
  • For Range of AEGs

A series of Selector Plates from Modify, which are available for a range of AEGs.

75.65 kr.
Was 89.00 kr.
Save 13.35 kr.
  • High density polymer construction
  • Replacement original part
  • Stock mount/hinge for CZ 805 BREN

If your CZ 805 is looking a bit battered, now may be the time to fix 'er up! The ASG Replacement Receiver Stock Hinge is a replacement original part for the ASG CZ 805 BREN AEG and is the part you need if your stock no longer locks into the deployed position. This is the receiver side of the stock mechanism and is constructed from high density polymer.

92.65 kr.
Was 109.00 kr.
Save 16.35 kr.
  • Alloy construction
  • Original replacement part
  • Fits KJW and LS B9 GBB pistols

Had a little mishap when taking your B9 GBB apart? KJW have just the thing. The B9 series GBB magazine catch is an original replacement part, and fits both the KJ Works B9 GBB series and the LS B9 GBB series. The set includes the magazine release and its spring.

Though it is designed by KJW for their B9 GBB series this mag catch may be compatible with other B9 GBBs but we aren't able to test this so please consider carefully before buying.

109.65 kr.
Was 129.00 kr.
Save 19.35 kr.
  • OEM Part
  • For AM002 - 006
  • Great Spare Part

A drop-in fit OEM manufactured replacement handguard, compatible with the Amoeba range of M4s, from AM002 through to AM006.