All External Airsoft Parts & Attachments

If you're running your AAP-01 or AAP-01C as a primary, the Action Army Folding Stock Kit for AAP-01 GBB Pistols provides an extra point of contact for improved accuracy and range and looks fantastic as a bonus! This sleek, minimalist folding stock kit is compatible with the AAP-01 and AAP-01C from Action Army, mounting via the hammer housing pin & rear sight. 

The stock offers length of pull adjustment, an adjustable cheek riser and side folding functionality, making it the equivalent of a SCAR or ACR stock but with a far more compact design well suited to the lightening fast AAP-01. Also moulded as part of the stock base we have a 20mm Picatinny optics rail, allowing you to mount a red dot sight or scope to your AAP to enhance its functionality as a primary. 

Steel QD sling sockets are present on either side of the toe of the stock, along with an additional socket beneath the stock mount, ideally placed for single-point slings. If you love the way your AAP-01 shoots but want to extend your effective range and turn it into a mean little carbine, the Action Army Folding Stock Kit for AAP-01 GBB Pistols is what you need to get the job done!

If you are looking for a short tracer unit which maintains the illusion of being a suppressor, this NUPROL Tracer Unit does just that! Styled externally after a modern rifle suppressor, the NUPROL Tracer is a great addition to any CQB build thanks to its short overall length, and obviously, the intimidation factor glowing BBs provides. This tracer has an internal rechargeable battery that can be charged using the included Micro-USB cable, and can be mounted to any 14mm CCW male threaded barrel. 

If you are looking for a short tracer unit which maintains the illusion of being a suppressor, this NUPROL Tracer Unit does just that! Styled externally after a modern rifle suppressor, the NUPROL Tracer is a great addition to any CQB build thanks to its short overall length, and obviously, the intimidation factor glowing BBs provides. This tracer has an internal rechargeable battery that can be charged using the included Micro-USB cable, and can be mounted to any 14mm CCW male threaded barrel. 

If you're looking for a way to transform your pistol and up its FPS in a stealthy fashion look no further than the WE Silencer Extended Barrel Kit. The inner barrel extension is a replacement for your current inner barrel and will need some technical disassembly, or alternatively, if you don't need any more FPS you can always just use the alloy suppressor itself.

The suppressor is attached via the 11mm CCW thread and fits over the inner barrel for a seamless upgrade.

Features

• 180mm Inner barrel extension
• 110mm suppressor
• 11mm CCW thread
• Alloy construction
• Increases FPS
• Increases accuracy

Package Includes

• Silencer Extended Barrel Kit
• Spring

If you want to give your M-LOK or KeyMod rail a new look or keep your attachment slots protected, rail covers are what you need! The MGP PPG Rail Cover Panel for M-LOK and KeyMod are supplied as a set of 3 covers; one 40mm, one 80mm and one 120mm cover and are designed to attach to both KeyMod and M-LOK slots. Each cover has hex pattern texture on the surface, inspired by Kryptec Typhon camouflage. The texture both looks fantastic and provides excellent gripping qualities, improving the wet weather handling of your primary and making it look more unique.

The covers are constructed from Nylon reinforced polymer and as such are rock solid, with not a hint of flex to be found. The supplied T-nuts are constructed from steel to provide ample strength to keep the covers tightly fitted, even when heavily used. If you want to style up your primary and give it the custom looks, these covers will do just that and make your primary more ergonomic as a bonus!

If you want to give your M-LOK or KeyMod rail a new look or keep your attachment slots protected, rail covers are what you need! The MGP PPG Rail Cover Panel for M-LOK and KeyMod are supplied as a set of 3 covers; one 40mm, one 80mm and one 120mm cover and are designed to attach to both KeyMod and M-LOK slots. Each cover has hex pattern texture on the surface, inspired by Kryptec Typhon camouflage. The texture both looks fantastic and provides excellent gripping qualities, improving the wet weather handling of your primary and making it look more unique.

The covers are constructed from Nylon reinforced polymer and as such are rock solid, with not a hint of flex to be found. The supplied T-nuts are constructed from steel to provide ample strength to keep the covers tightly fitted, even when heavily used. If you want to style up your primary and give it the custom looks, these covers will do just that and make your primary more ergonomic as a bonus!

The QD Sling Swivel Adapter from 8Fields Tactical is intended to work with QD sling sockets to provide a quick swappable sling solution. The set includes a steel QD sling swivel and an extension strap with an elastic cover and a polymer buckle. To connect the adapter to your QD sling socket all you need to do is push the swivel into the socket, where it will lock in place. To remove it simply press the button at the centre of the swivel which will release it from the socket. With this sling adapter you have the choice, you can either mount your sling directly to the steel swivel or make use of the extension strap for a bit more flexibility.

If you run a GBBR M4/AR-15 and you want an easy way to improve your weapons handling, the Aluminium BAD lever for M4/AR-15 from Big Dragon is what you need! This device attaches to the bolt release catch on the left side of the receiver and allows you to drop the bolt after a reload without having to hit the ping pong paddle, instead you press this lever with your trigger finger. The BAD (Battery Assist Device) also allows you to lock the bolt to the rear without taking your hand off the pistol grip with a push upwards on the lever when the charging handle is pulled back.

AEG users need not feel left out; the BAD can still be mounted to your AEG, but more as an aesthetic touch to mimic real world customised ARs. Compatibility wise, this device may need modification or shimming for a tight fit on any specific platform, so we only recommend this part for experienced users.

An Alloy constructed Kill Flash for 26, 32, 40 and 50mm riflescopes, which will keep the glare off your objective lens and give a clearer image; leaving you undistracted to take that all important shot.

If you need a handling upgrade for your KeyMod-equipped primary, a stubby VFG will help you steer between targets far faster! The FMA Stubby Vertical Foregrip; KeyMod is constructed from high-density polymer with steel mounting hardware and can be fitted to any KeyMod rail system at a position of your choice. This grip is highly adaptable and can be used in multiple ways, including in a traditional vertical grip hold and with a thumb-over-bore hold. 

The grip has a ribbed exterior to enhance traction and its stubby design means it is far less likely to snag on your sling or other protruding gear. Also present is a storage compartment inside the grip, designed for CR123a batteries but equally capable of housing a small stash of tactical sweets to help you maintain energy and morale while skirmishing. The compartment can be accessed by unscrewing the base of the grip, and even includes a rubber O-ring to prevent moisture ingress. If you usually use a standard VFG and want to upgrade to something more modern, this grip is ideal!

If you want to add some ambidextrous functionality to your M4/AR15 AEG or KWA ERG platform along with a hint of flare, this charging handle from PTS Syndicate would be perfect! The Radian Raptor-LT is based on the real steel Radian Raptor ambidextrous charging handle and includes licenced Radian trademarks laser engraved onto the handle itself.

To add a custom aesthetic, PTS has produced this charging handle with red or black levers on either side, giving your receiver a nice pop and letting observers know your gun has the custom touch!

If you are rocking a primary with a 1913/20mm Picatinny stock interface, this should be of interest! The SigAir 1913/20mm Picatinny Telescoping Folding Stock is compatible with the SigAir MPX, MCX and any other Airsoft gun with a 1913/20mm Picatinny stock mounting interface. 

Amongst its many tricks, the 1913/20mm Picatinny Telescoping Folding Stock can fold to the side, be adjusted into any of 6 lengths of pull settings and includes a steel QD sling socket on either side. With official licencing from SigAir and full Sig Sauer trademarks, this stock is the perfect addition to a cutting-edge realism-focussed build!

A 14mm CCW-compatible tracer unit that will illuminate your BBs as they leave the barrel, making it much easier to identify hits, and teammate locations, run infection-themed skirmishes, and generally light up the dark with bio-luminescence.

A compact Riser Mount for 20mm Rail Systems, which allows you to mount a Red Dot Sight higher than it normally would, which is useful for Lower Face Protection users who struggle to aim down their sights. By mounting you Red Dot higher, you can look down the sight even whilst wearing something to protect your mouth, such as a Lower Face Mesh Mask.

This alloy-constructed rail adaptor is designed for KeyMod rail systems and provides a short section of 20mm Picatinny Rail. You can diversify your Keymod rail and equip it with six slots of 20mm Picatinny rail, perfect for foregrips or lasers! They are very easy to install to KeyMod Rail Slots using the included Screws, Nuts and Allen Key.

Treat your Keymod handguard to a whole new world of customisation with the Delta Armory Key-Mod 93mm Picatinny Rail Section!

A 20mm RIS lower mounted point designed to stop the operator of the weapons' hand from sliding forward in front of the barrel. 

The Maple Leaf Whisper Dummy Suppressor; 14mm CCW/16mm CW is the perfect suppressor for your pistols. It offers 14mm CCW/CW and 16mm CW threading, which makes it compatible with most Airsoft pistols, including the sneaky MK23. It is constructed from lightweight aluminium and only adds an extra 85 grams to your platform.

The different threading directions and sizes are different adapters and can be changed to suit your platform's specific threading. The 14mm makes this platform compatible with most Airsoft platforms. The addition of a 16mm CW thread adapter also makes this suppressor compatible with MK23-style airsoft pistols.

The thread adapters are screwed on tight and require a lot of force to remove, be very careful not to damage the suppressor when changing the thread adapters.

If you want a way to lengthen your primary without adding excess weight, the Laylax 9 Inch Carbon Fibre Barrel Extension is what you need. This barrel extension is constructed from carbon fibre instead of the usual alloy or steel, giving it a miraculously low weight of only 41 grams and the eye-catching looks of carbon fibre texture.

Barrel extensions are a great way to change your build without needing to change the outer barrel itself, offering a simple installation provided your original barrel has 14mm CCW male threads at the tip. If you're building a DMR from an SBR and already have a longer inner barrel, the Laylax 9 Inch Carbon Fibre Barrel Extension will keep it covered with speedy-looking carbon fibre and give you threads for a tracer, suppressor or flash hider at the tip!

If you want to turn your Hi-capa into a sci-fi looking speed demon, the Custom "Gungnir" slide from Laylax Nine Ball is about the best solution! This slide is constructed from high density polymer, meaning it tips the scales at an astonishingly low 43g! This also includes an integrated optics mounting plate, and two sets up back up iron sights, ready in case your optic goes down. This is the lightest slide we sell by a wide margin, and the lighter your slide the faster your pistol will cycle! 

If you want to turn your Hi-capa into a sci-fi looking speed demon, the Custom "Gungnir" slide from Laylax Nine Ball is about the best solution! This slide is constructed from high density polymer, meaning it tips the scales at an astonishingly low 43g! This also includes an integrated optics mounting plate, and two sets up back up iron sights, ready in case your optic goes down. This is the lightest slide we sell by a wide margin, and the lighter your slide the faster your pistol will cycle! 

If you want to turn your Hi-capa into a sci-fi looking speed demon, the Custom "Gungnir" slide from Laylax Nine Ball is about the best solution! This slide is constructed from high density polymer, meaning it tips the scales at an astonishingly low 43g! This also includes an integrated optics mounting plate, and two sets up back up iron sights, ready in case your optic goes down. This is the lightest slide we sell by a wide margin, and the lighter your slide the faster your pistol will cycle! 

Fed up with fiddling when you want to switch to fun mode? TTi have you covered with the Extended Charging Handle w/Selector Switch. This set includes an extended charging handle which mounts over the top of the AAP-01 bolt and can be installed on either side, providing a protruding trigger style handle which can be racked with a single hand. Built into the rear of the charging handle we also have a low profile rotary selector lever, which means when you want to switch fire modes its no longer necessary to lock the bolt back and waste precious seconds routing around for the switch! This would be the perfect pairing for an AAP-01 in a carbine kit!

If your primary weapon is boasting a 1913/20mm Picatinny stock setup you now have some fresh new stock options thanks to 5KU! The 1913/20mm Picatinny Folding Visor/Respirator Stock is designed to mount to any 20mm Picatinny rail, primarily those found on MPX and MCX rifles, and other AEG/GBB primaries with 1913/20mm Picatinny stock mounting apparatus. Feel free to mount it to any rail on your AEG, but don't blame us for the funny looks!

The stock body is constructed from aluminium to keep the weight low, and the butt plate is rubber with linear texture to promote positive grip, with or without body armour. The folding/mounting mechanism is constructed from steel to provide the strength needed, and the QD sockets on either side of the stock are also steel, and fully functional. The Visor/Respirator stock is designed specifically to provide perfect sight alignment when wearing bulky face gear, allowing you to see down your optic without requiring a riser and increasing height over bore.

If you want to take pure advantage of the SSP5's incredible range and accuracy, an optics mount will get you there! The Novritsch 20mm Picatinny Top Rail for SSP5 GBB Pistol is compatible with all variants of the SSP5 GBB and is constructed from CNC machined aluminium for a perfect combination of low weight, high strength and flawlessly in-spec rail dimensions.

The Top Rail is available in two different lengths, a short version measuring approximately 6cm long and a longer version measuring approximately 10.1 cm. The rail is installed on the optics mount section of the fixed SSP5 outer barrel, meaning it says put while you tap tap tap that trigger for easier target acquisition and less chance your optic will take damage from recoil. If you are running your SSP5 as a primary, this mount is essential to make the most of its epic performance!

If you're seeking a pistol-optimised tracer unit, you can't do much better than the Acetech Brighter C! This compact tracer unit is one of the most popular on the market for GBB pistols and it's easy to see why! Its minimalist design and ultra-low weight mean it won't slow the cyclic rate of your GBB pistol and it fits nicely into most retention holsters without needing to be removed and remounted each time you draw your sidearm. 

The Brighter C is also widely credited with being one of the brightest tracer units on the market, designed specifically for green tracer BBs and making them glow like the sun! Amongst its other tricks, the Brighter C boasts a "shake to wake" system, meaning you can turn the unit on by shaking it and it will turn itself off when motionless for more than 5 minutes. The unit is powered by an internal lithium-ion battery and is recharged via a Micro USB cable, making it economical to run with no extra hidden costs. Whether you need a tracer unit for your primary pistol setup or you want glowing BBs without making your rifle heavier or longer than it needs to be, the Acetech Brighter C Tracer unit is what you need!

If you're seeking an ultra-modern suppressor to top off your build, the Airsoft Artisan SCI-6 Style Suppressor w/ 3-Prong Flash Hider is a fine choice. This suppressor is modelled after the real steel SCI-6 and includes all the flawless details and crisp machining we would expect from an Airsoft Artisan suppressor made from CNC aluminium and steel. 

The suppressor body is made from CNC aluminium and the QD collar is made from steel, giving you strength where needed for a lifetime of reliable mounting and removing. The included 3-prong flash hider is also made from steel and is a beautiful piece all by itself; a squat and menacing design well suited to modern rifle builds. If a suppressor with high-end styling is all you need to finish off your dream build, the Airsoft Artisan SCI-6 Style Suppressor w/ 3-Prong Flash Hider is the way to go!

An official spare sling hook, allowing for the replacement of the lost or broken part of your Airsoft Scorpion Evo. 

A 12 pack of Rail Covers, designed to provide a non-slip and more comfortable surface to 20mm RIS / RAS Rail.

This Kill Flash for Novritsch 1-4x Variable ''LPVO'' Scope, will keep the glare off your objective lens and give a clearer image; leaving you undistracted to take that all important shot.

When installed, the honey-comb design limits the amount of light being allowed to enter the lens, which on a sunny day will lead to a less fuzzy and distracting image, where you will find it much easier to pick out details/targets. It also functions as a lens protector and can save your precious lens from a couple of BB hits before letting a round through. The other benefit of this kill flash is that it prevents the sun from bouncing off your lens and lighting your lens up like bonfire night - which would massively give your position way.

Flash light cables dangling and snagging your sling? WADSN has got you and your cables covered! This is a rail cover for M-LOK rail system with a textured exterior for that bit of extra friction and grip. But the real use of this rail cover is that it has a number of recesses for which to run cables through, keeping them confined and tidy.

So if you find yourself with loose cables from tactical devices such as battery wiring, pressure switches and other cables, this is what you need to keep them out of the way and minimize snagging.