Airsoft Under £25

The No. 318 Scorpio Hard Case is a compact sized Hard Case made from Polypropylene (PP) + Glass Fibre Material, with a stackable design that makes them very convenient to store in bulk. Whether you need to carry delicate equipment on your person or you want to store them with the confidence that they're protected from the elements, with plenty of third-party certifications to back it up, then the PARRA series Hard Cases are just what you need.

Looking for mags for your M14 battle rifle? Jing Gong has just what you need! The 400rnd High-capacity magazine is designed for Tokyo Marui style M14 AEG rifles such as the Jing Gong JG1401 and CYMA CM.032 but is not compatible with G&G M14 AEGs.

This mag holds an impressive 400 6mm BBs and is a wheel wound high-capacity design with a winding wheel located on the baseplate. The mag can be loaded through its fill window on the top rear of the magazine body which is easy to open by hand with the help of a fingernail. This magazine has a steel shell to give a realistic feel, and has reinforcement grooves in either side for that classic M14 cold war battle rifle look.

NUPROL's latest environmentally friendly offering into the Airsoft Market with newly designed 0.20g BBs made to be offer consistent performance and great accuracy, which Degrade and Breakdown over time after use. 

If you're building a beast of a gearbox, the Lonex Aluminium Cylinder Head for V2/3 Gearbox belongs inside! This CNC aluminium cylinder head is compatible with version 2 and version 3 gearboxes and is equipped with a pair of O-rings around its circumference intended to close the gap between the cylinder and head for maximum air efficiency.

Its robust CNC aluminium construction pairs perfectly with the shock-absorbing rubber pad pre-installed on the rear of the cylinder head, reducing impact stress on the gearbox shell, piston head and cylinder head for a longer lifespan. If you're upgrading your V2 or V3 gearbox or working on a scratch build, the Lonex Aluminium Cylinder Head for V2/3 Gearbox is a fantastic choice!

If you're working on a low-cost, low-weight build, the Delta Armory Polymer 20mm Picatinny RAS for M4/AR-15 Delta Rings is a fine choice. Priced at less than a Big Mac meal but packaged with a pair of rail covers, this handguard is constructed from high density polymer, tipping the scales at a mere 180g!

Like the real KAC RAS it is based on, the Delta Armory RAS boasts 20mm Picatinny rails at 3, 6, 9 and 12 o'clock and is a two-part design with a separate upper and lower handguard. This means that once installed you can remove the lower handguard without tools, either for a battery change or to mount an M203 launcher. The included rail covers are designed to protect your hands and keep your rails crisp and in-spec but can be removed by holding the metal tab at the end down and sliding them off. 

Compatibility-wise, this handguard is designed to be paired with a Delta Ring and Handguard Cap so can easily be installed on M4A1, CQBR, XM177 and other classic M4/AR-15 configurations with the same procedure as the original ribbed handguards.

Those of you need some big mags for your big boy AR, the SR25, this will do the job! The NUPROL 550rnd W-Mag High-cap for SR25 is styled after a famous polymer LR magazine and is a wheel-wound high-cap. The magazine is filled using the fill window at the top of the magazine body and is tensioned via the winding wheel on the baseplate.

This magazine is compatible with the Classic Army pattern of SR25, meaning it should work in the A&K and CYMA SR25 rifles as well, but will not fit ARES/Secutor or G&G patterns. The style of this magazine is a great fit for any modern SR25 platform and has a dot textured surface for enhanced grip and strength, as well as a see-through panel on either side to help keep track of your ammo at a glance.

Save yourself time on the skirmish field with the Novritsch Leaf Camo! These artificial plastic leaves are the quickest way to disappear into the wildlife, pin the leaves anywhere on your ghillie suit using the pins included in the package and you're good to go. Their 3D effect is fantastic for breaking up your outline during skirmishes so you can avoid detection.

There are multiple styles to choose from, all of which have been colour-corrected by ex-military experts in Austria. They are designed to be compatible with mesh-based ghillie suits, this includes ones not branded by Novritsch. The plastic leaves are both UV and water-resistant, no matter what the weather might throw at you, your 3D leaves will still keep you effectively camouflaged.

The LC1 Camo Leaf roughly depicts a vine leaf and is perfect for blending in with the undergrowth during a skirmish.

Save yourself time on the skirmish field with the Novritsch Leaf Camo! These artificial plastic leaves are the quickest way to disappear into the wildlife, pin the leaves anywhere on your ghillie suit using the pins included in the package and you're good to go. Their 3D effect is fantastic for breaking up your outline during skirmishes so you can avoid detection.

There are multiple styles to choose from, all of which have been colour-corrected by ex-military experts in Austria. They are designed to be compatible with mesh-based ghillie suits, this includes ones not branded by Novritsch. The plastic leaves are both UV and water-resistant, no matter what the weather might throw at you, your 3D leaves will still keep you effectively camouflaged.

The LC1 Camo Leaf roughly depicts a vine leaf and is perfect for blending in with the undergrowth during a skirmish.

Save yourself time on the skirmish field with the Novritsch Leaf Camo! These artificial plastic leaves are the quickest way to disappear into the wildlife, pin the leaves anywhere on your ghillie suit using the pins included in the package and you're good to go. Their 3D effect is fantastic for breaking up your outline during skirmishes so you can avoid detection.

There are multiple styles to choose from, all of which have been colour-corrected by ex-military experts in Austria. They are designed to be compatible with mesh-based ghillie suits, this includes ones not branded by Novritsch. The plastic leaves are both UV and water-resistant, no matter what the weather might throw at you, your 3D leaves will still keep you effectively camouflaged.

The LC1 Camo Leaf roughly depicts a vine leaf and is perfect for blending in with the undergrowth during a skirmish.

Save yourself time on the skirmish field with the Novritsch Leaf Camo! These artificial plastic leaves are the quickest way to disappear into the wildlife, pin the leaves anywhere on your ghillie suit using the pins included in the package and you're good to go. Their 3D effect is fantastic for breaking up your outline during skirmishes so you can avoid detection.

There are multiple styles to choose from, all of which have been colour-corrected by ex-military experts in Austria. They are designed to be compatible with mesh-based ghillie suits, this includes ones not branded by Novritsch. The plastic leaves are both UV and water-resistant, no matter what the weather might throw at you, your 3D leaves will still keep you effectively camouflaged.

The LC1 Camo Leaf roughly depicts a vine leaf and is perfect for blending in with the undergrowth during a skirmish.

A gas grenade (AKA Moscart) for Airsoft punches out 90 rounds per shot. A new and unique design capable of firing all 90 rounds with sheer force. Each shell can be loaded in under 2 minutes with no use of a speed loader. Excellent for CQB arenas and close quarter battles outdoors.

Keep your belt up and prevent your pants from falling down mid fire-fight. 

A mountable RIS / RAS rail raiser which allows the user to increase the height at which their Sights and attachments sit to bring them to the correct height. 

An extra Nuprol N96 magazine for the sniper who wants to stay in play for longer. Add a couple of these to your rig and you can hide in a bush for hours!

If you're seeking maximum HOP-up performance and are committed to using heavy BBs, the Maple Leaf 2023 MR HOP Bucking for VSR/GBB belongs in your build. The MR HOP-up Bucking offers a wider and longer “R-HOP” style contact patch for increased HOP-up effect and extended range with heavy BBs. The MR HOP also uses a shield-shaped groove around the contact patch to allow it to stretch and add to the strong HOP-up effect along with an air seal improving C-ring which ensures the bucking is firmly fitted to the barrel and unable to slip or rotate.

MR stands for “Maximum Range”, a design based on home-brewed R-HOP buckings, intended to prioritise range over grouping size and is best used paired with a Maple Leaf OMEGA or OHM HOP-up nub. Compatibility-wise, this version of the MR HOP is designed for unbridged VSR-10 and GBB pistol inner barrels but as always, a certain amount of expertise and tuning may be required to install it, though it will be far less work than the R-HOPs of old!

If you're seeking maximum HOP-up performance and are committed to using heavy BBs, the Maple Leaf 2023 MR HOP Bucking for VSR/GBB belongs in your build. The MR HOP-up Bucking offers a wider and longer “R-HOP” style contact patch for increased HOP-up effect and extended range with heavy BBs. The MR HOP also uses a shield-shaped groove around the contact patch to allow it to stretch and add to the strong HOP-up effect along with an air seal improving C-ring which ensures the bucking is firmly fitted to the barrel and unable to slip or rotate.

MR stands for “Maximum Range”, a design based on home-brewed R-HOP buckings, intended to prioritise range over grouping size and is best used paired with a Maple Leaf OMEGA or OHM HOP-up nub. Compatibility-wise, this version of the MR HOP is designed for unbridged VSR-10 and GBB pistol inner barrels but as always, a certain amount of expertise and tuning may be required to install it, though it will be far less work than the R-HOPs of old!

If you're seeking maximum HOP-up performance and are committed to using heavy BBs, the Maple Leaf 2023 MR HOP Bucking for VSR/GBB belongs in your build. The MR HOP-up Bucking offers a wider and longer “R-HOP” style contact patch for increased HOP-up effect and extended range with heavy BBs. The MR HOP also uses a shield-shaped groove around the contact patch to allow it to stretch and add to the strong HOP-up effect along with an air seal improving C-ring which ensures the bucking is firmly fitted to the barrel and unable to slip or rotate.

MR stands for “Maximum Range”, a design based on home-brewed R-HOP buckings, intended to prioritise range over grouping size and is best used paired with a Maple Leaf OMEGA or OHM HOP-up nub. Compatibility-wise, this version of the MR HOP is designed for unbridged VSR-10 and GBB pistol inner barrels but as always, a certain amount of expertise and tuning may be required to install it, though it will be far less work than the R-HOPs of old!

If you're seeking maximum HOP-up performance and are committed to using heavy BBs, the Maple Leaf 2023 MR HOP Bucking for VSR/GBB belongs in your build. The MR HOP-up Bucking offers a wider and longer “R-HOP” style contact patch for increased HOP-up effect and extended range with heavy BBs. The MR HOP also uses a shield-shaped groove around the contact patch to allow it to stretch and add to the strong HOP-up effect along with an air seal improving C-ring which ensures the bucking is firmly fitted to the barrel and unable to slip or rotate.

MR stands for “Maximum Range”, a design based on home-brewed R-HOP buckings, intended to prioritise range over grouping size and is best used paired with a Maple Leaf OMEGA or OHM HOP-up nub. Compatibility-wise, this version of the MR HOP is designed for unbridged VSR-10 and GBB pistol inner barrels but as always, a certain amount of expertise and tuning may be required to install it, though it will be far less work than the R-HOPs of old!

A Mid-Cap Magazine for compatible AK Platform Airsoft Electric Guns, which holds a total of 130rnds, but can be switched to a realistic capacity of 30rnds.

An Aluminium constructed Rail Mount for AKS-74U Platform Airsoft Replicas, which will install to the Rear Ironsight Block and provide a 20mm RIS/RAS Rail for installing a Red Dot Sight. If you own an AKS-74U and you want to start decking it out with bells and whistles, then this is an ideal place to start.

If you run a front-wired AEG with limited battery space, storing your battery in a PEQ-15 battery box could be the solution! This 7.4v 1000mAh 30C LiPo battery from Electro River is designed to fit into cramped spaces and is the perfect size for use in a PEQ-15 battery box. The battery measures  6.4 x 1.2 x 3.3cm approximately and the wire length between the cell group and connector is approximately 9.5cm.

The compact size of this battery makes it great for both Airsoft and any other electronics projects you have on the go, providing plenty of juice in a smaller form factor. The continuous discharge rate of this battery is 30C and its peak is 60C, giving you a nice snappy response without overdoing things!

Those of you wanting to mount an optic or torch closer to your handguard without mounting to the handguard itself, you have found your answer. Attached to M-LOK system, the mount is offset by 45 degrees, meaning the rail is closer to the barrel, and gives you additional flexibility on where you want your rail and subsequent light/optics etc. mounting. An advantage of this mounting method is that it makes your device easier to reach and use, as well as limiting obstruction to other accessories.

The rail is a 20mm Picatinny type, measuring roughly 2.5 inches and is attached to M-LOK system using the included screws, nuts and Allen key. Featuring aluminium alloy construction, the mount is both tough and lightweight, which will complement any loadout.

Sick and tired of having to draw your radio from its pouch to adjust the volume, or kill it entirely to save your ears from the voice of an annoying teammate? The Open-Top MOLLE Radio Pouch from 8Fields Tactical allows you to securely store your radio on your rig with full access to any controls on the top, and controls on either side.

This pouch is also slightly adjustable thanks to a bungee cord running through, which can be tightened to provide more retention for a smaller radio handset, or loosened to allow for larger radios to be used. This pouch attaches to MOLLE loops and also has MOLLE loops on its front panel, allowing you to stack pouches on top of this one if needed. Your radio is held securely in the pouch using a bungee cord, which can be pulled to either side if you need to remove the radio from the pouch.

Sick and tired of having to draw your radio from its pouch to adjust the volume, or kill it entirely to save your ears from the voice of an annoying teammate? The Open-Top MOLLE Radio Pouch from 8Fields Tactical allows you to securely store your radio on your rig with full access to any controls on the top, and controls on either side.

This pouch is also slightly adjustable thanks to a bungee cord running through, which can be tightened to provide more retention for a smaller radio handset, or loosened to allow for larger radios to be used. This pouch attaches to MOLLE loops and also has MOLLE loops on its front panel, allowing you to stack pouches on top of this one if needed. Your radio is held securely in the pouch using a bungee cord, which can be pulled to either side if you need to remove the radio from the pouch.

Looking for Grease Gun mags? The Snow Wolf 520rnd High-Cap Magazine For M3/M3A1 Grease Gun AEG is authentically built with a steel shell and is a wheel wound high cap magazine which holds 520 BBs. The magazine can be loaded through the fill window at the top of the magazine body by pouring BBs straight in and the winding wheel is located on the baseplate and needs to be wound up to tension the mag.

This magazine is compatible with the Snow Wolf M3 and M3A1 Grease Gun AEGs but may not be compatible with other brands.

If your belt and rig are full or you prefer a leg-mounted load-bearing solution, this setup should suit you perfectly. The CS Drop Leg Holster Platform with Mag Carriers is designed for 1911 GBB pistols and includes a Serpa-style 1911 holster, two 1911 mag carriers and a wide polymer platform which mounts to your leg and belt. 

The platform attaches to any 2-inch or slimmer belt via a pair of quick detach buckles with rotation built-in, preventing the usual restrictive nature of drop leg platforms from slowing you down. The leg straps are nice and thick with elastic sections for comfort and rubber woven into the straps so the platform never slips down your leg. All straps are fully adjustable and include elastic strap retainers so you can minimise dangling straps and look tidy out in the field. 

For all you AK-74 lovers that need that additional tactical edge and transition from ironsights to fully fledged optics. This mount allows users to install a 20mm RIS rail capable of mounting a wide variety of sights and scope. Whether you're using a compact AKS-74U and want a red-dot reflex sight for CQB, or are using a full length AK-74 and want to accurately aim at targets at mid range with a 4X magnified sight, this rail mount is essential.

The rail is attached to the side dovetail of your AK and constructed from tough but lightweight alloy, featuring a laser cut Swiss Arms on the side.

If you are in the process of building your own custom AEG, or you want to add a little extra speed to your existing AEG, you've come to the right place! The Specna Arms 16:1 High Speed gearset is constructed from steel using CNC machining processes and allows your gearbox to complete additional cycles per motor rotation than standard 18:1 ratio gears. This gearset is designed for the version 2 and version 3 gearbox but will work in any AEG gearbox with V2/V3 gear compatibility. These gears require disassembly of the gearbox to install, and as such, they are recommended only for advanced users.

If you're running a Novritsch Battle Belt and want to load it down, the Novritsch Harness 3.0 is what you need. Similarly designed to old-school webbing yokes, the Harness 3.0 is an ultra-modern alternative with laser-cut MOLLE loops on the rear and the uniquely stylish Novritsch aesthetic. Designed to distribute the weight of your Battle Belt more evenly and provide absolute stability, the Harness 3.0 keeps your kit stable as you move and is fully adjustable to fit almost any body type. 

The laser-cut MOLLE allows you to mount a hydration bladder or your choice of MOLLE-compatible pouches to the rear, giving you extra load-bearing capacity for long-duration ops. Naturally, the style of the MOLLE loops is a perfect match for Novritsch MOLLE pouches, belts, plate carriers and other MOLLE equipment, meaning you can build a professional-looking setup within the Novritsch ecosystem. 

The Harness 3.0 is designed to be used with the Novritsch Battle Belt 3.0 or Battle Belt 4.0, attaching via the 6 attachment points to distribute weight evenly and provide extra comfort. The Harness 3.0 also boasts a wide range of adjustment, making it suitable for skirmishers of any body type. If you miss the days of webbing or want to run a heavily laden battle belt, the Novritsch Harness 3.0 is the modern solution you need!

If you're running a Novritsch Battle Belt and want to load it down, the Novritsch Harness 3.0 is what you need. Similarly designed to old-school webbing yokes, the Harness 3.0 is an ultra-modern alternative with laser-cut MOLLE loops on the rear and the uniquely stylish Novritsch aesthetic. Designed to distribute the weight of your Battle Belt more evenly and provide absolute stability, the Harness 3.0 keeps your kit stable as you move and is fully adjustable to fit almost any body type. 

The laser-cut MOLLE allows you to mount a hydration bladder or your choice of MOLLE-compatible pouches to the rear, giving you extra load-bearing capacity for long-duration ops. Naturally, the style of the MOLLE loops is a perfect match for Novritsch MOLLE pouches, belts, plate carriers and other MOLLE equipment, meaning you can build a professional-looking setup within the Novritsch ecosystem. 

The Harness 3.0 is designed to be used with the Novritsch Battle Belt 3.0 or Battle Belt 4.0, attaching via the 6 attachment points to distribute weight evenly and provide extra comfort. The Harness 3.0 also boasts a wide range of adjustment, making it suitable for skirmishers of any body type. If you miss the days of webbing or want to run a heavily laden battle belt, the Novritsch Harness 3.0 is the modern solution you need!