All Novritsch

If you're treating yourself to the super speedy Novritsch Modular Chest Rig 1.0, you'll need some of these! The Novritsch Modular Chest Rig Inserts are available in 3 different flavours, suitable for all of the most common Airsoft magazines out there. 

The M4/AR variant holds 3 M4/AR-15 magazines, the SMG variant holds 5 SMG or pistol magazines and the DMR version holds 3 7.62 DMR magazines but can also take AK and AR36 magazines. Installing the inserts is as simple as placing them inside with the open end facing upwards and affixing the velcro on the inserts to the velcro inside the Modular Chest Rig 1.0. A side effect of this is that the inserts can be quickly swapped in seconds, meaning if you're bored playing with your DMR you can switch it out for an SMG and swap mag inserts without even taking the rig off!

The Modular Chest Rig Insert is supplied as a single insert, so if you need to fill both compartments in the Modular Chest Rig 1.0 chassis make sure you order 2! 

If you're treating yourself to the super speedy Novritsch Modular Chest Rig 1.0, you'll need some of these! The Novritsch Modular Chest Rig Inserts are available in 3 different flavours, suitable for all of the most common Airsoft magazines out there. 

The M4/AR variant holds 3 M4/AR-15 magazines, the SMG variant holds 5 SMG or pistol magazines and the DMR version holds 3 7.62 DMR magazines but can also take AK and AR36 magazines. Installing the inserts is as simple as placing them inside with the open end facing upwards and affixing the velcro on the inserts to the velcro inside the Modular Chest Rig 1.0. A side effect of this is that the inserts can be quickly swapped in seconds, meaning if you're bored playing with your DMR you can switch it out for an SMG and swap mag inserts without even taking the rig off!

The Modular Chest Rig Insert is supplied as a single insert, so if you need to fill both compartments in the Modular Chest Rig 1.0 chassis make sure you order 2! 

If you're treating yourself to the super speedy Novritsch Modular Chest Rig 1.0, you'll need some of these! The Novritsch Modular Chest Rig Inserts are available in 3 different flavours, suitable for all of the most common Airsoft magazines out there. 

The M4/AR variant holds 3 M4/AR-15 magazines, the SMG variant holds 5 SMG or pistol magazines and the DMR version holds 3 7.62 DMR magazines but can also take AK and AR36 magazines. Installing the inserts is as simple as placing them inside with the open end facing upwards and affixing the velcro on the inserts to the velcro inside the Modular Chest Rig 1.0. A side effect of this is that the inserts can be quickly swapped in seconds, meaning if you're bored playing with your DMR you can switch it out for an SMG and swap mag inserts without even taking the rig off!

The Modular Chest Rig Insert is supplied as a single insert, so if you need to fill both compartments in the Modular Chest Rig 1.0 chassis make sure you order 2! 

The Novritsch IFAK Pouch is the perfect MOLLE-mounted pouch to store a first aid kit or similar gear, allowing for fast deployment in the event of an emergency. It can be mounted vertically or horizontally thanks to the Molle Strip Clips. It comes with a black medic cross patch to attach to the Velcro surface on the front of the pouch. However, this patch can be taken off to reveal a laser-cut red cross in the form of the Novritsch Logo that is embedded into the Velcro surface.

The first aid kit is attached to an insert within the pouch that can be pulled out in a matter of seconds, this quick access is so you can provide a quick response if the worst situation comes true on the battlefield. The insert is fastened into the main pouch via a Velcro flap cover. The pouch can accommodate any 15x10x5 cm first aid kit.

The Novritsch IFAK Pouch is the perfect MOLLE-mounted pouch to store a first aid kit or similar gear, allowing for fast deployment in the event of an emergency. It can be mounted vertically or horizontally thanks to the Molle Strip Clips. It comes with a black medic cross patch to attach to the Velcro surface on the front of the pouch. However, this patch can be taken off to reveal a laser-cut red cross in the form of the Novritsch Logo that is embedded into the Velcro surface.

The first aid kit is attached to an insert within the pouch that can be pulled out in a matter of seconds, this quick access is so you can provide a quick response if the worst situation comes true on the battlefield. The insert is fastened into the main pouch via a Velcro flap cover. The pouch can accommodate any 15x10x5 cm first aid kit.

The Novritsch IFAK Pouch is the perfect MOLLE-mounted pouch to store a first aid kit or similar gear, allowing for fast deployment in the event of an emergency. It can be mounted vertically or horizontally thanks to the Molle Strip Clips. It comes with a black medic cross patch to attach to the Velcro surface on the front of the pouch. However, this patch can be taken off to reveal a laser-cut red cross in the form of the Novritsch Logo that is embedded into the Velcro surface.

The first aid kit is attached to an insert within the pouch that can be pulled out in a matter of seconds, this quick access is so you can provide a quick response if the worst situation comes true on the battlefield. The insert is fastened into the main pouch via a Velcro flap cover. The pouch can accommodate any 15x10x5 cm first aid kit.

The Novritsch IFAK Pouch is the perfect MOLLE-mounted pouch to store a first aid kit or similar gear, allowing for fast deployment in the event of an emergency. It can be mounted vertically or horizontally thanks to the Molle Strip Clips. It comes with a black medic cross patch to attach to the Velcro surface on the front of the pouch. However, this patch can be taken off to reveal a laser-cut red cross in the form of the Novritsch Logo that is embedded into the Velcro surface.

The first aid kit is attached to an insert within the pouch that can be pulled out in a matter of seconds, this quick access is so you can provide a quick response if the worst situation comes true on the battlefield. The insert is fastened into the main pouch via a Velcro flap cover. The pouch can accommodate any 15x10x5 cm first aid kit.

The Novritsch IFAK Pouch is the perfect MOLLE-mounted pouch to store a first aid kit or similar gear, allowing for fast deployment in the event of an emergency. It can be mounted vertically or horizontally thanks to the Molle Strip Clips. It comes with a black medic cross patch to attach to the Velcro surface on the front of the pouch. However, this patch can be taken off to reveal a laser-cut red cross in the form of the Novritsch Logo that is embedded into the Velcro surface.

The first aid kit is attached to an insert within the pouch that can be pulled out in a matter of seconds, this quick access is so you can provide a quick response if the worst situation comes true on the battlefield. The insert is fastened into the main pouch via a Velcro flap cover. The pouch can accommodate any 15x10x5 cm first aid kit.

The Novritsch IFAK Pouch is the perfect MOLLE-mounted pouch to store a first aid kit or similar gear, allowing for fast deployment in the event of an emergency. It can be mounted vertically or horizontally thanks to the Molle Strip Clips. It comes with a black medic cross patch to attach to the Velcro surface on the front of the pouch. However, this patch can be taken off to reveal a laser-cut red cross in the form of the Novritsch Logo that is embedded into the Velcro surface.

The first aid kit is attached to an insert within the pouch that can be pulled out in a matter of seconds, this quick access is so you can provide a quick response if the worst situation comes true on the battlefield. The insert is fastened into the main pouch via a Velcro flap cover. The pouch can accommodate any 15x10x5 cm first aid kit.

If you're running an upgraded Sniper Rifle or one of Novritsch's fantastic pre-upgraded platforms, the Novritsch 0.40g Sniper BBs will help you get the most out of your setup. Supplied in a resealable bottle of 530 rounds with an O-ring sealed top, even the bottle of these BBs is designed to give you the best possible accuracy by keeping dirt and debris out and your BBs clean and ready (even as you are clean and ready!). 

Ideal for platforms with upgraded HOP-up parts like the SSG96, SSG10 series and SSR63 A3, Novritsch's BBs boast tight tolerances and a finely polished surface for maximum accuracy. Feed your sniper rifle with the ammo it deserves!

If you want your SSG24 to be more sneaky or you want to light the enemy up with a tracer unit, this thread adapter will do the trick! The 14mm CCW Suppressor Thread Adapter for SSG24 is constructed from CNC machined aluminium and replaces the front barrel cap on the Novritsch SSG24, providing 14mm CCW male barrel threads. These are the most common barrel threads used on Airsoft rifles, so with this adapter installed you have all the options in the world when it comes to customising your SSG24 and making it truly yours.

If you want to sharpen your skills, whether for skirmishing or competition, the Novritsch Bluetooth Timer Target is what you need to shoot at your best. When hit, this steel target produces a satisfying ring, but that isn't its only perk! Its Bluetooth connectivity means you can track your split times and play 3 different game modes using your iOS or Android device. 

With a 40m Bluetooth range, the Bluetooth Timer Target allows you to run long-range courses of fire or practice your snap shooting skills up close. An LED indicator light on the front tells you when the target has been hit, its current status and warns you when the internal rechargeable battery is running low. If you want to be the sharpest shooter on the field, the Novritsch Bluetooth Timer Target will get you there!

If you need more mags for your SSR63 A1 to keep up with that devastating rate of fire, here you go! The Novritsch 150rnd Mid-cap Magazine for SSR63 A1/AR36 AEGs is compatible with the A1 variant of the SSR63 platform and also fits in other AR36 AEGs provided they have the standard magazine well and not the AR mag conversion.

Like any standard AEG mid-cap, this mag is loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod. Also present on this magazine are the unique AR36 magazine linkage lugs which allow several magazines to be linked together for faster reloads.

If you're moving away from standard scope rings in favour of something more modern and lightweight, the Novritsch One-Piece 20mm Picatinny Scope Mount; 25mm Tube is ideal. This single-piece scope mount follows modern trends, combining the front and rear scope ring for a more robust combination setup which is easier to mount as a bonus. 

Its aluminium construction keeps the weight of the One-Piece 20mm Picatinny Scope Mount to a minuscule 138 grams and its raised optical centreline means your scope sits slightly higher than usual, ideal for those who like to keep their knashers protected behind a face mask while skirmishing. Each ring also includes a single slot of 20mm Picatinny rail, ideal for micro red dot sights, Runcam/action cameras or whatever other equipment you need to complete the mission at hand!

Compatibility-wise, this mount should fit any LPVO or Rifle Scope with a 25mm monotube but will not fit 30mm monotube optics. If you want a more advanced scope mounting solution for your primary or have trouble looking through your scope due to your face-pro choice, the Novritsch One-Piece 20mm Picatinny Scope Mount; 25mm Tube is what you need!

Suppose you need something to support the weight of your hefty sniper rifle, the Novritsch Split M-LOK Bipod is exactly what you need! Platforms like the Novritsch SSG10 A2 feature M-LOK rail systems on either side of their handguard so mounting a bipod can sometimes be tricksy. The split design is the perfect remedy, it allows you to mount a single bipod leg on either side of your platform, providing support on even the heftiest of M-LOK rail system platforms!

Turn your boring SSG10 or VSR-10 sniper rifle into a futuristic-looking rifle from a galaxy far far away! The Novritsch SSG10 A3 Stock has a lightweight and skeletonised design, perfect for those who enjoy sniping but like to get a bit more stuck in and charge around the battlefield. There are a lot of practical features that come included with this stock, the stock is foldable for easier transport, the cheek rest is fully adjustable and the handguard features M-LOK rail sections on either side.

You will have to install this stock yourself, only attempt if you are confident in your ability and understanding. Do not attempt if you are unsure as it can lead to damage.

This stock creates a menacing image for your SSG10 or VSR-10 platform, with the Novritsch SSG10 A3 Stock you are sure to out-manoeuvre and out-class all those who dare to test you!

If you love your SSX23 and would hate to see it out of action, grab the Novritsch Nozzle Assembly Set for SSX23 NBB and keep it in the parts stash just in case! This nozzle assembly is a replacement original part designed for the SSX23 N-BB pistol from Novritsch and is constructed from a high-density polymer. Nozzles are a known failure point for pistols and as reliable as the SSX23 is, it's always wise to have spare parts so you can keep your beast of a pistol up and running!

If you're running an upgraded Sniper Rifle or one of Novritsch's fantastic pre-upgraded platforms, the Novritsch 0.40g 6mm Sniper BIO BBs will help you get the most out of your setup. Supplied in a speedloader-friendly resealable bottle of 530 rounds with an O-ring sealed top, even the bottle of these BBs is designed to give you the best possible accuracy by keeping dirt and debris out and your BBs clean and ready (even as you are clean and ready!). 

Ideal for platforms with upgraded HOP-up parts like the SSG96, SSG10 series and SSR63 A3, Novritsch's BBs boast tight tolerances and a finely polished surface for maximum accuracy. These are the biodegradable version, perfect for strict skirmish sites and guilt-free sniping. Feed your sniper rifle with the ammo it deserves!

The Air Brake Pin blocks the cylinder head before impact producing an air "cushion" for the piston. As a result, the impact is dampened and the gun is more quiet. Included are 4 different lengths: 20 mm, 23 mm, 26 mm and 29 mm. The longer the length, the more of an air cushion resulting in a quieter shot, but it also reduces the FPS due to more of the air in the piston being used to dampen the impact. AirBrake pins are installed onto the piston head to make shooting the SSG-10 rifles quieter. They are compatible with upgrade parts such as the Novritsch SSG10 Weight Adjustable Piston. 

This is an advanced technical part, it is only recommended if you are confident in your upgrading abilities. 

If you're decked out in Novritsch gear, you'll need a helmet cover to complete the look! The Novritsch Tactical Helmet Cover for FAST High-Cut is available in several camo options, including Novritsch's own Kreuzotter and is designed to fit any FAST High-Cut helmet or clone, including the Novritsch Tactical Helmet. 

On each flank, the top and rear we have Velcro panels for your essential morale and I.D patches, complete with the Novritsch logo embroidered in. Loops are also present at the front and rear on each side, allowing you to keep your cables and hoses neat if you run an anti-fog unit or power bank on your lid. Bungee cord is also present on the top, giving you the option of adding natural foliage to your lid to blend more effectively with your surroundings in a woodland environment. If you're running a FAST High-Cut helmet or replica, the Novritsch Tactical Helmet Cover for FAST High-Cut is an ideal way to style it up!

If you're decked out in Novritsch gear, you'll need a helmet cover to complete the look! The Novritsch Tactical Helmet Cover for FAST High-Cut is available in several camo options, including Novritsch's own Kreuzotter and is designed to fit any FAST High-Cut helmet or clone, including the Novritsch Tactical Helmet. 

On each flank, the top and rear we have Velcro panels for your essential morale and I.D patches, complete with the Novritsch logo embroidered in. Loops are also present at the front and rear on each side, allowing you to keep your cables and hoses neat if you run an anti-fog unit or power bank on your lid. Bungee cord is also present on the top, giving you the option of adding natural foliage to your lid to blend more effectively with your surroundings in a woodland environment. If you're running a FAST High-Cut helmet or replica, the Novritsch Tactical Helmet Cover for FAST High-Cut is an ideal way to style it up!

If you're decked out in Novritsch gear, you'll need a helmet cover to complete the look! The Novritsch Tactical Helmet Cover for FAST High-Cut is available in several camo options, including Novritsch's own Kreuzotter and is designed to fit any FAST High-Cut helmet or clone, including the Novritsch Tactical Helmet. 

On each flank, the top and rear we have Velcro panels for your essential morale and I.D patches, complete with the Novritsch logo embroidered in. Loops are also present at the front and rear on each side, allowing you to keep your cables and hoses neat if you run an anti-fog unit or power bank on your lid. Bungee cord is also present on the top, giving you the option of adding natural foliage to your lid to blend more effectively with your surroundings in a woodland environment. If you're running a FAST High-Cut helmet or replica, the Novritsch Tactical Helmet Cover for FAST High-Cut is an ideal way to style it up!

If you're decked out in Novritsch gear, you'll need a helmet cover to complete the look! The Novritsch Tactical Helmet Cover for FAST High-Cut is available in several camo options, including Novritsch's own Kreuzotter and is designed to fit any FAST High-Cut helmet or clone, including the Novritsch Tactical Helmet. 

On each flank, the top and rear we have Velcro panels for your essential morale and I.D patches, complete with the Novritsch logo embroidered in. Loops are also present at the front and rear on each side, allowing you to keep your cables and hoses neat if you run an anti-fog unit or power bank on your lid. Bungee cord is also present on the top, giving you the option of adding natural foliage to your lid to blend more effectively with your surroundings in a woodland environment. If you're running a FAST High-Cut helmet or replica, the Novritsch Tactical Helmet Cover for FAST High-Cut is an ideal way to style it up!

If you're decked out in Novritsch gear, you'll need a helmet cover to complete the look! The Novritsch Tactical Helmet Cover for FAST High-Cut is available in several camo options, including Novritsch's own Kreuzotter and is designed to fit any FAST High-Cut helmet or clone, including the Novritsch Tactical Helmet. 

On each flank, the top and rear we have Velcro panels for your essential morale and I.D patches, complete with the Novritsch logo embroidered in. Loops are also present at the front and rear on each side, allowing you to keep your cables and hoses neat if you run an anti-fog unit or power bank on your lid. Bungee cord is also present on the top, giving you the option of adding natural foliage to your lid to blend more effectively with your surroundings in a woodland environment. If you're running a FAST High-Cut helmet or replica, the Novritsch Tactical Helmet Cover for FAST High-Cut is an ideal way to style it up!

The Novritsch 32rnd Gas Magazine is designed for Novritsch SSX23 or MK23 Pistols, but it is compatible with non-blowback pistols from Marui, KJW, and ASG. It is constructed from alloy, giving it a nice weighted feel when reloading. The magazine holds green gas which is refilled at the bottom. The BBs are loaded into the magazine by pulling down the spring tab and filling the BB chamber with a speedloader. This mag has a 1-stage valve and a hard rubber gas router for a snappy trigger return.

Being a product by Novritsch, we know that high quality is a given and satisfaction can be guaranteed. Pick up a Novritsch 32rnd Gas Magazine for SSX23/303 as a spare mag for one of your sidearms, so you can have that extra clip of ammo when you need it most.

If you're searching for a high-quality rifle scope to top off your sniper rifle, the Novritsch 3-9x50 Rifle Scope Mk2 w/Scope Rings is a fantastic choice. Constructed with an alloy monotube and glass lenses, this scope comes ready to mount, with a pair of 25mm scope rings for 20mm Picatinny rails included in the box, along with a microfibre cleaning cloth. 

As its name might suggest, 3-9x50 Rifle Scope Mk2 w/Scope Rings offers variable magnification between 3x and 9x, ideal for both spotting your target and engaging at Airsoft ranges. The objective lens boasts a whopping 50mm diameter, meaning you get a wider field of view than most comparable rifle scopes for an easier time tracking moving targets and the ability to see more around your crosshair. 

Windage, elevation, illumination and focus are all adjustable, allowing you to set the scope up precisely and tune the red or green illuminated reticle for your current ambient lighting conditions. If you're a sniper with your sights set on a beast of a rifle scope, the Novritsch 3-9x50 Rifle Scope Mk2 w/Scope Rings suits your needs perfectly!

If you want to run your SSP18 or EU-series GBB on HPA, the Novritsch HPA SMG-5 Magazine Adapter for EU Series GBB Pistols; Gen 2 is the easiest way to do it. This adapter is pre-built using a zinc alloy magazine body and fibre-reinforced nylon polymer adapter and is outfitted for US Spec HPA lines by default. This adapter is designed to feed from curved MP5/SMG-5 AEG mid-cap magazines and HPA from an external tank (not included), increasing capacity considerably and practically eliminating FPS fluctuation due to the "cooldown" effect. 

The adapter is pre-assembled, meaning you don't need to mess around putting it together or run the risk of doing it wrong and causing injury. Naturally, you'll need an HPA bottle, air line and regulator to use this adapter and the fitting is US Spec, meaning only US Spec air lines will fit. If you're running your SSP18 in the Novritsch Minimalist Carbine Kit or as a primary, the Novritsch HPA SMG-5 Magazine Adapter for EU Series GBB Pistols; Gen 2 will give you the rapid-fire performance and capacity you need to stay ahead!

If you're searching for your first Airsoft sidearm and want it to be a real killer, the Novritsch SSP1 CO2 Hi-Capa GBB Pistol; Pre Two-Tone is exactly that. Boasting full metal construction with the unique Novritsch external aesthetic, the SSP1 is also thoroughly pre-upgraded on the inside, giving it a longer lifespan and significantly improved performance when compared to the average GBB pistol. 

Inside, you'll find a 6.03mm tightbore inner barrel paired with the impressive Novritsch Purple HOP-up bucking housed in an alloy HOP-up unit, providing exceptional accuracy and range for a pistol and allowing heavier BBs to be used for further long range performance. 

All of the hammer group components are constructed from steel, giving you a massive reliability advantage and seeing to known weak points in other GBB sidearms. The loading nozzle is reinforced in key places to extend the SSP1's lifespan and the magazine has been enhanced with the Novritsch gas route bucking, providing a tighter seal with the nozzle for improvements in shot-to-shot consistency and reduced gas wastage. 

Being finished in Pre-two tone blue, this version of the SSP1 is ideal for those who don't yet have a UKARA membership or other VCRA defence, or those who appreciate an eye-catching sidearm with a stylish look. In its CO2-powered form, the SSP1 is a bit too hot FPS-wise for skirmish use during the summer, but throw a Novritsch 30rnd Magazine for Hi-Capa GBB Pistols; V3 in there and you'll get around 320 FPS +/- 10% on 0.2g BBs, ideal for skirmishing at any site in the country. Keep your CO2 mag handy though, it will really come into its own during the winter months when everyone else's sidearm is gassing out! 

The Novritsch Holster MOLLE Mount Gen2 is an adaptive mount for your pistol holsters. It allows you to attach your holster to any MOLLE surface, such as the ones located on chest rigs and tactical belts. This is a great way to attach your holster to your gear as it is extremely secure, very versatile and easily adjustable.

The Novritsch Holster MOLLE Mount Gen2 is an adaptive mount for your pistol holsters. It allows you to attach your holster to any MOLLE surface, such as the ones located on chest rigs and tactical belts. This is a great way to attach your holster to your gear as it is extremely secure, very versatile and easily adjustable.