Delta Armory DA-C06-EGL CHARLIE™ Silent Ops M4/AR-15 AEG

If a lightweight M4/AR-15 AEG is on your shopping list, the Delta Armory DA-C06-EGL CHARLIE™ Silent Ops M4/AR-15 AEG is one of the best newcomers to the market we've seen yet! Equipped on the inside with the same reinforced internals as the original CHARLIE™ series, this new variant is equipped with the EAGLE™ programmable MOSFET system on the inside, an opto-magnetic ETU offering a wide variety of programmable fire mode options along with adjustable pre-cocking, trigger sensitivity and active braking for the technical types!

You may have seen this style of AR before, but the Delta Armory example has surpassed previous examples in our opinion. Inside, you will find a 6.03mm tightbore barrel and rotary HOP-up unit along with a pre-upgraded gearbox featuring an SHS tappet plate and piston, 7mm bushings and a quick change spring guide for easy power tuning.

The new EAGLE™ ETU/MOSFET is the star of the show, offering unprecedented programming options using only the fire controls of the AEG itself. Options include 3 or 5-round burst mode, binary trigger, sniper delay, AUG mode, semi-auto only and precocking. Thanks to its quick change spring system, the DA-C06-EGL can be an assault rifle one day and a DMR the next!

Starting at the front end we can find a pre-installed suppressor which covers the 380mm 6.03mm tightbore inner barrel, mounting to the 7.5-inch alloy outer barrel. This gives the DA-C06-EGL Silent Ops the look of an integrally suppressed AR with a compact front end which makes it easy to take corners in CQB. The suppressor mounts to 14mm CCW male threading but due to the inner barrel length, a barrel extension will be required to mount a tracer unit.

Surrounding the suppressor we have a polymer 20mm Picatinny quad-railed handguard with 20mm rails at the 3, 6, 9 and 12 o'clock positions, ready for any 20mm accessories you choose to add to complete your mission. Styled after the real steel KAC RIS, the handguard has a realistic look and unlike similar integrally suppressed platforms with KeyMod or M-LOK handguards, you will never have trouble mounting mission essentials to the quad rail of the DA-C06-EGL as it doesn't require clearance between the handguard and suppressor. 

The receiver follows the familiar M4/AR-15 format but is styled up with some unique Delta Armory flair. Constructed from high-density polymer with angled surfaces and gripping texture on the front of the magazine well, this receiver is rocking the "billet" aesthetic, mimicking real enhanced AR-15 receivers constructed from a single block of aluminium. The finish on the receiver is consistent and strong enough to resist scratches more effectively than most metal receivers, making the DA-C06-EGL ideal for those who skirmish like a bull in a china shop!

The fire selector can be found on the left side, positioned just above the pistol grip for fast access from a firing grip. The selector provides 3 modes of fire; Safe, semi-auto and full auto, with a 90-degree throw between each mode. The modes are all indicated with modern bullet pictograms, with a crossed-out projectile for safe, a single projectile for semi and multiple projectiles for full auto. The magazine release is on the right side of the magazine well and is easily reached from a firing grip with the trigger finger, allowing for super swift emergency reloads and the enviable handling the M4/AR-15 platform is known for.

The mock bolt catch is located in the centre of the left side of the receiver, and while this is a dummy control which doesn't provide a function it is nonetheless a separate part to maintain the realistic appearance and avoid the tell-tale signs of being a replica. The dummy forward assist is present on the right side of the upper receiver, right where it should be. This control does nothing on an AEG, and some real AR shooters argue it does nothing on the real thing, but it is included on the DA-C06-EGL to keep the rifle faithful to real M4/AR-15 rifles.

The charging handle is located at the top rear of the receiver and doesn't need to be pulled before the first shot. It instead serves to retract the mock bolt carrier and open the dust cover on the right side of the upper receiver, giving us access to the rotary HOP-up unit inside. The HOP-up allows you to tune the flight path of your BBs and set the DA-C06-EGL up for different ammo weights, looking for the flattest trajectory possible. The use of the rotary adjuster style is a nice touch and futureproofs the DA-C06-EGL with the most modern HOP-up design for the M4/AR-15 platform, boasting an improved ability to hold its setting under the vibrations of firing and being adjustable in finer increments than the older "gear" adjuster design.

The pistol grip of the DA-C06-EGL boasts a refined grip angle for greater comfort when shooting with the stock fully collapsed and in more modern shooting stances. Each flank of the pistol grip includes fine crackle texturing, with additional linear texture on the front and back straps for perfect wet weather handling. The trigger is known by Delta Armory as the CNC Type A Flat trigger, offering a flat serrated front surface with a short finger ledge, ideal for rapid double taps.

At the rear of the receiver, we come to the steel CQD style sling plate, which offers ambidextrous functionality with single-point slings; perfect for left or right-handed shooters. The steel construction of the sling plate practically guarantees no matter what you choose to mount to the plethora of 20mm rails on the DA-C06-EGL, the sling plate will be strong enough to support the weight.

To the rear of the sling plate, we come to the M4/AR-15 buffer tube, which is constructed from the same strong high density polymer used for the receiver. The buffer tube offers 6 positions of stock adjustment for the pre-installed Delta Armory battery stock, allowing you to set the stock at the perfect length to suit your body type and loadout. 

The stock itself is a slimline design unique to the latest releases from Delta Armory. Featuring a QD sling socket on either side, a low-profile adjustment lever on the bottom together with conventional "footman loops", aka sling slots, the highlight of this stock is its rubber butt plate featuring lattice checkering and an angled section at the toe for providing grip in the most modern shooting stances, with or without body armour. If you have a preferred stock design, the stock can be swapped for alternative M4/AR-15 AEG stocks if you want to change up the looks!

The buffer tube also serves as the battery compartment for the DA-C06-EGL. To access the battery compartment, you will need to pull the stock adjustment lever (located on the bottom of the stock) out and hold it in place, after which you can slide the stock off the buffer tube, revealing a Deans/T-Plug battery connector inside. We recommend a 7.4V 1450mAh LiPo in stick configuration for the DA-C06-EGL though you may need to keep the stock extended to fit this battery inside. Delta Armory recommends a LiPo battery measuring 1.4 x 1.9 x 10 cm approximately for full functionality of the sliding stock. 

On the inside, we are treated to some decent pre-upgraded parts, even in this CHARLIE™ line platform. The gearbox shell is reinforced to cope with stronger springs and the spring guide is a quick change example making power tuning a breeze. Inside the version 2 gearbox, we have an SHS piston with a full rack of steel teeth and an SHS tappet plate to guarantee reliable feeding. The gearset is constructed from steel with an 18:1 ratio, and the gears themselves run on 7mm bushings for a smoother, unlaboured gearbox report. 

The new EAGLE ETU/MOSFET system takes centre stage, offering more programmable options than ever before, including 3 or 5-round burst mode, binary trigger, sniper delay, AUG mode, semi-auto only and precocking. The ability to program this wide variety of modes using the trigger and selector of the gun itself gives the DA-C06-EGL the edge over practically any other platform in this price range. To provide the accuracy needed to deal with long-range foes, the DA-C06-EGL is equipped with a 6.03mm tightbore inner barrel offering higher FPS with the same spring and improved accuracy potential. 

If you love an affordable AEG platform packed with advanced features, you'll love the new EAGLE ETU-equipped AEGs from Delta Armory. This, the DA-C06-EGL Silent Ops M4/AR-15 is perfect for those with a stealthy playstyle looking for an AEG with a look to match!

Features

• 6.03mm Tightbore inner barrel - Great accuracy potential 
• EAGLE MOSFET/ETU Pre-installed - Programming instructions on a QR code in the buffer tube
• 14mm CCW Male threaded outer barrel - Tracer/suppressor ready, barrel extension may be required
• Flip-up iron sights pre-installed - Mounted to the top rail, press textured buttons to flip up
• 20mm Picatinny quad rail handguard - Compatible with 20mm Picatinny accessories 
• Extended charging handle latch - Easy access to the HOP-up unit for adjustment
• 20mm Picatinny railed receiver - Ready for a red dot sight or rifle scope
• Rotary adjustable HOP-up unit - Easy to adjust in fine increments, holds its setting well long-term 
• 6-Position M4/AR-15 buffer tube - Adjust the stock to suit your body type perfectly
• Delta Armory EAGLE stock - QD sling sockets on each side
• Ergonomic pistol grip with reduced grip angle - Great for modern shooting stances, very comfy
• Reinforced version 2 gearbox - 
  • SHS Piston with steel full tooth rack
  • SHS Tappet plate
  • Quick change spring guide
  • Steel 18:1 gearset
  • 7mm Bushings
  • EAGLE™ Programmable MOSFET/ETU
• EAGLE™ MOSFET Functions:
  • 3 or 5 Round burst mode
  • Binary trigger
  • Semi-automatic only
  • Sniper delay
  • AUG Mode
  • Active braking
  • Pre-cocking
• EAGLE™ Programming instructions available here
• Rear wired - Deans connector - Recommended battery: 7.4V 1450mAh LiPo in Crane/Nunchuck config.
• Compatible with M4/AR-15 AEG magazines - Plenty of spares available

Package Includes

• Delta Armory DA-C06-EGL CHARLIE™ Silent Ops M4/AR-15 AEG
• 120rnd Mid-cap magazine