Airsoft Magazines

If you need mags for your ASG P-10C CO2 version, here you go! Just like the original mag supplied with your ASG P-10C CO2 GBB pistol, this magazine holds 22 BBs and is constructed from alloy with a high-density polymer baseplate. Loading the mag is the same procedure as other GBB magazines, either load through the feed lips at the top or through the follower channel on the front when the follower is held down. You can use a speed loader or do it by hand, depending on your timescale!

While the CO2 and Green Gas versions of the P-10C are cross compatible, we have been told specifically by ASG not to use CO2 mags in the polymer slide equipped green gas model to avoid premature wear and tear and potentially, catastrophic failure. We suggest you heed this warning!

The CO2 compartment is inside the shell and accessible with the baseplate removed. To achieve this, simply pull upwards on the polymer tab at the bottom of the follower channel and slide the baseplate forward. With this done, you will see the CO2 plug inside; unscrew this and you can pop in a 12g CO2 capsule (we recommend adding a bit of silicone lube to the top of the capsule), tighten it back down again, slide your baseplate back into position and you're good to go! 

A 20 Rounds Green Gas Magazine for the UMAREX Airsoft HK417D Gas Blowback Rifle.

A magazine designed for WE brand AR36 / G39 Airsoft gas blowback rifles.

If you're running a WE GBBR, whether it's the SCAR-L, L85/SA80, Type 91, Keltec PLR-16, KAC PDW or M4 variant, this is the one mag you need to keep them all well-fed! Constructed with a steel shell, alloy/polymer internals and brass valves, this magazine is designed for WE Open Bolt GBBRs and holds 30 BBs filled through the feed lips, either with a speed loader or by hand. This V3 version has been refined to improve the reliability and consistency, to ensure your replicas feed perfectly every time.

With wide compatibility and a strong but relatively light build, these magazines even allow you to switch off the "bolt lock" function using the catch on the top, meaning you can dry fire for a laugh or to practice weapons handling without holding the bolt catch while doing it. Compatibility-wise, these are strictly for WE Open Bolt GBBR rifles but will work in any WE Open Bolt GBBR which takes STANAG-style mags.

Do you find yourself running out of ammo way too often? We have the solution! The Tokyo Marui 90rnd Saiga-12K Long Magazine is exactly what you need to keep on blasting for longer. This magazine has a polymer shell, alloy internals and a steel spring, which makes it very strong and reliable. This magazine is sure to survive whatever a skirmish may throw at you!

The magazine holds a whopping 90 BBs and features polymer feed lips. This is also where you load the magazine using a speedloader. The gas valve is found at the bottom of the magazine. To insert this magazine, use an AK-style "rock and lock" method. This means you have to insert the front section of your mag first, then "rock" your magazine back to lock it in place in your Saiga-12K.

The magazine can be removed from its polymer shell to view the internals and see the internal temperature sticker, this sticker shows what temperature the magazine is. To remove the polymer shell, press the button located at the rear of the magazine, then pull the shell from the internal magazine

A replacement magazine for the WE Europe Little Bird pistol collection. The magazine is constructed from Alloy, and is finished matte black.

A 26rnd CO2 powered magazine for ASG's latest generation of the CZ Shadow pistol, which is compatible with the original SP-01 as well as the Shadow 2, and accepts a CO2 bulb via the threaded cap on the bottom.

Want a higher capacity for your GTP9, but don't want to be slowed down by the extra weight?

G&G have revised their original design with a 50 round, extended pistol mag that is now 46% lighter, keeping you fast and agile and helping to keep your reload buttery smooth every time.

A replacement Airsoft gas magazine for the WE Europe Browning Hi-Power. The magazine is constructed from Alloy, with Alloy feed lips and base. The magazine has a 20 round capacity.

A replacement magazine for EX Series PX4 Style WE Airsoft gas blowback pistols.

If you're looking for magazines for your Army Armament R36 GBBR or WE G39C AR36 GBBR go no further as you have found them! This magazine fits these rifles ONLY and is not compatible with other brands AR36 varients. It has a realistic weight and ammo capacity, making it perfect for military operation enthusiasts or those who like to skirmish as realistically as possible.

The mag is constructed with a high-density polymer shell with alloy internals and is loaded through the feed lips at the top of the mag body with a speed loader, preferably with a GBB adapter. The gas fill valve is on the bottom of the magazine and requires the polymer bottom cover to be slid off for access. The magazine is compatible with both green gas and red gas, ready for most weather conditions.

The polymer shell also features grooves on either side, which allow multiple magazines to be attached to one another for easier storage or faster reloads. keep your R36 in the fight for longer with some spare magazines and outgun all your opponents on the battlefield. This trusty mag is sure to withstand even the harshest of skirmishing conditions.

If you have a GBB SCW-9 SMG and you need a spare magazine, this is for you! This magazine has a translucent polymer shell with realistic-looking faux bullets behind it. This gives it a very realistic look for all of you who enjoy your realism. The magazine holds a total of 45 BBs, a more realistic capacity compared to most common AEG magazines.

To load the Maruyama 45rnd Magazine For SCW-9, use a speedloader, preferably with a gas magazine attachment, on the feed lips. The gas inlet valve can be found on the bottom of the magazine and is constructed from brass, like most other inlet valves.

If you're running a WE GBBR, whether it's the SCAR-L, L85/SA80, Type 91, Keltec PLR-16, KAC PDW or M4 variant, this is the mag you need to keep it well-fed! Constructed with a steel shell, alloy/polymer internals and brass valves, this magazine is designed for WE Open Bolt GBBRs and holds 30 BBs filled through the feed lips, either with a speed loader or by hand. 

With wide compatibility and a strong but relatively light build, these magazines even allow you to switch off the "bolt lock" function using the catch on the top, meaning you can dry fire for a laugh or to practice weapons handling without holding the bolt catch while doing it. Compatibility-wise, these are strictly for WE Open Bolt GBBR rifles but will work in any WE Open Bolt GBBR which takes STANAG-style mags.