Airsoft Under £100

The Wolverine Hard Case, like the animal, is dedicated to the fierce protection of all nestled within. The Case is decked out with four layers of Pick and Pluck Foam that can be customised to perfectly fit around your items, reducing movement and damage in transit. The Case has a Rubber Seal that prevents the ingress of Water and Dust, and the tough construction protects contents from Extreme Temperatures and Impacts, as well as featuring a Pressure Relief Valve to balance the inner Pressure of the case when travelling to new altitudes.

If you have a fiery passion for Airsoft and you need a sidearm to display this, the VORSK EU18 Red Match is the one! This GBB pistol marries EU series handling and performance with VORSK's unique aesthetic, rocking metallic red accents, front slide serrations, raised light-enhancing iron sights, a flared magazine well and a threaded barrel, ready for your suppressor or tracer unit.

As with VORSK's other EU-series offerings, the EU18 Red Match is compatible with common EU series magazines from VORSK, RAVEN or WE and is kitted out with a 6.03mm tightbore inner barrel straight out of the box, promising improved accuracy potential and a slight raise in FPS when compared to its rivals. If you like your sidearm with a side order of style, the EU18 Red Match will suit you well and is not afraid to stand out!

If you are lucky enough to own one of the scarce Airsoft Lee Enfield Rifles out there, your options just broadened! Introducing the Lee Enfield Steel Scope Mount from Vector Optics, a robustly constructed scope mount designed for the real thing, capable of housing any 1-inch/25mm tube scope to give your Lee Enfield the No.4 MK1 (T) sniper rifle look!

If your MCX is a bit of a pig and you want more agility, the Airsoft Artisan 10" Carbon Fibre Handguard for MCX Virtus AEG will do the trick. This handguard is constructed from authentic Carbon Fibre and as such, it tips the scales at only 123g! Though this handguard will help your MCX lose weight, it does so without compromising on attachment interfaces, offering M-LOK slots at 3, 6, 9 and 12 o'clock and additional slots at the lower offset angles.

Another advantage of the Carbon Fibre handguard is its width of approximately 48mm, allowing you to run an integrally suppressed setup and still make use of your M-LOK slots provided your suppressor is slim enough. The set also includes a short section of aluminium 20mm Picatinny rail for M-LOK pre-installed on the rearmost upper M-LOK slot, designed to seamlessly interface with your receiver rail. If you're seeking a speedy look for your MCX without compromising accessory options, the Airsoft Artisan 10" Carbon Fibre Handguard for MCX Virtus AEG is what you need!

A 20mm mounted Russian tactical flashlight with an included pressure pad, designed to blind your enemies and provide you with the ultimate tactical illumination device to see you through your skirmish.

For a more robust and thick lighting solution, the K-2P is for those of you with more Russian inclined loadouts. Constructed from full alloy, the torch shines at a brilliant 800 lumens and is powered by 2 x CR123A batteries.

The torch is easily attached to your AK rail or 20mm Picatinny system and includes a remote pressure switch, which again can be easily attached to a rail right out of the box. Another inclusion is the offset mount, which allows you to forward mount your torch on the bottom rail to avoid casting a shadow if you are using a suppressor.

Wan to bling out your VSR Bar 10? Treat your rifle with this 22.5-inch fluted barrel in your choice of either twisted or straight fluting, whichever would suit your loadout more. The PPSH barrel is constructed from extremely lightweight aluminium to help keep you light on your feet during skirmishes.

The fluting has been machined to a perfect uniformity that it sure to give your VSR/Bar-10 a sleek modern aesthetic. In real steel-rifles, fluting helps disperse heat from the barrel, as well as keep the barrel's weight down. At the end of the barrel is a 14mm female CCW thread for use with attaching tactical muzzle devices, such as flash hiders, suppressors and tracer units. Included is a thread cap if you don't fancy running any muzzle devices and like to keep things simple.

Wan to bling out your VSR Bar 10? Treat your rifle with this 22.5-inch fluted barrel in your choice of either twisted or straight fluting, whichever would suit your loadout more. The PPSH barrel is constructed from extremely lightweight aluminium to help keep you light on your feet during skirmishes.

The fluting has been machined to a perfect uniformity that it sure to give your VSR/Bar-10 a sleek modern aesthetic. In real steel-rifles, fluting helps disperse heat from the barrel, as well as keep the barrel's weight down. At the end of the barrel is a 14mm female CCW thread for use with attaching tactical muzzle devices, such as flash hiders, suppressors and tracer units. Included is a thread cap if you don't fancy running any muzzle devices and like to keep things simple.

This huge gun bag is designed to carry two of your favourite primaries! With a length of 130cm, this bag is pretty much guaranteed to accommodate any of your rifles, snipers or shotguns. There are also internal pockets to store the necessary tools required for your platforms. The bag also has a choice of a simple carry handle or backpack straps so you can carry your Airsoft platforms conveniently to the skirmish battlefield.

If you own a CM.033 M1A1 Thompson AEG replica, this will most certainly be of interest to you! Introducing the Battleaxe Real Wood Furniture Kit for CM.033 M1A1, a set containing a real wood stock, handguard and pistol grip all authentically profiled to match the real M1A1 SMG. The parts in this kit are all perfectly finished to provide a subtle sheen with wood grain showing through which even the best faux wood cannot match.

Suppose you're looking for some extra magazines for your gas blowback AK platforms, if so, then the GHK 40rnd Magazine for AK74 GBBRs is exactly what you need! It has a polymer shell and alloy internals with a steel spring, which makes it very robust and reliable, sure to survive even the most intense of skirmishes. The magazine features a slick black design that matches most AK platforms perfectly.

The magazine holds up to 40 rounds, and features Polymer feed lips, which are also the fill location using an Airsoft speedloader. The magazine gas fill valve is found at the rear using any Airsoft green gas. The insertion method for this magazine is the traditional AK "rock and lock" style, this means you have to insert the front section of your mag first, then, "rock" your magazine back to lock it in place in your AK rifle.

If you want a high-quality magazine that will never let you or your gas blowback AK down, the GHK 40rnd Magazine for AK74 GBBRs is certainly the choice for you!

If you're into compact sidearms but want a stylish, custom look, the RAVEN Hi-Capa 3.8 Pro GBB Pistol w/Red Dot Sight should suit your needs. This full-metal Hi-Capa platform is as compact as Hi-Capas get, with a 3.8-inch outer barrel and shortened slide, resulting in improved gas efficiency, slide speed and a faster draw from a holster. 

The 3.8 Pro is available in either chrome silver or metallic gold, giving your sidearm a side of style to make it pop next to boring black pistols. When it comes to sights, the 3.8 Pro is remarkably well-equipped, boasting light-enhancing iron sights with green inserts and a pre-installed "BDS" red dot sight, ideal for fast target acquisition and low light skirmish scenarios. As with other RAVEN Hi-Capas, the 3.8 Pro is also rocking a 6.03mm tightbore inner barrel, giving you an accuracy edge you really don't deserve for this price! 

For those looking for a more realistic handling experience from their Hi-capa 4.3, Airsoft Masterpiece has come through again, this time with a steel outer barrel complete with 11mm CW female threads! This outer barrel is constructed entirely from steel, and is immaculately finished down to each dummy locking ridge and the .45 ACP engraving on the chamber. Adding a steel barrel can alter your pistols handling characteristics considerably, raising the point of balance and making it feel more like a real firearm.

If you have an AR-36 but no sight to mount upon it, how about getting a replica of the real steel sight designed specifically for integrating well with the carry handle of the AR-36? This JJ Airsoft Red Dot Sight has that unique design you're looking for to match your AR-36! It mounts onto 20mm Picatinny rails via a steel mounting bolt, although it is a replica of an Ar-36 sight, it would look just as awesome and unique on any Airsoft rifle.

It is constructed from a durable alloy, strong enough to withstand the unsympathetic conditions of the toughest skirmishes and operations. Being a red dot sight, it has no magnification, however, it features 7 levels of illumination and both the elevation and windage of the red dot can be adjusted. Make sure your sight is perfectly zeroed, then dominate the skirmish field with your surgical accuracy.

The SR Q Furniture Set is a complete Grip/Stock set for AK Platform GBBs (Gas Blowback Guns), and will provide a gorgeous and futuristic all-in-one Pistol Grip and Stock, as well as a comfortable Foregrip to give your AK a sci-fi update! This kit is very easy to install, needing only your Stock and Pistol Grip to be removed, and is the perfect way to give your Airsoft Gun a modern update.

If you want to bring your M1928 Thompson AEG up a level in realism, this conversion kit will do it! The  Battleaxe Real Wood Furniture Kit for CM.051 M1928 Thompson comprises a real wood stock, a real wood vertical foregrip/handguard and a real wood pistol grip. 

To fit this conversion kit you will screws and mounts from the original CM.051, the kit only includes the real wood furniture. This kit is designed for the CM.051 Thompson AEG, it may fit other brands but modification will be required. If your CYMA Thompson needs an added dose of authenticity, a real wood kit is the way to go!

If you are looking for a second box magazine for longer operations or just because you have trigger-happy tendencies, Battleaxe is here to sort you out! The Battleaxe 2000rnd Box Magazine for T8 MK46 LMG - Sound Control is designed ONLY for the A&K FN MK46 MOD 0 T8 LMG AEG. The fill window of this beast of a magazine can be found at the top on a hinge making it easy to pour entire bottles of BBs in!

The magazine itself is constructed from polymer with a fabric cover, the feed tubes coil up from the box and are made from steel, guaranteeing strength. This magazine boasts both sound control and auto winding mode, meaning you have the choice between winding up the magazine with a flip of a switch or letting it do the winding automatically when it detects your AEG firing. Perfect for those who want to spend more time shooting and less time winding!

Unzip the fabric cover and you will find at the bottom of the magazine there is a switch with three settings and the battery compartment. The central position is the "off" position, pushing the switch into its named position activates either the sound control or "auto-winding" mode respectively. The battery compartment lid comes off and reveals space for a 9V battery, this is crucial for the magazine to function

If you are looking for a second box magazine for longer operations or just because you have trigger-happy tendencies, Battleaxe is here to sort you out! The Battleaxe 2000rnd Box Magazine for T8 MK46 LMG - Sound Control is designed ONLY for the A&K FN MK46 MOD 0 T8 LMG AEG. The fill window of this beast of a magazine can be found at the top on a hinge making it easy to pour entire bottles of BBs in!

The magazine itself is constructed from polymer with a fabric cover, the feed tubes coil up from the box and are made from steel, guaranteeing strength. This magazine boasts both sound control and auto winding mode, meaning you have the choice between winding up the magazine with a flip of a switch or letting it do the winding automatically when it detects your AEG firing. Perfect for those who want to spend more time shooting and less time winding!

Unzip the fabric cover and you will find at the bottom of the magazine there is a switch with three settings and the battery compartment. The central position is the "off" position, pushing the switch into its named position activates either the sound control or "auto-winding" mode respectively. The battery compartment lid comes off and reveals space for a 9V battery, this is crucial for the magazine to function

If you're looking for a target-shooting pistol with realistic features, the GLOCK 22 Gen.4 CO2 Target Shooting Pistol is what you need. This full-metal Glock 22 Gen.4 replica is a little different than the usual Airsoft Glock replica, making use of a unique internal system based on UMAREX's airgun line, though it is still chambered in 6mm Airsoft BBs. This means it hits out at an astonishing 400 FPS on 0.2g BBs approximately, promising maximum effect on target but making it unsuitable for Airsoft skirmishing.

Externally, the GLOCK 22 Gen.4 CO2 Target Shooting Pistol boasts licensed Glock trademarks across the design and an external build matching the real steel Glock Gen.4 configuration perfectly, giving you the elite look and maximum realism. The frame and slide are a perfect match for the real Gen.4 Glock, with the exception of the disassembly levers and right side slide lock/release catch which are moulded in and non-functional.

When fired, this Glock will absolutely devastate a beverage can, putting out far more muzzle energy than your standard Airsoft Glock replicas. Build quality is also top-notch, making use of a well-finished alloy slide and outer barrel along with a solid, matt finished high density polymer frame. If you're looking for a purebred steel ringer with maximum effect on target, the UMAREX GLOCK 22 Gen.4 CO2 Target Shooting Pistol will do what you need it to!

An electronically wound, 5000 round  high capacity box magazine, designed for use with A&Ks Airsoft replica PKM support weapon.