All External Airsoft Parts & Attachments

A short and compact KeyMod foregrip, designed to be attached to KeyMod Railed Hand Guards to provide an additional control when handling your Airsoft weapon. 

A short and compact KeyMod foregrip, designed to be attached to KeyMod Railed Hand Guards to provide an additional control when handling your Airsoft weapon. 

If you have had a mishap and scratched the lower receiver of your ARCTURUS full metal M4 platform we have just what you need to make it pretty again! The ARCTURUS alloy Lower Receiver For M4/AR15 AEG is an original replacement part for the ARCTURUS full metal M4 AEG series intended to replace a scratched or otherwise damaged lower. The lower receiver doesn't include any of the controls, body pins or trim parts so you will need these parts from your original lower to complete it.

Compatibility wise this part is intended only for the ARCTURUS full metal M4/AR15 AEG line and is unlikely to work with other brands' upper receivers.

A Scope Ring for compatible Riflescopes, which will help you mount your Riflescope to perfection, eliminating potential error caused by mounting your Sight by hand. If you're a stickler for precision, then there's no excuse to not be using these rings on your rifle.

A Scope Ring for compatible Riflescopes, which will help you mount your Riflescope to perfection, eliminating potential error caused by mounting your Sight by hand. If you're a stickler for precision, then there's no excuse to not be using these rings on your rifle.

Looking for fast access to the selector switch on your AAP-01? So are we! Thankfully, TTi, being the innovators they are have invented the perfect solution! The Competition Charging Handle with selector switch combines an extended charging handle with an extended rotary selector switch which allows you to change fire modes in a flash without needing to lock the bolt open and break fingernails. This is the aftermarket part the AAP always needed!

A replacement Grip and Cheek Pad Replacement set which allows you to replace the stock parts with upgraded parts. 

If you love the slim feel of your KeyMod handguard, but it is a bit sharp, and a bit cold to grip during winter? G&G have the solution! These KeyMod rail cover panels are constructed from high-density polymer and feature a hexagonal texture on their surfaces to provide enhanced control over your KeyMod handguard in poor weather conditions and help prevent accidental cheese grating action from the KeyMod slots! The covers can be mounted quickly, with no need for tools, and are a great way to add comfort to your KeyMod setup or provide a visible and tactile index point to encourage a consistent grip on the rifle. The set includes 4 cover panels of 10cm in length which can also be cut down to cover smaller KeyMod surfaces if needed. Please note, we cannot accept returns on any rail panels which have been cut down.

If you would like your reload speed to increase in line with the speed of your AAP-01 pistol, an extended magazine catch will help get you there! Introducing the Action Army AAP-01 Aluminium extended mag release, a drop in replacement for your original polymer magazine catch which comes with an optional extension piece, intended to give you a split second increase in your reload times and allow easier access to the magazine catch when operating under pressure.

The Monk outer barrels are build for super lightweight set-ups!

By using nylon and carbon fibre the outer barrels weighs in at only around 30 grams! It is the most lightweight outer barrel on the market today.

This outer barrel is compatible with the Monk GO Series, Monk OG Series and all other M4 series.

The Monk outer barrels are build for super lightweight set-ups!

By using nylon and carbon fibre the outer barrels weighs in at only around 30 grams! It is the most lightweight outer barrel on the market today.

This outer barrel is compatible with the Monk GO Series, Monk OG Series and all other M4 series.

The Monk outer barrels are build for super lightweight set-ups!

By using nylon and carbon fibre the outer barrels weighs in at only around 30 grams! It is the most lightweight outer barrel on the market today.

This outer barrel is compatible with the Monk GO Series, Monk OG Series and all other M4 series.

The Monk outer barrels are build for super lightweight set-ups!

By using nylon and carbon fibre the outer barrels weighs in at only around 30 grams! It is the most lightweight outer barrel on the market today.

This outer barrel is compatible with the Monk GO Series, Monk OG Series and all other M4 series.

The Monk outer barrels are build for super lightweight set-ups!

By using nylon and carbon fibre the outer barrels weighs in at only around 30 grams! It is the most lightweight outer barrel on the market today.

This outer barrel is compatible with the Monk GO Series, Monk OG Series and all other M4 series.

The Monk outer barrels are build for super lightweight set-ups!

By using nylon and carbon fibre the outer barrels weighs in at only around 30 grams! It is the most lightweight outer barrel on the market today.

This outer barrel is compatible with the Monk GO Series, Monk OG Series and all other M4 series.

If you're looking for a way to make your giant G3 AEG more compact, the Jing Gong Sliding Stock for G3 AEGs will do the trick! Designed to fit Jing Gong and Tokyo Marui G3 AEGs, this stock offers 2 positions of adjustment. The stock can be deployed by pushing the adjustment lever on the bottom towards the left, after which it can be pulled out and into place. 

The stock base and butt plate are constructed from high density polymer and the stock bars are alloy, keeping weight to a minimum and providing strength where needed. The butt plate boasts deep serrations for optimal grip in any weather conditions and the stock base includes a sling loop for conventional strap slings. Whether you're working on a G3A4 build or you want to fit your G3 into a smaller gun bag, the Jing Gong Sliding Stock for G3 AEGs is ideal!

If your primary is a SigAir MPX, MCX or has a 1913 Picatinny stock adapter you now have one more stock option thanks to Laylax! The Lightweight M4/AR-15 Stock Tube Adapter is designed to mount to a 1913/20mm Picatinny stock adapter or the built-in 1913 stock mount on the MPX and MCX platforms and provides a 6-position M4/AR-15 buffer tube constructed from aluminium, ready for any M4/AR-15 sliding stock you fancy. 

The buffer tube is machined to allow for wire routing in rear-wired setups and has a threaded rear cap to keep your battery well clear of dirt and debris. The main perk of this stock adapter is its remarkably low weight, tipping the scales at a mere 140g thanks to its aluminium construction. If you want a more conventional stock option for your 1913/20mm Picatinny stock equipped AEG or GBBR this is perfect for the job!

Turn your regular airsoft rifle into a DMR-ready monster with the Novritsch DMR Stock. It doesn't only look the tactical part, but it also features a fully adjustable and modular cheek rest so you can line up the perfect shot without the neck pain! This is a must-have for any semi-auto skirmisher who wants a stock that will ensure the edge over their opponent. It is designed to fit over a regular AR/M4/M16 buffer tube, both electric and gas-powered rifles.

What better way to finish of a capa, then with an Aluminium Grip! 

Mostly aluminium construction with Steel Mag catch and screws.

You're not going to want to miss out on these!!

*Standard magwells do not fit on these grips

What better way to finish of a capa, then with an Aluminium Grip! 

Mostly aluminium construction with Steel Mag catch and screws.

You're not going to want to miss out on these!!

*Standard magwells do not fit on these grips

What better way to finish of a capa, then with an Aluminium Grip! 

Mostly aluminium construction with Steel Mag catch and screws.

You're not going to want to miss out on these!!

*Standard magwells do not fit on these grips

What better way to finish of a capa, then with an Aluminium Grip! 

Mostly aluminium construction with Steel Mag catch and screws.

You're not going to want to miss out on these!!

*Standard magwells do not fit on these grips

What better way to finish of a capa, then with an Aluminium Grip! 

Mostly aluminium construction with Steel Mag catch and screws.

You're not going to want to miss out on these!!

*Standard magwells do not fit on these grips

What better way to finish of a capa, then with an Aluminium Grip! 

Mostly aluminium construction with Steel Mag catch and screws.

You're not going to want to miss out on these!!

*Standard magwells do not fit on these grips

A set of ten Rubber rail panels for KeyMod rail systems, which provides a protective and grippy surface to improve handling over the weapon, even when using gloves.

If you have switched out the handguard or outer barrel on your M4/AR15 and now it wobbles you need Laylax's barrel shims to firm it up! These shims are basically small discs of aluminium which can be sandwiched between the outer barrel and upper receiver to adjust the fit with various different barrel nuts. If you are building an M4 platform, be it an AEG or GBBR, these handy shims are essential to have in the toolbox if you want a new handguard or outer barrel to fit perfectly at the right place with no wobble whatsoever.

A Foregrip for 20mm Rail Systems, that will install anywhere on 20mm RIS/RAS and provide a comfortable and stable point to grip your replica. The Grip has a cutout on the side for Pressure Pads, should you be running a Torch or Laser. The Grip is easily installed onto Rails by pulling down the Spring-Loaded Tabs at the top of the Grip and sliding it into position. With ridges on the externals, this Grip offers a great hold even when wearing gloves.

Worried your red dot sight or scope will take a hit and be destroyed when skirmishing? A reasonable concern, for sure! When exchanging fire with the enemy the one item that is guaranteed to be at the most risk of getting hit is your gun, and anything mounted on it, as such we always advise you make use of a lens protector to avoid disappointment and extra expense! The Specna Arms Lens protector mounts to any 20mm Picatinny rail and provides a protective lens of approximately 5cmx5.5cm, with an alternative yellow tinted lens provided in the box.

This minimalistic hand stop provides you with a secure grip on your rifle for excellent handling and faster transitions during your skirmishes. It is constructed from a lightweight alloy, which makes it strong and bump-resistant but doesn't add lots of extra weight to your platform. The hand stop ensures that you are always gripping your gun at the exact same spot, so you can operate your rifle with surgical precision from muscle memory.

This Hand stop attaches to your handguard via an M-LOK mounting system. Attach it on your platform to prevent the shooting hand from reaching past the handguard to the muzzle. It also gives you a superior grip during wet weather skirmishing as it is designed specifically to fit the shape of your hand.

The Novritsch Angled Hand Stop is a great choice for those Airsofters who find it hard to judge the length of their rifle or want to quickly find their correct shooting position in the heat of the battle.

An Aluminium Alloy constructed Cantilever mount for 30mm Scopes, which easily mounts onto 20mm RIS/RAS Rail Systems. It offers two connection points with four securing screws in each mount. The base of the mount attaches to 20mm rails by unscrewing the securing nuts, placing onto the rail and re-tightening.