Airsoft Under £25

A triple crane stock 11.1v 1450mAh 25C LiPo, which features a Deans connector instead of the standard small Tamiya.

If you are looking for some kit to style up your lid and give it more of an "operator" look, or you have a GoPro or similar camera and need somewhere to put a power bank, this helmet pouch from EmersonGear will do the job perfectly. The Accessory/Counterweight Pouch attaches to your helmet's velcro and provides a velcro strip across the top, elastic loops to add foliage or help keep your wiring neat, and a pouch at the rear with an open top and two flaps to secure, with cable router loops mounted beneath. The pouch measures approximately 12 x 3 x 8.5cm.

If you are looking for some kit to style up your lid and give it more of an "operator" look, or you have a GoPro or similar camera and need somewhere to put a power bank, this helmet pouch from EmersonGear will do the job perfectly. The Accessory/Counterweight Pouch attaches to your helmet's velcro and provides a velcro strip across the top, elastic loops to add foliage or help keep your wiring neat, and a pouch at the rear with an open top and two flaps to secure, with cable router loops mounted beneath. The pouch measures approximately 12 x 3 x 8.5cm.

If you are looking for some kit to style up your lid and give it more of an "operator" look, or you have a GoPro or similar camera and need somewhere to put a power bank, this helmet pouch from EmersonGear will do the job perfectly. The Accessory/Counterweight Pouch attaches to your helmet's velcro and provides a velcro strip across the top, elastic loops to add foliage or help keep your wiring neat, and a pouch at the rear with an open top and two flaps to secure, with cable router loops mounted beneath. The pouch measures approximately 12 x 3 x 8.5cm.

If you are looking for some kit to style up your lid and give it more of an "operator" look, or you have a GoPro or similar camera and need somewhere to put a power bank, this helmet pouch from EmersonGear will do the job perfectly. The Accessory/Counterweight Pouch attaches to your helmet's velcro and provides a velcro strip across the top, elastic loops to add foliage or help keep your wiring neat, and a pouch at the rear with an open top and two flaps to secure, with cable router loops mounted beneath. The pouch measures approximately 12 x 3 x 8.5cm.

If you are looking for some kit to style up your lid and give it more of an "operator" look, or you have a GoPro or similar camera and need somewhere to put a power bank, this helmet pouch from EmersonGear will do the job perfectly. The Accessory/Counterweight Pouch attaches to your helmet's velcro and provides a velcro strip across the top, elastic loops to add foliage or help keep your wiring neat, and a pouch at the rear with an open top and two flaps to secure, with cable router loops mounted beneath. The pouch measures approximately 12 x 3 x 8.5cm.

A 7.4v 1450mAh LiPo stick battery with Deans connectors, suitable for Airsoft in addition to other application such as RC vehicles and toys too.

If you've got the drop on the enemy, and have managed to get within touching distance without being seen, there is nothing quite as satisfying as getting a knife kill in an Airsoft skirmish! In most cases, all that is needed is an empty hand and a pat on the shoulder to send the unfortunate victim back to regen, though for those who want a little more immersion, and something cool looking to add to their kit, there is always the Patrol Base Polymer Training Tomahawk! This Tomahawk is constructed from polymers, with a hard high density polymer handle and a slightly softer polymer head. If you were looking for a way to make your kit look more badass, this dummy Tomahawk will do it, and introduce the opportunity to get some memorable kills on the skirmish field!

A Polymer constructed retention holster for TM/WE/KJW/KWA Hi-Capa series Gas Blowback Pistols, which will attach to a Belt or to MOLLE (using a separately sourced MOLLE adapter) and hold your pistol tight until you press the release button.

A spare magazine for AR36 Airsoft Guns, which has the option of either a standard 125rnd capacity, or a realistic 30rnd capacity by flicking a switch.

If you need BBs for outdoor skirmishing, these 0.28g Airsoft Precision BBs are well suited to the task. These highly polished 0.28g BBs boast ultra-tight tolerances for maximum accuracy and smooth, reliable feeding. Supplied in a resealable bag containing approximately 3571 BBs, BLS BBs are a fantastic balance of affordability and performance, ideal for upgraded HOP-up units and long-range focussed setups. 

If you want your AAP-01 GBB to be running at its absolute best an enhanced nozzle would be a great choice to get the most out of this impressive platform. The CowCow Enhanced Plastic Nozzle Set includes an enhanced nozzle, nozzle valve, valve lock pin, valve spring and enhanced piston head, and when installed these parts should improve the shot to shot consistency, provide smoother cycling performance and improve the rate of fire of the AAP-01 Airsoft GBB.

Providing quick access to basic First Aid supplies, and is attachable to MOLLE Rigs, Pouches and Backpacks. The pouch is constructed from 600D Cordua, and features two Rear Securing Straps for MOLLE panels. 

Providing quick access to basic First Aid supplies, and is attachable to MOLLE Rigs, Pouches and Backpacks. The pouch is constructed from 600D Cordua, and features two Rear Securing Straps for MOLLE panels. 

Providing quick access to basic First Aid supplies, and is attachable to MOLLE Rigs, Pouches and Backpacks. The pouch is constructed from 600D Cordua, and features two Rear Securing Straps for MOLLE panels. 

Providing quick access to basic First Aid supplies, and is attachable to MOLLE Rigs, Pouches and Backpacks. The pouch is constructed from 600D Cordua, and features two Rear Securing Straps for MOLLE panels. 

This Nylon/Steel constructed Lower Face Protection offers comfortable and protection from BB hits, with the sides being made from soft material so that you can still aim down your sights when wearing it. The Mask is fully adjustable via a four-point harness system, and can be comfortable worn with Goggles/Helmets. The large elastic headband prevents slipping and helps keep the mask firmly planted on your face during Airsoft games.

This Nylon/Steel constructed Lower Face Protection offers comfortable and protection from BB hits, with the sides being made from soft material so that you can still aim down your sights when wearing it. The Mask is fully adjustable via a four-point harness system, and can be comfortable worn with Goggles/Helmets. The large elastic headband prevents slipping and helps keep the mask firmly planted on your face during Airsoft games.

This Nylon/Steel constructed Lower Face Protection offers comfortable and protection from BB hits, with the sides being made from soft material so that you can still aim down your sights when wearing it. The Mask is fully adjustable via a four-point harness system, and can be comfortable worn with Goggles/Helmets. The large elastic headband prevents slipping and helps keep the mask firmly planted on your face during Airsoft games.

This Nylon/Steel constructed Lower Face Protection offers comfortable and protection from BB hits, with the sides being made from soft material so that you can still aim down your sights when wearing it. The Mask is fully adjustable via a four-point harness system, and can be comfortable worn with Goggles/Helmets. The large elastic headband prevents slipping and helps keep the mask firmly planted on your face during Airsoft games.

If you are an AK fan but are getting green-eyed over the M4/AR-15's accessory options, a railed handguard will cure that! The CYMA 20mm Picatinny Railed Handguard for AK AEG is constructed from solid high density polymer and provides 20mm Picatinny rails at the 3, 6, 9 and 12 o'clock positions, ready for 20mm Picatinny accessories.

The side rails are short lengths, ideally designed to mount a tactical flashlight or aiming laser but can also be removed if you prefer slick sides on your handguard. The top rail features 12cm of rail space, allowing for a forward mounted red dot sight to be fitted for that slick PMC look. The bottom rail is 11cm long, providing enough room at the front so you can add a vertical or angled foregrip, or even a bipod if you see fit. The sides of the lower handguard also include ribs for extra grip, similarly to the standard issue AK-10x polymer handguards. If you want to mount your mission essential kit to your AK AEG or GBBR this handguard is one of the cheapest ways to do it!

A Mock Suppressor designed to fit on Airsoft 6mm BB Gun Assault Rifles, and is branded to look like it is a Special Forces SOPMOD Supplied Suppressor. 

A 1000D Polyester constructed Universal Drop Leg Holster for Airsoft Pistols and Sidearms, including ones that have a Laser/Light Module installed. The Holster can be worn on your hip via a belt, or attached to a belt as a Drop Leg Holster via the included straps. The Holster claims it can fit any size of Pistol, but we would recommend medium sized ones, such as EU Series and 1911 Platform Pistols. The Holster is very simple to use, being shaped to your Pistol by opening it fully, inserting the Pistol, and closing the Velcro flaps around it.

A 1000D Polyester constructed Universal Drop Leg Holster for Airsoft Pistols and Sidearms, including ones that have a Laser/Light Module installed. The Holster can be worn on your hip via a belt, or attached to a belt as a Drop Leg Holster via the included straps. The Holster claims it can fit any size of Pistol, but we would recommend medium sized ones, such as EU Series and 1911 Platform Pistols. The Holster is very simple to use, being shaped to your Pistol by opening it fully, inserting the Pistol, and closing the Velcro flaps around it.

A 1000D Polyester constructed Universal Drop Leg Holster for Airsoft Pistols and Sidearms, including ones that have a Laser/Light Module installed. The Holster can be worn on your hip via a belt, or attached to a belt as a Drop Leg Holster via the included straps. The Holster claims it can fit any size of Pistol, but we would recommend medium sized ones, such as EU Series and 1911 Platform Pistols. The Holster is very simple to use, being shaped to your Pistol by opening it fully, inserting the Pistol, and closing the Velcro flaps around it.

A 1000D Polyester constructed Universal Drop Leg Holster for Airsoft Pistols and Sidearms, including ones that have a Laser/Light Module installed. The Holster can be worn on your hip via a belt, or attached to a belt as a Drop Leg Holster via the included straps. The Holster claims it can fit any size of Pistol, but we would recommend medium sized ones, such as EU Series and 1911 Platform Pistols. The Holster is very simple to use, being shaped to your Pistol by opening it fully, inserting the Pistol, and closing the Velcro flaps around it.

A 1000D Polyester constructed Universal Drop Leg Holster for Airsoft Pistols and Sidearms, including ones that have a Laser/Light Module installed. The Holster can be worn on your hip via a belt, or attached to a belt as a Drop Leg Holster via the included straps. The Holster claims it can fit any size of Pistol, but we would recommend medium sized ones, such as EU Series and 1911 Platform Pistols. The Holster is very simple to use, being shaped to your Pistol by opening it fully, inserting the Pistol, and closing the Velcro flaps around it.

A 1000D Polyester constructed Universal Drop Leg Holster for Airsoft Pistols and Sidearms, including ones that have a Laser/Light Module installed. The Holster can be worn on your hip via a belt, or attached to a belt as a Drop Leg Holster via the included straps. The Holster claims it can fit any size of Pistol, but we would recommend medium sized ones, such as EU Series and 1911 Platform Pistols. The Holster is very simple to use, being shaped to your Pistol by opening it fully, inserting the Pistol, and closing the Velcro flaps around it.

This high capacity magazine is designed for SMG-5 AEGs and holds a whopping 570rnds, much more than any other SMG-5 magazines. It is filled from the top of either magazine by pulling back the mock bullets or opening the fill window, and wound from the bottom clockwork wheel to feed BBs.

An ultra thin, long LiPo crane stock battery. The battery is designed to fit into as little space as possible, taking up very little room allowing it to be fit into stocks and small battery compartments.