All Two-Tone Airsoft Guns

The Double Eagle M61 Spring Action Sniper is a lightweight and effective Airsoft Sniper Rifle that works by pulling back the Bolt to cock the Spring and feed a BB into the chamber. Unlike most up-market Sniper Rifles, this doesn't require any tinkering out of the box besides setting the Hop Up and using a high quality BB. Firing at ~466FPS w/ 0.2g BBs, you're clear to take it straight out the box and get playing competitively.

If you have plans to upgrade an SMG-5 to shoot like a laser beam, with the rate of fire of a minigun, why bother doing all the legwork and fine-tuning yourself? The Bolster Tuned CM.041 SMG-5 Upgraded AEG; Warhead Edition is the latest generation of the well-received Bolster Tuned CM.041 series, put together by the same team that built the ultra-high-end Bolster Armouries ONYX AEG series and benefits from all the experience and expertise gained from a lifetime of Airsoft tech work and several successful Bolster Tuned AEG drops.

This new generation of Tuned SMG-5 is rocking a Warhead 27K Brushless Motor, Bolster Armouries EZO bearings, a Bolster Armouries AOE Correction Washer along with complimentary parts to keep it running reliably long term. Replacing the basic CYMA ETU, we have the space-aged Gate ASTER™ ETU, offering a wealth of programming options and equipped with the latest EXPERT Firmware. The HOP-up has been modified with Bolster Armouries HOP-up screws for better air seal and setting retention and a 4UANTUM Friction Pro High-Performance Hop Up Buckingwas added to extend the range out to 60 meters and beyond. An FPS Softair Carbon Fibre Reinforced Tappet Plate ensures reliable feeding with the powerful Warhead brushless motor and an SHS Hardened Steel D Type Pinion Gear was added to cope with the higher levels of torque and speed. Unlike other custom Airsoft gun services, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

A lot of extra work was put in to refine the mass-produced CYMA gearbox and make it run like a Bolster. The inner surfaces of the gearbox have been polished for reduced friction and modified to house the ASTER™ ETU. The cylinder windows have been radiused, increasing the strength of the shell to withstand the force of repeated piston impacts and the bearing holes have been smoothed out to reduce friction. The angle of engagement has also been corrected, meaning 11.1V LiPo's are a go for the upgraded CM.041 so you can hose the enemy down with a torrent of BBs like a fireman hoses a blaze.

With upgrades added and work done, the price has increased, but by a far smaller margin than it would if you took a stock CM.041 to a technician and paid for this amount of work to be done. Finally, we can pick up and play with an exceptionally well-built AEG with all the fine-tuning necessary for exceptional performance already complete, and done with care, to an exacting standard.

When we tested the Warhead Edition we were absolutely stunned; it's even faster than the original Tuned CM.041! 330 FPS on the dot with remarkable consistency, 60m+ effective range and an absolutely scary rate of fire of 27 rounds per second; more than enough to outshoot anything else you can buy off the shelf!

If you have plans to upgrade an SMG-5 to shoot like a laser beam, with the rate of fire of a minigun, why bother doing all the legwork and fine-tuning yourself? The Bolster Tuned CM.041 SMG-5 Upgraded AEG; Warhead Edition is the latest generation of the well-received Bolster Tuned CM.041 series, put together by the same team that built the ultra-high-end Bolster Armouries ONYX AEG series and benefits from all the experience and expertise gained from a lifetime of Airsoft tech work and several successful Bolster Tuned AEG drops.

This new generation of Tuned SMG-5 is rocking a Warhead 27K Brushless Motor, Bolster Armouries EZO bearings, a Bolster Armouries AOE Correction Washer along with complimentary parts to keep it running reliably long term. Replacing the basic CYMA ETU, we have the space-aged Gate ASTER™ ETU, offering a wealth of programming options and equipped with the latest EXPERT Firmware. The HOP-up has been modified with Bolster Armouries HOP-up screws for better air seal and setting retention and a 4UANTUM Friction Pro High-Performance Hop Up Buckingwas added to extend the range out to 60 meters and beyond. An FPS Softair Carbon Fibre Reinforced Tappet Plate ensures reliable feeding with the powerful Warhead brushless motor and an SHS Hardened Steel D Type Pinion Gear was added to cope with the higher levels of torque and speed. Unlike other custom Airsoft gun services, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

A lot of extra work was put in to refine the mass-produced CYMA gearbox and make it run like a Bolster. The inner surfaces of the gearbox have been polished for reduced friction and modified to house the ASTER™ ETU. The cylinder windows have been radiused, increasing the strength of the shell to withstand the force of repeated piston impacts and the bearing holes have been smoothed out to reduce friction. The angle of engagement has also been corrected, meaning 11.1V LiPo's are a go for the upgraded CM.041 so you can hose the enemy down with a torrent of BBs like a fireman hoses a blaze.

With upgrades added and work done, the price has increased, but by a far smaller margin than it would if you took a stock CM.041 to a technician and paid for this amount of work to be done. Finally, we can pick up and play with an exceptionally well-built AEG with all the fine-tuning necessary for exceptional performance already complete, and done with care, to an exacting standard.

When we tested the Warhead Edition we were absolutely stunned; it's even faster than the original Tuned CM.041! 330 FPS on the dot with remarkable consistency, 60m+ effective range and an absolutely scary rate of fire of 27 rounds per second; more than enough to outshoot anything else you can buy off the shelf!

If you're looking for a specialised entry tool as the pointman for your team, you can't ask for much better than the BO Dynamics FABARM STF 12 Short Initial Pump-action Gas Shotgun. This licenced replica of the real steel STF 12 Short Initial boasts full metal construction and the choice of either 3 or 6 BBs per trigger pull, giving you a shotgun-like spread which is perfect for engaging fast-moving targets and getting the first kill as your team breaches a room in CQB.

The real steel STF 12 is Italian-made, meaning it comes with quite the pedigree as a shotgun from the land of high-end, world-beating shotguns. The STF 12 roughly follows the same external layout as the M870 but is bristling with ergonomic enhancements, including its ergonomic pistol grip and railed pump arm, ready for your laser or flashlight. If you used the '870 before, you'll find the STF 12 familiar in the important ways but better in all the others!

If you're a Milsim skirmisher seeking a breaching shotgun for close encounters or a CQB specialist needing a platform to get the first shot when bursting into a room, the BO Dynamics FABARM STF 12 Short Initial Pump-action Gas Shotgun will give you what you need!

If you're looking for a specialised entry tool as the pointman for your team, you can't ask for much better than the BO Dynamics FABARM STF 12 Short Initial Pump-action Gas Shotgun. This licenced replica of the real steel STF 12 Short Initial boasts full metal construction and the choice of either 3 or 6 BBs per trigger pull, giving you a shotgun-like spread which is perfect for engaging fast-moving targets and getting the first kill as your team breaches a room in CQB.

The real steel STF 12 is Italian-made, meaning it comes with quite the pedigree as a shotgun from the land of high-end, world-beating shotguns. The STF 12 roughly follows the same external layout as the M870 but is bristling with ergonomic enhancements, including its ergonomic pistol grip and railed pump arm, ready for your laser or flashlight. If you used the '870 before, you'll find the STF 12 familiar in the important ways but better in all the others!

If you're a Milsim skirmisher seeking a breaching shotgun for close encounters or a CQB specialist needing a platform to get the first shot when bursting into a room, the BO Dynamics FABARM STF 12 Short Initial Pump-action Gas Shotgun will give you what you need!

If you like your shotguns with a menacing, modern aesthetic, the FABARM STF 12 Compact from BO Dynamics should suit you perfectly! This licenced replica of the real steel STF 12 boasts full metal construction and the choice of either 3 or 6 BBs per trigger pull, giving you a shotgun-like spread which is perfect for engaging fast-moving targets.

The real steel STF 12 is Italian-made, meaning it comes with quite the pedigree as a shotgun from the land of high-end, world-beating shotguns. The STF 12 roughly follows the same external layout as the M870 but is bristling with ergonomic enhancements, including its side folding stock, ergonomic pistol grip, quick detach upper 20mm Picatinny rail, light enhancing iron sights and railed pump arm, ready for your laser or flashlight. If you used the '870 before, you'll find the STF 12 familiar in the important ways but better in all the others!

Whether you're working on a sci-fi style loadout with a shotgun primary or simply need an ultra-modern breaching platform as the first man into the room in CQB, the BO Dynamics FABARM STF 12 Compact Pump-Action Gas Shotgun will be an asset to you!

If you're in search of a lightweight and high performance platform with the AR-9 aesthetic, the G&G ARP9 2.0 Enhanced Combat Machine AEG can't have escaped your scrutiny! This is the second generation of G&G's superb ARP9 platform, boasting several internal refinements for even more performance and an external overhaul including the G&G GOS-V9 PDW stock and a new CNC aluminium M-LOK handguard.

We think this is the best-looking ARP9 variant yet but also offers more attachment interfaces thanks to its longer handguard and even better results downrange than its still respectable older sibling. Internal improvements include a new generation of ETU and MOSFET made more efficient and compact than ever before, a further reinforced gearbox shell, a redesigned bevel gear to reduce heat build-up and a double O-ring nozzle to enhance air seal qualities. Also present is G&G's latest rotary HOP-up unit, bringing the ARP9 into line with modern Airsoft releases, offering improved setting retention and finer adjustment increments.

The original ARP9 was famously the winner of the Airsoft Players Choice Awards for best AEG several years on the trot and in our assessment, the second generation is even better. If you're after a lightning-fast CQB platform which handles like a dream and gives the enemy team nightmares, the G&G ARP9 2.0 Enhanced Combat Machine AEG is what you need!

An Airsoft 6mm BB Support Gun, designed for use in Airsoft Skirmishes, and is a replica of the famous PKM Heavy Machinegun used widely by Russian Forces around the world.

*Limited Stock/Warranty. Please see special instructions at bottom of page.

An Airsoft 6mm BB Support Gun, designed for use in Airsoft Skirmishes, and is a replica of the famous PKM Heavy Machinegun used widely by Russian Forces around the world.

*Limited Stock/Warranty. Please see special instructions at bottom of page.

Featuring an integrated suppressor and collapsible stock, this is for all you stealthy spec ops players out there.

Perfect for a starter Close Quarters Battle thanks to it's compact size, it features everything you need to get into some action, such as adjustable Hop-up, rotary drum design sights and lightweight design, so you can move from objective to objective with ease, quietly picking off targets on the way.

When you think of shotguns, something like this is always the first image to come to mind. An iconic silhouette with a decorated history, being seen all around the world since its production first began back in 1951. This popularity has carried over to the world of Airsoft and has become a CQB skirmisher's best friend. Nothing quite beats the rush of running around close quarters and vanquishing foes with spreads of BBs as soon as they turn the corner. The multi-BB pump action shots mean even if you can't aim, there's still a chance that the shotgun spread will result in a hit!

This shotgun may look like a previous product, but that's because it's actually the Gen. 2 version of the Golden Eagle Type 870 M8872. This new version looks almost identical except the gas port at the rear of the stock has changed due to issues with a leaky detachable gas tank and unreliable o-rings. The version 2 shotgun has scrapped the removable gas tank and instead installed a fixed gas tank within the stock that can be filled up through the rubber butt plate.

Treat yourself to some CQB satisfaction with the Golden Eagle Type 870 M8872 Railed Gas Shotgun V2 and enjoy the satisfaction of pump action mixed with a 3-shot spread

A Gas Blowback Airsoft Pistol built by WE Europe as part of their EU-Series Pistol Range, and is a faithful replica of the real world pistol it represents. The pistol features a Semi-Automatic Gas Blowback system, meaning that a Single Round is Discharged for every Trigger Pull and also Simulates Recoil for a more realistic experience.

This is the perfect sidearm for any Airsoft player, allowing you to quickly and effectively protect yourself from any threat should your main weapon go down or the enemy engage you in a CQB Environment.

If you've been umming and ahhing about a GBBR but the technical aspects put you off, the G&G MGCR 556 GBB Rifle should give you what you need! This superbly designed gas blowback rifle works just like the real thing when it comes to handling and manipulation but is considerately designed on the inside to ensure it outlasts rival platforms, both in its lifespan and in its cold weather performance.

Externally, the MGCR is a unique design from G&G based on the M4/AR-15 shape but considerably enhanced with a weight-reduced receiver, enlarged ambidextrous controls and a lightweight M-LOK handguard for all your mission essential accessories. The stock depends on which length variant you choose, but all are equipped with internal storage compartments for snacks or batteries and QD sling sockets on either side. Make no mistake, from an external design standpoint, this AR is at the cutting edge!

Inside, we are treated to internals we will probably never need to touch, including an ultra-light aluminium bolt carrier tipping the scales at a mere 108g with the nozzle, a built-in buffer system disguised as a gas piston to reduce wear from the bolt carrier impacting the HOP-up unit and full steel trigger components, including the trigger, sear, hammer, disconnector and valve knocker, with a steel bolt catch thrown in for good measure. Experienced GBBR users will know, when it comes to essential steel GBBR internals, the MGCR ticks all the boxes!

If you've been umming and ahhing about a GBBR but the technical aspects put you off, the G&G MGCR 556 GBB Rifle should give you what you need! This superbly designed gas blowback rifle works just like the real thing when it comes to handling and manipulation but is considerately designed on the inside to ensure it outlasts rival platforms, both in its lifespan and in its cold weather performance.

Externally, the MGCR is a unique design from G&G based on the M4/AR-15 shape but considerably enhanced with a weight-reduced receiver, enlarged ambidextrous controls and a lightweight M-LOK handguard for all your mission essential accessories. The stock depends on which length variant you choose, but all are equipped with internal storage compartments for snacks or batteries and QD sling sockets on either side. Make no mistake, from an external design standpoint, this AR is at the cutting edge!

Inside, we are treated to internals we will probably never need to touch, including an ultra-light aluminium bolt carrier tipping the scales at a mere 108g with the nozzle, a built-in buffer system disguised as a gas piston to reduce wear from the bolt carrier impacting the HOP-up unit and full steel trigger components, including the trigger, sear, hammer, disconnector and valve knocker, with a steel bolt catch thrown in for good measure. Experienced GBBR users will know, when it comes to essential steel GBBR internals, the MGCR ticks all the boxes!

If you're looking for an AR-15 with a unique look, you've found it! Built in partnership between ActionSportGames, ICS and HERA ARMS this rifle is an Airsoft gun like no other. Based on the AR-15 Mil-spec variant of the HERA ARMS CQR this rifle uses ICS's brand new SSS AEG Gearbox design and is officially licensed and fully trademarked.

The Airsoft replica itself is constructed from a mixture of high quality alloys and polymers, with an Alloy Receiver, Handguard Outer Barrel and Internals, with a Polymer Stock, Magazine, Foregrip and Flip-up Iron Sights. The rifle features a high quality finish, with heavy duty materials leading to a highly detailed and realistic looking rifle. The rifle isn't just a quality build, it also come fully trademarked with all the textual markings and logo shown on the real rifle for higher levels of realism.

If you've been umming and ahhing about a GBBR but the technical aspects put you off, the G&G MGCR 556 GBB Rifle should give you what you need! This superbly designed gas blowback rifle works just like the real thing when it comes to handling and manipulation but is considerately designed on the inside to ensure it outlasts rival platforms, both in its lifespan and in its cold weather performance.

Externally, the MGCR is a unique design from G&G based on the M4/AR-15 shape but considerably enhanced with a weight-reduced receiver, enlarged ambidextrous controls and a lightweight M-LOK handguard for all your mission essential accessories. The stock depends on which length variant you choose, but all are equipped with internal storage compartments for snacks or batteries and QD sling sockets on either side. Make no mistake, from an external design standpoint, this AR is at the cutting edge!

Inside, we are treated to internals we will probably never need to touch, including an ultra-light aluminium bolt carrier tipping the scales at a mere 108g with the nozzle, a built-in buffer system disguised as a gas piston to reduce wear from the bolt carrier impacting the HOP-up unit and full steel trigger components, including the trigger, sear, hammer, disconnector and valve knocker, with a steel bolt catch thrown in for good measure. Experienced GBBR users will know, when it comes to essential steel GBBR internals, the MGCR ticks all the boxes!

If you have been looking for the best GLOCK 17 replica around, you will want to consider this! The GLOCK 17 Ultimate Edition from Umarex is the most realistic Glock Airsoft replica on the market by a significant margin. This Glock sports a CNC machined steel slide which is absolutely 1:1 with the real GLOCK 17, unlike others which are GLOCK 21 sized. The outer barrel is also steel, and the magazine is polymer! The result is a GLOCK replica unlike any other, with a completely different feel which perfectly matches the balance and handling of the real thing. This is the Ultimate Glock for collectors!

Double Bell brings us a replica of the pistol from the incredibly popular Sword Art Online Alternative Gun Gale, a custom 1911 with souped-up futuristic furniture. The pistol features compensator extensions, which mount to the lower frame, in addition to a flared magazine base plate for that blocky, experimental, anime-style look.

The body and slide of the pistol are constructed from aluminium alloy and sports the classic 1911 design, including serrated grooves on the slide for ease of racking, but with several unique tweaks. With a skeletonised hammer and flat, speed trigger, this pistol is a sure fire hit for those of you looking for that cyber sci-fi and futuristic aesthetic.

Those in search of a modern AR with a long range leaning, check this out! The DA-A15-ETU ALPHA™ 13" M-LOK M4/AR-15 from Delta Armory brings the cutting-edge styling of the slickest real steel M4s out there along with pre-upgraded internals pushed to the max, making it a serious foe to face down with in an outdoors environment.

As with the other ALPHA™ line AEGs from Delta, the DA-A15-ETU boasts full metal construction with flawless machining throughout, but unlike standard ALPHA™ AEGs, this one is the ETU version. Delta's ETU AEGs are even more upgraded than the standard ALPHA™ line, boasting a pre-installed programmable ETU/MOSFET, a high torque motor, CNC steel 16:1 gears and CNC aluminium piston and cylinder heads. Whether you are going full DMR with this build or using it as it comes, you are very well equipped for long range warfare with the DA-A15-ETU!

If you're searching for a super flexible M4/AR-15 AEG with an ultra-modern aesthetic and internals to rival the best, the Delta Armory R15 FREYA™ Gen.2 13" M4/AR-15 AEG should suit you perfectly. Boasting a full metal build on the outside and pre-upgraded internals inside, the FREYA's party trick is the Delta Armory EAGLE ETU™, offering more programmable functions than previous versions and allowing you to run the FREYA™ as a DMR with semi-auto only and a stronger spring and quickly swap the spring and fire control options for a CQB skirmish the next day. 

Internally, the Gen.2 FREYA™ is better than ever, boasting the perfect combination of the EAGLE™ programmable MOSFET with the best bits of Delta's ETU series internals. These include CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.  

If you're looking for a lesser-seen design with AR compatibility and the best combination of Delta Armory pre-upgraded internals, the R15 FREYA™ Gen.2 13" M4/AR-15 AEG from Delta Armory is a fantastic option and better than ever before!

If you're searching for a super flexible M4/AR-15 AEG with an ultra-modern aesthetic and internals to rival the best, the Delta Armory R15 FREYA™ Gen.2 13" M4/AR-15 AEG should suit you perfectly. Boasting a full metal build on the outside and pre-upgraded internals inside, the FREYA's party trick is the Delta Armory EAGLE ETU™, offering more programmable functions than previous versions and allowing you to run the FREYA™ as a DMR with semi-auto only and a stronger spring and quickly swap the spring and fire control options for a CQB skirmish the next day. 

Internally, the Gen.2 FREYA™ is better than ever, boasting the perfect combination of the EAGLE™ programmable MOSFET with the best bits of Delta's ETU series internals. These include CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.  

If you're looking for a lesser-seen design with AR compatibility and the best combination of Delta Armory pre-upgraded internals, the R15 FREYA™ Gen.2 13" M4/AR-15 AEG from Delta Armory is a fantastic option and better than ever before!

If you're searching for a super flexible M4/AR-15 AEG with an ultra-modern aesthetic and internals to rival the best, the Delta Armory R15 FREYA™ Gen.2 13" M4/AR-15 AEG should suit you perfectly. Boasting a full metal build on the outside and pre-upgraded internals inside, the FREYA's party trick is the Delta Armory EAGLE ETU™, offering more programmable functions than previous versions and allowing you to run the FREYA™ as a DMR with semi-auto only and a stronger spring and quickly swap the spring and fire control options for a CQB skirmish the next day. 

Internally, the Gen.2 FREYA™ is better than ever, boasting the perfect combination of the EAGLE™ programmable MOSFET with the best bits of Delta's ETU series internals. These include CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.  

If you're looking for a lesser-seen design with AR compatibility and the best combination of Delta Armory pre-upgraded internals, the R15 FREYA™ Gen.2 13" M4/AR-15 AEG from Delta Armory is a fantastic option and better than ever before!

If you're looking for a full metal sidearm with a custom aesthetic, the Delta Armory P01 Barracuda EU17 Gas Blowback Pistol is a fantastic choice. Based around Tokyo Marui's EU series internal design but rocking a stylish ported metal slide, light enhancing front iron sight and imitation hand-stippled frame, this EU17 is dressed to impress!

A sophisticated alternative to plane Jane EU17 pistols, the P01 is also equipped with a 12mm CCW female threaded barrel, ready for a thread adapter and a tracer or suppressor along with a 20mm Picatinny frame rail for your laser or tactical flashlight. The frame is the Gen.3 type, often favoured over more modern alternatives thanks to its low-profile mag release being practically immune from accidental mag drops under pressure. Inside, we are also treated to a 6.03mm tightbore inner barrel, giving an accuracy advantage straight out of the box. 

If you aren't into the boring military/police pistol look, the P01 was made with you in mind. Supplied in a hard polymer pistol case complete with internal wave foam, the Delta Armory P01 Barracuda EU17 Gas Blowback Pistol is not only superb value but shoots like a champ too!

If you're looking for a full metal sidearm with a custom aesthetic, the Delta Armory P01 Barracuda EU17 Gas Blowback Pistol is a fantastic choice. Based around Tokyo Marui's EU series internal design but rocking a stylish ported metal slide, light enhancing front iron sight and imitation hand-stippled frame, this EU17 is dressed to impress!

A sophisticated alternative to plane Jane EU17 pistols, the P01 is also equipped with a 12mm CCW female threaded barrel, ready for a thread adapter and a tracer or suppressor along with a 20mm Picatinny frame rail for your laser or tactical flashlight. The frame is the Gen.3 type, often favoured over more modern alternatives thanks to its low-profile mag release being practically immune from accidental mag drops under pressure. Inside, we are also treated to a 6.03mm tightbore inner barrel, giving an accuracy advantage straight out of the box. 

If you aren't into the boring military/police pistol look, the P01 was made with you in mind. Supplied in a hard polymer pistol case complete with internal wave foam, the Delta Armory P01 Barracuda EU17 Gas Blowback Pistol is not only superb value but shoots like a champ too!

If you're preparing for jungle warfare or you're a fan of iconic 20th-century firearms designs, the M16A1 is what you need! The CYMA CM.009B is a near-perfect replica of the real steel M16A1, the refined version of the original M16 which replaced the M14 in US Army and Marine Corps service. Boasting full metal construction and some serious attention to detail, the CM.009B is perfect for reenactment or skirmishers who love a classic with performance to rival the best.

Inside, you will find exactly what you might expect for a CYMA Platinum AEG. The Version 2 gearbox is equipped with a ball bearing spring guide, a polycarbonate piston with a full steel tooth rack, a CNC aluminium silent piston head, a CNC aluminium silent cylinder head and steel gears running on 8mm ball bearing bushings. All these upgraded parts are backed up by a high torque Neodymium magnet motor and the CYMA Platinum MOSFET, providing exceptional performance in every aspect. If you're born to kill and walk the walk, the M16A1 is calling your name.

*Fortunate Son plays quietly in the distance*

If you like a slick, licenced Hi-Capa platform, the EMG STACCATO series should be right up your street! This, the R618 STACCATO 2011 Hi-Capa XC is based on the real steel STACCATO 2011 XC, boasting full metal construction, a pre-installed compensator and official licencing from STACCATO Firearms via EMG and 6mm Pro Shop. This, of course, means full trademarks across the design and unrivalled authenticity; perfect for realism fans!

On the inside, the STACCATO XC is based around the Tokyo Marui Hi-Capa internal system, which should mean most aftermarket upgrades will be compatible, potentially with some fitting required. As it comes, the XC is rocking a 6.03mm tightbore inner barrel, a redesigned nozzle which uses cold-resistant polymer and a new generation magazine valve, maximising gas efficiency and reliability, meaning it is a bit of a beast straight out of the box! If you're in search of a unique Hi-Capa with high-end styling and a respectable real steel pedigree, the EMG R618 STACCATO 2011 Hi-Capa XC belongs on your belt!

If you're searching for a new M4/AR-15 platform for CQB, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is one to watch. This uniquely styled AR is based on the real steel GrandPower Firearms R15 FREYA™, a modern M4/AR-15 with a skeletonised receiver design intended to improve handling and agility. This translates directly to the Delta Armory FREYA™ AEG which boasts a skeletonised receiver and M-LOK handguard, giving it an unnaturally low weight of only 2.1kg despite its realistic full metal build. This is the generation 2 FREYA™ and is kitted out with all the best bits from the ETU series paired with the EAGLE™ MOSFET. A match made in heaven if you ask us!

Inside the version 2 gearbox, we are equipped with CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

The EAGLE™ programmable MOSFET of the original FREYA™ remains, offering even more modes than the previous Delta Armory ETU. These include 3 or 5-round burst, binary trigger, sniper delay, semi-auto only, AUG mode, precocking and active braking. If you love an AR as advanced on the inside as it is externally, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is what you need!

If you're searching for a new M4/AR-15 platform for CQB, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is one to watch. This uniquely styled AR is based on the real steel GrandPower Firearms R15 FREYA™, a modern M4/AR-15 with a skeletonised receiver design intended to improve handling and agility. This translates directly to the Delta Armory FREYA™ AEG which boasts a skeletonised receiver and M-LOK handguard, giving it an unnaturally low weight of only 2.1kg despite its realistic full metal build. This is the generation 2 FREYA™ and is kitted out with all the best bits from the ETU series paired with the EAGLE™ MOSFET. A match made in heaven if you ask us!

Inside the version 2 gearbox, we are equipped with CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

The EAGLE™ programmable MOSFET of the original FREYA™ remains, offering even more modes than the previous Delta Armory ETU. These include 3 or 5-round burst, binary trigger, sniper delay, semi-auto only, AUG mode, precocking and active braking. If you love an AR as advanced on the inside as it is externally, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is what you need!

If you're searching for a new M4/AR-15 platform for CQB, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is one to watch. This uniquely styled AR is based on the real steel GrandPower Firearms R15 FREYA™, a modern M4/AR-15 with a skeletonised receiver design intended to improve handling and agility. This translates directly to the Delta Armory FREYA™ AEG which boasts a skeletonised receiver and M-LOK handguard, giving it an unnaturally low weight of only 2.1kg despite its realistic full metal build. This is the generation 2 FREYA™ and is kitted out with all the best bits from the ETU series paired with the EAGLE™ MOSFET. A match made in heaven if you ask us!

Inside the version 2 gearbox, we are equipped with CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1.

The EAGLE™ programmable MOSFET of the original FREYA™ remains, offering even more modes than the previous Delta Armory ETU. These include 3 or 5-round burst, binary trigger, sniper delay, semi-auto only, AUG mode, precocking and active braking. If you love an AR as advanced on the inside as it is externally, the Delta Armory R15 FREYA™ Gen.2 7" M-LOK M4/AR-15 AEG is what you need!

A great quality straight pull spring bolt action SVD sniper rifle, the AGM SVD is constructed entirely from alloys everywhere the real SVD is! This thing shoots very hot to boot, so make sure you check with your local site before taking this bad boy to a skirmish!