All Two-Tone Airsoft Guns

Army Armament have taken Airsoft 1911's to the next level, with a sweet array of advanced features. 

The extended magazine and light enhancing ironsights as well as the textured grip and beavertail safety come together for a true operator's sidearm. With satisfying trigger response and recoil this 1911 is a modern twist on an iconic pistol.

If you're looking for a full metal AEG with great DMR potential, the Delta Armory DA-A15-EGL ALPHA™ 13" M-LOK M4/AR-15 AEG is one to watch. As with the other Delta Armory ALPHA™ line AEGs from Delta, the DA-A15-EGL boasts full metal construction with the unique Delta Armory receiver and flawless machining throughout. 

Unlike the standard DA-A15, this version is rocking the EAGLE™ programmable MOSFET, offering a wide range of programmable fire modes including semi-auto only and sniper delay. Being a relatively long platform, the inclusion of the EAGLE™ makes the DA-A15-EGL a relatively easy DMR conversion, thanks in part to its quick change spring system. The EAGLE™ MOSFET's other tricks include burst modes of various durations, binary trigger, AUG mode, pre-cocking, trigger sensitivity and active braking, giving you loads of advanced features for a remarkably affordable price. 

If you like to skirmish in the great outdoors with a primary at the cutting edge of external design, bristling with accessory attachment points with full compatibility with aftermarket upgrades and an impressively advanced starting point, you'll love the Delta Armory DA-A15-EGL ALPHA™ 13" M-LOK M4/AR-15 AEG!

CQB Experts and ARP9 fans, you're going to want to check this out! The ARP556 3.0 is here, bringing the same energetic performance as the ARP9 3.0 but with a 5.56 style receiver for compatibility with standard M4/AR-15 magazines. If you held out on the ARP9 3.0 because you don't want to buy more mags, get this one, it's just as epic!

Inside the ARP556 3.0, you will find a generous selection of pre-upgraded parts, including G&G's new MOSFET integrated gearbox, known as the "MIG". The MIG features G&G's new MOSFET system which is smaller and more efficient than ever before, and a QD spring guide to allow for easy power tuning without needing to take the gearbox apart. Other innovations include a new side folding stock system, known as the CHFS, and a new double-feed magazine. The other awesome G&G pre-upgraded internals remain, including the epic 25,000 RPM high speed motor which is ready to provide the thunderous rate of fire the ARP9 and ARP556 are known for.

If you're searching for the ideal CQB primary, this is practically it. With a bite-sized external form but king-size performance, the ARP556 3.0 is a piece to contend with up close and will be an asset to any aggressive outdoors skirmisher who values an intense rate of fire and lightweight yet rock-solid build!

If you're in the market for a MK18 and you want the latest version, the EMG Daniel Defense DD4™ MK18 RIII 10.3" AEG is exactly what you need! This full metal M4/AR-15 AEG boasts official licencing from Daniel Defense and is a perfect match for the latest MK18 style rifle in the DD4™ series, including flawless replicas of the MK18 RIS III handguard, the "Grip-N-Rip" charging handle, "Tornado" pistol grip and DD Buttstock. This thing is all Daniel and we love it!

This beast is manufactured by CYMA Platinum for EMG, meaning we are treated to some of the best out-of-the-box internals around. Inside, you will find a high speed Neodymium magnet motor driving a 13:1 CNC steel high speed gearset running on 8mm ball bearing bushings, kept in check by the CYMA Platinum MOSFET. The cylinder and piston heads are both the silent types, CNC machined from aluminium for maximum strength and flawless air seal. The inner barrel is also a 6.03mm tightbore, giving you an accuracy edge and the ability to challenge long rifles in the great outdoors.

Whether you're a Daniel Defense fan or looking for a modern, M-LOK-equipped platform with gorgeous ergonomic furniture and build quality to rival the best, the DD4 MK18 RIII from EMG is perfectly suited to your needs!

If you're in the market for a MK18 and you want the latest version, the EMG Daniel Defense DD4™ MK18 RIII 10.3" AEG is exactly what you need! This full metal M4/AR-15 AEG boasts official licencing from Daniel Defense and is a perfect match for the latest MK18 style rifle in the DD4™ series, including flawless replicas of the MK18 RIS III handguard, the "Grip-N-Rip" charging handle, "Tornado" pistol grip and DD Buttstock. This thing is all Daniel and we love it!

This beast is manufactured by CYMA Platinum for EMG, meaning we are treated to some of the best out-of-the-box internals around. Inside, you will find a high speed Neodymium magnet motor driving a 13:1 CNC steel high speed gearset running on 8mm ball bearing bushings, kept in check by the CYMA Platinum MOSFET. The cylinder and piston heads are both the silent types, CNC machined from aluminium for maximum strength and flawless air seal. The inner barrel is also a 6.03mm tightbore, giving you an accuracy edge and the ability to challenge long rifles in the great outdoors.

Whether you're a Daniel Defense fan or looking for a modern, M-LOK-equipped platform with gorgeous ergonomic furniture and build quality to rival the best, the DD4 MK18 RIII from EMG is perfectly suited to your needs!

If you have been looking for a ready-to-play Airsoft DMR that breaks the mould when it comes to looks, the Novritsch SSR63 A3 is the way to go! This AEG is locked to semi-automatic fire only from the factory and considerably pre-upgraded internally, making it ready for DMR duty right away. Internal upgrades include a MOSFET with active braking and full cycle control, a 6.03mm tightbore inner barrel, CNC HOP-up unit with a Maple Leaf flat HOP-up setup.

Based on the real steel SL9 platform, the DMR variant of the AR36, the SSR63 A3 is kitted out with an adjustable thumbhole stock with an adjustable cheek riser and an extended CNC aluminium 20mm Picatinny top rail, ready for whatever optic you wish to mount, no matter how big! Whether you are an AR36 fan with a pile of magazines ready to go or you want to take a walk on the wild side with your DMR platform, the SSR63 A3 will be an asset to your kit list!

Manufactured by KRYTAC this is an Airsoft replica of the world famous KRISS VECTOR. Fully licensed and trademarked this weapon features next level realism, and absolutely looks he part. This variant is the special edition dual tone version, which features both black and tan parts.

The Double Eagle M62 is a lightweight, bolt action Sniper Rifle which is powered by spring. This means that the Bolt must be pulled back for each shot, just like the real thing, which will compress the Spring whilst loading a BB into the chamber.

An Alloy constructed replica of the lesser-seen TT-33, which holds a total of 11rnds in a single stack Gas Magazine, comes included in a Polymer hard case and offers a realistic gas blowback.

Whether you are a pump action shotgun fan or you fancy a change of pace for CQB, the CM.370M M1014 M4 Super 90 Full Stock will be an asset to your game, if you have the skills that is! This shotgun is built on the proven Tokyo Marui tri-shot design but boasts full metal construction to make it more realistically weighted with the cold, means business feel of metal in the hands.

If you are building a British Army or USMC loadout, this shotgun is ideal to throw on a sling and keep handy for close encounters, especially if you are the type that is through the door first, leading from the vanguard. Whether you are a CQB specialist or you want a realistic shotgun secondary to enhance your loadout, the CYMA CM.370M is a great choice!

The CYMA CM.051 is a replica of the classic 'Chicago Typewriter' Thompson Submachine Gun, AKA the "Tommy Gun". The CM.051 comes complete with all the correct furniture, in a beautiful and well-toned Faux Wood finish. 

This version of the Thompson has a few key differences from the M1A1 Military variant, mainly cooling fins on the barrel and the integrated Foregrip with/ finger grooves. Complete with a 550rnd Drum Magazine, this is the perfect Airsoft Electric Gun for someone who wants to stand out from the crowd, is interested in a historical or roleplay loadout, or just wants to suppress the enemy to bits using something that isn't an M4, the CYMA CM.051 is perfect for you.

If you are looking for a cheap yet decent holster filler, Golden Eagle has something you'll like! The G.E Hi-capa 4.3 is a full metal clone of the Tokyo Marui, meaning 100% compatibility with aftermarket upgrades and the intense recoil and realistic feel of full metal straight out of the box.

Though it is based on the Tokyo Marui 4.3, the Golden Eagle Hi-capa has a 6.02mm tightbore inner barrel, adding to its accuracy potential, improving gas efficiency and raising FPS slightly. Golden Eagle also saw fit to add an 11mm CW female threaded outer barrel, meaning you don't need a new outer barrel to fit a tracer or suppressor, just an 11mm CW to 14mm CCW adapter. Unlike many other cheap GBB pistols, the Golden Eagle Hi-capa feels buttery smooth when cycling and is remarkably consistent, pointing to well-made internals and tight tolerances.

Whether its fate is to be your trusty sidearm, ready for close encounters, or it is destined to be built up into a Speedsoft monster, bristling with upgrades, the Golden Eagle Hi-capa will serve you well!

A gorgeous and modern Gas Blow Back Pistol which features G&G's Whirl Valve, an external HOP adjust, ambidextrous controls and a tough Polymer construction with lots of beautiful styling.

A gorgeous and modern Gas Blow Back Pistol which features G&G's Whirl Valve, an external HOP adjust, ambidextrous controls and a tough Polymer construction with lots of beautiful styling.

A gorgeous and modern Gas Blow Back Pistol which features G&G's Whirl Valve, an external HOP adjust, ambidextrous controls and a tough Polymer construction with lots of beautiful styling.

If you want to start your Airsoft adventure with a realistic full metal platform or you have your eye on an MK18 MOD.1, the Delta Armory MK18 MOD.1 ALPHA™ should suit you! This AEG is based on the standard issue rifle of the US Navy SEALs but with some modern external enhancements mimicking high-end civilian tactical setups. 

Being an AEG of the ALPHA™ line, this MK18 MOD.1 is considerably pre-upgraded straight out of the box, boasting a reinforced gearbox shell, SHS piston with a full steel tooth rack, a quick change ball bearing spring guide and a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit for impressive long-range effectiveness. 

With more Picatinny rails than you'll ever need, a unique modern receiver design and the impressive Delta Armory battery stock, the MK18 MOD.1 ALPHA™ is perfect for skirmishers who want the realistic feel of full metal and the performance to back it up!

The VX9 gas blowback Airsoft pistol was designed by VORSK and based on the venerable 1911 handgun design. VORSK has taken a look at the 1911 platform and made its own tweaks, giving it a fresh combination of classic and modern looks inspired by a well-known video game starring a bald man with a red tie. This pistol comes as a pair, including 2 VX9 GBB pistols, 2 suppressors, 2 standard magazines and a pair of extended magazines, all nicely displayed in a presentation box. 

If you have plans to upgrade an SMG-5 to shoot like a laser beam, with the rate of fire of a minigun, why bother doing all the legwork and fine-tuning yourself? The Bolster Tuned CM.041 SMG-5 Upgraded AEG; Warhead Edition is the latest generation of the well-received Bolster Tuned CM.041 series, put together by the same team that built the ultra-high-end Bolster Armouries ONYX AEG series and benefits from all the experience and expertise gained from a lifetime of Airsoft tech work and several successful Bolster Tuned AEG drops.

This new generation of Tuned SMG-5 is rocking a Warhead 27K Brushless Motor, Bolster Armouries EZO bearings, a Bolster Armouries AOE Correction Washer along with complimentary parts to keep it running reliably long term. Replacing the basic CYMA ETU, we have the space-aged Gate ASTER™ ETU, offering a wealth of programming options and equipped with the latest EXPERT Firmware. The HOP-up has been modified with Bolster Armouries HOP-up screws for better air seal and setting retention and a Prometheus Purple HOP-up rubber and Nub was added to extend the range out to 60 meters and beyond. An FPS Softair Carbon Fibre Reinforced Tappet Plate ensures reliable feeding with the powerful Warhead brushless motor and an SHS Hardened Steel D Type Pinion Gear was added to cope with the higher levels of torque and speed. Unlike other custom Airsoft gun services, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

A lot of extra work was put in to refine the mass-produced CYMA gearbox and make it run like a Bolster. The inner surfaces of the gearbox have been polished for reduced friction and modified to house the ASTER™ ETU. The cylinder windows have been radiused, increasing the strength of the shell to withstand the force of repeated piston impacts and the bearing holes have been smoothed out to reduce friction. The angle of engagement has also been corrected, meaning 11.1V LiPo's are a go for the upgraded CM.041 so you can hose the enemy down with a torrent of BBs like a fireman hoses a blaze.

With upgrades added and work done, the price has increased, but by a far smaller margin than it would if you took a stock CM.041 to a technician and paid for this amount of work to be done. Finally, we can pick up and play with an exceptionally well-built AEG with all the fine-tuning necessary for exceptional performance already complete, and done with care, to an exacting standard. 

When we tested the Warhead Edition we were absolutely stunned; it's even faster than the original Tuned CM.041! 320 FPS on the dot with remarkable consistency, 60m+ effective range and an absolutely scary rate of fire of 27 rounds per second; more than enough to outshoot anything else you can buy off the shelf!

If you have plans to upgrade an SMG-5 to shoot like a laser beam, with the rate of fire of a minigun, why bother doing all the legwork and fine-tuning yourself? The Bolster Tuned CM.041 SMG-5 Upgraded AEG; Warhead Edition is the latest generation of the well-received Bolster Tuned CM.041 series, put together by the same team that built the ultra-high-end Bolster Armouries ONYX AEG series and benefits from all the experience and expertise gained from a lifetime of Airsoft tech work and several successful Bolster Tuned AEG drops.

This new generation of Tuned SMG-5 is rocking a Warhead 27K Brushless Motor, Bolster Armouries EZO bearings, a Bolster Armouries AOE Correction Washer along with complimentary parts to keep it running reliably long term. Replacing the basic CYMA ETU, we have the space-aged Gate ASTER™ ETU, offering a wealth of programming options and equipped with the latest EXPERT Firmware. The HOP-up has been modified with Bolster Armouries HOP-up screws for better air seal and setting retention and a Prometheus Purple HOP-up rubber and Nub was added to extend the range out to 60 meters and beyond. An FPS Softair Carbon Fibre Reinforced Tappet Plate ensures reliable feeding with the powerful Warhead brushless motor and an SHS Hardened Steel D Type Pinion Gear was added to cope with the higher levels of torque and speed. Unlike other custom Airsoft gun services, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

A lot of extra work was put in to refine the mass-produced CYMA gearbox and make it run like a Bolster. The inner surfaces of the gearbox have been polished for reduced friction and modified to house the ASTER™ ETU. The cylinder windows have been radiused, increasing the strength of the shell to withstand the force of repeated piston impacts and the bearing holes have been smoothed out to reduce friction. The angle of engagement has also been corrected, meaning 11.1V LiPo's are a go for the upgraded CM.041 so you can hose the enemy down with a torrent of BBs like a fireman hoses a blaze.

With upgrades added and work done, the price has increased, but by a far smaller margin than it would if you took a stock CM.041 to a technician and paid for this amount of work to be done. Finally, we can pick up and play with an exceptionally well-built AEG with all the fine-tuning necessary for exceptional performance already complete, and done with care, to an exacting standard. 

When we tested the Warhead Edition we were absolutely stunned; it's even faster than the original Tuned CM.041! 320 FPS on the dot with remarkable consistency, 60m+ effective range and an absolutely scary rate of fire of 27 rounds per second; more than enough to outshoot anything else you can buy off the shelf!

An Airsoft 6mm replica SMG-5 SD6, manufactured by Jing Gong. Comes supplied with an integrated suppressor for looks and to slightly dampen muzzle report.

If you want the gucci look but you don't want to part with those gucci bucks, Double Bell has something you may like! The BY-817 M-416 A5 AEG is styled to match a certain real-world rifle we all know and love and boasts full metal construction, fantastic attention to detail and pre-upgraded internals including a 6.03mm tightbore inner barrel, reinforced steel gears and a quick change spring system for easy power tuning.

As with the latest iteration of the real rifle, the Double Bell AEG is also rocking a full set of ambidextrous controls, making this a fantastic platform for left-handed shooters and those who use shoulder-to-shoulder transitions to make the best use of surrounding cover. Whether you run a special forces loadout or you are looking for a lefty-friendly AR platform with an elite look, the Double Bell M-416 A5 should suit you perfectly!

If you want the gucci look but you don't want to part with those gucci bucks, Double Bell has something you may like! The BY-817 M-416 A5 AEG is styled to match a certain real-world rifle we all know and love and boasts full metal construction, fantastic attention to detail and pre-upgraded internals including a 6.03mm tightbore inner barrel, reinforced steel gears and a quick change spring system for easy power tuning.

As with the latest iteration of the real rifle, the Double Bell AEG is also rocking a full set of ambidextrous controls, making this a fantastic platform for left-handed shooters and those who use shoulder-to-shoulder transitions to make the best use of surrounding cover. Whether you run a special forces loadout or you are looking for a lefty-friendly AR platform with an elite look, the Double Bell M-416 A5 should suit you perfectly!

I you're looking for some shotgun fun for CQB or as a cheeky sidearm to knockabout with, this budget friendly shotty comes with some nifty features, such as single shot pump action, a 20mm railed upper barrel and body, as well as adjustable HOP-up and two sling plate attachments.

Cheap thrills don't come much better than this!

A Gas Blowback Airsoft Pistol, based on the infamous 1911 Platform but with a gorgeous Brushed Aluminium finish on the Slide and Frame. With Full Metal construction and Real Wood Pistol Grips, the RAVEN 1911 Brushed Alu is a seriously realistic and good-looking Sidearm.

If you love that competition styling in a sidearm but don't have a thousand quid in your pocket, VORSK is here to make your dreams a reality! The CS Defender Pro 1911 GBB Pistol is styled after real steel competition-optimised handguns and comes with a built-in compensator, flared magazine well, ported slide and gorgeous real wood/rubber hybrid grips pre-installed.

Building on VORSK's pedigree of offering some seriously slick full metal GBB pistol designs in an affordable package with loads of spare bits included, the CS Defender gives you the option of running it in either compensated or combat configurations. In the latter state, it is compatible with 12mm CW female thread adapters so you can equip it with a tracer unit for some CQB intimidation and an instinct-aiming advantage. Whether this is your first sidearm or you want something to compliment your collection that has a bit more flare and head-turning good looks, the CS Defender Pro should do the job, and do it well!

If you're in the market for what is probably the most iconic SMG design the world has ever known but you want it cheap, the Jing Gong JG069 SMG-5J SMG AEG should suit you perfectly. This SMG-5 AEG replicates one of the most modern SMG-5 variants, the "J" model first issued to the Japanese Armed Police, and is constructed predominantly from high density polymer to keep the build light, agile and affordable. 

Internally, the JG069 is based on the Tokyo Marui SMG-5 A5, meaning full compatibility with aftermarket upgrades for its basic yet functional alloy version 2 gearbox. All of the iconic SMG-5 details are present externally, including its claw-mount compatible receiver, tri-lug muzzle device and ambidextrous fire controls. If you need an SMG-5 in lightweight and cost-effective form, the Jing Gong JG069 SMG-5J SMG AEG is exactly that!

If you like your shotguns with a menacing, modern aesthetic, the FABARM STF 12 Compact from BO Dynamics should suit you perfectly! This licenced replica of the real steel STF 12 boasts full metal construction and the choice of either 3 or 6 BBs per trigger pull, giving you a shotgun-like spread which is perfect for engaging fast-moving targets.

The real steel STF 12 is Italian-made, meaning it comes with quite the pedigree as a shotgun from the land of high-end, world-beating shotguns. The STF 12 roughly follows the same external layout as the M870 but is bristling with ergonomic enhancements, including its side folding stock, ergonomic pistol grip, quick detach upper 20mm Picatinny rail, light enhancing iron sights and railed pump arm, ready for your laser or flashlight. If you used the '870 before, you'll find the STF 12 familiar in the important ways but better in all the others!

Whether you're working on a sci-fi style loadout with a shotgun primary or simply need an ultra-modern breaching platform as the first man into the room in CQB, the BO Dynamics FABARM STF 12 Compact Pump-Action Gas Shotgun will be an asset to you!

If you like your shotguns with a menacing, modern aesthetic, the FABARM STF 12 Compact from BO Dynamics should suit you perfectly! This licenced replica of the real steel STF 12 boasts full metal construction and the choice of either 3 or 6 BBs per trigger pull, giving you a shotgun-like spread which is perfect for engaging fast-moving targets.

The real steel STF 12 is Italian-made, meaning it comes with quite the pedigree as a shotgun from the land of high-end, world-beating shotguns. The STF 12 roughly follows the same external layout as the M870 but is bristling with ergonomic enhancements, including its side folding stock, ergonomic pistol grip, quick detach upper 20mm Picatinny rail, light enhancing iron sights and railed pump arm, ready for your laser or flashlight. If you used the '870 before, you'll find the STF 12 familiar in the important ways but better in all the others!

Whether you're working on a sci-fi style loadout with a shotgun primary or simply need an ultra-modern breaching platform as the first man into the room in CQB, the BO Dynamics FABARM STF 12 Compact Pump-Action Gas Shotgun will be an asset to you!

If you put realism above all and appreciate an immersive firing experience, the Umarex BERETTA PMX will be an asset to your arsenal. This unique SMG was only revealed in the real steel world a handful of years ago and is derived from the iconic Beretta M12 SMG but redressed for 21st-century combat.

The PMX boasts ambidextrous controls across the design, a high density polymer upper and lower receiver with an aluminium sub-receiver, ambidextrous steel sling points and the front and rear and a rock solid side folding stock which combines the best aspects of other folding stock designs. The highlight of the PMX is its gas blowback action, providing immersive recoil with each shot and a 100% realistic manual of arms, meaning racking the charging handle before the first shot and hitting the bolt catch after a satisfying reload. If you love the challenge of working a GBBR under pressure and appreciate snappy and violent recoil, you'll love the Umarex BERETTA PMX.

An 6mm Airsoft Gas Blowback Pistol with a lightweight and efficient slide, this is an ideal 'beginners Gas Blowback Pistol'.