Airsoft Magazines

If you're running your VMP-1 SMG as a backup, the VORSK 20rnd Short Gas Magazine for VMP-1/2 GBB is the compact magazine you need! This green gas magazine holds 20 BBs and is designed for the VORSK VMP-1 and VMP-2 GBB platforms. The mag is loaded through the feed lips on the top or through the follower channel by pulling the follower on the front down. You can use a speed loader or load by hand, depending on your timescale!

Filling the internal gas reservoir requires that you invert the magazine, indexing your green gas can with the fill valve on the baseplate. VORSK recommends V6 or V8 green gas for this magazine to stay within its performance parameters. The major advantage of this mag is its short overall length, allowing you to get lower in the prone position and take advantage of surrounding cover. If you dream of using your VMP-1 like a giant pistol, this mag also makes it far more practical to carry your VMP-1 on your belt or leg!

A 20rnd spare or replacement Magazine for the CYMA branded CM.706 Airsoft Sniper Rifle. If you want to spend more time set up in your nest and less time walking back to the safe zone for a reload, then you need to stock up on Magazines to prevent you having to give away a good position. Constructed from a mix of Alloy and Polymer, these Magazines can be filled by hand or using a Speedloader, and are a great way to stay in the fight for longer. The design of the Magazine allows them to 'spring' out of the Mag Well when released, making them much easier to remove.

A spare magazine for L96 Type Airsoft 6mm BB Gun Sniper Rifle. The magazine is officially for the ASG L96 Sniper Rifle, but will fit a range of other Brands. 

A 29-round magazine designed primarily for use with the ASG Challenger XP17 series of pistols.

If you run a modernised, tactical Airsoft AK AEG rifle you will probably want some equally modern magazines! The 500rnd AK47 Reinforced Polymer High-cap Magazine from CYMA is designed with a strong polymer shell with reinforcing ribs across all its surfaces, to strengthen the shell and provide additional grip. The base plate of the magazine is also slightly widened to allow it to be more easily drawn from a magazine pouch. This magazine holds a whopping 500 rounds and can be filled through the fill window on the top of the magazine, and is wound using the winding wheel on the baseplate. This magazine is compatible with any standard AK style Airsoft AEG, but its steep curve is a tell-tale sign that this is a 7.62 style AK magazine, for those who like to keep it real!

Whether you are going a Vietnam war loadout, or you just like the compact form and unmistakable design of the legendary MAC-10, you will need some spare mags to run it in true SMG style! The JG 450rnd High-Cap Magazine is designed for the JG0452 MAC-10 AEP, but should also fit and feed in the TM MAC-10 AEP. This magazine is a wheel wound high-cap constructed with a steel shell and polymer internals. The fill window can be found on the top of the magazine, and can be opened by hand and the BBs poured straight in. The winding wheel is located on the bottom of the magazine and is a slightly wider design than the norm, meaning more comfort if you have to wind in a hurry!

Constructed from heavy duty polymer, the most apparent and eye-catching feature of this magazine is the transparent side panels showcasing the 9 red and gold mock shotgun shells within. that adds to the realistic aesthetic.

The magazine itself holds 100 rounds and is a mid-cap magazine and is loaded from the top using a speed loader. It being a mid-cap design also means that there is no 'battle rattle' from loose BBs or wheel winding as you would get in a high-cap magazine. The external of the magazine also features a raised ridge pattern for ease of use and provides extra grip even when wearing gloves.

This magazine is compatible with the CYMA CM.102, but may potentially fit other replicas, although please note that this has not been tested.

If you are looking for mid-caps with a bigger-than-average capacity the EMG 210rnd Strike Industries Polymer Magazine for M4/AR-15 AEG fits the bill! These magazines are constructed from seriously solid high density polymer with a steel feed spring and a high-vis orange follower so you can easily see when you are fresh out of ammo.

Being officially licenced by Strike Industries, this magazine is a near 1:1 copy of the real Strike Industries "Strike Mag MK1" and is not shy about its brand pedigree, with subtle licenced trademarks across the design as well as realistic 5.56x45 calibre markings. If you are looking for a more realistic alternative to the PTS EPM magazine, this would be a great choice!

An Airsoft Magazine designed for use with Tokyo Marui's SCAR-H Recoil Shock range, with a design based upon the 7.62mm STANAG Standardized Magazine used by NATO Forces. 

If you've treated yourself to the British classic SMG, the S&T Sterling, you'll need mags to keep it doing what it does best. The 110rnd Mid-Cap Magazine for Sterling AEG is compatible with all S&T Sterling AEGs, including the E-11 Blaster custom, and is constructed from steel, just like the real thing. 

As with other Airsoft mid-caps, this mag can be loaded through the fill/feed port on the top of the mag body using a speed loader or loading rod. With no battle rattle to give you away, a flawless steel build for realistic handling and a respectable 110 BB capacity, your S&T Sterling deserves these mags!

A 50rnd Low Capacity Magazine for the G&G UMG Airsoft Electric Gun. Being a Low-Cap design, this Magazine will feed quietly into the Gun until it is empty, unlike High-Cap designs that will rattle with each movement. The Magazine is filled using a Speedloader to force BBs in through the feed tube at the top. If you own a G&G UMG and want to carry more ammunition without giving your position away to the battle-maraca sound of High-Caps, then the G&G Armament 50rnd Low-Cap Magazine For UMG is ideal.

A 27rnd spare or replacement gas magazine for G&G's latest line of GPM92 gas blowback pistols.

If you need mags for your SSR77, these are the ones! The Novritsch 180rnd Magazine for SSR77 AUG AEGs is constructed from translucent brown high density polymer with an olive green baseplate, just like real AUG mags. The mag holds 180 BBs loaded through the fill/feed port on the top using a speed loader or loading tool. 

Being a mid-cap magazine, you won't get any battle rattle from this mag despite its respectable 180-round capacity. Compatibility-wise, this mag should fit the majority of AUG AEGs on the market and is ideal for the super speedy Novritsch SSR77 range!

A simple spare additional or replacement magazine for your G&G G2H Airsoft AEG. With a 40rnd real steel capacity limit, yo u can run and gun with zero BB rattle whilst sniping away with your electronic powered AEG.

If you need capacity for your S&T PPSh-41 AEG but don't like drum mags, get yourself a few of these! The S&T 540rnd High-cap Stick Magazine for PPSh-41 AEG is constructed from steel with polymer internals, holding 540 BBs loaded through the fill window on the top of the mag body.

This mag is only compatible with the S&T PPSh-41 and will not fit the Snow Wolf version.

If you need mags for your ASG P-10C CO2 version, here you go! Just like the original mag supplied with your ASG P-10C CO2 GBB pistol, this magazine holds 22 BBs and is constructed from alloy with a high-density polymer baseplate. Loading the mag is the same procedure as other GBB magazines, either load through the feed lips at the top or through the follower channel on the front when the follower is held down. You can use a speed loader or do it by hand, depending on your timescale!

While the CO2 and Green Gas versions of the P-10C are cross compatible, we have been told specifically by ASG not to use CO2 mags in the polymer slide equipped green gas model to avoid premature wear and tear and potentially, catastrophic failure. We suggest you heed this warning!

The CO2 compartment is inside the shell and accessible with the baseplate removed. To achieve this, simply pull upwards on the polymer tab at the bottom of the follower channel and slide the baseplate forward. With this done, you will see the CO2 plug inside; unscrew this and you can pop in a 12g CO2 capsule (we recommend adding a bit of silicone lube to the top of the capsule), tighten it back down again, slide your baseplate back into position and you're good to go! 

If you need mags for your King Arms VSS Vintorez or AS VAL these are the ones! This great value box of 5 midcaps is built to match the real thing perfectly, including the reinforcement ribs on the sides and the unique shape of the 9X39mm real steel Vintorez/VAL magazine. The magazines can be loaded through the fill/feed port at the top of the magazine body using an Airsoft speed loader or loading rod. Being spring-loaded mid-caps, with these mags in your rig you don't need to worry about battle rattle!

These mags are designed for the King Arms VSS Vintorez/AS VAL AEG platform and will not work in the LCT or CYMA VSS/AS VAL AEGs.

For those of you running the historical PPSh, you'll need sufficient ammunition to lay down that all important suppressing fire. With a whopping 540 capacity, the mag is a high-cap design, wheel wound from the bottom, so you won't be switching mags all the time.

To help keep with the realism of your replica, the mag features an alloy outer shell, with a realistic feel and weight. A great mag for those of you that prefer the more historic Airsoft replica, although be aware that this mag is only compatible with the Snow Wolf version of the PPSH41.

If you are running the Papasha and you need more firepower an extra Drum Magazine should be plenty! The Snow Wolf 2000rnd Drum Magazine for PPSh-41 AEG is constructed with a steel exterior and polymer internals and is a wheel-wound high-cap magazine with an insane 2000rnd capacity. This mag is only compatible with the Snow Wolf PPSh-41 EBB AEG and will in all likelihood not work with the S&T version.

Need some extra firepower for your AK AEG? The NUPROL 2500rnd C-Mag Double Electric drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to repel an ambush. This drum magazine is constructed from high-density polymer and is styled after the well known Beta C-Mag, designed by Jim Sullivan and manufactured by the Beta Company.

The advantage of the Beta C-mag design is that it provides immense capacity without preventing the shooter from getting nice and low in the prone position due to its dual drum layout. This example is an autowinding drum magazine which can be wound using the button on the front, meaning less work for your busy fingers in game!

A high capacity magazine designed for G&G M14 AEGs. An utterly essential piece of Airsoft kit for any G&G M14 owners, this spare high cap magazine allows you to carry more ammunition in the field without needing to make a hasty retreat to reload your magazines.

A multipack of magazine for the ASG Scorpion Evo. These new magazines from ASG allow you to insert your own decals to make your magazines look more realistic. 

If you are running the hard recoiling SRC SR40 GBB, you will need some mags! The 30rnd CO2 Magazine for SR40 GBB SMG is constructed with a steel shell featuring authentic reinforcement ribs on each side, granting an authentic weight and feel along with flawless looks.

This magazine is a CO2 magazine, meaning it is powered by a 12g unthreaded CO2 capsule. The capsule is inserted into the bottom of the mag by removing the baseplate and unscrewing the CO2 plug using an Allen key. The mag is loaded through the polymer feed lips at the top of the design, and we recommend a speed loader with a GBB adapter for ease of loading. Holding 30 BBs, this mag is perfect for skirmishers who value realism.

A spare or replacement Magazine for the CYMA CM.700 / M40A3 Spring Powered Sniper Rifle, which is perfect for staying in the fight for longer, or spending longer on the Target Range without re-filling Magazines. If you own one of these Sniper Rifles and want carry more ammunition, then these slimline and lightweight Magazines are perfect to carry on your person; especially if you've made the effort to obtain a concealed position and don't want to give it away!

If you are rocking the VZ.61 pocket AEP submachine gun as a sidearm you must be taking advantage of its fully automatic capabilities, as such, you will need more magazines! This magazine holds 80 rounds and is a wheel wound high capacity design with a steel shell, steel feed spring and polymer internals. This magazine is sized to mimic the real 20 round standard magazine for the VZ.61 Scorpion and has realistic reinforcement ribs on either side to keep the looks of your lil killer looking faithful to the real firearm. The magazine can be filled through the fill port at the top of the magazine and requires winding up using the winding wheel on the bottom of the magazine after filling. 

This magazine is specifically for the STTI ST92F, in that this is a non-blowback mag and features incredible gas efficiency. The magazine is constructed from high high-density polymer and is incredibly lightweight compared to tis alloy counterparts. The magazine holds 23 rounds, filled at the top using a speed loader and the gas is filled at the bottom with green gas.

If you're looking for magazines for your big boy AR, the East Crane 130rnd Steel Mid-Cap Magazine For SR25/AR10 AEG should do the trick! This magazine is constructed with a stamped steel shell and polymer internals, patterned after real steel SR25 20-round magazines and holding 130 BBs. Like other Airsoft mid-caps, this mag is loaded through the fill/feed port on the top of the magazine body using a speed loader or loading tool. 

Compatibility-wise, this magazine is for SR25 AEGs and will not fit standard M4/AR-15 receivers. Patterned after the Classic Army SR25 magazine style, this mag should fit East Crane, Classic Army, CYMA and A&K SR25 AEGs but won't fit G&G SR25s due to their different magazine design. 

A 600rnd High Capacity Magazine for the LCT LK-33 Series, made with a highly realistic Steel Outer Shell to closely match the real thing. It is filled by pouring BBs in through the top Fill Window, and wound at the base of the Magazine to feed BBs into your Gun. If you own an LCT LK-33 Series Airsoft Electric Gun and want to stay in the fight for longer without re-filling Magazines, then the LCT LK007 LR-223 600rds Magazine is ideal.

If you're looking for spare magazine for your Archon, you've come to the right place. The body is constructed from alloy, for a nice well weighted feel when loading/reloading. Powered by green gas, the mag is filled at the bottom, with the BBs being inserted into the mag using a speedloader via the feed lips or by pulling the spring tab down and filled straight into the BB chamber.

The magazine holds 20 rounds and is fits such models as the EMG Archone Type B.

If you're looking for high quality mid-caps with a more realistic look than EPM mags, the EMG 210rnd Troy BattleMag Magazines for M4/AR-15 AEGs; 2 Pack should suit you perfectly! Like EPM mags, these have a whopping capacity of 210 BBs, many more than other standard-length mid-caps but unlike EPMs, these mags are patterned after the real steel Troy BattleMag magazine and officially licenced by Troy through EMG. Perfect for the realism fans!

Just like the real BattleMag, the flanks of the mag body boast snake scale style texture for enhanced traction and a rubber magazine pull assist on the bottom for improved control during fast reloads. The pull assist is also useful for pulling the mags out of tight pouches, giving you a bit extra to hold into to speed up your reloads. 

Loading the BattleMag is the same process as other Airsoft mid-caps; through the fill/feed port on the top of the magazine body using an Airsoft speed loader or loading tool. The massive capacity may make this mag difficult to load using ODIN or similar loaders when the mags are new, so we recommend bedding the magazine in before using a crank wound loader by filling it up with a thumb plunger loader and emptying it a few times. If you want your magazines to be as realistic as your primary, the EMG Troy BattleMag 2 pack is what you need!