All Two-Tone Airsoft Guns

If you're looking for a compact and lightweight AR platform with stealthy styling, the Specna Arms SA-FH06 FLEX™ HAL¹ ETU™ M4/AR-15 AEG is a great choice. This AEG follows Specna's "FLEX" build standard, with full polymer externals, plus, an alloy flash hider and outer barrel. It's ideal for skirmishers who like to move fast and keep their energy high all day.

The latest SA-FH06 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive considering its low price point!

A Gas Blowback Airsoft Pistol built by WE Europe as part of their EU-Series Pistol Range. The weapon is constructed with a lightweight and durable Polymer Lower Frame and an Alloy Slide, making it a Lightweight yet Durable sidearm.

Wanting to get into Airsoft skirmishing and are a fan of the world renowned and iconic AK47? Look no further than the CM.028.

With it's tried and true design, this AK makes for a great starter rifle and a great budget friendly gun that is reliable, thanks to it's alloy internals, barrel and top cover and also lightweight thanks to it's polymer construction.

Included in the package is a 525rnd Hi-cap magazine so you're ready to go with a huge BB capacity allowing you to lay down some serious supressing fire right out of the box.

If you need an SMG but want to stand out from the crowd, the WE06 Standard Version from WELL PRO is one way to do it! This SMG replicates the latest in the line of Russian AK-derived submachine guns, known as the PPK-20 Compact and based on the well-known PP-19-01 Vityaz.

While the Advanced Version leads the pack, the Standard Version of WELL PRO's PPK-20 Compact has more than its fair share of internal goodness. A 6.02mm tightbore inner barrel provides additional accuracy to compensate for the short overall length, the 18:1 ratio steel gears run on 8mm slide bearings for a smoother gearbox sound and the system is powered by a mighty 20K RPM high-speed motor kept in check by a protective in-line MOSFET.

Boasting a mix of M-LOK negative space attachment slots, 20mm Picatinny rails, ambidextrous fire controls and an advanced side folding retractable stock, you would be forgiven for thinking this platform had Western origins as it is very rare indeed for a Russian platform to give some thought to ergonomics. Consider this the Ruskie UTR45; at the cutting edge of external design with internals and performance that will surprise you (and the enemy team)!

If you love the looks of the DA-C05 Silent Ops but wish it was longer with more metal parts, the Delta Armory DA-B08 BRAVO™ 9" SilentOps M4/AR-15 AEG is just what you need! BRAVO™ AEGs are constructed with strong high-density polymer receivers and aluminium handguards, making them perfect for those who want to step a bit closer to realism while maintaining maximum energy and agility in game. 

The Silent Ops 9" is rocking a quad rail handguard styled after the KAC Freefloat RIS paired with a suppressor hidden beneath, giving it the stealthy styling of shorter suppressed ARs with enough length to hide a 400mm 6.03mm tightbore inner barrel inside for maximum long range effect. The tightbore is paired with a rotary HOP-up unit and a reinforced version 2 gearbox equipped with a quick change spring guide, 7mm ball bearing bushings and an SHS piston and tappet plate, resulting in a build focussed on reliability and strength with a slight accuracy advantage for good measure!

Whether you're looking for a DMR base gun or a long-barreled AR platform which won't weigh you down, the Delta Armory DA-B08 BRAVO™ 9" SilentOps M4/AR-15 AEG will suit your needs perfectly!

What's better than a Gas Blowback 1911 with Custom External Furniture that is compatible with RAVEN MEU Mags (meaning it can take Green Gas or CO2 Magazines depending on the weather), and comes supplied with both a Standard and Extended magazine?

TWO Gas Blowback 1911s with Custom External Furniture that are compatible with RAVEN MEU Mags (meaning they can take Green Gas or CO2 Magazines depending on the weather), and both come supplied with a Standard and Extended Magazine!

This double pack of Pistols comes included with 2 x Gas Magazines (as you would expect), but also 2 x Extended Gas Magazines, giving you a total of four Mags out of the box!

Think AK, but bigger! The RPK is everything you love about the iconic AK, except it has been supersized. The CYMA CM.052 RPK-74 AEG is a faithful replica of the Russian support rifle. This AEG looks brilliant and shoots just as wonderfully, this is something that can be observed in all of CYMA's full metal AK platforms.

The CM.052 sports highly realistic construction with a plethora of steel parts, a full-sized dummy bolt carrier, a steel bipod and authentic real wood furniture matching the iconic rifle that was issued to Russian armed forces. The RPK-74 takes standard AK47/74 AEG magazines, including drum mags, and comes with an extended 45-round style high cap magazine which holds a stupendous 750 BBs!

If you're loving the latest and greatest Daniel Defense releases but are looking for a CQB platform, here you go! The EMG Daniel Defense DDM4® PDW SBR AEG is a full metal PDW style M4/AR-15 AEG boasting licenced trademarks, flawless replica DD furniture and the absolutely ferocious internals CYMA Platinum AEGs are renowned for.

On the outside, the DDM4 PDW is rocking a DD linear compensator, MFR XL M-LOK handguard, Daniel Defense marked receiver complete with .300BLK calibre markings, a great replica of the DD "Tornado" pistol grip and a compact PDW sliding stock. Inside the box, you're even treated to a battery extension unit, allowing for normal buffer tube batteries to fit into this micro AR.

Inside, things get even better! Built around a version 2 gearbox fitted with the CYMA Platinum MOSFET, 13:1 CNC steel high-speed gears running on 8mm ball bearing bushings, CNC aluminium piston and cylinder head driven by a high-speed Neodymium magnet motor; the DDM4 PDW is a serious CQB menace and an asset to fast-moving outdoor skirmishers!

Sometimes in Airsoft, you think you've seen it all...and then something like this arrives. Introducing the Storm Airsoft PC1, an Airsoft Sniper rifle which breaks the mould in every single way. Powered by an Electro-Pneumatic internal system which is unlike anything else we have seen in Airsoft, the PC1 requires a LiPo battery to power the internal electromagnetic solenoid, but other than this, there is no spring, no gearbox, no gas...everything runs via air compressed during cocking.

The PC1 is designed and manufactured in France, with the exception of the 6.05mm tightbore inner barrel and HOP-up rubber which are provided by Silverback Airsoft, famed for its successful SRS Bullpup sniper rifle. Just like the SRS, the PC1 boasts an unbeatable barrel length to overall length ratio thanks to its bullpup configuration, making this a very space-efficient sniper platform; perfect for snipers who value mobility.

This, the Deluxe Pack includes a 4-16x44 illuminated riflescope with sunshade, a one-piece spirit level scope mount, a 14mm CCW threaded suppressor made from carbon fibre and a superb quality carry case which fits all these generous extras inside with a neat and professional look. 

With a fully ambidextrous design, ultra-compact and ridiculously lightweight build and performance to rival the very best out there, the PC1 is a radical reinvention of the Airsoft sniper rifle concept and is certain to change the game. If you are ready to jump on board with this cutting-edge piece, as much an engineering marvel as it is an Airsoft sniper rifle, you are in for a real treat!

Sometimes in Airsoft, you think you've seen it all...and then something like this arrives. Introducing the Storm Airsoft PC1, an Airsoft Sniper rifle which breaks the mould in every single way. Powered by an Electro-Pneumatic internal system which is unlike anything else we have seen in Airsoft, the PC1 requires a LiPo battery to power the internal electromagnetic solenoid, but other than this, there is no spring, no gearbox, no gas...everything runs via air compressed during cocking.

The PC1 is designed and manufactured in France, with the exception of the 6.05mm tightbore inner barrel and HOP-up rubber which are provided by Silverback Airsoft, famed for its successful SRS Bullpup sniper rifle. Just like the SRS, the PC1 boasts an unbeatable barrel length to overall length ratio thanks to its bullpup configuration, making this a very space-efficient sniper platform; perfect for snipers who value mobility.

This, the Deluxe Pack includes a 4-16x44 illuminated riflescope with sunshade, a one-piece spirit level scope mount, a 14mm CCW threaded suppressor made from carbon fibre and a superb quality carry case which fits all these generous extras inside with a neat and professional look. 

With a fully ambidextrous design, ultra-compact and ridiculously lightweight build and performance to rival the very best out there, the PC1 is a radical reinvention of the Airsoft sniper rifle concept and is certain to change the game. If you are ready to jump on board with this cutting-edge piece, as much an engineering marvel as it is an Airsoft sniper rifle, you are in for a real treat!

Sometimes in Airsoft, you think you've seen it all...and then something like this arrives. Introducing the Storm Airsoft PC1, an Airsoft Sniper rifle which breaks the mould in every single way. Powered by an Electro-Pneumatic internal system which is unlike anything else we have seen in Airsoft, the PC1 requires a LiPo battery to power the internal electromagnetic solenoid, but other than this, there is no spring, no gearbox, no gas...everything runs via air compressed during cocking.

The PC1 is designed and manufactured in France, with the exception of the 6.05mm tightbore inner barrel and HOP-up rubber which are provided by Silverback Airsoft, famed for its successful SRS Bullpup sniper rifle. Just like the SRS, the PC1 boasts an unbeatable barrel length to overall length ratio thanks to its bullpup configuration, making this a very space-efficient sniper platform; perfect for snipers who value mobility.

This, the Deluxe Pack includes a 4-16x44 illuminated riflescope with sunshade, a one-piece spirit level scope mount, a 14mm CCW threaded suppressor made from carbon fibre and a superb quality carry case which fits all these generous extras inside with a neat and professional look. 

With a fully ambidextrous design, ultra-compact and ridiculously lightweight build and performance to rival the very best out there, the PC1 is a radical reinvention of the Airsoft sniper rifle concept and is certain to change the game. If you are ready to jump on board with this cutting-edge piece, as much an engineering marvel as it is an Airsoft sniper rifle, you are in for a real treat!

Looking to get into the sport and start skirmishing? The iconic style of the F226 might be up your street.

Electrically powered, with both semi and fully automatic functionality, the pistol also sports a 20mm RIS / RAS rail to accommodate a wealth of tactical accessories for those more spec ops style missions.

A Polymer gas blowback B9 replica, which has the best of both worlds in regards to good gas efficiency from a Polymer build, as well as some good weight in the hand thanks to metal reinforcement.

Everyone's favourite Puppy-Avenging Pistol is back with a bang, and freshly updated for modern Competition Shooters with a CO2 Magazine out of the box, and a refined and newly cut Slide to reduce overall weight and take its performance into overdrive. If you're looking for a Pistol that is going to make a statement, this is definitely it.

If your pistol isn't cutting it, perhaps you need a bigger sidearm! Enter the VORSK VMP-1C, the compact variant of the VMP-1 gas blowback SMG. The VMP-1C takes the original and deletes the stock and muzzle device for a more compact form ideally suited to CQB and use as a sniper or support gunner's backup platform.

Like the original, the VMP-1C is constructed almost entirely from high density polymer with an alloy outer barrel and steel trim parts, giving you a lightweight, bite-sized platform with a full-size punch. Inside, the platform boasts a 6.03mm tightbore inner barrel for an edge in accuracy, despite its short barrel length. The stunning rate of fire of the original has been maintained, making this lil SMG great for laying down covering fire as you relocate to a more advantageous firing position. If you need a secondary with more firepower than the average, the VMP-1C is ideal for your needs!

If your pistol isn't cutting it, perhaps you need a bigger sidearm! Enter the VORSK VMP-1C, the compact variant of the VMP-1 gas blowback SMG. The VMP-1C takes the original and deletes the stock and muzzle device for a more compact form ideally suited to CQB and use as a sniper or support gunner's backup platform.

Like the original, the VMP-1C is constructed almost entirely from high density polymer with an alloy outer barrel and steel trim parts, giving you a lightweight, bite-sized platform with a full-size punch. Inside, the platform boasts a 6.03mm tightbore inner barrel for an edge in accuracy, despite its short barrel length. The stunning rate of fire of the original has been maintained, making this lil SMG great for laying down covering fire as you relocate to a more advantageous firing position. If you need a secondary with more firepower than the average, the VMP-1C is ideal for your needs!

If you like the look of the iconic 1911, but you live in the current day and not the 1940s, the Army Armament R28 1911 MEU Pistol is for you! This is a modern take on the trusty historical sidearm; it features enhancements such as a 20mm Picatinny frame rail with a skeletonised hammer and trigger.

The standard R28 comes with a 12mm CCW female threaded barrel, whereas the tactical variant includes a pre-attached thread adapter that gives this pistol 14mm CCW male threading, making it ready for suppressors or tracer units. Perfect for a skirmisher who likes their pistol ready for the battlefield!

If you like the look of the iconic 1911, but you live in the current day and not the 1940s, the Army Armament R28 1911 MEU Pistol is for you! This is a modern take on the trusty historical sidearm; it features enhancements such as a 20mm Picatinny frame rail with a skeletonised hammer and trigger.

The standard R28 comes with a 12mm CCW female threaded barrel, whereas the tactical variant includes a pre-attached thread adapter that gives this pistol 14mm CCW male threading, making it ready for suppressors or tracer units. Perfect for a skirmisher who likes their pistol ready for the battlefield!

If you like a classic, you will love the RAVEN R92F. This Gas Blowback pistol boasts full metal construction and replicates the US Army's standard issue sidearm from 1985-2017 in its purest form. The R92F is an iconic pistol design which has been through multiple iterations since its conception and has been featured in innumerable video games, movies and TV shows.

For a full metal GBB pistol, the R92F is remarkably affordable and also boasts a pre-installed 6.03mm tightbore inner barrel to provide the edge when it comes to accuracy. Whether you run a US Army loadout or you're into iconic, timeless pistol designs, the R92F is a perfect fit!

If you like the look of the iconic 1911, but you live in the current day and not the 1940s, the Army Armament R28 1911 MEU Pistol is for you! This is a modern take on the trusty historical sidearm; it features enhancements such as a 20mm Picatinny frame rail with a skeletonised hammer and trigger.

The standard R28 comes with a 12mm CCW female threaded barrel, whereas the tactical variant includes a pre-attached thread adapter that gives this pistol 14mm CCW male threading, making it ready for suppressors or tracer units. Perfect for a skirmisher who likes their pistol ready for the battlefield!

If you like the look of the iconic 1911, but you live in the current day and not the 1940s, the Army Armament R28 1911 MEU Pistol is for you! This is a modern take on the trusty historical sidearm; it features enhancements such as a 20mm Picatinny frame rail with a skeletonised hammer and trigger.

The standard R28 comes with a 12mm CCW female threaded barrel, whereas the tactical variant includes a pre-attached thread adapter that gives this pistol 14mm CCW male threading, making it ready for suppressors or tracer units. Perfect for a skirmisher who likes their pistol ready for the battlefield!

The Double Bell MK12 MOD1 SPR is a 'Special Purpose Rifle', based on the AR Platform and constructed from a mix of Steel, Aluminium and Polymer. This Airsoft Electric Gun is built upon a Version 2 Gearbox that features a Quick Release Spring, allowing you to change the Main Spring without having to fully disassemble the Gearbox. This is an ideal choice for those looking for a base platform for a DMR project, or for someone looking to do a modern-day American Forces loadout.

If you're into the British Army look, this should be your primary! The Ares SA80/L85A3 AEG; Deluxe Standard Issue Set includes everything you'll need to recreate the iconic L85A3 rifle as it is issued to the British Army, including a fantastic replica of the ELCAN Specter LDS 4x optic with the Shield RMS piggyback red dot sight and a Grip Pod replica in desert tan.

Just like the standard version, this beast boasts full metal construction and incredible attention to detail, making it as suitable for skirmishing as it is for display in a museum! The lower and upper receivers are both made from stamped steel, with the modernised A3 handguard and 20mm Picatinny top rail being CNC machined from aluminium for a flawless form and perfectly in-spec attachment interfaces.

Inside, the L85A3 is based around a unique gearbox shell with the Ares EFCS MOSFET, providing programmable fire controls through the Ares EFCS Programming Box (available separately) and preventing trigger lock-ups for a ferocious semi-auto response rate. A high torque motor drives the 18:1 steel gearset, allowing for stronger springs to be installed and further improving trigger response. To add a side of realism to the firing experience, the L85A3 also boasts an electric blowback system, cycling the mock bolt carrier back and forth with each shot and drowning out the gearbox report with a violent "clack-clack-clack".

If you're working on a modern British Army loadout and need a primary to finish it off, you can't ask for much better than the Ares SA80/L85A3 AEG; Deluxe Standard Issue Set. With the correct optic and vertical grip, 2 magazines and a superb quality hard case to store it all in, this is the L85A3 replica package for the skirmisher who wants the most realistic look without any problems sourcing the correct bits!

A super compact Airsoft Single Shot 6mm BB Shotgun, based on the M870 designed for Breaching through doors and going into buildings.

Featuring  a full size stock that make it it a  menacing presence on any battlefield, this Airsoft replica of the iconic M870 if for those of you for an operator's choice to clear rooms in CQB skirmishes and with it's satisfying pump action and tri-shot spread, when enemy insurgents need to be dealt with quickly and efficiently!

With this simple trick, you can turn one gun into two guns! The M203 under-barrel grenade launcher: heavy, manly, and ready to shower an unlucky opponent with a cloud of BBs! This is the 12 Inch full-sized variant, ideally suited to mounting to an M16 or M4A1 with a 14.5 inch barrel, though it will fit all M4 variants and anything with a 20mm rail on the handguard (or elsewhere, heretics!) with the included adaptor.

If you are new to skirmishing or are looking for a lightweight backup AEG in AK flavour, check this out! The S&T AK-105 Sports Line AEG is constructed primarily from high density polymer using the VFC construction style, meaning realistic disassembly for the AK realism nuts!

This AK replicates the AK-105, the mid-length AK designed to replace the AKS-74U in service with Russian special forces. Widely regarded as the best looking AK length, the -105 rocks a 12.4-inch outer barrel and side folding AK-74M stock, making it a handy platform for both indoor and outdoor skirmishes.

Inside, we are treated to a quick change spring system and 18:1 ratio steel gears running on 8mm slide bearings for a smooth gearbox sound and reduced friction. The inner barrel is a 6.02mm tightbore example paired with an alloy slider HOP-up unit so you can get the job done at long range. If you're looking for a platform that is light and fast but it has to be an AK, your needs are finally met!

If you're searching for a compact platform for your aggressive playstyle, the Delta Armory DA-B13 BRAVO™ M4/AR-15 8" M-LOK AEG is one to watch. Externally, this beast is rocking an M-LOK/20mm Picatinny hybrid handguard and the superb Delta Armory battery stock, getting you off the mark with advanced externals ready for your choice of accessories! 

Inside the DA-B13, we are treated to the same pre-upgraded internal parts as the other offerings in Delta's BRAVO™ line, including a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, SHS tappet plate and piston, 7mm ball bearing bushings, a CNC Type A flat trigger and a reinforced V2 gearbox shell. The quick change spring system allows for easy power tuning to meet your local site's limits and the tightbore inner barrel will improve accuracy potential and air efficiency, giving you a few extra FPS from the same power spring. 

If you're new to the game looking for a reliable starting point for your Airsoft adventure with full aftermarket upgrade compatibility and competitive performance straight out of the box, the Delta Armory DA-B13 BRAVO™ M4/AR-15 8" M-LOK AEG suits your needs perfectly!

If you are in the market for a new SMG and you want something that stands out, the S&T UST9 has its own unique look and the performance to back it up! The UST9 is built exactly like the real thing; with a high-density polymer body, metal outer barrel and steel body pins to keep everything firmly together while allowing for quick disassembly. This results in a lightweight and strong platform which does not compromise on realism!

S&T has also added some thoughtful pre-upgraded parts to the UST9 formula; offering a 6.05mm tightbore inner barrel to improve accuracy with less risk of a jam than tighter bores, a pre-installed MOSFET to improve trigger response and rate of fire and a quick change spring system for easy power tuning without needing to open the gearbox shell. If you want an SMG that is realistically built and not an SMG-5 or SMG-7, the UST9 should do the trick!

If you are looking for an SMG but you have experience with the M4/AR-15, an AR-9 platform would suit you perfectly. The Zion Arms PW9 MOD.1 follows the AR-9 design format but is constructed with a CNC 7075 T6 aluminium receiver and handguard making it lighter than a beachball while maintaining superb strength. Unlike many other Airsoft AR-9 SMGs, the PW9 is based on a real steel design, the R&D Precision PW9, and boasts licenced trademarks on its handguard as a homage to the real thing.

The story only gets sweeter when it comes to internals! Inside the PW9 we are treated to a polished 6.03mm tightbore inner barrel, rotary HOP-up unit, a quick change ball bearing spring guide, 19K RPM high-speed motor and the Zion Arms Nebula ETU to top it all off. The Nebula allows you to program the trigger for burst modes of different durations and also improves trigger response and rate of fire by reducing electrical resistance. If you have a mobile playstyle and appreciate a high speed SMG with phenomenal build quality you will definitely appreciate the Zion Arms PW9!