Airsoft Under £25

VAPEX are well known for their high quality and high performance batteries with this one being a block form factor. The battery has a voltage of 7.4v, has a capacity of 1300mAh and a discharge rate of 30C. The battery is connected to your AEG via the Mini-Tamiya connector, not to be confused with Deans connector, however adaptors are available.

The battery's dimensions are 10x1.2x3cm with a cable length of roughly 10cm. This battery should fit AEGs with larger battery compartments such as full stock AKs and M16s, within the handguard of AR36s and front wired MP5s.

A high quality and ultra compact 7.4v Lithium Polymer Battery with 850mAh of capacity, wth a 30C discharge rating.

If you need mags to keep your Grease Gun AEG in the game, these are the ones! The Snow Wolf 130rnd Mid-Cap Magazine for SW-06 M3A1 AEG is constructed with a steel shell, polymer internals and a steel feed spring, holding 130 BBs with no battle rattle or winding wheel to worry about! 

Like other Airsoft mid-caps, this mag is loaded through the fill/feed port at the top of the magazine body using a speed loader or loading tool. Compatibility-wise, these mags are for the Snow Wolf M3 and M3A1 Grease Gun AEGs and are unlikely to work with other brands. Whether you run a WW2 loadout with a Grease Gun or a Desert Storm loadout with the same, these mags belong in your rig!

If you need biodegradable BBs for your pistol or shotgun, the 0.20g Diamond 6mm BIO BB from Delta Armory is a fantastic choice. Supplied in a resealable bag of 5000, Delta's Diamond BBs are high-grade polished 6mm BBs with tight tolerances to ensure reliable feeding and maximum accuracy potential.

A lightweight belt and leg mounted Drop Leg MOLLE Platform, allowing you to quickly and easily add more MOLLE real-estate to your Airsoft Loadout. 

This Hybrid Magazine Pouch is designed for AR/M4 Platform Magazines, is compatible with MOLLE/Buckle Up systems and offers the user either an Open Top or Closed Top configuration This allows you to the run the pouch with either a velcro flap securing the Magazines in place, or an elastic retainer for fast removal of mags.

This Hybrid Magazine Pouch is designed for AR/M4 Platform Magazines, is compatible with MOLLE/Buckle Up systems and offers the user either an Open Top or Closed Top configuration This allows you to the run the pouch with either a velcro flap securing the Magazines in place, or an elastic retainer for fast removal of mags.

This Hybrid Magazine Pouch is designed for AR/M4 Platform Magazines, is compatible with MOLLE/Buckle Up systems and offers the user either an Open Top or Closed Top configuration This allows you to the run the pouch with either a velcro flap securing the Magazines in place, or an elastic retainer for fast removal of mags.

If you are running a PEQ15 or DBAL laser unit together with an SF style scout light, we have to say that's a nice setup! With the ever-growing popularity of running accessorised Airsoft rifles, WADSN has introduced a neat enhancement to combine the controls of a PEQ15 or DBAL with a 2.5mm jack and an SF scout style tactical flashlight with the standard SF plug. No longer do you have to have three hands to proficiently control your accessories, the Tactical Augmented Dual Function Tape Switch put the controls of both an SF scout style tactical flashlight and PEQ15 or DBAL (2.5mm jack) right at your fingertips, wherever you choose to place them. This switch can be mounted to 20mm Picatinny rails with the pre-installed mount, or to M-LOK or KeyMod rails with the included mounting apparatus and the Picatinny mount removed.

A 7.4v Lithium Polymer Battery designed for use in battery compartments with limited space for a thin, but long battery.

The A01 Silencer Adapter is intended to be used on pistols with an 11mm clockwise female threaded outer barrel, such as WE pistols. When installed, the adapter provides the common 14mm CCW male thread, allowing the majority of muzzle devices to be added. The adapter is constructed from stainless steel, and is available in black, gold or silver finishes.

If you need slim 7.4V crane stock LiPo for your crane stock or handguard battery compartment, the VP Racing 7.4V 1000mAh 20c LiPo Crane Stock Battery should do the trick. This 7.4V 2S LiPo stick battery is fitted with a Deans battery connector and is comprised of 2 cells, each of which measures 11 x 1.5 x 0.5 cm. The wire length between the cells and connector is approximately 10cm, giving you a bit of flexibility to ensure the battery is installed properly. As always, we recommend measuring thoroughly to ensure it fits before ordering!

Two Point Bungee sling designed to hold your weapon when not in use, but also to take force from the drop of your weapon whilst quickly transitioning to a secondary weapon.

Two Point Bungee sling designed to hold your weapon when not in use, but also to take force from the drop of your weapon whilst quickly transitioning to a secondary weapon.

A Universal Retention Holster that is constructed from a tough Polymer and features a Locking Retention Design that will hold your Pistol securely in place until you want to draw it. The Holster is hugely compatible with a large range of Airsoft Pistols, fitting and working with over eighty models of Gas Blowback Sidearms. If you own lots of Pistols and want one Holster to rule them all... then the Amomax Per-Fit Universal Holster (for 80+ Pistols) is exactly what you were looking for. This model of the Per-fit is for left-handed users and is designed to be mounted on the left hip of the user. 

If you are looking for tracer BBs in heavier weights to maximise your effective range, NUPROL have what you need! The RZR 0.28g Precision Tracer BB has the same ultra-tight +/- 0.01mm tolerances as NUPROL's standard BBs but are tracer BBs which will glow when fired through an Airsoft tracer unit, helping you instinct aim in close quarters and guide your BBs onto target in low light settings. 

A one point sling designed for MP9 gas blowback submachine guns, with a quick release clasp for easy handover to a marshal or other player.

An adaptor which converts the 18mm thread on the Airsoft Scorpion Evo to a 14mm Counter Clockwise (CCW) Thread

If your priority is extending range and you run a GBB pistol or VSR-10 platform sniper rifle, the Maple Leaf 2023 Autobot HOP-up Bucking is calling your name! Also known as the "Aotubot" by Maple Leaf, this bucking is designed for pure range, with a shield-shaped contact patch for maximum contact area with your BBs and an impressive HOP-up effect. Being the 2023 model, this set also includes an air-seal promoting C-ring which also helps improve feeding. Compatibility-wise, this bucking is designed for unbridged VSR-10 and GBB pistol inner barrels.

Naturally, the Autobot is designed for use with heavy BBs (0.28g+) and is ideally paired with a Maple Leaf I-Key but works fine with standard HOP-up arm/tensioner setups. When compared to its sister bucking, the Decepticon, the Autobot is made for pure range and the Decepticon is for tighter groupings at shorter ranges. If you need maximum range, you need the Maple Leaf 2023 Autobot HOP-up Bucking for VSR/GBB!

If your priority is extending range and you run a GBB pistol or VSR-10 platform sniper rifle, the Maple Leaf 2023 Autobot HOP-up Bucking is calling your name! Also known as the "Aotubot" by Maple Leaf, this bucking is designed for pure range, with a shield-shaped contact patch for maximum contact area with your BBs and an impressive HOP-up effect. Being the 2023 model, this set also includes an air-seal promoting C-ring which also helps improve feeding. Compatibility-wise, this bucking is designed for unbridged VSR-10 and GBB pistol inner barrels.

Naturally, the Autobot is designed for use with heavy BBs (0.28g+) and is ideally paired with a Maple Leaf I-Key but works fine with standard HOP-up arm/tensioner setups. When compared to its sister bucking, the Decepticon, the Autobot is made for pure range and the Decepticon is for tighter groupings at shorter ranges. If you need maximum range, you need the Maple Leaf 2023 Autobot HOP-up Bucking for VSR/GBB!

If your priority is extending range and you run a GBB pistol or VSR-10 platform sniper rifle, the Maple Leaf 2023 Autobot HOP-up Bucking is calling your name! Also known as the "Aotubot" by Maple Leaf, this bucking is designed for pure range, with a shield-shaped contact patch for maximum contact area with your BBs and an impressive HOP-up effect. Being the 2023 model, this set also includes an air-seal promoting C-ring which also helps improve feeding. Compatibility-wise, this bucking is designed for unbridged VSR-10 and GBB pistol inner barrels.

Naturally, the Autobot is designed for use with heavy BBs (0.28g+) and is ideally paired with a Maple Leaf I-Key but works fine with standard HOP-up arm/tensioner setups. When compared to its sister bucking, the Decepticon, the Autobot is made for pure range and the Decepticon is for tighter groupings at shorter ranges. If you need maximum range, you need the Maple Leaf 2023 Autobot HOP-up Bucking for VSR/GBB!

If your priority is extending range and you run a GBB pistol or VSR-10 platform sniper rifle, the Maple Leaf 2023 Autobot HOP-up Bucking is calling your name! Also known as the "Aotubot" by Maple Leaf, this bucking is designed for pure range, with a shield-shaped contact patch for maximum contact area with your BBs and an impressive HOP-up effect. Being the 2023 model, this set also includes an air-seal promoting C-ring which also helps improve feeding. Compatibility-wise, this bucking is designed for unbridged VSR-10 and GBB pistol inner barrels.

Naturally, the Autobot is designed for use with heavy BBs (0.28g+) and is ideally paired with a Maple Leaf I-Key but works fine with standard HOP-up arm/tensioner setups. When compared to its sister bucking, the Decepticon, the Autobot is made for pure range and the Decepticon is for tighter groupings at shorter ranges. If you need maximum range, you need the Maple Leaf 2023 Autobot HOP-up Bucking for VSR/GBB!

If you are looking for reliable long term performance from your EU series GBB pistol, AAP-01 Assassin or Umarex/VFC pattern Glock GBB pistol, CowCow are here to provide! This replacement fire pin lock is constructed from stainless steel using precise CNC machining and is polished using MAF polishing technology for smoother function with less friction. The stainless steel construction of this part prevents warping under heavy use, and guarantees reliable long term performance, assuming the rest of your pistol is working fine!

A heavy duty, tough stitching rigger belt for quick attach and removal, which will do you proud through the toughest of environments.

A small and compact Block Battery designed and built by NUPROL specifically for Airsoft Skirmishers, intended to last a whole day Airsofting, but have limited battery storage space in their AEG. 

A Double Magazine Retention Pouch designed for WE Europe Airsoft Pistol Standard Sized Magazines. The holsters are constructed from Durable Polymer and are designed to allow the user to gain access to their Magazine and draw them as quick as possible. 

This product is designed to be a mock grenade that can be attached to your rig, or placed in a pouch to look like you are carrying a real grenade. It is based on the M84 stun grenade that is used by the American military and is a pretty accurate replication. The body of this dummy grenade is made from a lightweight Polymer, and the spoon and pin are made from Alloy. The pin can be pulled from the grenade and the spoon is springloaded, adding to the realism. This dummy grenade is perfect for Mil-Sim players, reenactors or those who are looking to play the role of a Grenadier. 

The grenade can also be attached to the MOLLE of your rig by using the Spoon / Handle to loop through the MOLLE loops to give you more of an 'Operator' look.

If you run a G3 platform AEG and you need mags with no rattle and decent capacity, Fuxing has you covered! This magazine is constructed with a steel shell and polymer internals and is a copy of the most common G3 magazine style seen in the real steel world. The externals include an over-insertion stop on each side and reinforcing ribs giving it a realistic look, and on the inside this is a spring-loaded mid-cap mag, meaning no battle rattle as you move!

The magazine can be loaded through the fill/feed port at the top of the magazine body using a speedloader or loading tool and holds a very respectable 150 BBs; more than enough to keep pace with the M4 and AK users. These mags should fit any Tokyo Marui clone G3 AEG platform, including the G3A3, G3A4, G3 SAS, MC51 and PSG1. Compatibility with the LCT G3 series is yet to be confirmed.

If you want one MOLLE front panel to handle all missions, the MOLLE Multi-Mission Front Panel is what you need. This MOLLE-mounted front placard is designed to be mounted to the front of plate carrier vests but can also be mounted to chest rigs, backpacks and anything else with MOLLE compatibility.

The panel is constructed from 1000D Nylon, boasting high stitch density for durability and features a wide variety of open-topped magazine pouches with adjustable elastic retainers at the top for security. If your mission requires a mix of shotgun shells, rifle magazines, pistol magazines and other kit, this front panel is ideal for your setup.

If you are looking for tracer BBs in heavier weights to maximise your effective range, NUPROL have what you need! The RZR 0.28g Green Tracer BB has the same ultra-tight +/- 0.01mm tolerances as NUPROL's standard BBs but are tracer BBs which will glow when fired through an Airsoft tracer unit, helping you instinct aim in close quarters and guide your BBs onto target in low light settings. These BBs are also biodegradable, making them great for use outdoors!