Airsoft Under £25

A set of four Ladder Type Rail Covers which are made from a semi-rigid Rubber, and will easily slot over 20mm Rails to provide a more flush aesthetic, and to make the rail much more comfortable to hold. This is the perfect addition to any Rail System that has unused slots which are uncomfortable/unsightly. The Rail Covers are easy to manipulate, and simply need to be stretched over 20mm RIS to fit. They can even be cut to length if you require something more boutique.

LAYLAX - PSS10 VSR10 Spring - is a spring designed by LAYLAX for VSR bolt action sniper rifles and other compatible platforms.

A LiPo saddle battery designed to fit in handguards in replacement of the traditional 1600mAh NiMH blocks/saddles (G36 handguards etc).

This is an Aluminium constructed Muzzle Device that is designed for AK Platform replicas, but will fit and work with any Airsoft Gun that has a 14mm CCW Threaded [Male] Outer Barrel, which is 95% of replicas.

If you've treated yourself to the British classic SMG, the S&T Sterling, you'll need mags to keep it doing what it does best. The 110rnd Mid-Cap Magazine for Sterling AEG is compatible with all S&T Sterling AEGs, including the E-11 Blaster custom, and is constructed from steel, just like the real thing. 

As with other Airsoft mid-caps, this mag can be loaded through the fill/feed port on the top of the mag body using a speed loader or loading rod. With no battle rattle to give you away, a flawless steel build for realistic handling and a respectable 110 BB capacity, your S&T Sterling deserves these mags!

If you're searching for more mags for your CM.136 EBB, here they are! CYMA's 15rnd Magazine w/ 11.1V 350mAh LiPo Battery for CM.136 Grach is loaded through the feed/fill window on the top using a speed loader or by hand, designed specifically for the CM.136 Grach EBB with an 11.1V LiPo battery built-in. 

The integral battery is charged using the cable included with your CM.136 via the charging port on the baseplate. As with all LiPo batteries, this battery MUST be charged using a LiPo balance charger through the balance port. Standard LiPo safety applies, including not leaving your battery charging while unattended and always using a battery charging bag. Keep your super fun EBB Grach running for longer in-game with the CYMA 15rnd Magazine w/ 11.1V 350mAh LiPo Battery for CM.136 Grach!

If you have had a mishap with your bevel gear, this KRYTAC replacement part should sort it! The KRYTAC Bevel Gear Assembly for V2/3 AEG Gearbox is constructed from hardened steel and is compatible with any AEG which uses a V2 or V3 gearbox. The hardened steel construction makes this bevel gear perfect to pair with an upgraded motor to guarantee long-term performance.

Super conductive and easy to route throughout your gearbox and rest of your Airsoft AEG.

A 100% Polyester T-Shirt in a beautiful Digicam pattern, with Fast Wicking Mesh Fabric that will keep you cool when you're Airsoft skirmishing or out walking. Ideal as a Base Layer, or a T-Shirt by itself, this is the perfect way to stay cool and stay hidden. Whether you're out on the Airsoft field or just out walking, the Jack Pyke T-Shirt is an ideal base layer / undershirt.

If you run a modernised, tactical Airsoft AK AEG rifle you will probably want some equally modern magazines! The 500rnd AK47 Reinforced Polymer High-cap Magazine from CYMA is designed with a strong polymer shell with reinforcing ribs across all its surfaces, to strengthen the shell and provide additional grip. The base plate of the magazine is also slightly widened to allow it to be more easily drawn from a magazine pouch. This magazine holds a whopping 500 rounds and can be filled through the fill window on the top of the magazine, and is wound using the winding wheel on the baseplate. This magazine is compatible with any standard AK style Airsoft AEG, but its steep curve is a tell-tale sign that this is a 7.62 style AK magazine, for those who like to keep it real!

If you are looking for custom parts to add some unique character to your M4/AR15 AEG to set it apart from all the others, you have found the perfect part! The 1A1 CNC bolt catch from Gate replaces the original dummy bolt catch on your M4/AR15 AEG with a precisely made alternative with a unique skull-shaped paddle. This part doesn't provide any function but looks really cool, so if you are after an aesthetic tweak for your custom M4 AEG then this part would be perfect for the job!

The Ferret Hard Case is a compact yet incredibly tough Hard Case which can be used to transport and store any items that you want to keep protected from ingress of Water and Dust, as well as from Extreme Temperatures and rough Impacts. Independently tested by third party quality assurance company, Intertek, you can be sure that it lives up to its claims.

An ultra compact Generation 3 MOSFET built to be as compact as possible, requiring the smallest amount space possible, and is water resistant. 

If you're working on your gearbox and looking for more efficiency, the Lonex Aluminium Piston Head for V2/V3 Gearbox is ideal for your build. This piston head is constructed from CNC aluminium and is equipped with a rubber O-ring surrounding its surface to close the gap between the piston head and cylinder, ensuring every bit of air compressed by the piston is translated into downrange effect.

This piston head is compatible with version 2 and version 3 AEG gearboxes and is a handy part to have around for the techy types. Whether you're building a custom gearbox or upgrading, the Lonex Aluminium Piston Head for V2/V3 Gearbox is an essential part!

If you're a talented skirmisher with skills to showcase, the Novritsch GoPro Adapter for 20mm Picatinny Rails should suit you perfectly. This CNC aluminium mount attaches to any 20mm Picatinny rail and provides a mount for GoPro-style action cameras with the socket mount. Please note, the barrel-mounted rail shown in the images is for demonstration purposes only and is not included with the set. 

The mount can be fitted to position the camera on the left or right side of your primary and only minimally affects the weight distribution and balance thanks to its lightweight aluminium build. If you have epic Airsoft moments to record for the ages, the Novritsch GoPro Adapter for 20mm Picatinny Rails is what you need!

If you need mags for your SSR77, these are the ones! The Novritsch 180rnd Magazine for SSR77 AUG AEGs is constructed from translucent brown high density polymer with an olive green baseplate, just like real AUG mags. The mag holds 180 BBs loaded through the fill/feed port on the top using a speed loader or loading tool. 

Being a mid-cap magazine, you won't get any battle rattle from this mag despite its respectable 180-round capacity. Compatibility-wise, this mag should fit the majority of AUG AEGs on the market and is ideal for the super speedy Novritsch SSR77 range!

If you're a realism-focused player running an AK AEG, this mag is ideal! The ARCTURUS 30/130rnd Variable-Cap Mod.1 Magazine for AK AEGs boasts a unique modern design with a flat baseplate for mag-podding, a witness window on each side to keep track of rounds remaining and a dot matrix so you can mark your mags with a paint pen. The party trick of this magazine is its ability to switch capacities from a realistic 30 BBs up to a skirmish-friendly 130 BBs by removing the internals from the shell and flicking the switch on the internal body. 

As with other spring-fed mid-cap magazines, the 30/130rnd Variable-Cap Mod.1 is loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod. If you rock an AK AEG in game and want the choice of firepower or realism without bringing two types of mag, load up on the ARCTURUS 30/130rnd Variable-Cap Mod.1 Magazine for AK AEGs!

If you've got an M4 and fancy doing things a little differently try this 110-round pistol magazine. Its longer form makes it perfect for doubling as a foregrip and it leans into the pistol/carbine trend currently in the states. It's slimmer form factor also makes it easy to carry multiple of in your loadout. Constructed from tough but lightweight polymer, be aware that it will require a pistol magazine adapter to fit an M4/AR-15.

A medium capacity 110rnd capacity design with flare bottom to aid in speedy reloads, the mag can be loaded through the fill/feed port at the top of the magazine body using an Airsoft speed loader or loading rod. 

If you're looking to give your CM.700/700A/708 sniper rifle a bit more range the CYMA spring upgrade set will be what you're after, with the added benefit of including reinforced parts! The set includes the piston, piston head and spring guide, all of which are machined from aluminium and finished in metallic blue, and a seriously high power spring which gives out approximately 575 FPS when installed!

The Novritsch IFAK Pouch is the perfect MOLLE-mounted pouch to store a first aid kit or similar gear, allowing for fast deployment in the event of an emergency. It can be mounted vertically or horizontally thanks to the Molle Strip Clips. It comes with a black medic cross patch to attach to the Velcro surface on the front of the pouch. However, this patch can be taken off to reveal a laser-cut red cross in the form of the Novritsch Logo that is embedded into the Velcro surface.

The first aid kit is attached to an insert within the pouch that can be pulled out in a matter of seconds, this quick access is so you can provide a quick response if the worst situation comes true on the battlefield. The insert is fastened into the main pouch via a Velcro flap cover. The pouch can accommodate any 15x10x5 cm first aid kit.

The Novritsch IFAK Pouch is the perfect MOLLE-mounted pouch to store a first aid kit or similar gear, allowing for fast deployment in the event of an emergency. It can be mounted vertically or horizontally thanks to the Molle Strip Clips. It comes with a black medic cross patch to attach to the Velcro surface on the front of the pouch. However, this patch can be taken off to reveal a laser-cut red cross in the form of the Novritsch Logo that is embedded into the Velcro surface.

The first aid kit is attached to an insert within the pouch that can be pulled out in a matter of seconds, this quick access is so you can provide a quick response if the worst situation comes true on the battlefield. The insert is fastened into the main pouch via a Velcro flap cover. The pouch can accommodate any 15x10x5 cm first aid kit.

NUPROL's latest offering into the Airsoft Market with newly designed 0.20g green and red illuminated tracer BBs, made to be more consistent and have better accuracy that ever before. 

This metal AK47 body by CYMA is constructed from Aluminium and zinc alloy and is finished in a period accurate gun metal grey. This is the perfect solution for a CM.028 or CM.522 owner who wants to give their AK a metallic feel and increased realism!

If you have invested in a Tokyo Marui VSR-10 Pro and you want to add an optic, this 20mm receiver rail will do the trick! The Slong Airsoft Receiver 20mm Rail Mount For VSR-10 Sniper Rifle is designed to replace the rear iron sight on the Tokyo Marui VSR-10 Pro sniper rifle but can also be used to replace a worn-out rail on VSR-10 clones or the TM VSR-10 G-Spec sniper rifle.

The rail is constructed from aluminium and finished with matt black anodising, keeping the surface coating thin to ensure the rail remains in spec and capable of mounting any optical sight which fits 20mm Picatinny rails.

A complete upgrade Cylinder set for AEGs which includes: Cylinder, Piston, Cylinder Head, Piston head and Nozzle. Improve your air seal and shot for shot efficiency today for improved range and accuracy.

A Glass Nylon Fiber constructed Magwell adapter for the ASG Scorpion Evo, which serves as a reference point for your lead hand, and makes guiding a fresh Magazine into the Magwell much easier to perform from memory, allowing you to focus your attention solely on the battlefield where it belongs.

An Airsoft Magazine designed for use with Tokyo Marui's SCAR-H Recoil Shock range, with a design based upon the 7.62mm STANAG Standardized Magazine used by NATO Forces. 

A set of four SORBO pads designed to reduce the overall noise of your RIF and provide an improved lifespan for your internals.

This LiPo battery from Gens Ace is designed to fit into compact and slim battery compartments, such as the M4/AR15 buffer tube and the AK47/74 top cover. The battery connects to your AEG via a Deans connector (AKA T-Plug) and provides 1400mAh capacity with a 25C discharge rating. The battery is coated with heat shrink to prevent abrasion damage to the cells, and has a wire length of approximately 8.5cm, allowing some flexibility when squeezing the battery into small spaces. This battery would be great for any Airsoft gun which requires a 7.4V LiPo, but would also be of use for R/C vehicles, Drones or other electronics hobbies.

If you are looking for tracer BBs in a heavier weight for use with sniper rifles and upgraded setups NUPROL have what you need! The RZR 0.30g Green Tracer BIO BB has the same ultra-tight +/- 0.01mm tolerances as NUPROL's standard BBs but are green tracer BBs which will glow when fired through an Airsoft tracer unit, helping you instinct aim in close quarters and guide your BBs onto target in a low light outdoors setting. These BBs are also biodegradable which is great news for those of us who skirmish at sites which mandate bio BBs!