- CNC 7075 T651 Aluminium
- Cut for 8mm bushings/bearings
- MOSFET/ETU Compatible - No mods needed
If you're working on a high-speed or high FPS build, the Delta Armory Version 2 CNC 8mm QSC Gearbox Shell will save you a lot of heartache in the long run! This ultra-strong version 2 gearbox shell is CNC machined from the best aluminium around, known as 7075 T651. This means if you're running a super strong spring or going for a dual-sector gear build, this gearbox shell has what it takes to keep running in the long term, being considerably stronger than standard alloy gearbox shells.
The QSC Gearbox shell also features radiused cylinder window corners to better distribute force and is pre-cut for Gate TITAN/ASTER, Perun Hybrid or Delta Armory ETU MOSFET systems, meaning no need to get the Dremel out to add advanced functionality. The bearing ports are 8mm in diameter, making this the perfect host for Bolster Armouries EZO Ball Bearing Bushings. If you're reaching for the stars when it comes to performance and want your build to last more than a few bursts, the Delta Armory Version 2 CNC 8mm QSC Gearbox Shell is what you need!
Fast Delivery
Delivery & Postage
Here at Patrol Base, we send all our packages from our Warehouse based in the UK with the exception of European Warehouse Items. All of our parcels are sent with specially picked couriers to ensure your parcels get to you on time and in one piece.
For more information please check out our Delivery Information Page.
Estimates
Below are some rough postage prices for orders. Please note these are subject to change and are only a rough guide. For a more accurate postage estimate please use the Postage Calculator at the basket.
UK Standard
£6.95
From
UK 24hr Dispatch
£8.95
From
Highlands / Islands
£24.99*
From
* Please note that Scottish Highlands, and Islands postage prices can vary wildly. Please refer to the Postage Calculator at the basket for the lowest possible price.
Returns
We want you to be absolutely happy with our products and services, so we provide the simple Patrol Base guarantee: if on receiving your item you are unhappy with your item for any reason then simply send it back to us. We will replace or refund the item.
You can return any item for any reason whatsoever, even if you have just changed your mind, within 14 days of receipt of the order. This is in addition to your rights under the Consumer Protection (Distance Selling) Regulations 2000.
For more information on returning products, and how to do it please visit our Returns Policy Page.
Description
If you're working on a high-performance build and need it to last, the Delta Armory Version 2 CNC 8mm QSC Gearbox Shell is essential! This reinforced version 2 gearbox shell is made from CNC machined 7075 T651 aluminium, providing a considerable strength improvement when compared to standard alloy gearbox shells, ideal for DMR, DSG or other high-stress build objectives.
Setting aside its gorgeous gold finish, the QSC gearbox is flawlessly machined, with perfectly smooth piston and tappet plate tracks to reduce friction for maximum efficiency. The bearing holes are 8mm in diameter, meaning 8mm bearings or bushings are required to complete the build. We recommend Bolster Armouries EZO Ball Bearing Bushings as they are the perfect size and perform fantastically.
The QSC Gearbox Shell is also pre-cut to allow Gate TITAN/ASTER, Perun Hybrid or Delta Armory ETUs to be installed directly, with no extra modification required. All wiring routes are enlarged, ideally suited to low-resistance wiring with its wider gauge. The rear of the gearbox is also cut for a quick change spring guide, being directly compatible with Delta Armory spring guides. The left side of the shell also includes enlarged witness windows to simplify the shimming process and a port through which you can release your anti-reversal latch.
If you need a gearbox shell which can withstand the extreme forces generated in high FPS DMR or high rate of fire DSG builds, the Delta Armory Version 2 CNC 8mm QSC Gearbox Shell is probably the best value option on the market, with no compromises when it comes to strength!
Features
- CNC 7075 T651 Aluminium
- Version 2 Gearbox shell - For M4/AR-15, G3 and SMG-5/MP5 AEGs
- Flawless Gold finish - Looks positively beautiful
- Cut for 8mm bushings/bearings - 8mm bushings/bearings required
- Enlarged wiring routes - Ideal for low-resistance wiring
- Enlarged witness windows - Simplifies shimming
- ARL Release port - Allows you to release your anti-reversal latch easily
- Compatible with Gate TITAN/ASTER, Perun Hybrid and Delta Armory ETU - No modification needed!
- Quick change spring compatible - Works with Delta Armory spring guides and some others
Package Includes
- Delta Armory Version 2 CNC 8mm QSC Gearbox Shell
Specification
General
|
Parts & Accessories Type
|
Electric Internal Parts, Internal Parts,
|
|---|---|
|
Internal Part Type
|
Gearbox, Gearbox Shell,
|
 |
 Custom Parts
|
Weight and Dimension
 |
Approx. 0.13kg
|
|---|
Construction
 |
Gold
|
|---|---|
 |
CNC 7075 T651 Aluminium with steel screws.
|
|
Internal Part Construction
|
7075 Aluminium
|
Part Specific
|
Part for Power Source Type
|
Electric
|
|---|---|
|
Package Includes
|
|
Electric Part Specific
 |
V2 Gearbox
|
|---|---|
|
Gearbox Version Compatibility Variant
|
Version 2
|
Size guide
Parts Fitting
Upgrades and Downgrades should only be undertaken by experienced players, or Airsoft Technicians. Please note, changing any internal parts of a weapon voids its warranty unless done in-house by our staff.
Please ensure that when fitting parts the part purchased is the correct part, as once a part has been fitted we cannot accept return.
We do know that players love to tinker, so we're here to give you help should you require it, and if needed you can get in touch with our workshop for more help!
Unique Parts
Please note that some parts may be unique to a specific brand of weapon. For example: Parts for an ASG M4A1 may not fit an ICS M4A1.
Parts from the same brand typically have a high chance of fitting, though be warned, some replicas use unique parts, so please ensure the part will fit before you attempt to fit it.
If you require help with fitting any parts feel free to get in touch with us via our Contact Us Page.
For more information with fitting parts, or should you require help, feel free to get in touch with our Workshop Department via our Contact Us Page.
Terms and Conditions relating to parts fitting can be read on our Terms and Conditions Page.