All Two-Tone Airsoft Guns

With this simple trick, you can turn one gun into two guns! The M203 under-barrel grenade launcher is heavy, manly, and ready to shower an unlucky opponent with a cloud of BBs! This is the 9 Inch short variant, ideally suited to mounting to an M4A1 with a 14.5-inch or 10.5-inch barrel, though it will fit all M4 variants and anything with a 20mm rail on the handguard (or elsewhere, heretics!) with the included 20mm Picatinny rail adaptor.

If you're looking for a full metal AEG with great DMR potential, the Delta Armory DA-A15-EGL ALPHA™ 13" M-LOK M4/AR-15 AEG is one to watch. As with the other Delta Armory ALPHA™ line AEGs from Delta, the DA-A15-EGL boasts full metal construction with the unique Delta Armory receiver and flawless machining throughout. 

Unlike the standard DA-A15, this version is rocking the EAGLE™ programmable MOSFET, offering a wide range of programmable fire modes including semi-auto only and sniper delay. Being a relatively long platform, the inclusion of the EAGLE™ makes the DA-A15-EGL a relatively easy DMR conversion, thanks in part to its quick change spring system. The EAGLE™ MOSFET's other tricks include burst modes of various durations, binary trigger, AUG mode, pre-cocking, trigger sensitivity and active braking, giving you loads of advanced features for a remarkably affordable price. 

If you like to skirmish in the great outdoors with a primary at the cutting edge of external design, bristling with accessory attachment points with full compatibility with aftermarket upgrades and an impressively advanced starting point, you'll love the Delta Armory DA-A15-EGL ALPHA™ 13" M-LOK M4/AR-15 AEG!

CQB Experts and ARP9 fans, you're going to want to check this out! The ARP556 3.0 is here, bringing the same energetic performance as the ARP9 3.0 but with a 5.56 style receiver for compatibility with standard M4/AR-15 magazines. If you held out on the ARP9 3.0 because you don't want to buy more mags, get this one, it's just as epic!

Inside the ARP556 3.0, you will find a generous selection of pre-upgraded parts, including G&G's new MOSFET integrated gearbox, known as the "MIG". The MIG features G&G's new MOSFET system which is smaller and more efficient than ever before, and a QD spring guide to allow for easy power tuning without needing to take the gearbox apart. Other innovations include a new side folding stock system, known as the CHFS, and a new double-feed magazine. The other awesome G&G pre-upgraded internals remain, including the epic 25,000 RPM high speed motor which is ready to provide the thunderous rate of fire the ARP9 and ARP556 are known for.

If you're searching for the ideal CQB primary, this is practically it. With a bite-sized external form but king-size performance, the ARP556 3.0 is a piece to contend with up close and will be an asset to any aggressive outdoors skirmisher who values an intense rate of fire and lightweight yet rock-solid build!

If you're in the market for a MK18 and you want the latest version, the EMG Daniel Defense DD4™ MK18 RIII 10.3" AEG is exactly what you need! This full metal M4/AR-15 AEG boasts official licencing from Daniel Defense and is a perfect match for the latest MK18 style rifle in the DD4™ series, including flawless replicas of the MK18 RIS III handguard, the "Grip-N-Rip" charging handle, "Tornado" pistol grip and DD Buttstock. This thing is all Daniel and we love it!

This beast is manufactured by CYMA Platinum for EMG, meaning we are treated to some of the best out-of-the-box internals around. Inside, you will find a high speed Neodymium magnet motor driving a 13:1 CNC steel high speed gearset running on 8mm ball bearing bushings, kept in check by the CYMA Platinum MOSFET. The cylinder and piston heads are both the silent types, CNC machined from aluminium for maximum strength and flawless air seal. The inner barrel is also a 6.03mm tightbore, giving you an accuracy edge and the ability to challenge long rifles in the great outdoors.

Whether you're a Daniel Defense fan or looking for a modern, M-LOK-equipped platform with gorgeous ergonomic furniture and build quality to rival the best, the DD4 MK18 RIII from EMG is perfectly suited to your needs!

If you're in the market for a MK18 and you want the latest version, the EMG Daniel Defense DD4™ MK18 RIII 10.3" AEG is exactly what you need! This full metal M4/AR-15 AEG boasts official licencing from Daniel Defense and is a perfect match for the latest MK18 style rifle in the DD4™ series, including flawless replicas of the MK18 RIS III handguard, the "Grip-N-Rip" charging handle, "Tornado" pistol grip and DD Buttstock. This thing is all Daniel and we love it!

This beast is manufactured by CYMA Platinum for EMG, meaning we are treated to some of the best out-of-the-box internals around. Inside, you will find a high speed Neodymium magnet motor driving a 13:1 CNC steel high speed gearset running on 8mm ball bearing bushings, kept in check by the CYMA Platinum MOSFET. The cylinder and piston heads are both the silent types, CNC machined from aluminium for maximum strength and flawless air seal. The inner barrel is also a 6.03mm tightbore, giving you an accuracy edge and the ability to challenge long rifles in the great outdoors.

Whether you're a Daniel Defense fan or looking for a modern, M-LOK-equipped platform with gorgeous ergonomic furniture and build quality to rival the best, the DD4 MK18 RIII from EMG is perfectly suited to your needs!

Manufactured by KRYTAC this is an Airsoft replica of the world famous KRISS VECTOR. Fully licensed and trademarked this weapon features next level realism, and absolutely looks he part. This variant is the special edition dual tone version, which features both black and tan parts.

Featuring  a full size stock that make it it a  menacing presence on any battlefield, this Airsoft replica of the iconic M870 if for those of you for an operator's choice to clear rooms in CQB skirmishes and with it's satisfying pump action and tri-shot spread, when enemy insurgents need to be dealt with quickly and efficiently!

A None Blowback Airsoft 6mm BB Pistol, designed to look and function like the Dan Wesson Revolver Series.

If you're loving the latest and greatest Daniel Defense releases but are looking for a CQB platform, here you go! The EMG Daniel Defense DDM4® PDW SBR AEG is a full metal PDW style M4/AR-15 AEG boasting licenced trademarks, flawless replica DD furniture and the absolutely ferocious internals CYMA Platinum AEGs are renowned for.

On the outside, the DDM4 PDW is rocking a DD linear compensator, MFR XL M-LOK handguard, Daniel Defense marked receiver complete with .300BLK calibre markings, a great replica of the DD "Tornado" pistol grip and a compact PDW sliding stock. Inside the box, you're even treated to a battery extension unit, allowing for normal buffer tube batteries to fit into this micro AR.

Inside, things get even better! Built around a version 2 gearbox fitted with the CYMA Platinum MOSFET, 13:1 CNC steel high-speed gears running on 8mm ball bearing bushings, CNC aluminium piston and cylinder head driven by a high-speed Neodymium magnet motor; the DDM4 PDW is a serious CQB menace and an asset to fast-moving outdoor skirmishers!

Those looking to build a modern Russian loadout, your prayers have been answered. ARCTURUS has already served us with a fine AK-12 replica, but this version has a few more tricks up its sleeve!

This AK-12 boasts the same majority steel full metal construction, faithful attention to detail and rock solid feel in the hands, but it now has a Perun optical MOSFET pre-installed, a high torque neodymium magnet motor and is pre-programmed for 2 round bursts!

If you ever had plans to get an AK-12 and upgrade it with a TITAN or ASTER, you no longer need to as the Perun MOSFET offers a wide range of functions, including pre-cocking, ROF adjustment, trigger sensitivity adjustment, programmable fire modes, binary trigger and full diagnostics, with a smart fuse built in and a low voltage alarm to save your batteries from damage. This is the ultimate AK-12 replica!

If you're looking for a spring-powered wartime sniper rifle replica with a powerful kick, you have found it in the S&T Kar98K. The authentic looking finish on this is KAR98K superb for the affordable price! It features a sturdy polymer faux wood stock and upper handguard which pairs perfectly with the well-finished metal components, a beautiful replica of an iconic rifle. The metal finish is particularly noteworthy, as it doesn't suggest that this is a replica rifle manufactured in the last few months, it looks authentic and realistic, unlike some other historical Airsoft rifle replicas available on the market. 

This impressive replica isn't all looks though, with an average of 377FPS when testing it definitely packs a punch too. A replica World War 2 sniper rifle that is also skirmishable, now isn't that sweet! An affordable price, a powerful shot and an authentic look, this replica is definitely one for you to consider if you have a classical taste.

The CM.009C MOSFET Edition is an M16 platform Airsoft Electric Gun replica of the A1 variant, which saw heavy use in Vietnam. Much like the CYMA Platinum series, this AEG features a MOSFET and Electronic Unit that makes a serious improvement on trigger response, which is really the only thing you could complain about on the previous model. It also features a Quick Change Spring for quicker and easier Main Spring changes; very helpful if you play at multiple sites with different power limits. If you're looking for either a period accurate Airsoft Gun or you're looking for your first rifle, this is a seriously strong contender.

Another extremely well-equipped pre-upgraded sniper rifle hits the market, but this one is different. The ASG Steyr Mannlicher Scout rifle is based on the real-world design, the brainchild of legendary rifle designer Jeff Cooper. This rifle provides everything you need to snipe with the utmost efficiency. An unusual looking beast, the Steyr Scout is designed by the best, and I have to say, the Airsoft version lives up to my every expectation of this phenomenal platform...

If you have been eyeing up an ARCTURUS AK-12 but haven't yet taken the plunge, the AK-12 with AK-19 stock will make you glad you waited! This updated version of the AK-12 is styled after the latest AK-12 variants offered to civilian shooters, with improved ergonomics thanks to the new AK-19 stock and enhanced pistol grip. As with the previous ARCTURUS AK-12, this AEG is made almost entirely from steel, with a gorgeous stamped steel receiver and top cover and only the muzzle brake being alloy. On the outside, the AK-12 is slicker than ever before!

When it comes to internals, this variant of the AK-12 is equipped with an in-line MOSFET to improve trigger response and rate of fire and extend the life of the microswitch trigger by improving electrical efficiency. The gearbox is pre-upgraded with components focused on reducing friction, including a ball bearing quick change spring guide, ball bearing piston head, steel gears mounted on 8mm bushings and a ball bearing pinion gear to allow the high torque motor to spin more freely at high speeds. The inner barrel is a 6.01mm tightbore constructed from steel for maximum rigidity, and the ARCTURUS AK rotary HOP-up unit is also present, giving you the most modern innovation in AK HOP-ups with easier-to-apply adjustments and superb air seal.

Whether you are fixed on an AK-12 or you are checking out the AK platform options, the ARCTURUS AK-12 with AK-19 stock would make a fantastic, up-to-date primary for any modern Russian military or PMC loadout!

Fans of Russian firearms are going to love this one! The ARCTURUS PP-19-01 ZTAC CQB w/Perun Optical MOSFET; Limited Edition is based on the SMG version of the AK platform but dressed up externally with Zco-style furniture for a super slick, modern look. This beast is constructed almost entirely from steel and CNC machined aluminium, with a flawlessly realistic finish applied to the externals and the hefty feel an AK-derived platform deserves.The fun doesn't end on the outside either!

Inside, we are treated to the best internals ARCTURUS has to offer, including 13:1 CNC steel gears, a 6.01mm tightbore inner barrel, the unique ARCTURUS AK rotary HOP-up unit, a 21TPA high torque motor and a Perun Optical MOSFET with a wide range of programmable features. The result is absolutely incredible; an ultra-snappy trigger, insane rate of fire and all the programming options under the sun. If you've been waiting for the ultimate PP-19-01 AEG, this may well be it!

If you want the gucci look but you don't want to part with those gucci bucks, Double Bell has something you may like! The BY-817 M-416 A5 AEG is styled to match a certain real-world rifle we all know and love and boasts full metal construction, fantastic attention to detail and pre-upgraded internals including a 6.03mm tightbore inner barrel, reinforced steel gears and a quick change spring system for easy power tuning.

As with the latest iteration of the real rifle, the Double Bell AEG is also rocking a full set of ambidextrous controls, making this a fantastic platform for left-handed shooters and those who use shoulder-to-shoulder transitions to make the best use of surrounding cover. Whether you run a special forces loadout or you are looking for a lefty-friendly AR platform with an elite look, the Double Bell M-416 A5 should suit you perfectly!

If you want the gucci look but you don't want to part with those gucci bucks, Double Bell has something you may like! The BY-817 M-416 A5 AEG is styled to match a certain real-world rifle we all know and love and boasts full metal construction, fantastic attention to detail and pre-upgraded internals including a 6.03mm tightbore inner barrel, reinforced steel gears and a quick change spring system for easy power tuning.

As with the latest iteration of the real rifle, the Double Bell AEG is also rocking a full set of ambidextrous controls, making this a fantastic platform for left-handed shooters and those who use shoulder-to-shoulder transitions to make the best use of surrounding cover. Whether you run a special forces loadout or you are looking for a lefty-friendly AR platform with an elite look, the Double Bell M-416 A5 should suit you perfectly!

The Thompson M1A1 is a World War Classic Sub Machine Gun, however, it found its spotlight within darkened back alleys of a Mafia-Run New York City and was catapulted into infamy as the go-to gun for Gangsters and Lawmen during the 1920s due to it's large magazine capacity and high rate of fire. The CM.033 Does an excellent job of preserving the traditional aesthetics of the M1A1, featuring an alloy body and faux wood furniture, the 0.33 is a must-have for any classic Mafia fanatic.

If you have a Hi-Capa-shaped hole in your soul but demand realism, the EMG R613 STACCATO 2011 Hi-Capa XL GBB is what you need to fill it. This full-metal Hi-Capa platform is a perfect replica of the real steel STI/STACCATO Firearms 2011 XL, complete with licenced trademarks across the design in engraved, laser engraved and embossed form. 

As one might expect with such a high-end real steel pedigree, the STACCATO is kitted out externally with a raised light-enhancing front sight paired with an anti-glare rear sight, a red dot mounting plate for RMR footprint red dot sights, a flared magazine well and slide serrations at both the front and rear. From a handling standpoint, this thing is top-tier!

Internally, the STACCATO XL is rocking a 6.03mm tightbore inner barrel, a redesigned nozzle which uses cold-resistant polymer and a new generation magazine valve, maximising gas efficiency and reliability. If you'd love to run a Hi-Capa with high-end styling which doesn't look like everyone else's, the R613 STACCATO 2011 Hi-Capa XL GBB from EMG will be an asset to your loadout!

Those looking for a lightweight backup weapon with fully fledged special forces style looks you can't do much better than the ST46 from S&T. This AEG is designed to look similar to a popular real world platform we all know and love, and that is widely issued to special forces of almost every nation in some form.

The ST46 is constructed almost entirely from high density polymer, making it a great choice for those with less physical strength or those who are a bit clumsy and may bump, scrape or drop their AEG. High density polymer may be less realistic, but it will not show damage as readily as a full metal gun might thanks to its dyed nature allowing it to maintain its looks far better than a painted or anodised finish.

On the inside the ST46 has an alloy version 2 gearbox with a modern Rotary HOP-up unit, setting it up to be competitive and upgrade-compatible without overcomplicating things by reinventing the wheel. If you need a lightweight solution, either as a primary or a backup, the ST46 is the perfect thing!

Perfect for CQB combat and manoeuvrability, the Arcturus AT-ST01 sports an ultra-light full polymer build complete with a slimline 10-inch hybrid M-LOK and Picatinny handguard, that offers you the best of both worlds, ready for any type of attachment you can throw at it.

The rifle also features a full length monolithic top rail and sling plate in addition to slimline low-profile stock, which further keeps you agile on your feet in tight spaces. This AEG has everything you'd hope for in a modern AR, especially in a fast-paced CQB environment.

If you want to keep your setup realistic but need more ammo on tap, the S&T PPSh-41 EBB Submachine Gun AEG; ABS Stock is definitely worth a look. This full metal PPSh-41 SMG replica is packaged with a 2000 round drum magazine which matches that of the real PPSh perfectly, giving you an authentic platform with an almost unlimited ammo capacity! Like the Real Wood version, the vast majority of the metal parts in the build are steel, giving you authentic handling and realistic stamped markings.

To provide a more immersive firing experience, the S&T PPSh-41 is equipped with an Electro-Mechanical blowback mechanism which cycles the mock bolt each time you fire with an exciting "clack clack clack". We would be lying to you if we said this was proper recoil, but the slight jolt and mechanical noise as you fire makes this retro SMG a real blast to shoot, way more interesting than a standard AEG.

As with the Real Wood model, we have a unique gearbox shell inside equipped with 18:1 ratio steel gears running on 8mm steel slide-bearing bushings and the rotary HOP-up unit is paired with a 6.03mm tightbore inner barrel to give you the edge in accuracy. If you want to run a lesser seen platform with plenty of realism and the inherent firepower of a 2000 round drum mag at your disposal, the S&T PPSh-41 EBB Submachine Gun AEG; ABS Stock is a fantastic option!

If you like your shotguns with a menacing, modern aesthetic, the FABARM STF 12 Compact from BO Dynamics should suit you perfectly! This licenced replica of the real steel STF 12 boasts full metal construction and the choice of either 3 or 6 BBs per trigger pull, giving you a shotgun-like spread which is perfect for engaging fast-moving targets.

The real steel STF 12 is Italian-made, meaning it comes with quite the pedigree as a shotgun from the land of high-end, world-beating shotguns. The STF 12 roughly follows the same external layout as the M870 but is bristling with ergonomic enhancements, including its side folding stock, ergonomic pistol grip, quick detach upper 20mm Picatinny rail, light enhancing iron sights and railed pump arm, ready for your laser or flashlight. If you used the '870 before, you'll find the STF 12 familiar in the important ways but better in all the others!

Whether you're working on a sci-fi style loadout with a shotgun primary or simply need an ultra-modern breaching platform as the first man into the room in CQB, the BO Dynamics FABARM STF 12 Compact Pump-Action Gas Shotgun will be an asset to you!

If you like your shotguns with a menacing, modern aesthetic, the FABARM STF 12 Compact from BO Dynamics should suit you perfectly! This licenced replica of the real steel STF 12 boasts full metal construction and the choice of either 3 or 6 BBs per trigger pull, giving you a shotgun-like spread which is perfect for engaging fast-moving targets.

The real steel STF 12 is Italian-made, meaning it comes with quite the pedigree as a shotgun from the land of high-end, world-beating shotguns. The STF 12 roughly follows the same external layout as the M870 but is bristling with ergonomic enhancements, including its side folding stock, ergonomic pistol grip, quick detach upper 20mm Picatinny rail, light enhancing iron sights and railed pump arm, ready for your laser or flashlight. If you used the '870 before, you'll find the STF 12 familiar in the important ways but better in all the others!

Whether you're working on a sci-fi style loadout with a shotgun primary or simply need an ultra-modern breaching platform as the first man into the room in CQB, the BO Dynamics FABARM STF 12 Compact Pump-Action Gas Shotgun will be an asset to you!

If you've been waiting for the return of the Delta Armory FREYA™ series, this will get you going! The Delta Armory R15 FREYA™ Gen.2 10" M-LOK M4/AR-15 AEG is the latest in the FREYA™ lineup, equipped with the same super slick skeletonised externals and EAGLE™ programmable MOSFET as the original with the exceptional pre-upgraded gearbox parts from the ETU series. 

These include CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1. 

If you're in the market for a lightweight full metal AR platform kitted out with pre-upgraded parts throughout, the Delta Armory R15 FREYA™ Gen.2 10" M-LOK M4/AR-15 AEG should suit you perfectly. The marriage of the best bits of both the Delta Armory EAGLE™ and ETU series in the popular FREYA™ skeletonised externals makes the FREYA™ Gen.2 a beast in whatever environment it finds itself in!

If you've been waiting for the return of the Delta Armory FREYA™ series, this will get you going! The Delta Armory R15 FREYA™ Gen.2 10" M-LOK M4/AR-15 AEG is the latest in the FREYA™ lineup, equipped with the same super slick skeletonised externals and EAGLE™ programmable MOSFET as the original with the exceptional pre-upgraded gearbox parts from the ETU series. 

These include CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1. 

If you're in the market for a lightweight full metal AR platform kitted out with pre-upgraded parts throughout, the Delta Armory R15 FREYA™ Gen.2 10" M-LOK M4/AR-15 AEG should suit you perfectly. The marriage of the best bits of both the Delta Armory EAGLE™ and ETU series in the popular FREYA™ skeletonised externals makes the FREYA™ Gen.2 a beast in whatever environment it finds itself in!

If you've been waiting for the return of the Delta Armory FREYA™ series, this will get you going! The Delta Armory R15 FREYA™ Gen.2 10" M-LOK M4/AR-15 AEG is the latest in the FREYA™ lineup, equipped with the same super slick skeletonised externals and EAGLE™ programmable MOSFET as the original with the exceptional pre-upgraded gearbox parts from the ETU series. 

These include CNC steel 16:1 high-speed gears, a CNC steel cylinder and spring guide, a CNC aluminium piston head and cylinder head and a high torque motor to top it off. These parts join the usual Delta Armory SHS reinforced tappet plate, SHS piston and 6.03mm tightbore inner barrel, resulting in an impressive down-range effect and a significant improvement over the original but still respectable FREYA™ Gen.1. 

If you're in the market for a lightweight full metal AR platform kitted out with pre-upgraded parts throughout, the Delta Armory R15 FREYA™ Gen.2 10" M-LOK M4/AR-15 AEG should suit you perfectly. The marriage of the best bits of both the Delta Armory EAGLE™ and ETU series in the popular FREYA™ skeletonised externals makes the FREYA™ Gen.2 a beast in whatever environment it finds itself in!

Do you have the need to feel thunderous recoil? Nothing will do it quite like a Gas Blowback rifle! The WE G39C gas blowback rifle operates just like the real thing, with a fully moving bolt carrier which cycles back violently with each shot. The G39C boasts full metal construction despite being made predominantly from high-density polymer and can be field stripped in seconds just like the real rifle.

GBBRs aren't for the faint of heart as this rifle feeds from 30rnd real capacity magazines and needs to be operated like a real rifle; requiring cocking to load the first round. When the mag runs dry, the bolt will lock back which is your cue to reload and hit the bolt release catch inside the trigger guard. No AEG can match the realism provided by a GBBR, and with its reputation for great performance and impressive cool-down resistance, the WE G39C is the perfect tool for the experienced Airsofter who likes a challenge. Consider this a GBB pistol on steroids!

A super compact Airsoft Single Shot 6mm BB Shotgun, based on the M870 designed for Breaching through doors and going into buildings.

An M203 Grenade Launcher replica which fires 40mm MOSCART Grenades and attaches to rifles either by a 20mm rail or direct to an M4/M16 outer barrel.