Airsoft Magazine Accessories

If you're planning on running your GBBR through winter or fancy mag dumping like it's going out of fashion without the dreaded "cooldown" effect, the Army Armament HPA P30 Adapter for M4/AR-15 AEG Magazines; CGS/MWS System is what you need! 

A collaborative project between Army Armament and T8 Systems, this HPA adapter is designed for the Tokyo Marui M4/AR-15 ZET System and the CYMA CGS M4/AR-15 GBBR series, allowing standard AEG mags to be used along with a High Pressure Air (HPA) power source. The set includes both an EU and US HPA connector but you will need an airline, HPA bottle and regulator to run this adapter. 

The advantages of using HPA when performance is concerned include the elimination of FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. If you're already running HPA you probably have all the bits to make this work already and experience shoulder-thumping recoil through the frosty months!

If you've dropped your SigAir 100rnd Mid-Cap Magazine and now the baseplate is damaged, then you're in luck! The VFC SigAir Polymer MPX AEG Replacement Magazine Baseplate fits only these magazines and comes with a steel screw so you can instantly replace your broken or marked baseplates. It is only compatible with these magazines and will not fit on other magazines.

The baseplate features SigAir trademarks on the bottom, we imagine nobody is really going to notice these, but when you reload your MPX John Wick style, your teammates and foes alike may catch a glimpse of the trademarks when you get your own cinematic slow-motion shot.

If you're into modern shooting techniques and running PTS EPM Gen.2 mid-caps, these should interest you! The PTS Syndicate MultiTasker® Mag Pod Base Plate for EPM Gen.2; 3 Pack are genuine real steel magazine enhancements designed for real P-Mag Gen.2 AR-15 magazines but also compatible with PTS EPM Gen.2 mid-cap magazines. 

The advantage of the MultiTasker® Mag Pod Base Plate is the ability to use your magazine as a makeshift bipod, providing improved stability so you can nail those long-range shots. Adding a bipod adds a lot of weight to the front end but the Mag Pod Base Plate should give you some of the functionality but none of the weight. If you're running a light and handy assault rifle seeking more stability without extra weight, the PTS Syndicate MultiTasker® Mag Pod Base Plate for EPM Gen.2; 3 Pack is what you need!

If you're planning to run your Tokyo Marui Hi-Capa GBB on HPA, the Lancer Tactical HPA Adapter for M4/AR-15 AEG Magazines; TM Hi-Capa GBB will improve your firepower considerably!

This HPA adapter is designed for the Tokyo Marui Hi-Capa GBB series and may fit Hi-Capa clones based on the TM design, though we can't make any guarantees. Allowing standard M4/AR-15 AEG mags to be used along with a High Pressure Air (HPA) power source, you can kiss goodbye to the "cooldown" effect and limited magazine capacity if you're rocking this on your 'Capa!

The set includes both an EU and US HPA connector but you will need an airline, HPA bottle and regulator to run this adapter. The advantages of using HPA when performance is concerned include the elimination of FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. If you're taking your playstyle in a speedy direction, this adapter will change your game!

If you're planning to run your Tokyo Marui Hi-Capa GBB on HPA, the Lancer Tactical HPA Adapter for M4/AR-15 AEG Magazines; TM Hi-Capa GBB will improve your firepower considerably!

This HPA adapter is designed for the Tokyo Marui Hi-Capa GBB series and may fit Hi-Capa clones based on the TM design, though we can't make any guarantees. Allowing standard M4/AR-15 AEG mags to be used along with a High Pressure Air (HPA) power source, you can kiss goodbye to the "cooldown" effect and limited magazine capacity if you're rocking this on your 'Capa!

The set includes both an EU and US HPA connector but you will need an airline, HPA bottle and regulator to run this adapter. The advantages of using HPA when performance is concerned include the elimination of FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. If you're taking your playstyle in a speedy direction, this adapter will change your game!

If you're planning to run your EU series, AAP-01 or Lancer Tactical CTHULHU on HPA, the Lancer Tactical HPA Adapter for M4/AR-15 AEG Magazines; EU Series & AAP-01 will do the trick! This HPA adapter is designed for EU series GBB pistols and should also fit the Action Army AAP-01 and Lancer Tactical's radical CTHULHU pistol. Designed to allow standard M4/AR-15 AEG mags to be used along with a High Pressure Air (HPA) power source, you can kiss goodbye to the "cooldown" effect and limited magazine capacity with this adapter on your gat!

The set includes both an EU and US HPA connector but you will need an airline, HPA bottle and regulator to run this adapter. The advantages of using HPA when performance is concerned include the elimination of FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. If you're taking your playstyle in a speedy direction, this adapter will change your game!

If you're planning to run your EU series, AAP-01 or Lancer Tactical CTHULHU on HPA, the Lancer Tactical HPA Adapter for M4/AR-15 AEG Magazines; EU Series & AAP-01 will do the trick! This HPA adapter is designed for EU series GBB pistols and should also fit the Action Army AAP-01 and Lancer Tactical's radical CTHULHU pistol. Designed to allow standard M4/AR-15 AEG mags to be used along with a High Pressure Air (HPA) power source, you can kiss goodbye to the "cooldown" effect and limited magazine capacity with this adapter on your gat!

The set includes both an EU and US HPA connector but you will need an airline, HPA bottle and regulator to run this adapter. The advantages of using HPA when performance is concerned include the elimination of FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. If you're taking your playstyle in a speedy direction, this adapter will change your game!

If you're planning to run your EU series, AAP-01 or Lancer Tactical CTHULHU on HPA, the Lancer Tactical HPA Adapter for M4/AR-15 AEG Magazines; EU Series & AAP-01 will do the trick! This HPA adapter is designed for EU series GBB pistols and should also fit the Action Army AAP-01 and Lancer Tactical's radical CTHULHU pistol. Designed to allow standard M4/AR-15 AEG mags to be used along with a High Pressure Air (HPA) power source, you can kiss goodbye to the "cooldown" effect and limited magazine capacity with this adapter on your gat!

The set includes both an EU and US HPA connector but you will need an airline, HPA bottle and regulator to run this adapter. The advantages of using HPA when performance is concerned include the elimination of FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. If you're taking your playstyle in a speedy direction, this adapter will change your game!

If you would like to make your reloads faster and less of a fumble, a magazine grip assist/pull can help make your magazines easier to pull from pouches and prevent accidental drops at a critical time. The Skull Magazine Grip Assist from MGP is designed to slip onto the bottom of your magazine and provide additional grip at the sides, and a rubber loop below the baseplate to give you a little extra to grab onto during a reload. These magazine grip assists come in packs of 3 and are available in either 5.56 style (for STANAG magazines) or 7.62 style (for 7.62 STANAG - SCAR-H, SR25, AR10 etc.). 

If you would like to make your reloads faster and less of a fumble, a magazine grip assist/pull can help make your magazines easier to pull from pouches and prevent accidental drops at a critical time. The Skull Magazine Grip Assist from MGP is designed to slip onto the bottom of your magazine and provide additional grip at the sides, and a rubber loop below the baseplate to give you a little extra to grab onto during a reload. These magazine grip assists come in packs of 3 and are available in either 5.56 style (for STANAG magazines) or 7.62 style (for 7.62 STANAG - SCAR-H, SR25, AR10 etc.). 

Want to make your VMP-1 SMG magazines look great and far easier to handle? The VMP-1 GBB SMG Magazine cover is just the thing! The magazine cover sleeves are supplied in a pack of 2 covers and is designed to slip over the lower section of the VMP-1 magazine and make them easier to handle in wet and cold weather. Making the magazine look more in keeping with the cutting-edge external design of the VMP-1 itself is just a bonus! Installation is as simple as slipping the cover over the bottom of the magazine with the baseplate removed, and then reinstalling the baseplate to secure it in place.

An authentic looking Stripper Clip for the DBoys KAR98K Bolt Action Rifle. It holds a total of five shells, makes for a faster reload of the internal magazine, and is the ideal way to carry spare shells in the field.

A BB holding bottle, designed to allow you to store up to 1200 BB's and then dispense them using a foldable nozzle. 

The M4/AR15 STANAG Multi-functional Magazine Grip attaches to the bottom of your STANAG style magazine and provides an additional gripping surface, making removing your magazine from tight pouches a breeze!

The M4/AR15 STANAG Multi-functional Magazine Grip attaches to the bottom of your STANAG style magazine and provides an additional gripping surface, making removing your magazine from tight pouches a breeze!

The M4/AR15 Polymer-MAG Multi-functional Magazine Grip attaches to the bottom of your Polymer-MAG style magazine and provides an additional gripping surface, making removing your magazine from tight pouches a breeze!

The M4/AR15 Polymer-MAG Multi-functional Magazine Grip attaches to the bottom of your Polymer-MAG style magazine and provides an additional gripping surface, making removing your magazine from tight pouches a breeze!

A semi transparent magazine coupler allowing you to connect your ASG CZ Scorpion Evo magazines together for faster reloading.

If you're looking for an easy way to get back online quickly after a reload, the MGC Polymer Magazine Coupler for M4/AR-15 Magazines is exactly that. Designed to link two M4/AR-15 magazines together to save you hassle with mag pouches and dump pouches, this magazine coupler fits most M4/AR-15 magazine styles but may not work with particularly chunky mags. 

The set includes a set of rubber spacers to ensure your mags fit tightly and the coupler itself, constructed from high density polymer with a steel central screw. Couplers are a fantastic option for CQB, minimising offline time so you can keep up suppressive fire without worrying about reloading from your rig under pressure. If you want to take the enemy by surprise when they think you're busy faffing with empty mags, the MGC Polymer Magazine Coupler for M4/AR-15 Magazines is what you need!

If you are considering getting a 9mm style AR but you aren't sure if you'll like it, take a look at the M4/AR15 Pistol Magazine Adapter from SRC. The adapter allows most M4/AR15 AEGs to use the pistol style magazines for the SR4 ST Falcon AEG, changing the look of your setup completely! This change is not permanent, however, as the adapter simply locks into the AR15 magazine release, and can be attached or removed as quickly as changing mags!

If you plan to run your Hi-Capa GBB pistol with high pressure air, the Novritsch HPA SMG-5 Magazine Adapter for Hi-Capa GBB Pistols is essential. This magazine adapter allows your Hi-Capa GBB to feed from curved MP5/SMG-5 AEG mid-cap magazines and HPA from an external tank (not included), increasing capacity considerably and practically eliminating FPS fluctuation due to the "cooldown" effect. 

The adapter is pre-assembled, meaning you don't need to mess around putting it together or run the risk of doing it wrong and causing injury. Naturally, you'll need an HPA bottle, air line and regulator to use this adapter and the fitting is US Spec, meaning only US Spec air lines will fit. If you want to eliminate cooldown, improve rapid-fire performance and increase your mag capacity, the Novritsch HPA SMG-5 Magazine Adapter for Hi-Capa GBB Pistols is what you need!

If you struggle to get your SRS magazines out of your mag pouches quickly, this should help! The Hades Airsoft Magazine Base for SRS Sniper Rifles mounts to the bottom of your Silverback SRS Sniper Rifle magazine and provides extra purchase for easier handling. Faster reloads mean more chances to bag that kill! 

If you're seeking a way to style up your PTS EPM-AR9 magazines, these will do the trick! The PTS Syndicate EPM-AR9 Magazine Baseplate; 3 Pack are constructed from the same rock-solid Dupont Zytel Polymer as the originals but finished in red, adding a touch of contrast to your setup to make it really pop.

Like the original black baseplates, the red versions have a dot matrix on each, ideally suited to marking your magazines, either numerically or to identify which mag is yours. The set also includes 3 mounting screws which is great news for those who've lost one. If you're an aggressive skirmisher who values style over concealment, the PTS Syndicate EPM-AR9 Magazine Baseplate; 3 Pack in spicy red will suit your needs perfectly!

A magazine adaptor designed to make the ARES VZ.58 Carbine and Comapct compatible with STANAG / M4 AEG 6mm BB Airsoft Magazines. 

Want to make your VMP-1 SMG magazines look great and far easier to handle? The VMP-1 GBB SMG Magazine cover is just the thing! The magazine cover sleeves are supplied in a pack of 2 covers and is designed to slip over the lower section of the VMP-1 magazine and make them easier to handle in wet and cold weather. Making the magazine look more in keeping with the cutting-edge external design of the VMP-1 itself is just a bonus! Installation is as simple as slipping the cover over the bottom of the magazine with the baseplate removed, and then reinstalling the baseplate to secure it in place.

Instantly fill your revolver with a new set of BB carry shells! Suitable for both 4" and 8" Dan Wesson revolvers. This method is much quicker than replacing each shell individually, and makes reloading your Airsoft revolver a dream.

The M4/AR15 STANAG Multi-functional Magazine Grip attaches to the bottom of your STANAG style magazine and provides an additional gripping surface, making removing your magazine from tight pouches a breeze!

A rubber magazine assist also known as a mag pull. Produced to allow a faster and more "tactical" removal of the magazines from your magazine pouches and the RIF itself.

The M4/AR15 Polymer-MAG Multi-functional Magazine Grip attaches to the bottom of your Polymer-MAG style magazine and provides an additional gripping surface, making removing your magazine from tight pouches a breeze!

If you want to run your SSP18 or EU-series GBB on HPA, the Novritsch HPA SMG-5 Magazine Adapter for EU Series GBB Pistols; Gen 2 is the easiest way to do it. This adapter is pre-built using a zinc alloy magazine body and fibre-reinforced nylon polymer adapter and is outfitted for US Spec HPA lines by default. This adapter is designed to feed from curved MP5/SMG-5 AEG mid-cap magazines and HPA from an external tank (not included), increasing capacity considerably and practically eliminating FPS fluctuation due to the "cooldown" effect. 

The adapter is pre-assembled, meaning you don't need to mess around putting it together or run the risk of doing it wrong and causing injury. Naturally, you'll need an HPA bottle, air line and regulator to use this adapter and the fitting is US Spec, meaning only US Spec air lines will fit. If you're running your SSP18 in the Novritsch Minimalist Carbine Kit or as a primary, the Novritsch HPA SMG-5 Magazine Adapter for EU Series GBB Pistols; Gen 2 will give you the rapid-fire performance and capacity you need to stay ahead!