Airsoft Under £25

Need a battery and a charger for your upgraded AEG? Get both at once with the Specna Arms Set EASY Charger With an 11.1v 1000mAh Battery! This package has everything you need to get started with 11.1V batteries. The balance charger ensures that all your battery's cells are charged equally, it also works for 7.4V batteries. 

11.1V batteries should only be used with upgraded platforms, the high voltage and discharge rate can cause excess wear on internal parts inside stock AEGs. However, if your Airsoft rifle is built to take 11.1V batteries you will notice an improved rate of fire, snappier trigger response and possibly even an increase in FPS.

A two inch barrel extension for 14mm CCW threaded barrels, providing that little extra length should you wish to add a suppressor or tracer to your favourite RIF but can't because of a rail system being in the way.

VP Racing are well known for their high quality and high performance batteries with this one being a crane form factor. The battery has a voltage of 7.4v, has a capacity of 1450mAh and a discharge rate of 25C. The battery is connected to your AEG via the Mini-Tamiya connector, not to be confused with Deans connector, however adaptors are available.

The battery consists of two cells working in tandem, with each cell measuring 13x0.7x2cm each with a cable length of roughly 7.5cm of wire. The battery should fit in crane stock battery compartments such as M4s and some handguards and full stocks, but remember to measure up before hand!

A compact LiPo Airsoft battery, designed to be used in tight awkward spaces, without compromising on overall capacity.

A tough and affordable Red Dot Sight for Airsoft Guns that have a 20mm RIS/RAS Accessory Rail. Powered by a CR2032 Battery (included) this Sight offers a Red or Green Target Dot with five brightness levels, and is ready to install onto a Picatinny Rail via the integrated Rail Mount. If you're looking for the finishing touch to your Airsoft Gun and want to improve your target reaction times, then the Theta Optics Red Dot 1x40 Reflex Sight Replica is the perfect way to get started on the ladder of optics.

If you want to unlock more functionality from your Gate ASTER or TITAN MOSFET, the USB Link from Gate is exactly what you're after! This dongle attaches to your AEGs Deans battery connector and allows you to connect it via micro-USB or USB Type C to your Android device, Windows PC or Mac and control diagnostics, trigger sensitivity, burst modes, rate of fire adjustment and all the other fantastic features built into the ASTER and TITAN ETUs. Unlock the full potential of your Gate TITAN or ASTER and give yourself the edge in battle!

Here we have a no frills carry case, but with a little extra in the front in the form of a laser cut MOLLE panel for all your tactical attachment needs! The bag has a double zipped compartment, the dimensions of which measure approximately 100x6x18cm, which is large enough to hold the majority of assault rifles, SMG and some smaller snipers such as the G-Spec.

The interior of the bag has 3 Velcro strap loops to secure your Airsoft replica and 4 Velcro pockets, perfect for storing mags such as M4/STANAG or AR36 mags. With a Velcro retained carry handle for ease of transport, the bag is constructed from 600D Nylon with soft foam internal padding.

Here we have a no frills carry case, but with a little extra in the front in the form of a laser cut MOLLE panel for all your tactical attachment needs! The bag has a double zipped compartment, the dimensions of which measure approximately 100x6x18cm, which is large enough to hold the majority of assault rifles, SMG and some smaller snipers such as the G-Spec.

The interior of the bag has 3 Velcro strap loops to secure your Airsoft replica and 4 Velcro pockets, perfect for storing mags such as M4/STANAG or AR36 mags. With a Velcro retained carry handle for ease of transport, the bag is constructed from 600D Nylon with soft foam internal padding.

Here we have a no frills carry case, but with a little extra in the front in the form of a laser cut MOLLE panel for all your tactical attachment needs! The bag has a double zipped compartment, the dimensions of which measure approximately 100x6x18cm, which is large enough to hold the majority of assault rifles, SMG and some smaller snipers such as the G-Spec.

The interior of the bag has 3 Velcro strap loops to secure your Airsoft replica and 4 Velcro pockets, perfect for storing mags such as M4/STANAG or AR36 mags. With a Velcro retained carry handle for ease of transport, the bag is constructed from 600D Nylon with soft foam internal padding.

Here we have a no frills carry case, but with a little extra in the front in the form of a laser cut MOLLE panel for all your tactical attachment needs! The bag has a double zipped compartment, the dimensions of which measure approximately 100x6x18cm, which is large enough to hold the majority of assault rifles, SMG and some smaller snipers such as the G-Spec.

The interior of the bag has 3 Velcro strap loops to secure your Airsoft replica and 4 Velcro pockets, perfect for storing mags such as M4/STANAG or AR36 mags. With a Velcro retained carry handle for ease of transport, the bag is constructed from 600D Nylon with soft foam internal padding.

The MOLLE Triple STANAG Rifle Mag/GP pouch from 8 Fields Tactical provides an excellent solution to the problem of small rigs with limited MOLLE space. The pouch features an open topped triple magazine pouch at the rear, suitable for STANAG 5.56 magazines and similarly sized mags such as AUG mags, with a large dual zipped general purpose pouch on the front. This setup is great if you rock a more compact rig such as a JPC or compact chest rig, as it allows you to use less MOLLE loops and carry more kit. Having a GP pouch on your rig can be very convenient, as it gives space for any civilian equipment which can't be left unattended such as phones, wallet and car keys, and any small weird shaped items such as tools and maps. Not having a GP pouch can be annoying, but now you can carry one without taking up valuable room for magazines!

The MOLLE Triple STANAG Rifle Mag/GP pouch from 8 Fields Tactical provides an excellent solution to the problem of small rigs with limited MOLLE space. The pouch features an open topped triple magazine pouch at the rear, suitable for STANAG 5.56 magazines and similarly sized mags such as AUG mags, with a large dual zipped general purpose pouch on the front. This setup is great if you rock a more compact rig such as a JPC or compact chest rig, as it allows you to use less MOLLE loops and carry more kit. Having a GP pouch on your rig can be very convenient, as it gives space for any civilian equipment which can't be left unattended such as phones, wallet and car keys, and any small weird shaped items such as tools and maps. Not having a GP pouch can be annoying, but now you can carry one without taking up valuable room for magazines!

The MOLLE Triple STANAG Rifle Mag/GP pouch from 8 Fields Tactical provides an excellent solution to the problem of small rigs with limited MOLLE space. The pouch features an open topped triple magazine pouch at the rear, suitable for STANAG 5.56 magazines and similarly sized mags such as AUG mags, with a large dual zipped general purpose pouch on the front. This setup is great if you rock a more compact rig such as a JPC or compact chest rig, as it allows you to use less MOLLE loops and carry more kit. Having a GP pouch on your rig can be very convenient, as it gives space for any civilian equipment which can't be left unattended such as phones, wallet and car keys, and any small weird shaped items such as tools and maps. Not having a GP pouch can be annoying, but now you can carry one without taking up valuable room for magazines!

The MOLLE Triple STANAG Rifle Mag/GP pouch from 8 Fields Tactical provides an excellent solution to the problem of small rigs with limited MOLLE space. The pouch features an open topped triple magazine pouch at the rear, suitable for STANAG 5.56 magazines and similarly sized mags such as AUG mags, with a large dual zipped general purpose pouch on the front. This setup is great if you rock a more compact rig such as a JPC or compact chest rig, as it allows you to use less MOLLE loops and carry more kit. Having a GP pouch on your rig can be very convenient, as it gives space for any civilian equipment which can't be left unattended such as phones, wallet and car keys, and any small weird shaped items such as tools and maps. Not having a GP pouch can be annoying, but now you can carry one without taking up valuable room for magazines!

If you are looking for high-cap mags for your Airsoft M4 but you want reduced weight so you can carry more, we admire your spirit and wish you well in your quest for victory through volume of fire. The NUPROL 450rnd L-Mag will be an asset to you thanks to its ultra-low weight and exceptional capacity. This mag crams a whopping 150 rounds in over a standard M4 high-cap, and is lighter as well, thanks to its polymer construction. This magazine can be loaded through the fill window at the top of the magazine and is wound up using the winding wheel on the baseplate.

The external design of this magazine is patterned after the popular real world "L" magazine and includes all the details one would expect to see, such as textured panels on either side of the mag body for extra gripping qualities, and mock witness windows. This magazine is compatible with most M4/AR15 AEG rifles but should also work in SCAR and 416 AEGs.

If you are looking for high-cap mags for your Airsoft M4 but you want reduced weight so you can carry more, we admire your spirit and wish you well in your quest for victory through volume of fire. The NUPROL 450rnd L-Mag will be an asset to you thanks to its ultra-low weight and exceptional capacity. This mag crams a whopping 150 rounds in over a standard M4 high-cap, and is lighter as well, thanks to its polymer construction. This magazine can be loaded through the fill window at the top of the magazine and is wound up using the winding wheel on the baseplate.

The external design of this magazine is patterned after the popular real world "L" magazine and includes all the details one would expect to see, such as textured panels on either side of the mag body for extra gripping qualities, and mock witness windows. This magazine is compatible with most M4/AR15 AEG rifles but should also work in SCAR and 416 AEGs.

A LiPo Battery for Airsoft Electric Guns, with an 11.1v rating and 600mAh capacity. This compact 11.1v LiPo is ideal for PDWs and Airsoft Guns with a small battery space (specifically the Specna Arms PDWs), and features a Mini Tamiya Connector to connect to your AEG. If you have an Airsoft Gun that needs an 11.1v Battery, and has a tight battery compartment, then this is the ideal LiPo for you.

A highly lightweight and maneuverable Chest Harness which is ideal for the operator who likes to move low and fast, made from tough 1000D Polyester and offering plenty of tactical flexibility.

A highly lightweight and maneuverable Chest Harness which is ideal for the operator who likes to move low and fast, made from tough 1000D Polyester and offering plenty of tactical flexibility.

A highly lightweight and maneuverable Chest Harness which is ideal for the operator who likes to move low and fast, made from tough 1000D Polyester and offering plenty of tactical flexibility.

A highly lightweight and maneuverable Chest Harness which is ideal for the operator who likes to move low and fast, made from tough 1000D Polyester and offering plenty of tactical flexibility.

A highly lightweight and maneuverable Chest Harness which is ideal for the operator who likes to move low and fast, made from tough 1000D Polyester and offering plenty of tactical flexibility.

A highly lightweight and maneuverable Chest Harness which is ideal for the operator who likes to move low and fast, made from tough 1000D Polyester and offering plenty of tactical flexibility.

A compact LiPo battery designed for crane stock use but also suitable for compact Airsoft hand guards too, and is designed to give you a high output for fast rate of fire and trigger response for roughly half a day dependent on trigger happiness.

Tried and true, everyone has use for NiMh crane stock batteries! The advantage of NiMh batteries over their LiPo batteries is that they are less volatile and don't require balance so you can use any charger as long as it's NiMh compatible, just make sure to not leave the battery charging unattended.

This battery has a voltage of 9.6v and a capacity of 1600mAh and is comprised of 8 cells working in unison, connected via the Mini-Tamiya connector.

This NiMh sports a crane configuration, one of the most common types and is perfect for split battery compartments, most commonly seen in M4 stocks, M16, SMG-5 and AKs with full stocks. The battery measures 12x1.8x1.8cm per 4x cells, with a wire length of roughly 8cm.

A compact LiPo battery designed for crane stock use but also suitable for compact Airsoft hand guards too, this variant of the battery is fitted with a Deans connector for upgraded Airsoft Gun connectors, rather than the standard Mini Tamiya.

If you, like many others run the coveted PDW style stocks but find yourself needing more battery space, CYMA have got something that fits the bill. Designed for rifles such at the CM.097E and CM.041G, this stock extension unit attaches to the base of the stock and gives you roughly 3cm of additional space to house larger batteries, which allows you stay in the field longer and keep picking off those all important targets.

Constructed from tough and sleek aluminium, this extension will blend right in with your loadout and no more will you fear running low in the heat of battle.

A one inch barrel extension for 14mm CCW threaded barrels, providing that little extra length should you wish to add a suppressor or tracer to your favourite RIF but can't because of a rail system being in the way.

An Alloy constructed Suppressor which will fit any Airsoft Gun with a 14mm Male Thread. There is both a CW and CCW Thread on either end of the Suppressor, ensuring maximum compatibility with replicas. The core of the Suppressor is foam-filled to help deaden the sound of your replica, and a spring core ensures that baffle strikes are minimised. The outer shell of the Suppressor features the Blackwater logo and the text 'We Were Everywhere'.

An Alloy constructed Suppressor which will fit any Airsoft Gun with a 14mm Male Thread. There is both a CW and CCW Thread on either end of the Suppressor, ensuring maximum compatibility with replicas. The core of the Suppressor is foam-filled to help deaden the sound of your replica, and a spring core ensures that baffle strikes are minimised. The outer shell of the Suppressor features the Blackwater logo and the text 'We Were Everywhere'.