Cybergun Airsoft

If you want to equip your Cybergun CANIK TP9 GBB with a red dot optic for faster target acquisition and a slick modern look, the Cybergun CANIK Optic Plate & Charging Handle Set; Docter/RMR Footprint is designed for just that! This set includes two optics plates, one with an RMR footprint and one with a Doctor footprint, giving you access to the two most common red dot sight footprints.

Also included is a charging handle which can be attached to either side of the optic plate via its threaded base, granting functionality for both left and right-handed shooters and lightening fast handling IPSC race gun style! This is ideal for those who run their pistol as a primary in CQB skirmishes but can be left off entirely if you want a more snag-free setup well suited to a combat sidearm. If you want to dress your CANIK up like all the Glock and Hi-capa users can, here is your opportunity!

If you're searching for your dream DMR base gun and that happens to be a SCAR, the Cybergun FN Herstal SCAR-H MK.20 TPR AEG is just what you need! This is the king of SCARs, known as the SCAR-H TPR (Tactical Precision Rifle) or MK.20 SSR (Sniper Support Rifle), designed as a designated marksman's rifle variant of the MK.17/SCAR-H. 

The SCAR-H TPR differs from its smaller sibling in its longer receiver with lengthened accessory rails and multi-adjustable sniper-style stock with 8 cheek riser positions, 10 length of pull positions and a 20mm Picatinny monopod rail. The Cybergun replica carries over all of these iconic TPR features, along with a full metal build, licenced FN Hertal trademarks and the Ares EFCS programmable gearbox with low resistance wiring and a Deans/T-Plug battery connector. 

If your DMR needs dictate a realistic base gun which stands out from all the AR platforms, the Cybergun FN Herstal SCAR-H MK.20 TPR AEG is one to watch. We like to think of this as the PSG-1 of the 21st century, marrying the slick SCAR looks with beastly DMR proportions!

If you're searching for your dream DMR base gun and that happens to be a SCAR, the Cybergun FN Herstal SCAR-H MK.20 TPR AEG is just what you need! This is the king of SCARs, known as the SCAR-H TPR (Tactical Precision Rifle) or MK.20 SSR (Sniper Support Rifle), designed as a designated marksman's rifle variant of the MK.17/SCAR-H. 

The SCAR-H TPR differs from its smaller sibling in its longer receiver with lengthened accessory rails and multi-adjustable sniper-style stock with 8 cheek riser positions, 10 length of pull positions and a 20mm Picatinny monopod rail. The Cybergun replica carries over all of these iconic TPR features, along with a full metal build, licenced FN Hertal trademarks and the Ares EFCS programmable gearbox with low resistance wiring and a Deans/T-Plug battery connector. 

If your DMR needs dictate a realistic base gun which stands out from all the AR platforms, the Cybergun FN Herstal SCAR-H MK.20 TPR AEG is one to watch. We like to think of this as the PSG-1 of the 21st century, marrying the slick SCAR looks with beastly DMR proportions!

If you have yourself one of the cutest backup pistols around, the Cyber Gun Colt Junior, you may want a spare mag to give you an even better chance in those last-ditch scenarios! The 7 rnd Colt Junior GBB Magazine from Cyber Gun is similarly laid out to a standard GBB magazine but miniaturised. The magazine can be loaded through the feed lips at the front, and the gas fill valve can be found on the magazine base plate. The left side of the magazine features a pull-down follower, making it easy to load BBs even without a speed loader.

A spare or replacement Gas Magazine for the Cyber Gun FN Five Seven (5-7), which holds a total of 17 rounds and is constructed to the exact same standard as the original magazine, using Alloy for the body and Polymer for the feed lips.

If you are looking for spare magazines for your officially licensed SIG AIR pistol? You have found it! This magazine is a replacement original magazine with a 20 round capacity. The magazine can be filled using a speed loader through the feed lips or the fill window at the bottom of the front face of the magazine when the magazine feed spring has been pulled down. The inlet valve can be found at the centre of the baseplate. The magazine has an enhanced baseplate, with an extension to ensure your pistol doesn't slip out of your hands. If you are a CQB player, you'll need at least a few of these!

If you're running an AEG equipped with a microswitch V2 gearbox and need a faster trigger, the Cybergun JeffTron Switch Brake MOSFET with Wiring is what you need! This Active Braking MOSFET is designed to replace the original microswitch trigger system and comes pre-wired with high-quality AWG16 and AWG24 wiring. As with any internal upgrade, we suggest consulting a tech before attempting installation if this is your first time!

This MOSFET is designed to prevent the piston from stopping in a random position when you take your finger off the trigger when shooting full auto and ensures only a single cycle is completed in semi-auto. Rate of fire and trigger response should also improve thanks to electrical efficiency advantages when compared to standard microswitches. This MOSFET is only designed for microswitch trigger-equipped V2 gearboxes and isn't likely to work with standard V2 or other gearbox types.

A spare or replacement magazine for the Cyber Gun PGM .338 Bolt action Snipers rifle. This magazine has an authentic steel shell, and a mix of polymer and alloy internal parts. The magazine holds 19 rounds and has a large gas reservoir, enabling it to be filled multiple times with BBs before the propellant runs out.

If you like to stand out on the skirmish field wielding something other than an M4 platform, the Cybergun FN Herstal SCAR-H AEG w/ EFCS MOSFET should suit you perfectly! This full-metal MK17 SCAR-H replica features licenced FN Herstal trademarks across the design, a dead-on match for the real SCAR-H. Externally, this SCAR-H is about as good as it gets, boasting a monolithic CNC aluminium upper receiver and fantastic quality polymer parts, a significant step up from most other SCAR replicas out there.

Inside, we are equipped with the ARES EFCS gearbox and MOSFET system, providing a lightning-fast trigger response in semi-auto along with programmable fire controls via the ARES EFCS Programming Box (available separately). The gearbox itself is rocking 18:1 ratio steel gears and a quick change spring system driven by a high torque slim motor housed in the ultra-realistic ARES slim motor grip.

The slim grip provides the most realistic handling experience an AEG can, matching the dimensions of real steel AR-15 grips and completely transforming the feel of the Cybergun SCAR-H into the realm of GBBR realism. If you're seeking a SCAR with flawless externals and well-equipped internals, the Cybergun FN Herstal SCAR-H AEG w/ EFCS MOSFET will do the trick!

If you like to stand out on the skirmish field wielding something other than an M4 platform, the Cybergun FN Herstal SCAR-H AEG w/ EFCS MOSFET should suit you perfectly! This full-metal MK17 SCAR-H replica features licenced FN Herstal trademarks across the design, a dead-on match for the real SCAR-H. Externally, this SCAR-H is about as good as it gets, boasting a monolithic CNC aluminium upper receiver and fantastic quality polymer parts, a significant step up from most other SCAR replicas out there.

Inside, we are equipped with the ARES EFCS gearbox and MOSFET system, providing a lightning-fast trigger response in semi-auto along with programmable fire controls via the ARES EFCS Programming Box (available separately). The gearbox itself is rocking 18:1 ratio steel gears and a quick change spring system driven by a high torque slim motor housed in the ultra-realistic ARES slim motor grip.

The slim grip provides the most realistic handling experience an AEG can, matching the dimensions of real steel AR-15 grips and completely transforming the feel of the Cybergun SCAR-H into the realm of GBBR realism. If you're seeking a SCAR with flawless externals and well-equipped internals, the Cybergun FN Herstal SCAR-H AEG w/ EFCS MOSFET will do the trick!