Airsoft Magazines

If you're looking for spare magazine for your Archon, you've come to the right place. The body is constructed from alloy, for a nice well weighted feel when loading/reloading. Powered by green gas, the mag is filled at the bottom, with the BBs being inserted into the mag using a speedloader via the feed lips or by pulling the spring tab down and filled straight into the BB chamber.

The magazine holds 20 rounds and is fits such models as the EMG Archone Type B.

If you're looking for high quality mid-caps with a more realistic look than EPM mags, the EMG 210rnd Troy BattleMag Magazines for M4/AR-15 AEGs; 2 Pack should suit you perfectly! Like EPM mags, these have a whopping capacity of 210 BBs, many more than other standard-length mid-caps but unlike EPMs, these mags are patterned after the real steel Troy BattleMag magazine and officially licenced by Troy through EMG. Perfect for the realism fans!

Just like the real BattleMag, the flanks of the mag body boast snake scale style texture for enhanced traction and a rubber magazine pull assist on the bottom for improved control during fast reloads. The pull assist is also useful for pulling the mags out of tight pouches, giving you a bit extra to hold into to speed up your reloads. 

Loading the BattleMag is the same process as other Airsoft mid-caps; through the fill/feed port on the top of the magazine body using an Airsoft speed loader or loading tool. The massive capacity may make this mag difficult to load using ODIN or similar loaders when the mags are new, so we recommend bedding the magazine in before using a crank wound loader by filling it up with a thumb plunger loader and emptying it a few times. If you want your magazines to be as realistic as your primary, the EMG Troy BattleMag 2 pack is what you need!

A spare or replacement magazine for the AEG Limited F17/F18 GBB Pistols. This magazine holds 21 rounds and takes 12g unthreaded CO2 capsules. The magazine is of an extended style with a long baseplate, giving your pistol the high capacity look. To install a CO2 capsule, simply pull up on the tab at the bottom of the feed spring and the baseplate should be able to slide off forwards, revealing the Allen screw plug for the CO2 reservoir. Remove this plug with the included Allen key, drop a CO2 capsule in, replace the plug and tighten it down, replace the baseplate and you are good to go!

A spare or replacement magazine for the AEG Limited F17/F18 GBB Pistols. This magazine holds 21 rounds and takes 12g unthreaded CO2 capsules. The magazine is of an extended style with a long baseplate, giving your pistol the high capacity look. To install a CO2 capsule, simply pull up on the tab at the bottom of the feed spring and the baseplate should be able to slide off forwards, revealing the Allen screw plug for the CO2 reservoir. Remove this plug with the included Allen key, drop a CO2 capsule in, replace the plug and tighten it down, replace the baseplate and you are good to go!

A chrome-effect gas magazine for the WE XDM Compact 3.8, which can hold up to 17 rounds.

An Airsoft Magazine designed for use with Tokyo Marui's Recoil Shock Airsoft TM 417 6mm BB Guns. The magazine is constructed entirely from Heavy Duty Polymer, and features a Transparent Black Shell allowing the user to see through to the Internal Mock rounds which add Realism to the Magazine.

A replacement Airsoft gas magazine for the WE Europe Browning Hi-Power. The magazine is constructed from Alloy, with Alloy feed lips and base. The magazine has a 20 round capacity.

If you're looking for additional mags for your CYMA SVD/SVU you've come to the right place! Constructed from high-density polymer, these magazines hold 100 rounds so you can stay in the fight longer with your AEG.

The mag features cut grooves on the sides as well as the rear of the mag to aid in gripping, with or without gloves. Loaded at the top of the mag using a speed loader, the magazine is that of a mid-cap mag, which means no battle rattle when sneaking around.

Please note that these mags are specifically for CYMA Airsoft AEGs.

A realistic capacity magazine for the G&G ARP9 electric 9mm replica, which is perfect for those who like to test their skills and push their immersion/realism to the absolute limit.

Looking for a spare mag for your STTI ST8 NBB Airsoft pistol? You've found what you need, right here! This magazine is designed for the STTI ST8 and is constructed with a polymer shell, alloy gas reservoir, a steel feed spring and brass valves. The magazine can be loaded through the fill/feed port at the top front of the magazine body and is filled with gas through the fill valve on the baseplate. As an alternative to filling with a speed loader you also have the option of pulling down the magazine follower, found on the left side of the mag and filling by hand.

An Airsoft magazine designed for use with Tokyo Marui's STANAG accepting Recoil Shock range, with a design based upon the STANAG standardized magazine used by NATO forces. 

A spare or replacement Gas Magazine for the Cyber Gun FN Five Seven (5-7), which holds a total of 17 rounds and is constructed to the exact same standard as the original magazine, using Alloy for the body and Polymer for the feed lips.

A High Capacity Magazine for the Tokyo Marui Scorpion Mod.M Submachine Gun, that holds a total of 260rnds and is wound from the bottom of the Magazine as per any standard High Cap. To fill the Magazine, simply open the Fill Window at the top/front of the mag and pour your BBs in. Wind the clockwork wheel on the base of the mag to start feeding BBs into your gun.

An excellent set of 6 100 round SMG-7 magazines perfect for use in any airsoft skirmish, affordable price to bulk out your loadout and capibilties.

An Alloy constructed spare (or replacement) Magazine for the KWC Non-Blowback PM CO2 Makarov Pistol, which takes standard 12g CO2 Bulbs from the side and is filled with 13 x BBs either by hand or with a Speedloader. If you own a KWC PM CO2 Makarov and want to spend longer in the field playing, and less time in the safe zone reloading, then you need to stock up on spare Magazines.

An Airsoft SR25 6mm BB gun style magazine designed and built by G&G for use with their range of Airsoft Electric Gun SR25 replicas. It holds 50 rounds and is of steel construction.

If you need spare magazines for your Specna Arms or EMG Salient Arms BLU and you want to keep your pistol pure with the exact mags for the platform these are what you need! These magazines are manufactured by Armourer Works and licenced by Salient Arms through EMG and come with a Salient Arms extended baseplate to complete the SAI look. This is effectively an EU series magazine, but the included baseplate features the S in a cube logo and SAI in recessed detail on the bottom to complete the Salient Arms look.

The magazine can be filled through the fill valve on the baseplate with the magazine held inverted, and BBs can be loaded in through the feed lips at the top, or by pulling the follower down and loading through the widened section of the channel on the front, depending on your preference. Obviously, standard EU series magazines from WE and Armourer Works will fit and feed in the Specna and EMG BLU GBB pistols, but what is the point of going for a stylish Salient Arms pistol without the proper magazines?

Looking for spare mags for the G&G PCC45? You have found them! Featuring robust clear polymer construction keeping the weight down and dummy round inside for enhanced realism, this is basically the perfect airsoft mag! Who doesn't love the look on their puzzled friends' faces as they wonder how you got a real .45 ACP submachine gun?

A magazine for the VFC McMillian M40A3 6mm BB Spring Action Sniper Rifle and holds up to 20 BBs at a time.

We know some of you like to do things old school, so for all you Beretta fans M38 looking for some more ammunition this mag from Snow Wolf is what you're after.

With a 50 round capacity, the mag is a mid cap design, so there's no rattle and no winding to keep things a little more realistic. The mag has sturdy polymer internals and an alloy shell for a good feel and weight in the hand.

So for all you Italian fanboys that like to skirmish with a piece of history, keep yourself in the field longer with this mag.

This Magazine is designed for M4 / M16 / AR platform Airsoft Electric Guns, and holds a total of 130rnds. Being a Mid-Cap Magazine it will feed until empty and doesn't have the rattle of High Capacity Magazines, but needs a Speedloader to be filled. It has textured externals to improve grip, as well as faux capacity counters for extra realism.

A High Capacity Magazine designed and built for the ASG CZ 805 Bren A1 Series of Airsoft 6mm AEG Rifles. The magazine is constructed from Polymer, with a Polymer Shell and Internals. 

If you're running an M82A1 AEG, you need some spare mags for it, and AEGs work best with high-caps, right? This mag from Snow Wolf has a whopping 500 round capacity and is wheel wound from the bottom so you won't be switching mags any time soon.

Constructed from lightweight polymer, this mag helps keep the weight of your huge Barrett down. So grab this mag and start picking people off en masse!

If you need spare magazines for your Cybergun WE/Armourer Works Desert Eagle GBB you have found them! These mags are constructed from alloy with polymer feed lips, a steel feed spring and brass valves and are compatible with the Cybergun Desert Eagle but only the version manufactured by WE or Armourer Works.

Each mag is designed to mimic the real thing perfectly, complete with mock witness windows on the left side with numerical engravings indicating the capacity of the real Deagle. The gas fill valve is located on the baseplate and the mag is compatible with summer gas, green gas and red gas. Unlike other GBB magazines, this mag cannot be loaded through the feed channel as it is closed off like a GBBR mag and instead must be loaded through the feed lips at the top of the mag, so we recommend using a speed loader with a GBB adapter for ease of loading (like this).

If you want to run your SSP18 or EU-series GBB on HPA, the Novritsch HPA SMG-5 Magazine Adapter for EU Series GBB Pistols; Gen 2 is the easiest way to do it. This adapter is pre-built using a zinc alloy magazine body and fibre-reinforced nylon polymer adapter and is outfitted for US Spec HPA lines by default. This adapter is designed to feed from curved MP5/SMG-5 AEG mid-cap magazines and HPA from an external tank (not included), increasing capacity considerably and practically eliminating FPS fluctuation due to the "cooldown" effect. 

The adapter is pre-assembled, meaning you don't need to mess around putting it together or run the risk of doing it wrong and causing injury. Naturally, you'll need an HPA bottle, air line and regulator to use this adapter and the fitting is US Spec, meaning only US Spec air lines will fit. If you're running your SSP18 in the Novritsch Minimalist Carbine Kit or as a primary, the Novritsch HPA SMG-5 Magazine Adapter for EU Series GBB Pistols; Gen 2 will give you the rapid-fire performance and capacity you need to stay ahead!

A 6mm BB Airsoft magazine, designed for use with Tokyo Marui's SMG-7 AEP electric Airsoft Submachine gun, featuring a medium capacity of 50 rounds. 

This is a 15rnd Short Magazine for the Tokyo Marui TMPSG-1 Sniper Rifle (electric). It is a compact magazine which makes prone shots much easier, and reduces the chance of magazines snagging on your equipment. It is loaded from the top using a Speedloader and is very easy to carry thanks to its' highly compact design.

If you need some additional magazines for your Ares Otto Repa SOC SLR Sniper Rifle, look no further! The Ares 40rnd Low-Cap Magazine for SOC Sniper Rifle AEG is designed specifically for this platform, it is constructed from high-density polymer and holds 40 BBs. This might seem like a low capacity but the SOC AEG is a sniper/DMR-type platform and 40rnds will be all you need to get the job done.

The magazine inserts via the "rock and lock" method, requiring that you index the front of the magazine into the well first and rotate the rear up to lock. It features ridged grooves on the sides to aid in gripping, with or without gloves. The magazine is loaded at the top of the mag using a speed loader, its low-cap design means there is no battle rattle when hiding in the bushes!

A spare or replacement Magazine for the G&G Armament M1 Garand, holding a total of 20rnds and filled using a Speedloader. These lightweight Magazines are easy to carry in bulk, and are an absolute must for an M1 Garand owner who wants to last longer in a skirmish without running out of ammo.

A spare magazine designed specifically for the Tokyo Marui 5.56 platform recoil series.