CYMA Airsoft

A non-blowback Airsoft 6mm BB Electric Pistol which is based upon some of the World's most popular pistols, with all of the best bits taken and combined to create one unique pistol which is highly ergonomic.

An Airsoft 6mm BB AEG Light Machine Gun, designed for a Support Role, and is based on the Russian Built RPK-74. The weapon features a real wood Stock and Handguard, with a full Alloy Body and Internals, with a Polymer Pistol Grip and Imitation Bakelite Magazine. 

If CQB is your poison, you are going to love this one! The CM.106A AR-9 from CYMA adds to the increasingly wide range of AR-9 platforms available, making the decision on which platform to go for that much harder! The CM.106A sports full metal construction, a pre-installed electronic trigger unit with MOSFET, a high-speed motor, and internals which have been upgraded even beyond the already impressive "Platinum" internal setup.

Want to keep your Airsoft rifle looking like its real steel counterpart? Then this realistic muzzle break will help! The CYMA M4 Type Flash Hider For 14mm CCW Thread replicates the real M4 muzzle brake seen on service rifles and is constructed from alloy with 14mm CCW threading. Real muzzle brakes are designed to reduce felt recoil by redirecting gas out of the ports on each side, and although you won't get this effect with an Airsoft muzzle brake it will give your Airsoft rifle a modern, iconic look.

If you want to hot swap upper receivers like a real operator, now you can if you have a CYMA CM.097 AEG! The CM.097 Upper receiver is a replacement original part, and could be of use to someone wanting to freshen up an old AEG, or could be used to build a specialised replacement upper receiver so you can change your CM.097 length and battlefield role quickly and easily. The upper receiver comes with a pre-installed dust cover, charging handle, mock forward assist and mock bolt carrier, so no need to source these trim parts separately! This upper is a modern design with the squared off geometry and advanced look, making it a sure choice for a 21st century high speed M4/AR15 build.

If you are keeping your eye out for an M4 platform AEG which combines low weight with a long barrel for superb outdoors performance you can put it back in again, you have found a great option! The CM.612 from CYMA sports the usual rock solid internals from the CM.6xx M4 series but with a 16 inch outer barrel and the gorgeous KAC style URX-2 quad rail system to give it a dynamic and high speed look. The CM.612 would be an asset in an outdoors skirmish thanks to its long 6.03mm tightbore inner barrel, offering accuracy and range which is unattainable for shorter setups. If you do the majority of your Airsoft *beep* whipping in the woods, this AEG would suit you well. 

If you are keeping your eye out for an M4 platform AEG which combines low weight with a long barrel for superb outdoors performance you can put it back in again, you have found a great option! The CM.612 from CYMA sports the usual rock solid internals from the CM.6xx M4 series but with a 16 inch outer barrel and the gorgeous KAC style URX-2 quad rail system to give it a dynamic and high speed look. The CM.612 would be an asset in an outdoors skirmish thanks to its long 6.03mm tightbore inner barrel, offering accuracy and range which is unattainable for shorter setups. If you do the majority of your Airsoft *beep* whipping in the woods, this AEG would suit you well. 

Looking for a sneaky SMG? The CYMA CM.041 SD6 is a full metal version of the sneaky SMG-5 we all know and love which has been upgraded with CYMA's BLUE Edition internals, making it as rock solid on the inside as it is externally. All of the internal upgrades are focused on reduced friction and lower stress, meaning the BLUE Edition CM.041 SD6 should provide a lifetime of superb performance and is fully compatible with aftermarket upgrades for those who want a bit more. As it comes, the rate of fire and trigger response is spectacular for an AEG without a MOSFET and is a significant step up from other SMG-5 SD6 AEGs on the market. 

The real-world version of this submachine gun has been used by US Navy SEALs and UKSF in various special applications and has an iconic look which simply cannot be imitated, as much as the M4 platform tries to (Honey badger *cough*). If you want an SMG which is milsim appropriate with a plethora of internal enhancements built right in, the CM.041 SD6 would be a great tool for the task.

If you're an AK fan and you are looking for something bigger, the RPK is what you need! The CM.052A RPK-74M is a faithful replica of the latest variant of the RPK light support weapon, a lengthened and strengthened AK47 based design intended to provide a high volume of fire and increased accuracy at squad level. The CM.052A sports highly realistic construction with a plethora of steel parts, a full-sized dummy bolt carrier, a steel bipod and modern polymer furniture matching that which is currently issued to Russian armed forces. The RPK-74M takes standard AK47/74 AEG magazines, including drum mags, and comes with an extended 45 round style high cap magazine which holds a whopping 800 BBs!

A replacement Gas Tube for Airsoft AK models, constructed from Alloy to the original specification as a direct replacement. If you own an AK Model and need a replacement Gas Tube or are looking at making Handguard changes, you can't go wrong with a spare.

If you want to take your Airsoft AK AEG to the next level and give yourself some AR-style advantages, the Enhanced Safety Lever from CYMA will speed up your weapons manipulation and make up for the AK's "retro" ergonomics. This safety lever is constructed from steel and is compatible with most Airsoft AK AEG rifles on the market, and lets you switch fire modes using the trigger finger, without removing your hand from the pistol grip.

If you have dinged up your integral suppressor for your CM.041SD, fear not! You can have your sneaky beaky SMG looking great once again with this replacement original part from CYMA.

Looking to give your M24 platform Sniper rifle a bit more range? The CYMA Upgrade set for CM.702/M24 will give you what you seek, with the added benefit of including reinforced parts! The set includes the piston, piston head and spring guide, all of which are machined from aluminium and finished in metallic blue, and a seriously high power spring which gives out approximately 575 FPS when installed!

This set is compatible with most M24 sniper rifles based on the Classic Army design but is designed for the CM.702 series, and may need modification and tuning for other M24 platforms.

Short and compact like it's real world counterpart, but with some full metal weight behind it and some solid internals, it still packs a punch! 

This Airsoft stockless variation of the iconic M870 if for those of you for an operator's choice to clear rooms in CQB skirmishes and with it's satisfying pump action and tri-shot spread, enemy insurgents won't last long with this shotgun making quick work of them!

If your collection is missing a shotgun, now would be the time! The CYMA CM.360LM M3 Super 90 Long is based on the legendary Tokyo Marui tri-shot shotgun design but with full metal construction and a few added details to refresh the old but proven tri-shot design. This is the Long variant of the M3 Super 90, known amongst Airsofters for its role in the movie Heat (1995) and known in the real steel world as one of the most advanced and high quality military/law enforcement shotguns ever devised.

Working with a shotgun, whether you are indoors or outdoors, has its own set of challenges; ideal for the CQB pro who is bored of getting easy kills with their AEG. Like the sniper in the woods, the shotgun-wielding skirmisher must choose their shots and time their reloads just right, though the shotgun provides the advantage of having a higher hit probability thanks to its tri-shot configuration and a faster first shot when entering a room. If you are ready to get your pump on, you can't do much better than CYMA's full metal tri-shot range!

Whether you are upgrading your SMG-5 or repairing it, the CYMA CM.041G/CM.041H Complete Gearbox E-Edition High-Speed is a great excuse to do both at the same time! This gearbox is a Version 2, designed for CYMA CM.041 series SMG-5 AEGs but should fit most SMG-5 AEGs on the market (not SMG-5K) and also includes a high-speed motor of the long shaft variety.

As the heart of the CYMA E-Edition High-Speed Platinum AEG series, this gearbox is absolutely packed with upgraded parts. Highlights of the internals include the CYMA MOSFET/ETU system, steel high-speed 13:1 ratio gears, an aluminium silent piston head and cylinder head and a quick change spring system. Being a replacement original parts set, this gearbox is the exact setup found in the superb CM.041G and CM.041H AEGs, meaning if you have ever been envious of their performance you can now make your SMG-5 shoot just as nicely!

If you are building a version 3 AR36 gearbox or you have an old AR36 AEG that needs a refit, this spring set will be useful! The set includes all the springs needed to complete a version 3 gearbox for AR36 AEGs except for the mainspring (the spring that provides the power). Maybe you have lost a spring, or your tappet spring got chewed up after a long and hard life? This spring set should give you all you need to get your AR36 doing its dirty work once again!

If you like to keep spare parts on hand, are building a gearbox from scratch or have had a tappet plate failure, CYMA's Tappet Plate for V2 Gearbox is ideal. This tappet plate is designed for version 2 gearboxes and is constructed from polymer. As with all internal parts, we recommend doing your research before attempting to install this tappet plate or consulting a tech who can advise. 

Not a fan of SMG-5 dioptre sights? I'm not sure how, but if they don't suit you then here's a way you can still shoot sharp with your SMG-5/MP5 AEG. Allows mounting of red dot sights and shorter length magnified optics. Looks extra cool with an MRDS on!

A unique and imposing Steel constructed muzzle brake for your AR-15/M4/M16 replica, or any other weapon with a 14mm CCW threaded outer barrel.

If you run a modernised, tactical Airsoft AK AEG rifle you will probably want some equally modern magazines! The 130rnd AK47 Reinforced Polymer Mid-cap Magazine from CYMA sports a strong polymer shell with reinforcement ribs and widened gripping surface on the base of the magazine to aid in removing it cleanly from pouches. The magazine holds 130 6mm BBs and can be loaded through the fill/feed port at the top of the magazine using a standard Airsoft speed loader. This magazine is compatible with any standard AK style Airsoft AEG, but its steep curve is a tell-tale sign that this is a 7.62 style AK magazine, for those who are sticklers for the details!

If you are in the mood to build your own Honey Badger or PDW style M4/AR-15 this stock is an essential part! The CYMA PDW Stock for M4/AR-15 AEG fits the standard M4/AR-15 AEG rear receiver interface, replacing your usual buffer tube with a more compact alternative with a sliding stock mechanism built in.

The buffer tube in this set is constructed from alloy and the stock bars and locking latch are constructed from steel to provide strength and realistic weight. The butt plate is constructed from high density polymer with linear serrations to promote grip, and the set also includes the bolt and washer required to mount the stock. If you want to shorten your M4/AR-15 up for CQB duties, this is what you need!

An electric powered tactical 9mm SMG platform which offers a 20mm railed handguard, 14mm CCW threaded outer barrel as well as a solid stock with loads of battery space.

An Aluminium constructed charging handle extension for AK style replicas.

A high strength sling plate constructed from a dense Alloy that allows you to attach a sling to your AK47 platform weapon.

If you want sneaky styling for your CM.702 M24 or a tracer to light the enemy up, the CYMA Silencer Adapter for CM.702 M24 Sniper Rifle is what you need. This adapter replaces the front barrel cap, providing 14mm CCW male threads so you can mount the most common suppressors, tracer units and other muzzle devices on the Airsoft market. 

A Low Capacity Magazine designed for M14 AEG, where the player wants a magazine with a more realistic capacity. The Magazine is constructed from Alloy, with Polymer internals. 

Looking for greater mag capacity without having to wind? If you are rocking the support weapon version of the venerable AK platform, the RPK, or any AK Airsoft AEG, this magazine will suit your needs perfectly! This 140rnd mid-cap magazine is styled after the 45 round RPK-74 magazine issued with the support weapon version of the AK. The magazine holds 140 BBs and can be loaded through the fill/feed port at the top using a standard Airsoft speed loader, and is a spring-fed mid-cap, meaning you can sneak around with one of these on your rifle without giving your position away! The magazine is constructed with a polymer shell, steel feed spring and steel base plate, and is compatible with any standard AK47/74 Airsoft AEG rifle.

If you want to add some extra accessories to your AK but you approve of neither top cover mounted optics nor the Russian side rail, this railed gas tube should do the trick! Based on the real steel UltiMAK design, the CYMA 20mm Picatinny Railed Gas Tube for AK47/74 AEG replaces the gas tube and upper handguard of your AK AEG with an aluminium enhanced gas tube with a 20mm Picatinny rail milled into its upper surface.

This style of rail has found its way onto many AKs used in the hands of both PMCs operating in the middle east and civilian tactical shooters in the US and is a great way to mount forward mounted red dot sights and tactical flashlights without doing anything weird to the receiver itself. This part is designed for the CM.04x series of AK AEGs from CYMA but will not fit AKS-74U AEGs due to the length.

A Krinkov style Flash Hider/Amplifier for Airsoft Guns with 14mm CCW Threads. It is designed for an AK Platform Rifle, but will attach and fit to anything with a 14mm CCW Thread that you think looks good. The Flash Hider doubles up as an Amplifier, making your Airsoft Gun sound louder when installed. It is also compatible with standard AK threads by removing the inner sleeve/adapter.