Airsoft Magazines

If you're running the incredibly swift SSR9 AEG from Novritsch, you'll need loads of these to keep it fed! The Novritsch 120rnd Magazine for SSR9 AEG is constructed from high density polymer and can be loaded through the fill/feed port at the top of the mag body using a speed loader or loading rod. 

The slim design of these magazines allows you to carry plenty, and it goes without saying, you'll need a lot of these mags to keep up with the SSR9 DSG's insane rate of fire!

If you are sniping you probably don't need that much extra ammo, but there is nothing worse than hiding on the deck fumbling with your speed loader as the enemy close in, trust us! The Double Eagle M52 magazine is constructed from polymer and holds 27 rounds, giving you 27 more chances to get that kill! These magazines are nice and compact, and easy to store inside pistol magazine pouches or a utility pouch. This magazine looks like a VSR design but we have not yet been able to confirm compatibility.

Looking for AK74 magazines for a Soviet-era loadout? The 150rnd Mid-cap in Bakelite Orange from CYMA is constructed from polymer which is dyed to match the Bakelite magazines issued with the earliest variants of the AK74 rifle to the Soviet Army. This magazine is a spring loaded mid-cap and can be loaded through the fill/feed port at the top of the magazine body, using either a speed loader or a loading rod/tool. The advantage of mid-cap magazines is that they do not rattle, and can be an asset to a sneaky player who wants to move fast and still get the drop on the enemy team. This magazine is a 5.45x39 style magazine and is most appropriate for an AK74 or AKS74U AEG but will fit and feed in most AK platform AEGs.

If you are running the Double Eagle DEK762 and you want mags that match the original, you just found them! The Double Eagle 130rnd 7.62x39 Style Mid-Cap Magazine for M4/AR-15 AEG is styled after real steel 7.62x39mm AR magazines, making it a perfect fit for the DEK762 but also compatible with most M4/AR-15 AEGs.

The magazine is constructed with a steel shell, polymer internals and a steel feed spring, showcasing mock reinforcement ribs stamped into each side. This mag is also quite short for a 130-round mag, allowing you to get closer to the ground when shooting from the prone position and make better use of surrounding cover. As with other Airsoft mid-caps, the 7.62x39 style magazine is loaded through the fill/feed port at the top of the magazine body using a speed loader or loading tool. Whether you own the DEK762 or you want to add an unconventional look to your M4/AR-15 AEG, this mag is perfect for the job!

If you have an SMG-5 and have caught straight mag fever no need to fret, we have the cure! The CYMA 120rnd Straight Mid-Cap Magazine For SMG-5/CM.106 AEG will give your SMG-5 AEG a whole new look similar to the legendary MP5-10, the 10mm version of the iconic SMG we all know and love.

These magazines are constructed with a steel shell, polymer internals and a steel feed spring and can be loaded with a speedloader or loading rod through the fill/feed port on the top of the magazine body. Compatibility-wise, these mags should work in the vast majority of SMG-5 AEGs out there, the CYMA CM.106 AR-9 AEG and most SMG-5/MP5 HPA magazine adapters for pistols. If you need a new look and new mags for your SMG-5 you can now hit two targets with a single BB!

A replacement/spare gas magazine for the ASG / TM MK23 NBB pistols, which is manufactured to an OEM standard.

If you have dreams of building an old school SMG-5 but you can't find the right mags, get them here while they last! The CYMA 120rnd Old School Straight Mid-cap Magazine for SMG-5 AEG Series matches the real steel early style of SMG-5 magazine perfectly, including its straight body design, reinforcement ribs and steel shell construction.

These mags are mid-caps, meaning no battle rattle as you go room to room with your SMG-5 doing what it does best, and should be compatible with practically any SMG-5 AEG platform out there. The mags can be loaded through the fill/feed port at the top of the magazine body using a standard Airsoft speedloader or loading rod and hold 120BBs, a respectable capacity for such a compact magazine design. If you have your old school handguard and your Maglite ready, finish your build off with these old school straight mags!

For those of you looking for a mid-cap magazine with a modern and realistic style with calibre engravings, this is the mag for you!

Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.

The mag features a checked ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout.

For those of you looking for a mid-cap magazine with a modern and realistic style with calibre engravings, this is the mag for you!

Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.

The mag features a checked ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout.

If you are looking for magazines with a modern style for your AK rifle, this will do the trick! The NUPROL 500rnd Waffle High-Cap magazine is designed to work with AK47/74 AEGs and is a 7.62x39mm style magazine. The mag has a waffle texture on the outside to add gripping qualities and improve strength and is a wheel wound high capacity magazine which holds a tasty 500 BBs.

The magazine can be filled via the fill window at the top of the magazine body and is tensioned using the winding wheel on the baseplate. This mag has the curve of a 7.62x39 style magazine making it ideal for AK47/AKM rifles but can be used in most standard AK styled AEGs.

Looking for an interesting mag for your M4? The Battleaxe 450rnd Polymer Magazine for M4/AR-15 AEGs is designed for the M4/AR15 AEG but should work in most compatible platforms, and is based on the extended 40rnd style magazine which gives your primary a more beastly, aggressive look. The magazine is a wheel-wound high-cap design with its winding wheel located on the baseplate and it is filled via the fill window at the top of the magazine body. 

Either side of the magazine has a modern hex-style texture to provide extra grip when pulling the magazine from a pouch or reloading. It also has 5.56x45mm markings recessed into the design to add a realistic look. This mag would pair well with any M4/AR15 AEG loadout with a cutting-edge, modern look! 

A replacement magazine for the Scorpion Evo series that holds far more rounds than the standard mag is perfect for the operator who love to suppress the enemy or run lightweight with minimal magazines. 

If you are a rootin' tootin' gun slinger who skirmishes with an HFC gas revolver a pocket full of these will cure what ails ya! These revolver shells hold one 6mm BB in each shell, and come packaged as a set of 6 so you can feel lucky all day. The BB is loaded into the front of each shell and is retained using an O-ring, preventing the BB from rolling out. The shells are constructed from alloy with a brass finish, with the "projectile" section of the cartridge being a slightly lighter shade for added realism. These shells are the perfect choice to fill your pouches if you run an HFC revolver in-game, but they would also be useful for photoshoots where realistic cartridges in the background will only enhance the scene!

A spare high cap magazine designed for the G&G ARP9 only.

If you are equipped with the WELL PRO WE06 PPK-20 Compact, whether it is the Standard or Advanced version, you will need a few of these to keep it well-fed! The WELL PRO 30/80rnd Variable Capacity Magazine For WE06 is constructed with a high-density polymer shell and steel baseplate and is compatible with both variants of the WE06, but is not compatible with ARCTURUS PP-19 or PPK-20 variants. 

This is an adjustable-capacity magazine which allows you to choose between 30rnd and 80rnd capacity by removing the internals from the shell and flicking the switch on the right side. This can be achieved by pushing the detent on the bottom of the mag in and sliding the baseplate off, after which the internals can be removed through the bottom. 

Otherwise, this mag works just like a normal midcap; filled with a speed loader through the fill/feed port at the top, with no battle rattle giving you away thanks to its spring-loaded internals. Whether it is the impressive Standard version or the insane Advanced version, you'll need quite a few of these to do this fantastic platform justice!

A Polymer constructed Mid-Cap Magazine for AR-10/SR-25 Platform Rifles. The Magazine features a modern P-Mag Style aesthetic with mock bullets seen through the window on the Mag, and a 220rnd capacity. The Mag is filled using a Speedloader, and will feed your Gun until empty, with no rattling or winding required.

A Polymer constructed Mid-Cap Magazine for AR-10/SR-25 Platform Rifles. The Magazine features a modern P-Mag Style aesthetic with mock bullets seen through the window on the Mag, and a 220rnd capacity. The Mag is filled using a Speedloader, and will feed your Gun until empty, with no rattling or winding required.

An Airsoft Medium Capacity Magazine that is ideal for the Airsofter wanting to inject a little more realism into their Skirmishing style. Loosely inspired by the design of modern P-Mag type magazines, this is G&Gs attempt at creating a lightweight and uniquely styled magazine for STANAG Magazine compatible Airsoft Guns, such as the M4 and M16.

EMG have teamed up with Lancer Systems to bring you a fully trademarked and licensed .300 blackout style magazine to give your Airsoft M4 some serious style points. The mag features an ultra modern aesthetic with the following trademarks:

• '.300 BLACKOUT'
• 'L5-AWA'
• 30BLK
• LANCER SYSTEMS
• 20 / 30

The mag is a mid cap that holds 190 rounds, which is a very large capacity for a mag of this type and features no 'battle rattle unlike high-cap magazines. The mag is constructed from translucent polymer, revealing the mock cartridges within for additional realism. Gripping the mag is no issue thanks to the raised stippled texture and grid pattern to make reloading as quick and easy as possible.

If you are loading up on magazines for your M4/AR15 AEG then you will want to check out the Q-Mag from NUPROL. This attractive-looking polymer magazine holds 150 BBs and can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod/tool. This magazine is designed with a crackle texture on the exterior which is useful for drawing the magazine from pouches, but also allows the mag to be used as an improvised grip to help you get the best shooting position when things get tight. This magazine is compatible with most Airsoft M4/AR15 AEGs, and is a spring loaded mid-cap, which means no battle rattle to give you away!

A Mid-Cap Magazine for M4/M16 Platform Airsoft Guns, which is made with a Steel Outer Shell to make it tough, well weighted and realistic. It has a 'stubby' design as seen in the M16s of the Vietnam War Era, and is a Spring-Loaded design which will feed all the BBs until empty without the need for winding. This is ideal for DMRs or Period Replicas, or for anyone who wants Mid-Cap Magazines that are low profile and won't get snagged on your kit as much as full size ones.

A Mid-Cap Magazine for M4/M16 Platform Airsoft Guns, which is made with a Steel Outer Shell to make it tough, well weighted and realistic. It has a 'stubby' design as seen in the M16s of the Vietnam War Era, and is a Spring-Loaded design which will feed all the BBs until empty without the need for winding. This is ideal for DMRs or Period Replicas, or for anyone who wants Mid-Cap Magazines that are low profile and won't get snagged on your kit as much as full size ones.

If you run a modernised, tactical Airsoft AK AEG rifle you will probably want some equally modern magazines! The 500rnd AK74 Reinforced Polymer High-cap Magazine from CYMA is designed with a strong reinforced polymer shell with ribs across all its surfaces, to add strength to the shell and provide additional grip. The base plate of the magazine is also slightly widened to allow it to be more easily drawn from a magazine pouch for fast and easy reloads. This magazine holds a whopping 500 rounds and can be filled through the fill window on the top of the magazine, and is wound using the winding wheel on the baseplate. This magazine is compatible with any standard AK style Airsoft AEG, but its shallow curve is a tell-tale sign that this is a 5.45 style AK magazine, for those who like to keep it real!

If you run a modernised, tactical Airsoft AK AEG rifle you will probably want some equally modern magazines! The 500rnd AK74 Reinforced Polymer High-cap Magazine from CYMA is designed with a strong reinforced polymer shell with ribs across all its surfaces, to add strength to the shell and provide additional grip. The base plate of the magazine is also slightly widened to allow it to be more easily drawn from a magazine pouch for fast and easy reloads. This magazine holds a whopping 500 rounds and can be filled through the fill window on the top of the magazine, and is wound using the winding wheel on the baseplate. This magazine is compatible with any standard AK style Airsoft AEG, but its shallow curve is a tell-tale sign that this is a 5.45 style AK magazine, for those who like to keep it real!

If you like to shoot a lot with minimum downtime winding or reloading a flash mag is just what you need! This magazine is styled after the 5.45x39 AK74 magazine and is a flash mag, meaning it functions similarly to a high-cap but instead of the usual winding wheel we have a pull cord beneath a hinged baseplate which allows you to wind the magazine far faster than a conventional winding wheel.

The magazine can be filled through the fill window at the top of the mag body as usual, and with it filled up you can pull the baseplate open from the front of the mag and access the winding cord inside. A few pulls of the cord should tension the magazine so you can get shooting with a massive 500rnd capacity at your disposal. If you like maximum shooting and minimum winding and reloading, this is the mag for you!

A series of Medium Capacity magazines for LCT branded AK platform Airsoft Electric Guns. They hold a total of 130rnds and feed BBs into the gun via a spring, meaning they feed until empty. We recommend the use of a Speedloader to fill them. They are available in a choice of three colours and are a replica of the Bakelite 5.45x39mm magazines, however will work with any LCT brand AK.

A spare magazine for HFC's gas powered Desert Eagle; made as a clone of the Tokyo Marui magazines.

If you are looking for mags for your Double Eagle EMG Noveske N4 MWS you have found them! These magazines are designed for the Double Eagle Noveske N4 MWS GBBR and unfortunately don't fit the Tokyo Marui M4A1 MWS ZET System GBBR. Thought we would get the bad news over with early!

The mag is constructed with a high-density polymer shell and alloy internals and can be loaded through the feed lips at the top of the mag body with a speed loader, preferably one with a GBB adapter. The gas fill valve is on the rear of the magazine, just below the knocker valve, and the mag is compatible with both green gas and red gas.

The design of the externals is down to Double Eagle themselves, who have added an over-insertion stop at the front of the magazine to prevent the feed lips from being damaged after a reload under pressure. On each side of the body, there is also anti-slip dot texture to prevent the magazine from being dropped and the front of the mag also features finger grooves so it can be used as a makeshift grip when shooting from unconventional positions.

If you are looking for mags for your Double Eagle EMG Noveske N4 MWS you have found them! These magazines are designed for the Double Eagle Noveske N4 MWS GBBR and unfortunately don't fit the Tokyo Marui M4A1 MWS ZET System GBBR. Thought we would get the bad news over with early!

The mag is constructed with a high-density polymer shell and alloy internals and can be loaded through the feed lips at the top of the mag body with a speed loader, preferably one with a GBB adapter. The gas fill valve is on the rear of the magazine, just below the knocker valve, and the mag is compatible with both green gas and red gas.

The design of the externals is down to Double Eagle themselves, who have added an over-insertion stop at the front of the magazine to prevent the feed lips from being damaged after a reload under pressure. On each side of the body, there is also anti-slip dot texture to prevent the magazine from being dropped and the front of the mag also features finger grooves so it can be used as a makeshift grip when shooting from unconventional positions.

A spare or replacement magazine for Raven's R9 GBB pistol. This magazine is constructed from alloy with a steel feed spring, polymer feed lips and brass valves. The magazine holds approximately 25 rounds and can be loaded either with a speed loader or by hand through the feed lips at the top, or the feed channel in the front. This magazine is suitable for summer gas, maintenance gas and green gas.