CYMA Airsoft

An Alloy constructed Muzzle Brake for AK model replicas, which comes supplied with an adaptor to install it on any 14mm CCW thread.

An Aluminium constructed Mount for Airsoft SVD and SVU Platform Rifles, which connects to the Dovetail Side Rail and provides a perfectly-aligned 20mm Rail on top of your Rifle, for the attachment of Sights and Scopes.

A pre-assembled, ready to use complete gearbox set designed for use in 6mm Airsoft BB replica M14 AEGs. With all the components assembled and in place, this gearbox is ready to be dropped into place in your M14 AEG, replacing any old and worn out gearboxes.

An electric-powered pistol based on the classic 1911 by Browning. It is a MOSFET edition AEP which means a high rate of fire and consistent performance, making this a great choice for CQB/backup purposes.

An electric-powered pistol based on the classic 1911 by Browning. It is a MOSFET edition AEP which means a high rate of fire and consistent performance, making this a great choice for CQB/backup purposes.

This updated Airsoft Electric Pistol is roughly based on the comfortable EU Series, and offers a much better Rate of Fire and Performance than their standard equivalents. This version includes a MOSFET which 'amps' up the Performance with a faster Trigger Response, and the ability to dump an entire Magazine Fully Automatic in seconds.

This updated Airsoft Electric Pistol is roughly based on the comfortable EU Series, and offers a much better Rate of Fire and Performance than their standard equivalents. This version includes a MOSFET which 'amps' up the Performance with a faster Trigger Response, and the ability to dump an entire Magazine Fully Automatic in seconds.

An AR platform replica which is built from very tough High-Density Nylon Fibre Polymer, and features a MOSFET, Quick Change Spring and Microswitch Trigger, making this the absolute perfect Starter Gun.

If you are undecided when it comes to vertical grips and sometimes like the old-school ways, this Folding Vertical Grip from CYMA is ideal for you! Constructed from high density polymer with a steel folding mechanism, the Folding Vertical Grip can be mounted to any 20mm Picatinny rail via its spring-loaded QD mount. 

To mount the grip, simply push the textured end of the locking bar on the mount in and slide it onto the front of your rail. When you release the locking bar, the grip will stay right where it is. To fold and unfold, simply press the central screw-like button and position the grip in either the horizontal or vertical position. 

At the front of the grip, we are treated to a hand stop-like curved protrusion intended to prevent you from slipping off the grip and potentially shooting your hand; a useful feature if you mount this right at the front of a short-barreled platform. If you're looking for an affordable 20mm Picatinny grip solution with plenty of functionality, the CYMA Folding Vertical Grip is one to watch!

Sights set on modernizing your AKS-74U? CYMA have provided the solution in the form of an aluminium Keymod handguard set for their AKSU. Featuring Picatinny rail at 12 o'clock and keymod at 3, 6 and 9, there is no shortage of space here to add your spetznasy gear. 

If you are looking for a primary for your Vietnam war loadout this will do the trick! Complete with period accurate pencil barrel and 2 position XM177 style stock, the CM.009D M653 is the old school tacticool carbine from a time before the M4!

If you are the sneaky type of skirmisher and fancy using something Russian, the AKS-74U is calling your name! This bundle combines the superb CM.045 AKS-74U AEG from CYMA with a PBS-4 Suppressor and two spare 150rnd mid-cap magazines getting you ready to skirmish eastern style or as a mercenary/PMC. The PBS-4 is the caliber correct suppressor for the AKS-74U, giving you a professional setup which will impress the milsim inclined and avoid any of the "ACKCHYUALLY" moments. 

If you are looking for a primary for your Vietnam war loadout this will do the trick! Complete with period accurate XM177E1 sound and flash moderator and 2 position XM177 style stock, the CM.009D XM177E1 is the old school tacticool carbine from a time before the M4!

If you want to speed up your shotgun skills, this is a sure fire way to do it! The Cyma Front Fibre Optic Sight simply snap fits onto your barrel to provide a bright red glowing point of aim, without the need for batteries or power at all! This sight can either be used with a rear sight or on its own for up close and personal work.

If you have lost your AK AEG charging handle spring, rod or top cover retention latch you are in luck! The CYMA Charging Handle Rod & Spring Set for AK47/74 AEG is an original replacement part set for CYMA AKs but should also fit other Tokyo Marui clone AK series AEGs as well. The set includes the charging handle spring, guide rod and top cover retention latch.

If you're working on a modern tactical AK build, this is the ideal magazine to complete it! The CYMA 150rnd Bulgarian 5.56 Style Mid-Cap for AK47/74 AEG is constructed from brown tinted translucent polymer with a ribbed external design, showcasing mock cartridges inside for visual realism. 

Being an Airsoft mid-cap magazine, this mag holds 150 BBs loaded through the fill/feed port on the top of the magazine body using a speed loader or loading tool. Thanks to its spring-loaded internals, this magazine won't rattle as you run, making it perfect for stealthy playstyles. Whether you're building a 5.56 style AK or you run a modernised AK bristling with modern accessories and upgrades, complete your build with the CYMA 150rnd Bulgarian 5.56 Style Mid-Cap for AK47/74 AEG!

If you want to take your Airsoft AK AEG to the next level and give yourself some AR-style advantages, the Enhanced Safety Lever from CYMA will speed up your weapons manipulation and make up for the AK's "retro" ergonomics. This safety lever is constructed from steel and is compatible with most Airsoft AK AEG rifles on the market, and lets you switch fire modes using the trigger finger, without removing your hand from the pistol grip.

If you want to hot swap upper receivers like a real operator, now you can if you have a CYMA CM.097 AEG! The CM.097 Upper receiver is a replacement original part, and could be of use to someone wanting to freshen up an old AEG, or could be used to build a specialised replacement upper receiver so you can change your CM.097 length and battlefield role quickly and easily. The upper receiver comes with a pre-installed dust cover, charging handle, mock forward assist and mock bolt carrier, so no need to source these trim parts separately! This upper is a modern design with the squared off geometry and advanced look, making it a sure choice for a 21st century high speed M4/AR15 build.

A 6mm BB Airsoft Electric non-blowback Pistol, based on the iconic original 1911 pistol perfect for if you are wanting to get into Airsoft skirmishing. The CM.123 is a great starter pistol for beginners, or a budget friendly sidearm for when your primary is empty and need to get a quick draw on an opponent. 

Designed to be easy to use, right out of the box, this electric Airsoft 6mm BB gun let's you get into battle right away.

If CQB is your poison, you are going to love this one! The CM.106A AR-9 from CYMA adds to the increasingly wide range of AR-9 platforms available, making the decision on which platform to go for that much harder! The CM.106A sports full metal construction, a pre-installed electronic trigger unit with MOSFET, a high-speed motor, and internals which have been upgraded even beyond the already impressive "Platinum" internal setup.

If you've lost your mock cleaning rod, your AK will be looking odd! Here's what you need to fix that. The CYMA Mock Cleaning Rod for AK-47/74 AEG is designed for the CYMA CM.04x AK AEG series but should also fit other AKs from other brands which use the LCT or VFC build style. The rod is constructed from steel, and it goes without saying, you should never attempt to use this rod to clean the barrel of your Airsoft gun, it is only for the look!

If you have HOP-up woes with your SMG-5 this could be what you need to fix it up! The CYMA HOP-Up Chamber with Rubber and Nub for SMG-5 AEG is a replacement original part for the CM.027 SMG-5 series but should also work in any TM based SMG-5 AEG (not NGRS variants). The set includes a complete HOP-up unit with the HOP-up arm and also includes a basic HOP-up rubber and nub, giving you everything you need to replace the entire unit in a single package. 

This set is designed for the CM.027 which is a copy of the Tokyo Marui SMG-5 AEG and should also work with similar designs but is not compatible with the Classic Army SMG-5 or the later CYMA CM.041 series SMG-5 AEGs. 

An Aluminium constructed charging handle extension for AK style replicas.

A Tactical Assault Rifle Suppressor for Airsoft Rifles, rocking a 14mm CCW thread this classic suppressor style will fit right on almost any Airsoft Assault Rifle or SMG!

Looking to give your M24 platform Sniper rifle a bit more range? The CYMA Upgrade set for CM.702/M24 will give you what you seek, with the added benefit of including reinforced parts! The set includes the piston, piston head and spring guide, all of which are machined from aluminium and finished in metallic blue, and a seriously high power spring which gives out approximately 575 FPS when installed!

This set is compatible with most M24 sniper rifles based on the Classic Army design but is designed for the CM.702 series, and may need modification and tuning for other M24 platforms.

If you are keeping your eye out for an M4 platform AEG which combines low weight with a long barrel for superb outdoors performance you can put it back in again, you have found a great option! The CM.612 from CYMA sports the usual rock solid internals from the CM.6xx M4 series but with a 16 inch outer barrel and the gorgeous KAC style URX-2 quad rail system to give it a dynamic and high speed look. The CM.612 would be an asset in an outdoors skirmish thanks to its long 6.03mm tightbore inner barrel, offering accuracy and range which is unattainable for shorter setups. If you do the majority of your Airsoft *beep* whipping in the woods, this AEG would suit you well. 

If you are in the mood to build your own Honey Badger or PDW style M4/AR-15 this stock is an essential part! The CYMA PDW Stock for M4/AR-15 AEG fits the standard M4/AR-15 AEG rear receiver interface, replacing your usual buffer tube with a more compact alternative with a sliding stock mechanism built in.

The buffer tube in this set is constructed from alloy and the stock bars and locking latch are constructed from steel to provide strength and realistic weight. The butt plate is constructed from high density polymer with linear serrations to promote grip, and the set also includes the bolt and washer required to mount the stock. If you want to shorten your M4/AR-15 up for CQB duties, this is what you need!

If you are looking for a lil CQB monster AEG but shorty AR15's don't float your boat, the CM.041PDW is worth a look! Constructed from strong alloy in all the places the real one is, with a high torque motor and impressive performance right from the box, you can dominate the CQB field in a classier manner than ARP people with this classic PDW from Cyma. 

If you're an AK fan and you are looking for something bigger, the RPK is what you need! The CM.052A RPK-74M is a faithful replica of the latest variant of the RPK light support weapon, a lengthened and strengthened AK47 based design intended to provide a high volume of fire and increased accuracy at squad level. The CM.052A sports highly realistic construction with a plethora of steel parts, a full-sized dummy bolt carrier, a steel bipod and modern polymer furniture matching that which is currently issued to Russian armed forces. The RPK-74M takes standard AK47/74 AEG magazines, including drum mags, and comes with an extended 45 round style high cap magazine which holds a whopping 800 BBs!

An Airsoft 6mm BB AEG Light Machine Gun, designed for a Support Role, and is based on the Russian Built RPK-74. The weapon features a real wood Stock and Handguard, with a full Alloy Body and Internals, with a Polymer Pistol Grip and Imitation Bakelite Magazine.