All External Airsoft Parts & Attachments

An Airsoft suppressor designed to be fit onto Airsoft guns which have a 14mm Counter Clockwise, CCW, threaded outer barrel, and has a textured body for easy attachment and removal. The suppressor is filled with foam designed to reduce the amount of noise your gun makes by absorbing a small amount of the sound when your Airsoft Gun is fired.

This suppressor is perfect for any Airsoft Skirmisher who is looking to give their Airsoft rifle a new look, or for those who want to modify the sound of their Airsoft replica.

A two inch barrel extension for 14mm CCW threaded barrels, providing that little extra length should you wish to add a suppressor or tracer to your favourite RIF but can't because of a rail system being in the way.

If you want to give your primary a sneaky look, a suppressor will do the trick! The Specna Arms Covert Tactical Silencer is constructed from aluminium and has 14mm CCW threads at one end, with 14mm CW threads at the opposite end. This simple suppressor is very light, making it suitable for GBB pistols without compromising gas efficiency too much.

This version of Specna's silencer is the "Bacon" version, marked with "Put Bacon Here" on the outside. Naturally, we don't recommend doing this for food hygiene reasons but Americans have been known to cook bacon using real steel suppressors, taking advantage of the heat build-up to kill two birds with one stone. How very American!

A replacement dust cover for the top of CYMA CM.040 AK47 Variant Rifles, designed to add a top 20mm RIS / RAS Rail for the attachment of Sights and Scopes without the use of a Side Scope Mount. 

An Airsoft mock suppressor, designed to replace an Airsoft gun's flash hider, and featuring an imitation of the US SOCOM special operations forces weapon suppressor. 

If you're putting together an M4/AR-15 AEG from scratch or you want to add a sliding stock to your fixed stock rifle, this buffer tube should help! The Buffer Tube for M4/AR-15 AEG from Delta Armory is constructed from alloy and compatible with most M4/AR-15 AEGs on the market. The tube provides 6 positions of adjustment for whichever M4/AR-15 AEG sliding stock you choose to mount, allowing you to collapse the stock for storage or close-range engagements. 

The set includes the buffer tube itself, the castle nut (non-functional) and the bolt required to mount the buffer tube. This is a standard TM clone buffer tube design and should fit most M4/AR-15 AEGs without issue, though as with any external mod, there may be slight fitting which needs to be carried out. 

A Dummy Silencer/Suppressor for Airsoft Guns which have a 14mm CCW Thread. It is constructed from Aluminium, has an overall width of 32mm, length of 196mm and easily attaches to threads by screwing onto the end of your barrel. The core of the Suppressor is filled with Dummy Foam and a Spring Core to keep the center clear, and ensure BBs aren't fouling on the interior foam.

A Suppressor for Airsoft Guns with a 14mm Clockwise or Counter Clockwise Thread, which is made from Aluminium to be both tough and lightweight. 

The Suppressor is foam filled, which will slightly dampen your Muzzle Report, and it also has a Spring Core which keeps the foam in position and stops your BBs fouling on the foam as they try to leave the barrel. 

If you have a custom Airsoft Gun or want to hide an Inner Barrel Extension, then this Dummy Sound Suppressor is the perfect finishing touch.

A Vertical Foregrip designed to be attached onto the Front Handguard of Rifles and Submachine Guns to give the user a more stable grip on the weapon. 

If you are looking for a tracer unit with a unique look and rainbow flash functionality, the NUPROL BOCCA Series Rainbow Tracer unit should be on your list! This unit is available in 3 different styles to suit any preference, from the hyper-aggressive "Shark" version to the moderately menacing "Octagon" and the more discrete and milsim-friendly "Stubby" model and all models offer the option to choose the colour of the dazzling muzzle flash effect.

The BOCCA Series Rainbow Tracer unit mounts to any Airsoft gun with 14mm CCW male threads at the tip of the barrel, making it suitable for practically any AEG rifle straight out of the box. Naturally, being a tracer unit, this device also houses UV LEDs which make green tracer BBs glow on their way to the target, giving you a significant advantage when it comes to instinct aiming, low-light operations and psychological warfare.

Power is provided by an internal Lithium battery which can easily be recharged using the included Micro USB charger cable, and the housing is constructed from aluminium to provide the strength needed for the rigours of Airsoft skirmishing. If you are looking for a tracer unit with rainbow flash effect and an interesting external design, the BOCCA series tracer units have something for any taste!

If you are looking for a tracer unit with a unique look and rainbow flash functionality, the NUPROL BOCCA Series Rainbow Tracer unit should be on your list! This unit is available in 3 different styles to suit any preference, from the hyper-aggressive "Shark" version to the moderately menacing "Octagon" and the more discrete and milsim-friendly "Stubby" model and all models offer the option to choose the colour of the dazzling muzzle flash effect.

The BOCCA Series Rainbow Tracer unit mounts to any Airsoft gun with 14mm CCW male threads at the tip of the barrel, making it suitable for practically any AEG rifle straight out of the box. Naturally, being a tracer unit, this device also houses UV LEDs which make green tracer BBs glow on their way to the target, giving you a significant advantage when it comes to instinct aiming, low-light operations and psychological warfare.

Power is provided by an internal Lithium battery which can easily be recharged using the included Micro USB charger cable, and the housing is constructed from aluminium to provide the strength needed for the rigours of Airsoft skirmishing. If you are looking for a tracer unit with rainbow flash effect and an interesting external design, the BOCCA series tracer units have something for any taste!

A Vertial Foregrip designed to give the user an extra control point on their weapon. The foregrip is constructed from Polymer and is designed to fit 20mm RIS / RAS Rails. 

If you are an AK fan but are getting green-eyed over the M4/AR-15's accessory options, a railed handguard will cure that! The CYMA 20mm Picatinny Railed Handguard for AK AEG is constructed from solid high density polymer and provides 20mm Picatinny rails at the 3, 6, 9 and 12 o'clock positions, ready for 20mm Picatinny accessories.

The side rails are short lengths, ideally designed to mount a tactical flashlight or aiming laser but can also be removed if you prefer slick sides on your handguard. The top rail features 12cm of rail space, allowing for a forward mounted red dot sight to be fitted for that slick PMC look. The bottom rail is 11cm long, providing enough room at the front so you can add a vertical or angled foregrip, or even a bipod if you see fit. The sides of the lower handguard also include ribs for extra grip, similarly to the standard issue AK-10x polymer handguards. If you want to mount your mission essential kit to your AK AEG or GBBR this handguard is one of the cheapest ways to do it!

Can be fitted to Airsoft Weapons to lift up Sights and Scopes making them easier to use with Full Face Protection and other Masks. 

If you want to use your 20mm Picatinny accessories with a KeyMod handguard, the PTS Enhanced Rail Section for KeyMod is what you need! This 20mm rail section is constructed from Dupont Zytel Polymer and is available in several length and colour options, suitable for any build aesthetic. Like the M-LOK version, this rail has a sleek look, owing to the weight-reducing corner cuts, keeping your rail looking slick and avoiding sharp corners, a major ergonomic pitfall.

If you're dressing up your KeyMod rail but prefer to use your 20mm accessories rather than buying new KeyMod bits, the PTS Enhanced Rail Section for KeyMod is ideal!

If you want to use your 20mm Picatinny accessories with a KeyMod handguard, the PTS Enhanced Rail Section for KeyMod is what you need! This 20mm rail section is constructed from Dupont Zytel Polymer and is available in several length and colour options, suitable for any build aesthetic. Like the M-LOK version, this rail has a sleek look, owing to the weight-reducing corner cuts, keeping your rail looking slick and avoiding sharp corners, a major ergonomic pitfall.

If you're dressing up your KeyMod rail but prefer to use your 20mm accessories rather than buying new KeyMod bits, the PTS Enhanced Rail Section for KeyMod is ideal!

If you want to use your 20mm Picatinny accessories with a KeyMod handguard, the PTS Enhanced Rail Section for KeyMod is what you need! This 20mm rail section is constructed from Dupont Zytel Polymer and is available in several length and colour options, suitable for any build aesthetic. Like the M-LOK version, this rail has a sleek look, owing to the weight-reducing corner cuts, keeping your rail looking slick and avoiding sharp corners, a major ergonomic pitfall.

If you're dressing up your KeyMod rail but prefer to use your 20mm accessories rather than buying new KeyMod bits, the PTS Enhanced Rail Section for KeyMod is ideal!

If you are undecided when it comes to vertical grips and sometimes like the old-school ways, this Folding Vertical Grip from CYMA is ideal for you! Constructed from high density polymer with a steel folding mechanism, the Folding Vertical Grip can be mounted to any 20mm Picatinny rail via its spring-loaded QD mount. 

To mount the grip, simply push the textured end of the locking bar on the mount in and slide it onto the front of your rail. When you release the locking bar, the grip will stay right where it is. To fold and unfold, simply press the central screw-like button and position the grip in either the horizontal or vertical position. 

At the front of the grip, we are treated to a hand stop-like curved protrusion intended to prevent you from slipping off the grip and potentially shooting your hand; a useful feature if you mount this right at the front of a short-barreled platform. If you're looking for an affordable 20mm Picatinny grip solution with plenty of functionality, the CYMA Folding Vertical Grip is one to watch!

This High Profile Rail Riser is designed for any 20mm RIS/RAS Accessory, and is designed to lift it up off the Rail. This is particularly useful for those trying to use a Lower Face Mask with a Red Dot Sight, as you might find that you Mask stops you from aiming down your standard Rail System.

A one inch barrel extension for 14mm CCW threaded barrels, providing that little extra length should you wish to add a suppressor or tracer to your favourite RIF but can't because of a rail system being in the way.

A 117mm barrel extension for any AEG with a 14mm CCW thread on the end of it. Perfect if you want to use a suppressor but can't because of a barrel that is recessed far inside the rail.

A 117mm barrel extension for any AEG with a 14mm CCW thread on the end of it. Perfect if you want to use a suppressor but can't because of a barrel that is recessed far inside the rail.

This flash hider is a great match to an aggressive CQB skirmisher. Providing a booming muzzle report, this little but mighty muzzle device will surely strike fear into your opponent's hearts. Attaching to any 14mm thread, its design is perfect for a CQB arena, blasting out some booming sounds, and jumping around the corner to scare the living daylights out of your foes. It's constructed from a solid alloy, sure to withstand whatever a skirmish can throw at you.

Using the Cybergun 14mm Sound Amplifier, you can listen as your shots are echoed around the environment and your enemies have second thoughts about whether they really want to face off against you...

The moment all AK users have been waiting for; a high quality PBS-4 Suppressor replica made from Alloy with both a 14mm CCW and 22mm CW thread.

A quick-detach sling loop point and sling loop for KeyMod rail systems, allowing you to attach a sling to any point on a KeyMod system.

A Polymer constructed Sliding/Collapsible Stock for AR Platform M4/M16 replicas, which can be set to multiple lengths on the Buffer Tube, and comes included with both a thick and thin Rubber Butt Pad.

A Polymer constructed Sliding/Collapsible Stock for AR Platform M4/M16 replicas, which can be set to multiple lengths on the Buffer Tube, and comes included with both a thick and thin Rubber Butt Pad.

An alloy constructed thread adapter for Army Armament branded Airsoft pistols with a 12mm CCW female threaded outer barrel. If own an Army Armament pistol with a female thread on the outer barrel and want to install a suppressor, tracer unit or other muzzle device, then this is the adapter you require. It comes supplied with a knurled thread protector to prevent damage to the threads (and look awesome) when a muzzle device is not installed.

A Mock Suppressor designed to fit on Airsoft 6mm BB Gun Assault Rifles, and is branded to look like it is a US Airforce Supplied Suppressor.

A Polymer Solid Stock for SMG-5 replicas, which easily bolts on to SMG-5 Airsoft Guns to provide a stable aiming platform and a large battery compartment if your AEG is rear wired.