Airsoft Magazines

A gas blow back magazine made by VORSK for their 1911 MEU and VX-9 Series of Airsoft Pistols. The magazine is constructed with an alloy body and polymer base plate, and holds up to 36 rounds. The magazine is an extended variant of the magazine which comes with the pistol, and great for those who want the original magazines with a higher capacity to go with the pistol. The magazine is filled with BBs from the front or from the top using an Airsoft speed loader, and filled with gas from the bottom via a standard Airsoft Green Gas bottle. 

If you're looking to bolster your VORSK 1911 MEU or VX-9 pistol magazine collection with 100% compatible magazines then this is the way to go. 

If you're looking to load up in one go with a full complement of high quality mid-caps, EMG's Daniel Defense Mid-Cap mags are some of the best out there. These magazines are styled after the real 32rnd DD M4 Magazines, complete with an increased capacity of 230 BBs and a high-vis yellow fill/feed port to mimic the high-vis follower of the real thing, and to ensure you don't insert the mag backwards!

These magazines are designed to be compatible with high-speed builds, so if your AEG demands a high quality magazine to keep up with its appetite, these will do the trick. Just like any other Airsoft mid-cap, loading these mags is done through the fill/feed port on the top of the magazine with an Airsoft speed loader or loading tool. These magazines are designed for the M4/AR-15 AEG platform but have also been designed with universal compatibility in mind, so they should also fit most SCAR-L, 416, L85 and other AEGs with M4 mag compatibility. 

As a bonus, the DD mag design sports a grippy texture on the sides, the front and the rear to assist in wet weather operations and a loop on the baseplate for "mag-podding" or attaching a paracord pull assist. With official licencing, high quality build, massive capacity for a mid-cap and no battle rattle to give you away, these magazines will see you well equipped to face down with high-cap users while nearly doubling the capacity of your usual 130rnd mid-cap!

If you want a full loadout of many, many magazines, but you don't want to be weighed down by pouches full of unnecessary steel, the NUPROL Essentials 140rnd Mid-cap for AK AEGs would be perfect for you. This magazine is styled after the original AK47 7.62x39mm steel magazine but is constructed from lightweight polymer so you can carry ten and still remain agile. 

The magazine holds 140 BBs and can be loaded through the fill/feed port at the top of the magazine body using an Airsoft speed loader or loading rod/tool. This magazine is a 7.62 style mag, and is most appropriately used in 7.62mm AK replicas such as the original AK47, the AKM and the AIMS, but will fit and feed in most Airsoft AK AEG rifles (see Features for detailed compatibility). 

For those of you looking for a mid-cap magazine, but still want to hold a substantial amount of BBs to reduce reloads this magazine is what you're looking for.

Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.

The mag features a checked ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout.

For those of you looking for a mid-cap magazine, but still want to hold a substantial amount of BBs to reduce reloads this magazine is what you're looking for.

Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.

The mag features a checked ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout.

This is a spare or replacement Magazine for the Krytac KRISS Vector Airsoft Electric Gun, constructed from Polymer and holding a total of 95rnds. It is filled using a Speedloader to feed BBs in through the top of the Magazine, and will feed until empty with zero rattle. Being a Krytac official Magazine, it features all the trademarks it should, as well as a mock capacity-indents like you would see on the real thing.

If you run a G3 platform AEG and you need mags with no rattle and decent capacity, Fuxing has you covered! This magazine is constructed with a steel shell and polymer internals and is a copy of the most common G3 magazine style seen in the real steel world. The externals include an over-insertion stop on each side and reinforcing ribs giving it a realistic look, and on the inside this is a spring-loaded mid-cap mag, meaning no battle rattle as you move!

The magazine can be loaded through the fill/feed port at the top of the magazine body using a speedloader or loading tool and holds a very respectable 150 BBs; more than enough to keep pace with the M4 and AK users. These mags should fit any Tokyo Marui clone G3 AEG platform, including the G3A3, G3A4, G3 SAS, MC51 and PSG1. Compatibility with the LCT G3 series is yet to be confirmed.

If you need to load up on magazines for your SMG-7 AEP, but you don't want the "battle rattle" from using high capacity magazines, you'll need a few of these! The 100rnd Mid-cap magazine for the well R4 is constructed with a steel upper shell and feed spring, and a polymer lower shell with polymer internals. The magazine includes "4.6x30" stamped markings on the left side of the shell and realistic reinforcement ribs along the sides of the upper shell. This magazine holds 100 6mm BBs and can be fed through the feed/fill port at the top of the magazine using a standard Airsoft speed loader. The magazine is designed for the Well R4 but should work in most SMG-7 AEPs. 

If you're working on a modern tactical AK build, this is the ideal magazine to complete it! The CYMA 150rnd Bulgarian 5.56 Style Mid-Cap for AK47/74 AEG is constructed from brown tinted translucent polymer with a ribbed external design, showcasing mock cartridges inside for visual realism. 

Being an Airsoft mid-cap magazine, this mag holds 150 BBs loaded through the fill/feed port on the top of the magazine body using a speed loader or loading tool. Thanks to its spring-loaded internals, this magazine won't rattle as you run, making it perfect for stealthy playstyles. Whether you're building a 5.56 style AK or you run a modernised AK bristling with modern accessories and upgrades, complete your build with the CYMA 150rnd Bulgarian 5.56 Style Mid-Cap for AK47/74 AEG!

If you're rocking a BAR to bring that old-school-cool vibe to your local site, these mags will keep you in the action for longer! The S&T 140rnd Mid-Cap Magazine For M1918 BAR AEG is specifically designed for the S&T 1918 Browning Automatic Rifle (BAR) AEG and is constructed with a steel shell, polymer internals and a steel feed spring. 

Like other Airsoft mid-caps, this BAR mag is loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod. Replicating the real BAR magazine, these mags are rather massive. We recommend specific BAR magazine pouches for these beasts, preferably replica WW2 kit!

If you need mags to keep your Grease Gun AEG in the game, these are the ones! The Snow Wolf 130rnd Mid-Cap Magazine for SW-06 M3A1 AEG is constructed with a steel shell, polymer internals and a steel feed spring, holding 130 BBs with no battle rattle or winding wheel to worry about! 

Like other Airsoft mid-caps, this mag is loaded through the fill/feed port at the top of the magazine body using a speed loader or loading tool. Compatibility-wise, these mags are for the Snow Wolf M3 and M3A1 Grease Gun AEGs and are unlikely to work with other brands. Whether you run a WW2 loadout with a Grease Gun or a Desert Storm loadout with the same, these mags belong in your rig!

If you have dreams of building an old school SMG-5 but you can't find the right mags, get them here while they last! The CYMA 120rnd Old School Straight Mid-cap Magazine for SMG-5 AEG Series matches the real steel early style of SMG-5 magazine perfectly, including its straight body design, reinforcement ribs and steel shell construction.

These mags are mid-caps, meaning no battle rattle as you go room to room with your SMG-5 doing what it does best, and should be compatible with practically any SMG-5 AEG platform out there. The mags can be loaded through the fill/feed port at the top of the magazine body using a standard Airsoft speedloader or loading rod and hold 120BBs, a respectable capacity for such a compact magazine design. If you have your old school handguard and your Maglite ready, finish your build off with these old school straight mags!

If you have an AK with an incredible rate of fire, you will need some enhanced magazines to keep up! Introducing the TPM-AK, the latest enhanced magazine from PTS Syndicate, the number 1 name in high performance Airsoft magazines. The TPM-AK is compatible with practically any AK AEG but is styled after 5.56mm AK magazines available on the civilian market in the US. This magazine is a spring fed mid-cap and can be loaded using a speedloader through the fill/feed port on the top of the mag.

An Airsoft Medium Capacity Magazine that is ideal for the Airsofter wanting to inject a little more realism into their Skirmishing style. Loosely inspired by the design of modern P-Mag type magazines, this is G&Gs attempt at creating a lightweight and uniquely styled magazine for STANAG Magazine compatible Airsoft Guns, such as the M4 and M16.

If you're running the OG assault rifle, the MP-44 from AGM or Cybergun, these magazines are what you need to keep the kills coming. The AGM 190rnd Mid-Cap Magazine for AGM MP-44 AEG is constructed with a steel shell and polymer internals and is loaded through the fill/feed port at the top of the magazine body using a speed loader or loading tool. 

Compatiblity-wise, this magazine works in the AGM and Cybergun MP-44 AEGs, and its impressive 190 BB capacity with no winding wheel or battle rattle to worry about makes this the best MP-44 AEG mag for skirmishing!

If you are running the Double Eagle DEK762 and you want mags that match the original, you just found them! The Double Eagle 130rnd 7.62x39 Style Mid-Cap Magazine for M4/AR-15 AEG is styled after real steel 7.62x39mm AR magazines, making it a perfect fit for the DEK762 but also compatible with most M4/AR-15 AEGs.

The magazine is constructed with a steel shell, polymer internals and a steel feed spring, showcasing mock reinforcement ribs stamped into each side. This mag is also quite short for a 130-round mag, allowing you to get closer to the ground when shooting from the prone position and make better use of surrounding cover. As with other Airsoft mid-caps, the 7.62x39 style magazine is loaded through the fill/feed port at the top of the magazine body using a speed loader or loading tool. Whether you own the DEK762 or you want to add an unconventional look to your M4/AR-15 AEG, this mag is perfect for the job!

If you need some big mags for your big boy AR, the SR25, this should do the job! The NUPROL 130rnd W-Mag Mid-Cap for SR25 is styled to suit modern setups and has a rubberised baseplate for extra grip during a reload and also allows for the "mag podding" technique to be used on smooth surfaces. This mag is a windowed design, meaning it has mock witness windows on either side showing mock 7.62x51mm cartridges inside for a realistic look. The magazine can be filled through the fill/feed port at the top of the magazine body using an Airsoft speed loader or loading rod.

This magazine is compatible with the Classic Army pattern of SR25, meaning it should work in the A&K and CYMA SR25 rifles as well, but will not fit ARES/Secutor or G&G patterns. The style of this magazine is a great fit for any modern SR25 platform and has a waffle textured surface for enhanced grip and strength, and a "dot matrix" at the bottom on each side so you can numerically mark your magazines.

If you need some big mags for your big boy AR, the SR25, this should do the job! The NUPROL 130rnd W-Mag Mid-Cap for SR25 is styled to suit modern setups and has a rubberised baseplate for extra grip during a reload and also allows for the "mag podding" technique to be used on smooth surfaces. This mag is a windowed design, meaning it has mock witness windows on either side showing mock 7.62x51mm cartridges inside for a realistic look. The magazine can be filled through the fill/feed port at the top of the magazine body using an Airsoft speed loader or loading rod.

This magazine is compatible with the Classic Army pattern of SR25, meaning it should work in the A&K and CYMA SR25 rifles as well, but will not fit ARES/Secutor or G&G patterns. The style of this magazine is a great fit for any modern SR25 platform and has a waffle textured surface for enhanced grip and strength, and a "dot matrix" at the bottom on each side so you can numerically mark your magazines.

If you want a long-boi magazine for your B9 AEP but you hate battle rattle giving you away, this mag was made to meet your needs! The CYMA 80rnd Long Mid-cap Magazine For CM.132/126 B9 AEP follows the external format of the CYMA AEP High-caps but is a rattle-free spring loaded mid-cap which should keep those with a more sneaky playstyle at the top of their game.

The magazine is loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod and holds 80 6mm Airsoft BBs; a significant increase over the standard AEP magazine. Compatibility-wise, this magazine is suitable for the CYMA CM.126, CM.126S, CM.132 and CM.132S B9 style AEPs and is unlikely to work in other designs.

A Three Pack of Medium Capacity Magazines designed exclusively for the Airsoft Krytac Kriss Vector AEG, created by KRYTAC and officially licensed by KRISS.

For those of you looking for an ultra-modern styled mid cap, this is the one you're after!

Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.

The mag features a check and dot pattern ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout.

For those of you looking for an ultra-modern styled mid cap, this is the one you're after!

Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.

The mag features a check and dot pattern ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout.

If you are looking for mid-caps with a bigger-than-average capacity the EMG 210rnd Strike Industries Polymer Magazine for M4/AR-15 AEG fits the bill! These magazines are constructed from seriously solid high density polymer with a steel feed spring and a high-vis orange follower so you can easily see when you are fresh out of ammo.

Being officially licenced by Strike Industries, this magazine is a near 1:1 copy of the real Strike Industries "Strike Mag MK1" and is not shy about its brand pedigree, with subtle licenced trademarks across the design as well as realistic 5.56x45 calibre markings. If you are looking for a more realistic alternative to the PTS EPM magazine, this would be a great choice!

A Mid-Cap Magazine for SR-25 / AR-10 Platform Rifles that accept a 7.62x51mm STANAG Magazine. It is a Spring Powered Magazine that is filled using a Speedloader, and will feed until empty without any rattle. With a Steel Outer Shell, this is a seriously strong and realistic Magazine, which is perfect for staying in the fight for longer without refilling. As an added bonus, it is compatible with CYMA, A&K as well as Tokyo Marui branded Rifles.

If you are rocking the EC-202, EC-203 or EC-204 you will need some mags to keep it doing what it does best. The East Crane 110rnd Mid-Cap Magazine for EC-202/203/204 AEG is constructed with a transparent polymer shell and a steel feed spring, showcasing detailed mock 7.62x51mm cartridges inside for that realistic look. This mag is compatible with the EC-202, EC-203 and EC-204 AEG series but will not fit other 417-style Airsoft guns. 

This is a mid-cap magazine, meaning it is loaded through the fill/feed port at the top of the mag using a speed loader or loading rod. Thanks to its spring-loaded design you will never experience the dreaded battle rattle while carrying this mag, making it great for milsim skirmishers and those who prioritise stealth!

If you need AR36 AEG mags, these should do the trick! The CYMA 150rnd Mid-Cap Magazine for AR36/SL8 AEG fits both AR36 and SL8/9 platform AEGs and is constructed from a translucent brown polymer, just like the real thing. Each magazine holds 150 BBs and can be loaded from the top using an Airsoft speed loader or loading tool.

The external design of the magazine matches that of the real rifle, including a reinforcement rib on the front and an over-insertion preventing ledge, meaning even if you slap this magazine home quite hard, it won't damage your HOP-up unit. On each side of each mag, there are magazine linking lugs which can be used to connect two or more mags together, allowing for faster reloads "redi-mag" style and keeping a second magazine handy and allowing you to get back in the fight without having to fumble with pouches.

An Airsoft medium capacity magazine that is ideal for the Airsofter wanting to inject a little more realism into their skirmishing style. Loosely inspired by the design of modern P-Mag type magazines, this is G&Gs attempt at creating a lightweight and uniquely styled magazine for STANAG magazine compatible Airsoft guns.

If you have an SMG-5 and have caught straight mag fever no need to fret, we have the cure! The CYMA 120rnd Straight Mid-Cap Magazine For SMG-5/CM.106 AEG will give your SMG-5 AEG a whole new look similar to the legendary MP5-10, the 10mm version of the iconic SMG we all know and love.

These magazines are constructed with a steel shell, polymer internals and a steel feed spring and can be loaded with a speedloader or loading rod through the fill/feed port on the top of the magazine body. Compatibility-wise, these mags should work in the vast majority of SMG-5 AEGs out there, the CYMA CM.106 AR-9 AEG and most SMG-5/MP5 HPA magazine adapters for pistols. If you need a new look and new mags for your SMG-5 you can now hit two targets with a single BB!

This is the G&G metal Airsoft medium capacity magazine that is ideal for the Airsofter wanting to experience a little more realism into their Skirmishing style. The mag features full metal construction with a medium 125rnd capacity for STANAG Magazine compatible Airsoft Guns, such as the M4 and M16.

A Co2 Powered Gas Blowback Airsoft Pistol Magazine designed for use with the NUPROL RAVEN Range of MEU 1911 Pistols. An alternative to the Green Gas model of the magazine, and packs a much more powerful punch.