Airsoft Magazines

If you need a spare mag for your Double Bell Lee Enfield, here you go! The Double Bell 6 Shell Magazine for SMLE No.1 MK.III Lee Enfield Rifles holds 6 Double Bell Lee Enfield/KAR98K shells (not included) and is compatible specifically with the Double Bell Lee Enfield No.1 MK.III S.M.L.E Bolt Action Sniper Rifle; Shell Ejecting. 

The magazine is constructed from alloy with a gun metal finish which closely matches the real thing. While it may not be the most practical skirmish primary, the fun factor of the shell-ejecting Lee Enfield is off the charts. If you want to keep your Double Bell Rifle No.1 MK.III SMLE well fed, this magazine is what you need!

Looking for modern M4/AR15 AEG magazines? You've found what you need in the Battleaxe 150rnd Polymer Magazine! This mag is designed for M4/AR15 AEG platforms. The magazine is constructed from high-density polymer and holds a respectable 150 BBs which are loaded through the fill/feed port on the top of the magazine body. This is a spring-loaded mid-cap, meaning there is no "battle rattle" as you run which will give your position away.

This magazine also boasts a crackle texture on the sides to allow for a firm grip on the magazine during reloads in inclement weather and also allows you to use the mag as a makeshift vertical grip when shooting in cramped CQB environments. At the top of the magazine body, the clear internals are visible through the magazine catch hole on the left side which allows you to confirm whether or not the magazine is fully loaded. Handy for those who run magazines on magazines on magazines, it's easy to get confused!

If you're planning on running your GBBR through winter or fancy mag dumping like it's going out of fashion without the dreaded "cooldown" effect, the Army Armament HPA P30 Adapter for M4/AR-15 AEG Magazines; CGS/MWS System is what you need! 

A collaborative project between Army Armament and T8 Systems, this HPA adapter is designed for the Tokyo Marui M4/AR-15 ZET System and the CYMA CGS M4/AR-15 GBBR series, allowing standard AEG mags to be used along with a High Pressure Air (HPA) power source. The set includes both an EU and US HPA connector but you will need an airline, HPA bottle and regulator to run this adapter. 

The advantages of using HPA when performance is concerned include the elimination of FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. If you're already running HPA you probably have all the bits to make this work already and experience shoulder-thumping recoil through the frosty months!

The Jing Gong 100rnd P90 Mid-Cap Magazine is transparent, allowing you to constantly monitor your remaining BBs so you don't get ambushed whilst having an empty magazine! This magazine fits perfectly into the CM.060, giving you smooth reloads even in the heat of the battle when the adrenaline is pumping!

It is made from a strong polymer and sturdy steel feed spring making it a mighty fine magazine that will last you a long time. This magazine can hold approximately 100 BBs so you have plenty of shots available if you opt for semi-auto firing, but if you prefer full spraying, this large magazine will surely have enough BBs in it so you can hit your target, or at least we would hope so...

If you want to take your S&T Nambu Type 100/40 Submachine Gun AEG out on the skirmish field, you're going to need some spare magazines! This magazine has a durable steel shell and reliable feeding spring, ensuring that this magazine with survive anything a skirmish has to throw at you. Its 110rnd capacity is plenty enough for any skirmisher who plays close-quarters whilst out on the battlefield.

The mid-cap design means that you don't need to wind this magazine at all and it will feed until it's empty, this allows for faster reloads and complete uninterrupted play until the magazine is empty. The curved design allows for a better grip on the magazine whilst reloading and whilst holding the magazine during firing.

Keep your Nambu Type 100/40 Submachine Gun AEG well fed whilst out on the battlefield with an extra 110rnd for every magazine, exactly what you need to skirmish your WW2 loadout effectively!

If you're running an S&T Lee Enfield and need more mags, these will do the trick! The 32rnd Magazine for S&T Lee Enfield Rifle No.4 MK.I is patterned after the real steel No.4 MK.I detachable magazine which differs slightly from the earlier No.1 MK.III mags in the geometry of its reinforcement ribs. This makes this mag perfect for the stitch counters who need the perfect look for their No.4 MK.I but for those less picky Lee Enfield wielders, this also fits the S&T Rifle No.1 MK.III.

As with the No.1 MK.III magazine, this mag is loaded through the fill/feed port at the front of the magazine body using a speed loader or loading tool. The mag is finished in a realistic gun metal grey with an antique look, steering well clear of any hints that this mag isn't the real deal. If you're an observant skirmisher or collector seeking the correct magazine for your S&T Lee Enfield Rifle No.4 MK.I, the 32rnd Magazine for S&T Lee Enfield Rifle No.4 MK.I is exactly that!

If you need a job lot of magazines for your ST870 and fancy a discount, this is your opportunity! This awesome set of S&T 22rd Magazines is perfect if you need a complete loadout for a long game day of indoor skirmishing. The magazines themselves are constructed from polymer and are the exact same as the magazines that come with the S&T ST870 Pump Action Single Shot Shotgun, meaning they will fit all the S&T ST870 replicas.

Each magazine holds 22 BBs and can be loaded through the fill/feed port on the top of the magazine body using a speed loader. Being low-cap mags, you won't give yourself away with "battle rattle" if you like to move quickly, and the lightweight polymer construction of these mags means your reloads won't be slowed down by big weighty magazines! 

If you are looking for magazines for your Double Eagle or Tokyo Marui MWS GBBR; you have found them! These magazines are designed for the Double Eagle Noveske N4 MWS GBBR, but should work with original Tokyo Marui M4 MWS System GBBRs too - unlike other Double Eagle gas magazines.

The mag is constructed with a durable alloy shell and internals. It is loaded through the feed lips at the top of the mag body with a speed loader, preferably one with a GBB adapter. The gas fill valve is at the bottom of the magazine, on the baseplate, and the mag is compatible with both green gas and red gas.

It holds 35 BBs, making it perfect for those who seek realism. As with the original TM and Double Eagle GBBR magazines, these mags include the bolt stop components which lock the bolt open at the end of a mag, further adding to the realism of the Double Eagle Noveske N4 MWS ZET System GBBR!

If you want a magazine for every season and you're running a CGS or TM ZET system GBBR, get one of these! The CYMA 30rnd Green Gas/HPA Gas Magazine for CGS/MWS GBBRs is compatible with both CYMA CGS and Tokyo Marui ZET system M4/AR-15 GBBRs and has a green gas fill valve and a HPA line attachment point on the rear of the STANAG style body.

The mag can be loaded through the feed lips at the top of the magazine, though this can be challenging with a standard speed loader without a GBBR adapter. As with the original TM and CYMA GBBR magazines, these mags include the bolt stop components which lock the bolt open at the end of a mag, and each mag holds 30 BBs. 

To use this magazine with HPA lines, instead of swapping the whole magazine when out of ammo, you can purchase separate quick-detach BB tubes. By pulling the tab rearwards on the bottom of the magazine you can remove the internal BB tube and then insert another one. This means that you can carry way more BBs without the hassle of large magazines occupying your rigs!

Whether you feel like using gas or HPA, this magazine has you covered for all occasions and is the perfect all-year-round gas magazine, just make sure to get some separate BB tubes if you plan on using HPA!

The world's best Airsoft Magazine just got better! Made to a seriously tough standard using excellent materials, the EPM-1 Magazine holds a massive 250rnds in a Spring-Fed Mid-Cap design. This means that you still get the incredible feeding performance of a PTS Mid-Cap, but with a capacity that can rival most High-Cap Magazines!

If you need to load up on M4/AR-15 mid-caps, the Specna Arms 125rnd S-Mag Mid-Cap Magazine for M4/AR-15 AEG; Set Of 5 is ideal! This great value magazine multipack includes 5 S-Mag Mid-caps holding 125 BBs each, loaded through the fill/feed port at the top of the mag body using a speed loader, as with other mid-caps.

The S-Mag boasts a uniquely modern design, patterned after popular real steel polymer magazines with SA texture on each side to improve grip and wet weather handling. These magazines are known for their robust nature, wide compatibility and low weight and should fit and feed in almost any M4/AR-15 AEG out there, along with other compatible platforms such as 416 AEGs, SCAR-L AEGs and L85 AEGs. If you want to load up on mid-caps in one go, this is one of the best (and most affordable) ways to do it!

If you need to load up on M4/AR-15 mid-caps, the Specna Arms 125rnd S-Mag Mid-Cap Magazine for M4/AR-15 AEG; Set Of 5 is ideal! This great value magazine multipack includes 5 S-Mag Mid-caps holding 125 BBs each, loaded through the fill/feed port at the top of the mag body using a speed loader, as with other mid-caps.

The S-Mag boasts a uniquely modern design, patterned after popular real steel polymer magazines with SA texture on each side to improve grip and wet weather handling. These magazines are known for their robust nature, wide compatibility and low weight and should fit and feed in almost any M4/AR-15 AEG out there, along with other compatible platforms such as 416 AEGs, SCAR-L AEGs and L85 AEGs. If you want to load up on mid-caps in one go, this is one of the best (and most affordable) ways to do it!

A STANAG type magazine which is designed to fit any Airsoft AEG rifle which accepts this style of magazine, such as M4, L85, 416, SCAR-L and more.

This magazine is the perfect purchase for any Airsoft skirmisher due to its low price and high quality, with the added bonus that should you one day visit a low-cap only site it can be quickly changed to suit your needs.

A spare or replacement magazine for the Army Armament JW3/JW4 Combat Master. Perfect for those die hard JW fans, who wants to live out their JW fantasy on the field.

A  spare or replacement 25 round Airsoft magazine designed for use in both the RAVEN EU Series and  WE Europe's G-Series of gas blowback Airsoft pistols. 

Perfect for any Airsofter wielding an Airsoft pump action shotgun; this pack of Airsoft shotgun shells contains 3 red and 3 black shells, each capable of holding 30 rounds of 6mm Airsoft BB ammunition.

Whether you use a Specna Arms M4/AR-15 AEG or need affordable M4 mid-caps to expand your firepower, the 125rnd S-Mag Mid-cap is what you need. This magazine is constructed from high-density polymer with a steel feed spring and is loaded through the fill/feed port at the top of the magazine body, just like other mid-caps.

The S-Mag is compatible with the vast majority of M4/AR-15 AEGs and should also fit most 416, SCAR-L and L85 AEG replicas. Being a mid-cap, this magazine won't give you away with the dreaded battle rattle as you run and is ideal for sneaky skirmishers looking for more capacity!

Whether you use a Specna Arms M4/AR-15 AEG or need affordable M4 mid-caps to expand your firepower, the 125rnd S-Mag Mid-cap is what you need. This magazine is constructed from high-density polymer with a steel feed spring and is loaded through the fill/feed port at the top of the magazine body, just like other mid-caps.

The S-Mag is compatible with the vast majority of M4/AR-15 AEGs and should also fit most 416, SCAR-L and L85 AEG replicas. Being a mid-cap, this magazine won't give you away with the dreaded battle rattle as you run and is ideal for sneaky skirmishers looking for more capacity!

Whether you use a Specna Arms M4/AR-15 AEG or need affordable M4 mid-caps to expand your firepower, the 125rnd S-Mag Mid-cap is what you need. This magazine is constructed from high-density polymer with a steel feed spring and is loaded through the fill/feed port at the top of the magazine body, just like other mid-caps.

The S-Mag is compatible with the vast majority of M4/AR-15 AEGs and should also fit most 416, SCAR-L and L85 AEG replicas. Being a mid-cap, this magazine won't give you away with the dreaded battle rattle as you run and is ideal for sneaky skirmishers looking for more capacity!

If you need affordable Mid-cap magazines for your M4/AR-15 AEG you're going to want to check this out! The Delta Armory 120rnd DMAG Mid-cap Magazine is designed to fit M4/AR-15 AEGs and is styled after a well-known polymer real steel magazine, complete with waffle-style gripping texture.

The magazine is loaded just like any other Airsoft mid-cap, through the fill/feed port at the top of the magazine body using a speed loader or loading tool. The magazine is also marked on either side with the capacity (120) and the Delta Armory logo. If you need cheap M4 mags to complete your loadout, this is as cheap as they come!

If you need affordable Mid-cap magazines for your M4/AR-15 AEG you're going to want to check this out! The Delta Armory 120rnd DMAG Mid-cap Magazine is designed to fit M4/AR-15 AEGs and is styled after a well-known polymer real steel magazine, complete with waffle-style gripping texture.

The magazine is loaded just like any other Airsoft mid-cap, through the fill/feed port at the top of the magazine body using a speed loader or loading tool. The magazine is also marked on either side with the capacity (120) and the Delta Armory logo. If you need cheap M4 mags to complete your loadout, this is as cheap as they come!

Another excellent quality product from PTS, a 170rd Mid Cap magazine for those of you looking for a more low profile but reliable magazine option.

Another excellent quality product from PTS, a 170rd Mid Cap magazine for those of you looking for a more low profile but reliable magazine option.

A 130rnd Mid-Cap Magazine for SMG-5 Platform Airsoft Guns, fitting CYMA, Classic Army, SRC, JG and Tokyo Marui standard replicas. This modern-style Magazine is reminiscent of the 'P-Mag' style design, and features Mock Bullets / Dummy Ammunition visible through a window on the side of the Magazine. Whether you run a modern SMG-5 loadout, or you want to add a tactical 'touch' to your Airsoft Gun, then the CYMA 130rnd Polymer SMG5/SMG5K Magazine is perfect for the task.

If you have treated yourself to the phenomenal new SMG from Double Eagle, the UTR45, you will want to stock up on these! This 120rnd AEG magazine is compatible with the UTR45 and is loaded using a standard speed loader or loading rod through the feed/fill port at the top of the magazine. 

This is a spare or replacement Gas Magazine for the Action Army AAP-01 Assassin Pistol, that holds a total of 23rnds and is based on the EU Series design. It is filled with BBs and Gas just like any other Pistol Magazine, using a Speedloader to feed BBs in through the feed lips, or holding down the follower to fill the BBs from the bottom of the Magazine. The Inlet Valve on the base of the Magazine is where you should insert your Green Gas bottle to fill it.

If you own an AAP-01 Assassin and want to spend more time dumping magazines on Full Auto, and less time fumbling around with a Speedloader, then you will need a backlog of Spare Magazines.

If you need more mags to keep your Specna Arms SA-X or SA-FX series SMG doing what it does best, this should suit you! The Specna Arms 200rnd S-MAG High Cap Magazine for SA-X & SA-FX AEG is a wheel wound high capacity magazine which holds 200 BBs. The magazine can be loaded through the fill window on the top of the magazine body by opening the fill window door and pouring your BBs straight in. The winding wheel is located on the baseplate and needs to be wound up to keep the magazine feeding.

The external design of this magazine matches other Specna Arms S-MAG style magazines, with SA logo textured panels on either side to add grip and enhance the aesthetic and an extended baseplate to make the mag easier to pull from pouches when a fast reload is required. Being based on the G&G ARP9 magazine design, this mag may also work in other AEG platforms designed for ARP9 magazines but is ideal for Specna Arms SA-X and SA-FX series AR-9 SMGs.

If you need more mags to keep your Specna Arms SA-X or SA-FX series SMG doing what it does best, this should suit you! The Specna Arms 200rnd S-MAG High Cap Magazine for SA-X & SA-FX AEG is a wheel wound high capacity magazine which holds 200 BBs. The magazine can be loaded through the fill window on the top of the magazine body by opening the fill window door and pouring your BBs straight in. The winding wheel is located on the baseplate and needs to be wound up to keep the magazine feeding.

The external design of this magazine matches other Specna Arms S-MAG style magazines, with SA logo textured panels on either side to add grip and enhance the aesthetic and an extended baseplate to make the mag easier to pull from pouches when a fast reload is required. Being based on the G&G ARP9 magazine design, this mag may also work in other AEG platforms designed for ARP9 magazines but is ideal for Specna Arms SA-X and SA-FX series AR-9 SMGs.

Looking for spare magazines for the VORSK VMP-1? You have found them! These magazines are constructed from alloy with a steel feed spring and brass valves and hold 45 BBs which can be loaded either by hand through the feed lips at the top or using a speed loader. Please note, these magazines do not include the polymer magazine sleeve supplied with the original magazine included with the VMP-1 SMG. 

If you run an AK and you want capacity but without the dreaded battle rattle, CYMA has a treat for you! The 200rnd Polymer Mid-cap Magazine For AK AEG packs a whopping 200-round capacity into a standard length spring loaded mid-cap, meaning no issues getting nice and low in the prone position and of course, no tactical maracas as you chase the enemy down!

These mags are styled after modern polymer magazines for 7.62x39mm style AK rifles and have reinforcement ribs across the design and dual witness windows on each side showcasing mock cartridges for added realism. The magazine is also marked with recessed numbers indicating the capacity of the real magazine, and at the baseplate, we are treated to realistic 7.62x39mm calibre markings. The polymer used in the construction of these mags is very strong and has a textured feel, a hallmark of robust high density polymers with fibre reinforcement. If you need AK mags with a modern look, no battle rattle and an impressive capacity, these are the ones to get!