CYMA Airsoft

If you like the compact form of the SMG5K but are a 21st-century Airsoft combatant and you require ultra-modern features to complete your mission, the CM.041L was designed with you in mind. This AEG takes the already impressive full metal CM.041K platform and adds an M-LOK handguard, M-LOK 20mm Picatinny hybrid optics rail and an ambidextrous magazine release which can be actuated using the trigger finger from a firing grip for a smooth and fast emergency reload. On the inside this AEG has the Platinum high speed upgrade treatment, boasting a high speed motor, high speed gear set and an ETU/MOSFET pre-installed for a spectacular rate of fire and trigger response. Also inside you'll find a tight bore inner barrel for extra accuracy from this compact AEG submachine gun.

Looking to give your VSR-10 platform Sniper rifle a bit more range? The CYMA Upgrade set for CM.7061/VSR-10 will give you what you seek, with the added benefit of including reinforced parts! The set includes the piston, piston head and spring guide, all of which are machined from aluminium and finished in metallic blue, and a seriously high power spring which gives out approximately 575 FPS when installed! This set is compatible with most VSR-10 clone sniper rifles, including the JG BAR-10, CYMA CM.701 and the Well MB02/03/05/07/10.

You shouldn't need to reload often when sniping, unless you are a bad shot! Regardless of this, it's always wise to have a spare mag on hand for extended skirmishes rather than panic under fire trying to load BBs as the enemies BBs shower down upon you! Introducing CYMA's spare magazine for the CM.702 M24 rifle. This magazine is constructed from polymer and holds 28 rounds. The magazine can be loaded either by hand or with a speed loader. 

If you want a long-boi magazine for your B9 AEP but you hate battle rattle giving you away, this mag was made to meet your needs! The CYMA 80rnd Long Mid-cap Magazine For CM.132/126 B9 AEP follows the external format of the CYMA AEP High-caps but is a rattle-free spring loaded mid-cap which should keep those with a more sneaky playstyle at the top of their game.

The magazine is loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod and holds 80 6mm Airsoft BBs; a significant increase over the standard AEP magazine. Compatibility-wise, this magazine is suitable for the CYMA CM.126, CM.126S, CM.132 and CM.132S B9 style AEPs and is unlikely to work in other designs.

If you want more ammo on your AK but drum mags aren't your thing, this mag very well might be! The CYMA 1100rnd Electric High-Cap Dual Magazine for AK47/74 AEG is styled after a pair of real steel 7.62 x 39mm magazines clamped together with a mag coupler, complete with detailed dummy cartridges for a more realistic look. This magazine should be compatible with any AK47/74 AEG rifle but is ideal for 7.62 x 39mm chambered AK replicas such as the original AK-47, AKM and AK-103, to name but a few!

This magazine holds an incredible 1100 BBs and can be wound up in 3 different ways; using the winding button, the manual winding wheel just like any other high-cap, or via the sound control function which will wind the magazine as it detects you shooting. 

Filling the mag can be done through the fill window on the top of the mag body and the manual winding wheel is on the baseplate, as it is in most high-cap mags. The button which controls the auto-winding/sound control function can be found on the left side of the dummy magazine, and if you want to wind the mag using the winding wheel make sure you have this switch in the central (off) position. To power the magazine you will need 3 x AAA cells (not included) but if you don't have any lying about the night before the skirmish you can always use the winding wheel and stay in the fight with a whopping 1100 rounds at your disposal!

If you are rocking a modernised AK AEG these magazines will suit it well! The CYMA 140rnd "Waffle" Mid-Cap Magazine for AK AEG is patterned after real steel Bulgarian AK-47 magazines also sold in the US under the brand "Circle 10". The magazine has waffle texture on the outside to promote positive grip and is constructed from rigid high density polymer, meaning an accidental drop doesn't result in scratches! If you need AK mags for a PMC or modern mercenary loadout, these are perfect!

An electric powered non-blowback Airsoft pistol, also known as an AEP (Automatic Electric Pistol), designed to function and work like the popular Hi-Capa style pistol.

A Full Metal Airsoft Shotgun which is Tri-Burst and Spring Powered, meaning it will throw 3 x BBs down range towards your target with each pump of the Shotgun (and pull of the trigger). This tactical variant comes supplied with a 12ga Choke and 20mm Receiver Rail.

If you're preparing for jungle warfare or you're a fan of iconic 20th-century firearms designs, the M16A1 is what you need! The CYMA CM.009B is a near-perfect replica of the real steel M16A1, the refined version of the original M16 which replaced the M14 in US Army and Marine Corps service. Boasting full metal construction and some serious attention to detail, the CM.009B is perfect for reenactment or skirmishers who love a classic with performance to rival the best.

Inside, you will find exactly what you might expect for a CYMA Platinum AEG. The Version 2 gearbox is equipped with a ball bearing spring guide, a polycarbonate piston with a full steel tooth rack, a CNC aluminium silent piston head, a CNC aluminium silent cylinder head and steel gears running on 8mm ball bearing bushings. All these upgraded parts are backed up by a high torque Neodymium magnet motor and the CYMA Platinum MOSFET, providing exceptional performance in every aspect. If you're born to kill and walk the walk, the M16A1 is calling your name.

*Fortunate Son plays quietly in the distance*

A Pump Action, Spring Powered Tri-Burst Airsoft Shotgun, which accepts an Airsoft Shotgun Shell inside the breech, and will fire three BBs which each Trigger pull. This tactical variant comes supplied with a 12ga Choke and 20mm Receiver Rail, as well as a Shell Holder, Speedloader and Shotgun Shell.

If you are after a lightweight, simple suppressor to add to the look of your AEG, rather than dominating it, the Dummy sound suppressor from CYMA may be just what you need!

For those of you that prefer a more classic AK style, this magazine sports the old school Bakelite look for a more authentic loadout. The magazine holds 450 rounds and is a high-cap design in that it is wheel-wound at the bottom, meaning that you can get a tonne of shots in without having to swap mags.

The magazine also features a ridged texture on the front of the mag to allow for better grip when loading/reloading.

If you are looking for an affordable AR36C replica the CYMA CM.011 is the perfect thing. This AEG is competitive straight out of the box, shooting at 315fps and very accurate on our indoor range. This is a perfect starting AEG for someone with a run-and-gun play style who will appreciate the low weight and advanced design of the AR36 platform.

Airsoft 6mm BB Gun built by CYMA in China to replicate the American M14 Rifle. The weapon features full Alloy Internals, Receiver and Barrel, with a Polymer Stock and Heat Shield.

Building a speed demon of an AEG? You will need high speed gears to get the most out of it! The CNC steel High Speed Gearset from CYMA has a 13:1 ratio, which means every 13 motor turns the gearbox will cycle once, which is a step faster than standard 18:1 Airsoft gears. These gears pair perfectly with a high speed motor to provide a demonic rate of fire, as can be seen in the latest upgraded versions of CYMA's Platinum series AEGs. This gearset is designed for use with M120 springs and below only, so should be fine for most UK legal Airsoft AEGs but is not suitable for a DMR rifle with high FPS. This gearset is a version 2/3 set so should work in any AEG with a V2/3 gearbox and many others which share the same gears.

If you're getting gassed up for the GBBR season and you're running a CGS or TM ZET system GBBR, fill your rig with these! The CYMA 30rnd Green Gas Magazine for M4/AR-15 CGS & ZET GBBR is compatible with both CYMA CGS and Tokyo Marui ZET system M4/AR-15 GBBRs and is a green gas magazine with the fill valve on the rear of the steel STANAG style body.

The mag can be loaded through the feed lips at the top of the magazine, though this can be challenging with a standard speed loader without a GBBR adapter. As with the original TM and CYMA GBBR magazines, these mags include the bolt stop components which lock the bolt open at the end of a mag, and each mag holds 30 BBs. 

If you are running an AEP and you want a polymer retention holster here is your opportunity! The CYMA Polymer Retention Holster is designed to fit the CM.126, CM.126S and CM.132S AEPs. This holster holds your pistol in place via a polymer tab which indexes with the trigger guard, keeping it nice and secure as you run and ready for a fast draw when you press the button on the outside.

The holster itself is supplied mounted to a polymer "paddle" mount which will fit any belt of up to 2" in width and mounts via a rotary interface, meaning it should be compatible with rotary interfaces on MOLLE holster mounts, shoulder harnesses and belt mounts of different styles and draw heights. The rotary interface allows you to set your preferred draw angle using the included Allen key by loosening the bolt in the rear of the mount, repositioning it and tightening the bolts back down, giving you many more options than a standard fabric universal holster. Finally, AEP users are no longer held back by a lack of modern holster options!

An Airsoft 6mm BB Gun which takes a base platform M4, then adds a fancy Handguard System to give this AEG a unique look and feel. This M4 replica is constructed mainly from Polymer, with a Polymer Receiver, Stock, Buffer Tube, Handguard, Flash Hider and Sights, with an Alloy Outer Barrel and Internals.

An Airsoft Electric Pistol which is based on the 226 series Pistols, and features a MOSFET for a rapid rate of fire and consistent performance.

An Airsoft Electric Pistol which is based on the 226 series Pistols, and features a MOSFET for a rapid rate of fire and consistent performance.

Is your SMG-5/MP-5 looking left out amongst its railed-up brethren? Here is the solution! It's all included in the box, a 20mm rail system, 2 rail covers, and a vertical grip to stop those sexy rails from slicing your hands to pieces. Cyma even throw in a metal outer barrel! It is not essential to install the outer barrel to make the rail system compatible but it is nice that it is included!

If you are after a modern sniper rifle platform with a cutting edge look and upgraded internals straight out of the box, the CYMA CM.708-U should be right up your street! This rifle is the upgraded version of the original CM.708 and boasts a steel cylinder with a low friction coating, a brass cylinder head, an aluminium piston with a rubber shock-absorbing pad and a 90-degree piston catch/sear. 

These components combine to improve the lifespan of the CM.708 and improve its air seal qualities and reduce friction in the action for a higher quality feel and an easier bolt pull. Why not save yourself the trouble of upgrading your sniper rifle and get one with all the trimmings straight from the factory?

If you have an AK, but you ain't no Russian, this is the magazine you will probably want. The Modern Mid-cap Magazine from CYMA is compatible with most Airsoft AK47/74 series AEGs and is patterned after modern AK rifle magazines sold on the US civilian market. This magazine is straight in profile, making it realistic for AK rifles in 5.56mm and 5.45mm Russian, and its waffle style external ribs provide the modern look and superb gripping qualities, ensuring you have a firm grip on your magazine during a fast reload. The magazine is constructed from polymer with a steel feed spring, and can be loaded through the fill/feed port on the top of the magazine body using a speed loader or loading rod.

A Mid-Cap Magazine for SR-25 / AR-10 Platform Rifles that accept a 7.62x51mm STANAG Magazine. It is a Spring Powered Magazine that is filled using a Speedloader, and will feed until empty without any rattle. With a Steel Outer Shell, this is a seriously strong and realistic Magazine, which is perfect for staying in the fight for longer without refilling. As an added bonus, it is compatible with CYMA, A&K as well as Tokyo Marui branded Rifles.

Need somewhere to store that THICC battery? This will do the job. Made from strong polymer this battery case weighs next to nothing meaning less overall weight when you add your battery. This battery box attaches to any 20mm RIS system but its slim and long design is optimized for SMG-5 variants with 20mm RIS systems installed.

Looking for AK74 magazines for a Soviet-era loadout? The 150rnd Mid-cap in Bakelite Orange from CYMA is constructed from polymer which is dyed to match the Bakelite magazines issued with the earliest variants of the AK74 rifle to the Soviet Army. This magazine is a spring loaded mid-cap and can be loaded through the fill/feed port at the top of the magazine body, using either a speed loader or a loading rod/tool. The advantage of mid-cap magazines is that they do not rattle, and can be an asset to a sneaky player who wants to move fast and still get the drop on the enemy team. This magazine is a 5.45x39 style magazine and is most appropriate for an AK74 or AKS74U AEG but will fit and feed in most AK platform AEGs.

If you want the front end your AK Airsoft gun to have the vibe of a medieval war mace, this muzzle brake should do the trick! The CYMA DTK-3 Russian AK Muzzle Brake is constructed from steel and replicates the real Zenitco DTK-3, one of the latest enhancements for the AK platform, straight out of Russia. The brake follows the typical Zenitco aesthetic of pure aggression and combines a large 3-port muzzle brake with a glass breaker front to form one of the most menacing muzzle devices we have seen yet.

The brake is threaded for 24mm CW Russian AK threads and also includes a 14mm CCW male thread adapter, making it compatible with almost any Airsoft AEG or GBBR. If you want your primary to make the enemy team shake in their boots, this is your best shot!

It's the submachine gun that can be fired from a brief case! At just 33cm long, the CM.041J is a replica Airsoft gun which blurs the lines between Submachine gun and Machine Pistol.

Looking for a sneaky SMG? The CYMA CM.041 SD6 is a full metal version of the sneaky SMG-5 we all know and love which has been upgraded with CYMA's BLUE Edition internals, making it as rock solid on the inside as it is externally. All of the internal upgrades are focused on reduced friction and lower stress, meaning the BLUE Edition CM.041 SD6 should provide a lifetime of superb performance and is fully compatible with aftermarket upgrades for those who want a bit more. As it comes, the rate of fire and trigger response is spectacular for an AEG without a MOSFET and is a significant step up from other SMG-5 SD6 AEGs on the market. 

The real-world version of this submachine gun has been used by US Navy SEALs and UKSF in various special applications and has an iconic look which simply cannot be imitated, as much as the M4 platform tries to (Honey badger *cough*). If you want an SMG which is milsim appropriate with a plethora of internal enhancements built right in, the CM.041 SD6 would be a great tool for the task.

Whether you are stalking through the jungle in search of the VC or fast roping from a Blackhawk over Mogadishu, the CM.009F from CYMA would be a fine companion. This full metal AEG replicates the XM177E2, one of the earliest AR-15 carbines which saw service with US special forces during the Vietnam War right through to the mid-1990s. While it may be long out of service with the Yanks, this platform is still often seen in the hands of movie mercenaries (Blood Diamond style) and the Israeli special forces.

Being an AEG of the CYMA Platinium line, the CM.009F is absolutely kitted out on the inside with pre-upgraded parts. The inner barrel is a 6.03mm tightbore promising above-average accuracy potential and the HOP-up is of the latest rotary design but constructed from alloy for maximum strength. The gearbox is a version 2, equipped with steel gears running on 8mm ball bearing bushings, a CNC aluminium piston head, a CNC aluminium cylinder head, a stainless steel cylinder and a polycarbonate piston with a full steel tooth rack. Tying this selection of high end internals together is the CYMA Platinum MOSFET, offering active braking, improvements in electrical efficiency and the ability to use 11.1V batteries.

If you are looking for the old-school experience on the outside with cutting-edge parts on the inside, the CYMA CM.009F XM177E2 is ideal for you!