- 500rnd Capacity
- Steel shell
- For Cybergun FN Herstal SCAR-H
If you are rocking the FN Herstal licensed SCAR-H AEG from Cybergun then you will need some iconic mags to go with it! The Cybergun 500rnd High Capacity magazine is intended for the Cybergun FN Herstal SCAR-H AEG and is a wheel wound high-capacity magazine. The wheel is located at the bottom of the magazine, and the fill window is on the top. All you need to do to ready this mag for battle is fill it up with BBs through the fill window, then wind the magazine using the wheel on the base plate.
This magazine has a steel shell and polymer internals, giving it a realistic feel and high strength. It comes in both tan and black so you can match it to the colour of your Scar-H and it won't stick out like a sore thumb!
- 500rnd Capacity
- Steel shell
- For Cybergun FN Herstal SCAR-H
If you are rocking the FN Herstal licensed SCAR-H AEG from Cybergun then you will need some iconic mags to go with it! The Cybergun 500rnd High Capacity magazine is intended for the Cybergun FN Herstal SCAR-H AEG and is a wheel wound high-capacity magazine. The wheel is located at the bottom of the magazine, and the fill window is on the top. All you need to do to ready this mag for battle is fill it up with BBs through the fill window, then wind the magazine using the wheel on the base plate.
This magazine has a steel shell and polymer internals, giving it a realistic feel and high strength. It comes in both tan and black so you can match it to the colour of your Scar-H and it won't stick out like a sore thumb!
- 50rnd capacity
- Steel construction
- Short mag - Ideal for E-11 Blaster builds
If you need short mags for your S&T Sterling or E-11 Blaster custom build, you just found them! The S&T 50rnd Short Mid-Cap Mag for Sterling AEG is constructed with a steel shell, polymer internals and a steel feed spring and is compatible with all S&T Sterling AEG variants, including the E-11 Blaster custom.
As with other Airsoft mid-caps, this mag can be loaded through the fill/feed port on the top of the mag body using a speed loader or loading rod. If you run an S&T Sterling and want more compact mags, here you go!
- Ridged Design
- 260rnd Capacity
- High Cap Magazine
A High Capacity Magazine for the Tokyo Marui Scorpion Mod.M Submachine Gun, that holds a total of 260rnds and is wound from the bottom of the Magazine as per any standard High Cap. To fill the Magazine, simply open the Fill Window at the top/front of the mag and pour your BBs in. Wind the clockwork wheel on the base of the mag to start feeding BBs into your gun.
- Spring Powered Mid-Cap
- Steel Outer Shell
- 160rnd Capacity
A spare magazine for VZ.58 AEGs, externally, this magazine is a close replica of the real steel 30-round 7.62x39mm magazine for the real steel VZ.58. While externally the VZ.58 may closely resemble the AK-47, the real steel variant shares no parts with Kalashnikov Rifles, including the magazines. This magazine has a steel shell housing and polymer internals, it is strong and has extremely reliable feeding. Much like its real steel counterpart, this magazine features the classic ribbed texture adding to the realistic aesthetic and making it easier to handle and manipulate.
As this is a medium capacity (mid-cap) design, it is filled using a speed loader directly into the feed lips, meaning it has great capacity and without any rattle during movement. The ammunition is loaded directly into the Airsoft gun from the magazine's feeding tube using its steel spring, so there is no winding mechanism present on the magazine.
This is the perfect spare magazine for Airsoft VZ.58 replicas if you need more ammo to get the operation done.
- Mid-cap Magazine
- Clear Polymer construction
- Dummy .45 ACP rounds inside
Looking for spare mags for the G&G PCC45? You have found them! Featuring robust clear polymer construction keeping the weight down and dummy round inside for enhanced realism, this is basically the perfect airsoft mag! Who doesn't love the look on their puzzled friends' faces as they wonder how you got a real .45 ACP submachine gun?
- 15rnd Capacity
- Compact Magazine
- For Marui TMPSG-1
This is a 15rnd Short Magazine for the Tokyo Marui TMPSG-1 Sniper Rifle (electric). It is a compact magazine which makes prone shots much easier, and reduces the chance of magazines snagging on your equipment. It is loaded from the top using a Speedloader and is very easy to carry thanks to its' highly compact design.
- 130rnd Capacity
- Textured Externals
- Spring Fed Magazine
This Magazine is designed for M4 / M16 / AR platform Airsoft Electric Guns, and holds a total of 130rnds. Being a Mid-Cap Magazine it will feed until empty and doesn't have the rattle of High Capacity Magazines, but needs a Speedloader to be filled. It has textured externals to improve grip, as well as faux capacity counters for extra realism.
- 40rnd Capacity
- Low-cap design
- For Ares Otto SOC Sniper Rifle AEG
If you need some additional magazines for your Ares Otto Repa SOC SLR Sniper Rifle, look no further! The Ares 40rnd Low-Cap Magazine for SOC Sniper Rifle AEG is designed specifically for this platform, it is constructed from high-density polymer and holds 40 BBs. This might seem like a low capacity but the SOC AEG is a sniper/DMR-type platform and 40rnds will be all you need to get the job done.
The magazine inserts via the "rock and lock" method, requiring that you index the front of the magazine into the well first and rotate the rear up to lock. It features ridged grooves on the sides to aid in gripping, with or without gloves. The magazine is loaded at the top of the mag using a speed loader, its low-cap design means there is no battle rattle when hiding in the bushes!
- Polymer Construction
- High-Cap Magazine
- 550rnd Capacity
A High Capacity Magazine designed and built for the ASG CZ 805 Bren A1 Series of Airsoft 6mm AEG Rifles. The magazine is constructed from Polymer, with a Polymer Shell and Internals.
- 20rnd Capacity
- Speedloader Filled
- Stay in the Fight Longer
A spare or replacement Magazine for the G&G Armament M1 Garand, holding a total of 20rnds and filled using a Speedloader. These lightweight Magazines are easy to carry in bulk, and are an absolute must for an M1 Garand owner who wants to last longer in a skirmish without running out of ammo.
- For G&G SR25
- 50 round Capacity
- Steel External Shell
An Airsoft SR25 6mm BB gun style magazine designed and built by G&G for use with their range of Airsoft Electric Gun SR25 replicas. It holds 50 rounds and is of steel construction.
- 2800rnd Capacity
- Auto winding
- Fits WE23-H, WE23-X & WE23-Plus
If you're treating yourself or punishing the enemy team with the WE23-H Rotary Minigun, this is the mag you need if you have a particularly heavy trigger finger! The WELL PRO 2800rnd Magazine For WE23-H Minigun holds an incredible 2800 BBs and winds itself via the internal motor of the WELL PRO Minigun, meaning no need to do anything but pull the trigger! Compatibility-wise, this is strictly for the bigger WELL PRO Minigun replicas, including the WE23-H, WE23-X and WE-23-Plus but sadly isn't compatible with the WE23-S or WE23-L versions (1200BBs is enough!).
The magazine indexes at the rear and rocks in to lock at the front, similarly to an AK or FAL platform but backwards. The magazine release is located on the front of the mag, taking the form of a button. To fill the mag, you will need to remove the rear plate to expose the fill window by squeezing the two tabs on either side of the central "bar" on the rear plate and removing it, together with its internal spring. Remove the entire assembly, pour your BBs into the mag, reinstall the rear plate and you are ready to shoot!
- 2000rnd Capacity
- For A&K FN MK46 MOD 0 T8 LMG
- Auto winding and sound control features
If you are looking for a second box magazine for longer operations or just because you have trigger-happy tendencies, Battleaxe is here to sort you out! The Battleaxe 2000rnd Box Magazine for T8 MK46 LMG - Sound Control is designed ONLY for the A&K FN MK46 MOD 0 T8 LMG AEG. The fill window of this beast of a magazine can be found at the top on a hinge making it easy to pour entire bottles of BBs in!
The magazine itself is constructed from polymer with a fabric cover, the feed tubes coil up from the box and are made from steel, guaranteeing strength. This magazine boasts both sound control and auto winding mode, meaning you have the choice between winding up the magazine with a flip of a switch or letting it do the winding automatically when it detects your AEG firing. Perfect for those who want to spend more time shooting and less time winding!
Unzip the fabric cover and you will find at the bottom of the magazine there is a switch with three settings and the battery compartment. The central position is the "off" position, pushing the switch into its named position activates either the sound control or "auto-winding" mode respectively. The battery compartment lid comes off and reveals space for a 9V battery, this is crucial for the magazine to function
- 2000rnd Capacity
- For A&K FN MK46 MOD 0 T8 LMG
- Auto winding and sound control features
If you are looking for a second box magazine for longer operations or just because you have trigger-happy tendencies, Battleaxe is here to sort you out! The Battleaxe 2000rnd Box Magazine for T8 MK46 LMG - Sound Control is designed ONLY for the A&K FN MK46 MOD 0 T8 LMG AEG. The fill window of this beast of a magazine can be found at the top on a hinge making it easy to pour entire bottles of BBs in!
The magazine itself is constructed from polymer with a fabric cover, the feed tubes coil up from the box and are made from steel, guaranteeing strength. This magazine boasts both sound control and auto winding mode, meaning you have the choice between winding up the magazine with a flip of a switch or letting it do the winding automatically when it detects your AEG firing. Perfect for those who want to spend more time shooting and less time winding!
Unzip the fabric cover and you will find at the bottom of the magazine there is a switch with three settings and the battery compartment. The central position is the "off" position, pushing the switch into its named position activates either the sound control or "auto-winding" mode respectively. The battery compartment lid comes off and reveals space for a 9V battery, this is crucial for the magazine to function
- High Quality Polymers
- Transparent Internals
- KRISS Trademark
A spare or replacement 50rnd short magazine for the Krytac Kriss Vector, which is made to a high standard with excellent quality Polymers, and features the KRISS trademark as well as faux round count.
- 400rnd Capacity
- Steel construction
- For ICS TOD/IDF Defender AEG
If you're running the ICS TOD aka IDF Defender, load up on these magazines! The 400rnd Steel High-Cap Mag for ICS TOD/IDF Defender AEG offers realistic stamped steel construction for a realistically hefty feel, the perfect pairing for the highly realistic ICS IDF Defender.
Like other wheel-wound Airsoft high-cap magazines, this mag is filled through the fill window on the top of the mag body by opening the hatch and pouring BBs straight in. With this done, close the hatch, wind the winding wheel on the baseplate 5-10 times or until the magazine is properly tensioned (listen out for the clicking noise made by the winding wheel changing) and you are ready to rock. If feeding ceases, wind the wheel again to get it feeding once again. If you're rocking the ICS IDF Defender, these are the mags you need!
- Dupont Zytel
- Redesigned Follower
- 'Fuel Gauge' Indicator
The world's best Airsoft Magazine just got better! Made to a seriously tough standard using excellent materials, the EPM-1 Magazine holds a massive 250rnds in a Spring-Fed Mid-Cap design. This means that you still get the incredible feeding performance of a PTS Mid-Cap, but with a capacity that can rival most High-Cap Magazines!
- 150rnd Capacity
- Rubber Baseplate
- Mock Bullet Window
This Magazine is designed for Airsoft M4/AR Platform Electric Guns, and features a gorgeous, modern design with Mock Bullet Window and Thick Rubber Baseplate. It holds a total of 150rnds and is filled from the top using a Speedloader. If you need an ultra modern Magazine to finish off your Custom M4 build, then the Battleaxe 150rnd Mid-Cap Polymer Magazine for AR-15/M4 is the ideal choice.
- 170 Rounds
- Ergonomic deisgn
- PTS Trades
Another excellent quality product from PTS, a 170rd Mid Cap magazine for those of you looking for a more low profile but reliable magazine option.
- 450rnd Capacity
- Extended 40rnd style design
- For M4/AR15 AEG Rifles
Looking for an interesting mag for your M4? The NUPROL 450rnd H-Mag High-Cap is designed for the M4/AR15 AEG but should work in most compatible platforms, and is an extended 40rnd style magazine which gives your primary a more beastly, aggressive look. The magazine is a wheel wound high-cap with its winding wheel located on the baseplate and is filled via the fill window at the top of the magazine body.
Either side of the magazine has a modern hex style texture to provide extra grip when pulling the magazine from a pouch and also has 5.56x45mm markings recessed into the design to add a realistic look. This mag would pair well with any M4/AR15 AEG setup with a cutting edge look!
- 450rnd Capacity
- Extended 40rnd style design
- For M4/AR15 AEG Rifles
Looking for an interesting mag for your M4? The NUPROL 450rnd H-Mag High-Cap is designed for the M4/AR15 AEG but should work in most compatible platforms, and is an extended 40rnd style magazine which gives your primary a more beastly, aggressive look. The magazine is a wheel wound high-cap with its winding wheel located on the baseplate and is filled via the fill window at the top of the magazine body.
Either side of the magazine has a modern hex style texture to provide extra grip when pulling the magazine from a pouch and also has 5.56x45mm markings recessed into the design to add a realistic look. This mag would pair well with any M4/AR15 AEG setup with a cutting edge look!
- Check and dot pattern texture
- 140rnd Capacity
- For M4/AR15/SCAR-L/416 AEGs
For those of you looking for an ultra modern styled STANAG magazine this is what you're looking for.
Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.
The mag features a check and dot pattern ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout.
- 380rnd Capacity
- Hex pattern design
- For M4/AR15 AEG Rifle
Looking for a unqiue modern mag for your M4? The NUPROL 380rnd H-Mag High-Cap is designed for the M4/AR15 AEG but should work in most compatible platforms and has an ultra-modern look thanks to its hex pattern texture. The magazine is a wheel wound high-cap with its winding wheel located on the baseplate and is filled via the fill window at the top of the magazine body.
Either side of the magazine has a modern hex style texture to provide extra grip when pulling the magazine from a pouch and also has 5.56x45mm markings recessed into the design to add a realistic look. This mag would pair well with any M4/AR15 AEG setup with a cutting edge look!
- 100rnd Capacity
- High density polymer construction
- Compatible with Specna Arms SA-X series
If you're looking for spare magazines for your SA-X series SMG, you have found them! The 100rnd S-MAG Mid-Cap for SA-X & SA-FX series is constructed from high density polymer with a steel feed spring and is designed to keep up with high rate of fire platforms like the ASTER-equipped SA-X01 and SA-X02.
The magazine can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod and holds 100bbs with no battle rattle whatsoever. The sides of the magazine are textured with small Specna Arms logos to provide extra grip when pulling the mag from a pouch, and the baseplate is enlarged to assist with handling. If you have treated yourself to an SA-X or SA-FX series SMG you need some of these given how quickly these things can empty a mag!
- 100rnd Capacity
- High density polymer construction
- Compatible with Specna Arms SA-X series
If you're looking for spare magazines for your SA-X series SMG, you have found them! The 100rnd S-MAG Mid-Cap for SA-X & SA-FX series is constructed from high density polymer with a steel feed spring and is designed to keep up with high rate of fire platforms like the ASTER-equipped SA-X01 and SA-X02.
The magazine can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod and holds 100bbs with no battle rattle whatsoever. The sides of the magazine are textured with small Specna Arms logos to provide extra grip when pulling the mag from a pouch, and the baseplate is enlarged to assist with handling. If you have treated yourself to an SA-X or SA-FX series SMG you need some of these given how quickly these things can empty a mag!
- 100rnd Capacity
- High density polymer construction
- Compatible with Specna Arms SA-X series
If you're looking for spare magazines for your SA-X series SMG, you have found them! The 100rnd S-MAG Mid-Cap for SA-X & SA-FX series is constructed from high density polymer with a steel feed spring and is designed to keep up with high rate of fire platforms like the ASTER-equipped SA-X01 and SA-X02.
The magazine can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod and holds 100bbs with no battle rattle whatsoever. The sides of the magazine are textured with small Specna Arms logos to provide extra grip when pulling the mag from a pouch, and the baseplate is enlarged to assist with handling. If you have treated yourself to an SA-X or SA-FX series SMG you need some of these given how quickly these things can empty a mag!
- Incredibly Robust Build
- Large Winding Front
- 1500rnd Capacity
The perfect magazine to give you the ultimate fire-power and suppression from your G&G AP-9 AEG. Incredibly satisfying to hold and use thanks to the very thick and robust polymer construction.
- 200rnd Capacity
- Extended design
- For M4/AR15 AEG series
Looking for the biggest capacity with no rattle? This NUPROL 200rnd Mid-cap is an extended design, allowing an extra 70 BBs to squeeze in when compared to 30 round style mags. Its spring-loaded mechanism means you will be able to sneak around with ease with none of the tell-tale "battle rattle" you would have from high-capacity mags, and benefit from some extra firepower at the same time! This magazine is loaded just like any other Airsoft mid-cap, using a speed loader or loading rod through the fill/feed port at the top of the magazine body. The added benefit of this mag is its much more aggressive 40-round style design, which gives your rifle the "big boy" look of extra capacity, making it that more intimidating to face down with on the skirmish field.
- 380rnd Capacity
- High density polymer construction
- Compatible with most M4/AR-15 AEGs
If you need more ammo on tap and ain't got time to reload, the Specna Arms 380rnd S-Mag High-Cap Magazine for M4/AR-15 AEG is what you need to fill your rig up! This wheel-wound high-cap magazine holds a respectable 380 BBs, loaded through the fill window at the top and fed into your M4/AR-15 AEG via the winding wheel on the baseplate. Simply open the BB fill window door, pour your BBs in and wind the wheel 10-15 times, after which you are ready to shoot.
Like the S-Mag mid-cap, the high-cap variant is constructed from high density polymer and boasts SA texture on each side to improve wet weather handling. If you want to spend more time shooting and less time reloading, the S-Mag high-cap will perfectly suit your needs!
About Our Airsoft Magazines
Mag up and shop low, mid and high capacity magazines for all airsoft guns.
Polymer, full metal, low to high capacity we have you covered for every kind of airsoft gun from pistol magazines to SMG magazines. Remember, you can never have enough magazines! Plus, take advantage of our bulk deals and save money.
We have every magazine from your standard AEG to SYSTEMA PTW and MARUI Recoil Shock series that stop your AEG or PTW from firing once the magazine is empty. We also stock a range of flash magazines that are wound up using a pull cord system. This allows for them to be wound faster and easier, especially whilst wearing gloves. And when you need to discard the mag mid-battle? Shop our magazine pouches or dump pouches.