ASG Airsoft

A multipack of magazine for the ASG Scorpion Evo. These new magazines from ASG allow you to insert your own decals to make your magazines look more realistic. 

An ideal battery for those who have very limited space or for those who have a front wired PEQ box style setup or RC cars. With a 1000mAh 30C discharge expect a good rate of fire but 2 or 3 are recommended for a full day of constant shooting.

A Green Gas powered Spare Magazine for the ASG STI Combat Master Pistol. If you own one of these Sidearms, chances are you're a fan of the film. If you're a fan of the film, chances are you're going to want to fling Magazines all over the place. Stock up on Spare Mags today to give you the best chance of avenging your pupper, and so you can spend more time playing, and less time back in the safe zone reloading.

A Scope Mount designed for Airsoft Sights and Scopes which offsets Sights and Scopes allowing their Eye relief to be adjusted even with minimal rail space. 

An incredibly unique and simple Airsoft pistol, this almost silent non-blowback handgun is the ultimate sneaky Airsoft sidearm. Based on the MK2 Ruger and featuring an alloy exterior, this is excellent for garden shooting and as a long range DMR pistol.

If you like the CQR look and have a sneaky playstyle this bundle should suit you well! The ASG HERA ARMS Covert OPS Pack comprises the impressive ASG HERA ARMS CQR AR-15 Milspec SSS Edition Rifle, the ASG B&T Rotex-V Mock Suppressor, a Delta Armory Red Dot and two 140rnd NUPROL Mid-Cap Magazines. All you need to get shooting with the CQR is your choice of battery, charger and eye protection!

A 20mm RIS lower mounted point designed to stop the operator of the weapons' hand from sliding forward in front of the barrel. 

The ASG Dot Sight is a red/green dot sight designed to allow you to engage the enemy more quickly and effectively than with standard iron sights. This works by projecting a red or green dot on the internal lens of the sight, meaning all you have to do to make the hit is line the dot up with the target and pull the trigger! 

If you find the red dot is off when you take your first shot, no need to worry, the sight can be zeroed using the dials on the top and sides for perfect precision. Compatible with any 20mm Picatinny rail thanks to its included one-piece mount, the ASG Dot Sight is a cost-effective piece of kit with unique styling!

A vital spare for Version 3 gearboxes.

A replacement / spare for stock or damaged bearing in Version 6 (V6) and Version 7 (V7) Gearbox. In gearbox spring guides are designed to help the spring in its correct position. 

A None Blowback Airsoft 6mm BB Pistol, designed to look and function like the Dan Wesson Revolver Series. 

A pack of 10 Rubber Stop Caps for ASG 40mm Airsoft Grenades, which simply fit into the top of the Shell once they are filled with BBs. 

The ASG Urban sniper spring sniper rifle magazines made from Polymer and holds up to 30 6mm Airsoft BBs at a time. Easy to adjust with a side press button release catch and compact for easy storage during mid game use. 

The perfect option for snipers who want to spend more time concealed in their hide and less time frantically scrambling around for a speed loader to reload their magazines - giving away your position. 

If you're a true Sniper, then each one of these magazines has a potential for 20 kills.

A High Capacity Magazine designed and built for the ASG CZ 805 Bren A1 Series of Airsoft 6mm AEG Rifles. The magazine is constructed from Polymer, with a Polymer Shell and Internals. 

If your CZ 805 is looking a bit battered, now may be the time to fix 'er up! The ASG Replacement Receiver Stock Hinge is a replacement original part for the ASG CZ 805 BREN AEG and is the part you need if your stock no longer locks into the deployed position. This is the receiver side of the stock mechanism and is constructed from high density polymer.

A magazine for the VFC McMillian M40A3 6mm BB Spring Action Sniper Rifle and holds up to 20 BBs at a time.

A special mounting ring with three 20mm short rails on top and sides. Allowing additional accessories like lasers or lights to be attached.

A soft imitation leather holster purpose built for all sizes of Dan Wesson Airsoft revolvers.

A replacement or spare CO2 magazine for the ASG - Strike Systems Commander series of pistols. Each magazine is of a full metal construction and holds up to 24 rounds.

A mock Airsoft suppressor designed specifically for the MP9 GBB submachine gun, featuring genuine Brugger & Thomet AG licensed trademarks.

The perfect pouch for speedy revolver shenanigans! The Dan Wesson Revolver Speed loader pouch from ASG can hold a single 6 shot revolver speed loader and is an open-topped design for fast access. The pouch is constructed from rigid woven fabric and provides decent retention, meaning your speed loader will not fly out during a sprint! This pouch has a velcro loop at the rear for attachment, is compatible with standard belts (maximum 2-inch width), and can also be attached to MOLLE webbing loops. If you are building your Revolver Ocelot loadout, or you just fancy trying some speedy revolver trick shooting, this pouch will serve you well!

For those of you who have a heavy trigger finger, LMG users, or the thrifty bargain hunter, we finally have a "cheap" BB which we can approve of! The ASG Cursed BBs are a high quality polished BB with absolutely no surface imperfections, seam lines, or injection pin marks, and despite this level of quality you can spray and pray all day long at this bargain price!

For those of you who have a heavy trigger finger, LMG users, or the thrifty bargain hunter, we finally have a "cheap" BB which we can approve of! The ASG Cursed BBs are a high quality polished BB with absolutely no surface imperfections, seam lines, or injection pin marks, and despite this level of quality you can spray and pray all day long at this bargain price!

If you are shooting so much you are emptying your bank account as fast as you empty your magazine, more affordable BBs are the key to keeping up the habit. Often, with affordability comes compromise, but not with ASG's Q Blaster BBs! These 6mm Airsoft BBs are supplied in a resealable bottle containing 3300 BBs approximately and are polished and coated for smooth reliable feeding. These are the 0.25G variety, perfect for the average AEG, shotgun or GBB pistol. 

Tolerance is slightly wider than Blaster Devils but still minuscule, promising +/- 0.03mm variance at the absolute maximum. These BBs would be great for CQB use and use in platforms which won't need the extra precision of Blaster Devils to show the enemy who is boss! 

The go-to weight of every Airsoft site and skirmisher. 0.20g BB are commonly used as a beginner weight of BB, great in all Airsoft replicas offering the highest velocity with the same high quality finish as the rest of the ASG blaster Range.

If you are shooting so much you are emptying your bank account as fast as you empty your magazine, more affordable BBs are the key to keeping up the habit. Often, with affordability comes compromise, but not with ASG's Q Blaster BBs! These 6mm Airsoft BBs are supplied in a resealable bottle containing 3300 BBs approximately and are polished and coated for smooth reliable feeding. These are the 0.28G variety, perfect for outdoor skirmishes where you may need improved foliage penetration, wind resistance and consistency at long range.

Tolerance is slightly wider than Blaster Devils but still minuscule, promising +/- 0.03mm variance at the absolute maximum. These BBs would be great for a thrifty Airsofter with a long range leaning, and absolutely ideal for an LMG which may need to put down some serious volume of fire at longer ranges than average.

This Airsoft tracer unit is designed to fit onto threaded outer barrels of Airsoft guns to allow the use of illuminated Airsoft Tracer BBs. 

The ASG B&T tracer unit comes with a 14mm CCW thread that will attach to 90% of AEGs, and will attach to the remaining 10% with a thread adapter. The unit has an easy to operate on / off button switch and textured outer shell for easier fitment onto your Airsoft RIF.

Fully licensed by McMillan, this bolt action 6mm BB Airsoft sniper rifle is a 1:1 scale replica of the US Marine Corps’ M40A3 sniper rifle, complete with accurate McMillan branding.

A pack of Shotgun Shells designed for Airsoft 6mm Pump Action Shotguns which accept Standard Shotgun Shells. The shells are easily loaded from the top, by using an Airsoft Speed Loader, by simply pushing the nozzle into the Shell's top hole and filling. These shells are a must have purchase for any Airsoft Skirmisher who has a pump action Shotgun, as it allows you to play for longer without having to stop to reload magazines.

A bottle of 3300 high quality, competition grade polished 0.20g BBs from ASG, which undergo a strict quality control process and are carefully selected to achieve a higher standard of BB over the traditional Blaster series, which are already spot on. The 0.20g BBs are the baseline weight for Airsoft Guns are are appropriate for indoor sites, testing and high speed guns / grenade launchers.