Airsoft Under £25

If you like to shoot a lot with minimum downtime winding or reloading a flash mag is just what you need! This magazine is styled after the 5.45x39 AK74 magazine and is a flash mag, meaning it functions similarly to a high-cap but instead of the usual winding wheel we have a pull cord beneath a hinged baseplate which allows you to wind the magazine far faster than a conventional winding wheel.

The magazine can be filled through the fill window at the top of the mag body as usual, and with it filled up you can pull the baseplate open from the front of the mag and access the winding cord inside. A few pulls of the cord should tension the magazine so you can get shooting with a massive 500rnd capacity at your disposal. If you like maximum shooting and minimum winding and reloading, this is the mag for you!

If you need a slim stick battery for your AK or SMG-5 AEG this will do the trick! The Giant Power 7.4v 1300mAh 25C LiPo Stick Battery measures approximately 18.5x1x2cm, which makes it perfect for longer battery compartments such as AK dust covers and SMG-5 platforms. The battery is pre-wired to a Mini-Tamiya connector and the length of wire between the cell group and the connector is approximately 6cm.

The battery is a 7.4V 2-cell battery in stick configuration with a continuous discharge rate of 25C, making it great for almost any Airsoft AEGs, RC cars and more!

A retention holster designed to fit and snugly hold EU-Series pistols with one neat trick up it's sleeve... It will happily accept a pistol with a torch or laser mounted on to it. Flashlight/laser users will know the pain of limited holsters being available, so it's great to combine the flexibility of a fabric holster with the convenience and tacticool features of a moulded retention holster.

If you're looking for a lightweight alternative to your decked-out plate carrier, the 8Fields Tactical UltraLight Mesh MOLLE Plate Carrier Vest is a great option. Constructed from 1000D Polyester mesh with polymer buckles, the Ultralight Plate Carrier offers fantastic airflow and breathability while keeping excess weight to an absolute minimum. 

The front and rear plate bags are compatible with most Airsoft replica SAPI plates and are adorned with MOLLE webbing loops, ready for MOLLE pouches to be mounted where you need them. Adjustment is available at both the waist and shoulders, allowing for a comfortable fit for most body types. If you want to move fast and stay cool during summer skirmishes, the 8Fields Tactical UltraLight Mesh MOLLE Plate Carrier Vest is what you need!

If you're looking for a lightweight alternative to your decked-out plate carrier, the 8Fields Tactical UltraLight Mesh MOLLE Plate Carrier Vest is a great option. Constructed from 1000D Polyester mesh with polymer buckles, the Ultralight Plate Carrier offers fantastic airflow and breathability while keeping excess weight to an absolute minimum. 

The front and rear plate bags are compatible with most Airsoft replica SAPI plates and are adorned with MOLLE webbing loops, ready for MOLLE pouches to be mounted where you need them. Adjustment is available at both the waist and shoulders, allowing for a comfortable fit for most body types. If you want to move fast and stay cool during summer skirmishes, the 8Fields Tactical UltraLight Mesh MOLLE Plate Carrier Vest is what you need!

If you're looking for a lightweight alternative to your decked-out plate carrier, the 8Fields Tactical UltraLight Mesh MOLLE Plate Carrier Vest is a great option. Constructed from 1000D Polyester mesh with polymer buckles, the Ultralight Plate Carrier offers fantastic airflow and breathability while keeping excess weight to an absolute minimum. 

The front and rear plate bags are compatible with most Airsoft replica SAPI plates and are adorned with MOLLE webbing loops, ready for MOLLE pouches to be mounted where you need them. Adjustment is available at both the waist and shoulders, allowing for a comfortable fit for most body types. If you want to move fast and stay cool during summer skirmishes, the 8Fields Tactical UltraLight Mesh MOLLE Plate Carrier Vest is what you need!

If you're looking for a lightweight alternative to your decked-out plate carrier, the 8Fields Tactical UltraLight Mesh MOLLE Plate Carrier Vest is a great option. Constructed from 1000D Polyester mesh with polymer buckles, the Ultralight Plate Carrier offers fantastic airflow and breathability while keeping excess weight to an absolute minimum. 

The front and rear plate bags are compatible with most Airsoft replica SAPI plates and are adorned with MOLLE webbing loops, ready for MOLLE pouches to be mounted where you need them. Adjustment is available at both the waist and shoulders, allowing for a comfortable fit for most body types. If you want to move fast and stay cool during summer skirmishes, the 8Fields Tactical UltraLight Mesh MOLLE Plate Carrier Vest is what you need!

This is an updated version of the Dummy PRC-152 we had in a while ago. This time around it has much nicer Polymers, a better look, tougher construction and the dummy battery can now be removed.

If you have some CQB to do and you shoot a lot this pack was made with you in mind! The GBB Pistol CQB Pack combines ASG Cursed BBs in a whopping 1KG bulk bag with ASG Ultrair green gas, a slightly higher power gas than standard green gas. If you do your dirty work up close and personal this pack will give you everything you need to keep your GBB pistol in the fight and save you a few quid at the same time! 

A set of tactical helmet mounts designed for the Earmor M32 Communications Headset. Designed to attach to the side rails of a replica FAST helmet or similar.

A Lazer MOLLE Panel for VX/Buckle Up compatible Chest Rigs, which offers a large 24x15cm Velcro/MOLLE combo panel for installing Pouches, Patches and more. The Panel easily connects to Buckle Up Systems via the dual Polymer Clasps at the top. If you run multiple loadouts which all require their own Chest Rig Setup, then a VX/Buckle Up System is the easiest way to quickly swap the main pouch section of your Chest Rig out.

A Lazer MOLLE Panel for VX/Buckle Up compatible Chest Rigs, which offers a large 24x15cm Velcro/MOLLE combo panel for installing Pouches, Patches and more. The Panel easily connects to Buckle Up Systems via the dual Polymer Clasps at the top. If you run multiple loadouts which all require their own Chest Rig Setup, then a VX/Buckle Up System is the easiest way to quickly swap the main pouch section of your Chest Rig out.

A Lazer MOLLE Panel for VX/Buckle Up compatible Chest Rigs, which offers a large 24x15cm Velcro/MOLLE combo panel for installing Pouches, Patches and more. The Panel easily connects to Buckle Up Systems via the dual Polymer Clasps at the top. If you run multiple loadouts which all require their own Chest Rig Setup, then a VX/Buckle Up System is the easiest way to quickly swap the main pouch section of your Chest Rig out.

If you want to tighten your groupings and get maximum accuracy from your GBB or VSR setup, the Maple Leaf 2023 Decepticon HOP-up Bucking for VSR/GBB is the HOP-up rubber you need! Also known as the "Desepticons" bucking by Maple Leaf, this is the 2023 version with a refined shape and packaged with an air-seal promoting C-ring which also enhances feeding reliability. Compatibility-wise, this bucking is designed for unbridged VSR-10 and GBB pistol inner barrels.

The Decepticon makes use of a flat shield-shaped contact patch and is ideally paired with a Maple Leaf I-Key but also works with standard HOP-up arms/tensioners. When compared to its sister bucking, the Autobot, the Decepticon is made for maximum accuracy with a slight range sacrifice while the Autobot is focussed purely on long range. If you're all about accuracy, the Maple Leaf 2023 Decepticon HOP-up Bucking for VSR/GBB belongs in your build!

If you want to tighten your groupings and get maximum accuracy from your GBB or VSR setup, the Maple Leaf 2023 Decepticon HOP-up Bucking for VSR/GBB is the HOP-up rubber you need! Also known as the "Desepticons" bucking by Maple Leaf, this is the 2023 version with a refined shape and packaged with an air-seal promoting C-ring which also enhances feeding reliability. Compatibility-wise, this bucking is designed for unbridged VSR-10 and GBB pistol inner barrels.

The Decepticon makes use of a flat shield-shaped contact patch and is ideally paired with a Maple Leaf I-Key but also works with standard HOP-up arms/tensioners. When compared to its sister bucking, the Autobot, the Decepticon is made for maximum accuracy with a slight range sacrifice while the Autobot is focussed purely on long range. If you're all about accuracy, the Maple Leaf 2023 Decepticon HOP-up Bucking for VSR/GBB belongs in your build!

If you want to tighten your groupings and get maximum accuracy from your GBB or VSR setup, the Maple Leaf 2023 Decepticon HOP-up Bucking for VSR/GBB is the HOP-up rubber you need! Also known as the "Desepticons" bucking by Maple Leaf, this is the 2023 version with a refined shape and packaged with an air-seal promoting C-ring which also enhances feeding reliability. Compatibility-wise, this bucking is designed for unbridged VSR-10 and GBB pistol inner barrels.

The Decepticon makes use of a flat shield-shaped contact patch and is ideally paired with a Maple Leaf I-Key but also works with standard HOP-up arms/tensioners. When compared to its sister bucking, the Autobot, the Decepticon is made for maximum accuracy with a slight range sacrifice while the Autobot is focussed purely on long range. If you're all about accuracy, the Maple Leaf 2023 Decepticon HOP-up Bucking for VSR/GBB belongs in your build!

A high quality 1300mAh 11.1V LiPo battery suitable for Airsoft and RC use. A single stick type battery that will fit into most Airsoft AEG hand guards or stocks and stock tubes.

An ultra-thin and lightweight battery, perfect for squeezing into even the tightest spots. The battery provides 1200mAh of power with a discharge rate of 20c. The battery is so thin it can fit into stock tubes and AK/MP5 AEG Battery compartments.

NUPROL - 8.4v 1600mAh Ni-Mh Small Block Battery is an Airsoft Gun Battery designed and built by NUPROL specifically for Airsoft Skirmishers and are part of their POWER range of Batteries. 

Only with AKs can get you can get a mag like this, so AK fanboys count yourself lucky. Styled after the Russian design of the AK quad stack magazine, this AEG flash magazine holds a whopping 1000 rounds so you can stay on the field without changing mags for a crazy amount of time.

With a textured front and back for easy mag grippage, the magazine is reloaded using the top fill window and being a flash mag, it is wound (reloaded) at the bottom using the pull cord.

So if you're a fan of AKs and hate reloading, this chunky boy is for you!

An Airsoft suppressor designed to be fit onto Airsoft guns which have a 14mm Counter Clockwise, CCW, threaded outer barrel, and has a textured body for easy attachment and removal. The suppressor is filled with foam designed to reduce the amount of noise your gun makes by absorbing a small amount of the sound when your Airsoft Gun is fired.

This suppressor is perfect for any Airsoft Skirmisher who is looking to give their Airsoft rifle a new look, or for those who want to modify the sound of their Airsoft replica.

A Water Bottle Pouch and Bottle combo which can be attached to MOLLE compatible Rigs and Vests allowing you to re-hydrate on the move.  mThe pouch itself is constructed from 600D Cordua, with a quick release Polymer Buckle, and comes with a Polymer Bottle designed to hold water. 

The bottle is secured into the pouch via the Elasticated Retention holding it from the top, and the pouch also features a vented mesh base should the worst happen and water start to leak. This product is perfect for Airsoft Skirmishers who play Mil-Sim games, or for dog walkers and Hikers who have a MOLLE Compatible backpack and want to save space.

A Water Bottle Pouch and Bottle combo which can be attached to MOLLE compatible Rigs and Vests allowing you to re-hydrate on the move.  mThe pouch itself is constructed from 600D Cordua, with a quick release Polymer Buckle, and comes with a Polymer Bottle designed to hold water. 

The bottle is secured into the pouch via the Elasticated Retention holding it from the top, and the pouch also features a vented mesh base should the worst happen and water start to leak. This product is perfect for Airsoft Skirmishers who play Mil-Sim games, or for dog walkers and Hikers who have a MOLLE Compatible backpack and want to save space.

An upgrade hop bucking for Tokyo Marui and other compatible products. Designed for the Tokyo Marui VSR-10 bolt action and blow back pistols in mind including the Hi-Capa 4.3, Hi-Capa 5.1, M1911A1, SIG P226, SOCOM MK23 and G26. 

If you need to feed your DMR or long-range primary, 0.30g Airsoft Precision BBs are a fine choice! Supplied in a resealable bag containing 3333 BBs approximately, these Airsoft BBs boast ultra-tight tolerances and a highly polished surface; exactly what you need to make the most of an upgraded HOP-up and maximise your long-range accuracy potential! 

If you need magazines but you also want to add a more realistic look to your M4/AR15 the NUPROL W-Mag would be a great choice. 

This magazine holds 380 BBs and is loaded through the feed window, located on the top of the magazine bod. This magazine is constructed from strong polymer, while still being lightweight, allowing you to carry more mags while speeding round the field.

Being a flash mag, the magazine is reloaded by pulling the bottom winding cord located under the base plate, keeping you in the fight for longer. 

This magazine takes its name from the mock witness windows located on either side of the magazine, through which you can see convincing mock 5.56 cartridges which add a touch of realism to any Airsoft M4/AR15 AEG.

If you need magazines but you also want to add a more realistic look to your M4/AR15 the NUPROL W-Mag would be a great choice. 

This magazine holds 380 BBs and is loaded through the feed window, located on the top of the magazine bod. This magazine is constructed from strong polymer, while still being lightweight, allowing you to carry more mags while speeding round the field.

Being a flash mag, the magazine is reloaded by pulling the bottom winding cord located under the base plate, keeping you in the fight for longer. 

This magazine takes its name from the mock witness windows located on either side of the magazine, through which you can see convincing mock 5.56 cartridges which add a touch of realism to any Airsoft M4/AR15 AEG.

A super thin triple crane stock 11.1v 1300mAh 25C LiPo, which features a Deans Connector instead of the standard Mini Tamiya. 

An Airsoft M4 6mm BB Gun High Capacity Magazine with a twist, instead of using a bottom winding wheel, a pull cord is built into the magazine which can be pulled to quickly prime the magazine.

If you want to improve your AEGs accuracy, range and consistency, a barrel upgrade is a great start! The Specna Arms 6.02mm Steel Tightbore Inner Barrel promises to be an improvement even over stock 6.03mm brass tightbore barrels and its stainless steel construction makes it far more rigid and less prone to bends than other brass and aluminium barrels.

This barrel is cut for standard Airsoft AEGs and should fit most of them, though we suggest referring to the product description of your gun to find out what length you need. The standard AEG barrel cuts mean you can use this precision barrel with standard AEG HOP-up buckings, HOP-up nubs and HOP-up units, meaning all your existing parts should fit and plenty of opportunities to pair this barrel with other accuracy upgrades. If accuracy is a priority for you this upgraded barrel is a must!