All External Airsoft Parts & Attachments

A Vertial Foregrip designed to give the user an extra control point on their weapon. The foregrip is constructed from Polymer and is designed to fit 20mm RIS / RAS Rails. 

If you want to use your 20mm Picatinny accessories with a KeyMod handguard, the PTS Enhanced Rail Section for KeyMod is what you need! This 20mm rail section is constructed from Dupont Zytel Polymer and is available in several length and colour options, suitable for any build aesthetic. Like the M-LOK version, this rail has a sleek look, owing to the weight-reducing corner cuts, keeping your rail looking slick and avoiding sharp corners, a major ergonomic pitfall.

If you're dressing up your KeyMod rail but prefer to use your 20mm accessories rather than buying new KeyMod bits, the PTS Enhanced Rail Section for KeyMod is ideal!

If you want to use your 20mm Picatinny accessories with a KeyMod handguard, the PTS Enhanced Rail Section for KeyMod is what you need! This 20mm rail section is constructed from Dupont Zytel Polymer and is available in several length and colour options, suitable for any build aesthetic. Like the M-LOK version, this rail has a sleek look, owing to the weight-reducing corner cuts, keeping your rail looking slick and avoiding sharp corners, a major ergonomic pitfall.

If you're dressing up your KeyMod rail but prefer to use your 20mm accessories rather than buying new KeyMod bits, the PTS Enhanced Rail Section for KeyMod is ideal!

If you want to use your 20mm Picatinny accessories with a KeyMod handguard, the PTS Enhanced Rail Section for KeyMod is what you need! This 20mm rail section is constructed from Dupont Zytel Polymer and is available in several length and colour options, suitable for any build aesthetic. Like the M-LOK version, this rail has a sleek look, owing to the weight-reducing corner cuts, keeping your rail looking slick and avoiding sharp corners, a major ergonomic pitfall.

If you're dressing up your KeyMod rail but prefer to use your 20mm accessories rather than buying new KeyMod bits, the PTS Enhanced Rail Section for KeyMod is ideal!

If you want to use your 20mm Picatinny accessories with a KeyMod handguard, the PTS Enhanced Rail Section for KeyMod is what you need! This 20mm rail section is constructed from Dupont Zytel Polymer and is available in several length and colour options, suitable for any build aesthetic. Like the M-LOK version, this rail has a sleek look, owing to the weight-reducing corner cuts, keeping your rail looking slick and avoiding sharp corners, a major ergonomic pitfall.

If you're dressing up your KeyMod rail but prefer to use your 20mm accessories rather than buying new KeyMod bits, the PTS Enhanced Rail Section for KeyMod is ideal!

If you want to use your 20mm Picatinny accessories with a KeyMod handguard, the PTS Enhanced Rail Section for KeyMod is what you need! This 20mm rail section is constructed from Dupont Zytel Polymer and is available in several length and colour options, suitable for any build aesthetic. Like the M-LOK version, this rail has a sleek look, owing to the weight-reducing corner cuts, keeping your rail looking slick and avoiding sharp corners, a major ergonomic pitfall.

If you're dressing up your KeyMod rail but prefer to use your 20mm accessories rather than buying new KeyMod bits, the PTS Enhanced Rail Section for KeyMod is ideal!

If you want to use your 20mm Picatinny accessories with a KeyMod handguard, the PTS Enhanced Rail Section for KeyMod is what you need! This 20mm rail section is constructed from Dupont Zytel Polymer and is available in several length and colour options, suitable for any build aesthetic. Like the M-LOK version, this rail has a sleek look, owing to the weight-reducing corner cuts, keeping your rail looking slick and avoiding sharp corners, a major ergonomic pitfall.

If you're dressing up your KeyMod rail but prefer to use your 20mm accessories rather than buying new KeyMod bits, the PTS Enhanced Rail Section for KeyMod is ideal!

If you want to turn your local CQB site into a nightclub while you send rainbows of death at the enemy team the T238 RGB Rainbow Burst Tracer Unit for Airsoft Shotguns is what you need! This device can be used as a standard tracer unit, a tracer with a muzzle flash effect with 7 different colours to choose from, and of course, in the rainbow flash mode which lights up the first meter or so of the BB's trajectory with a dazzling rainbow effect. Just wait until you see this thing in action, it is positively EPIC!

This is the latest generation of the T238 RGB Rainbow Burst Tracer Unit for Airsoft Shotguns, meaning it works a little differently than the original model. The activation button is now on the front, and the tracer collar includes relief cuts to allow for shotguns with full-length magazine tubes and iron sights mounted directly to the barrel.

This device is intended for use with tri-shot Airsoft shotguns but comes with a 14mm CCW thread adapter and an adapter for 16mm unthreaded barrels. The default mounting mechanism is compatible with unthreaded shotgun/sniper rifle outer barrels of between 19mm and 24mm outer diameter, giving you an unprecedented amount of flexibility all in a single unit. If you want the enemy team to taste the rainbow, the T238 RGB Rainbow Burst Tracer Unit for Airsoft Shotguns is what you need!

If you are looking for a tracer unit with a unique look and rainbow flash functionality, the NUPROL BOCCA Series Rainbow Tracer unit should be on your list! This unit is available in 3 different styles to suit any preference, from the hyper-aggressive "Shark" version to the moderately menacing "Octagon" and the more discrete and milsim-friendly "Stubby" model and all models offer the option to choose the colour of the dazzling muzzle flash effect.

The BOCCA Series Rainbow Tracer unit mounts to any Airsoft gun with 14mm CCW male threads at the tip of the barrel, making it suitable for practically any AEG rifle straight out of the box. Naturally, being a tracer unit, this device also houses UV LEDs which make green tracer BBs glow on their way to the target, giving you a significant advantage when it comes to instinct aiming, low-light operations and psychological warfare.

Power is provided by an internal Lithium battery which can easily be recharged using the included Micro USB charger cable, and the housing is constructed from aluminium to provide the strength needed for the rigours of Airsoft skirmishing. If you are looking for a tracer unit with rainbow flash effect and an interesting external design, the BOCCA series tracer units have something for any taste!

If you are looking for a tracer unit with a unique look and rainbow flash functionality, the NUPROL BOCCA Series Rainbow Tracer unit should be on your list! This unit is available in 3 different styles to suit any preference, from the hyper-aggressive "Shark" version to the moderately menacing "Octagon" and the more discrete and milsim-friendly "Stubby" model and all models offer the option to choose the colour of the dazzling muzzle flash effect.

The BOCCA Series Rainbow Tracer unit mounts to any Airsoft gun with 14mm CCW male threads at the tip of the barrel, making it suitable for practically any AEG rifle straight out of the box. Naturally, being a tracer unit, this device also houses UV LEDs which make green tracer BBs glow on their way to the target, giving you a significant advantage when it comes to instinct aiming, low-light operations and psychological warfare.

Power is provided by an internal Lithium battery which can easily be recharged using the included Micro USB charger cable, and the housing is constructed from aluminium to provide the strength needed for the rigours of Airsoft skirmishing. If you are looking for a tracer unit with rainbow flash effect and an interesting external design, the BOCCA series tracer units have something for any taste!

If you need more battery space but want to keep your M4/AR-15 AEG slim on the sides, the CYMA Adjustable Whale Stock is just the thing. This sliding stock is designed for M4/AR-15 buffer tubes and offers a fantastic alternative to common Crane stocks used for rear-wired AEG setups. 

The advantage of the Whale Stock over the Crane is its slim profile, avoiding the side bulges of the Crane stock in favour of a larger stock "toe" for battery storage. This means you can use a much larger battery than would fit in a buffer tube but still enjoy the slim, snag-free profile of more slimline AR stocks. 

The Whale Stock also features a QD sling socket on each side, ready for a QD sling swivel, along with a conventional sling loop at the toe of the stock for hook or strap-style slings. If you want a new look for your buffer tube-equipped AR AEG but refuse to surrender your massive battery, the Whale Stock is what you need!

A 117mm barrel extension for any AEG with a 14mm CCW thread on the end of it. Perfect if you want to use a suppressor but can't because of a barrel that is recessed far inside the rail.

If you are thinking of spicing up your M4 with a nice new rail system, freshening up its looks and reducing the weight of the front end for increased manoeuvrability, you've come to the right place! The KeyMod CNC Aluminium Free Float Handguard from Specna Arms is an ultra-slim, lightweight replacement handguard providing 20mm Picatinny rail at the 12 o'clock position, and KeyMod negative space attachment slots at the 3, 6, and 9 o'clock position, providing rails where needed with the option to mount more or add KeyMod accessories should you see fit.

If you want to run your Specna Arms PDW stock-equipped rifle all day, this is what you will need. With a considerable amount more room than the original battery tube, this tube can take up to a 7.4v 1450mAh LiPo battery.

A Polymer Solid Stock for SMG-5 replicas, which easily bolts on to SMG-5 Airsoft Guns to provide a stable aiming platform and a large battery compartment if your AEG is rear wired.

If you've got an M-Rail or M-LOK handguard but your favourite grip only comes in 20mm Picatinny form, ASG's 20mm Picatinny Rail Adapter for M-LOK/M-Rail; Set of 2 is what you need! These 20mm Picatinny rail sections are constructed from alloy with steel screws and are compatible with ASG M-Rail handguards found on the Scorpion EVO 3A1 Carbine and BET, the H-22 and H-15, along with other manufacturers' M-LOK handguards. 

Available as a pack of two sections in 3-slot, 5-slot or 7-slot form, these rails are as adaptable as M-Rail/M-LOK accessories themselves, allowing you to fit them where you need them and reposition them at will. If you want to mount a flashlight or laser to the side of your M-Rail/M-LOK handguard, the ASG 20mm Picatinny Rail Adapter for M-LOK/M-Rail; Set of 2 lets you do just that!

If you've got an M-Rail or M-LOK handguard but your favourite grip only comes in 20mm Picatinny form, ASG's 20mm Picatinny Rail Adapter for M-LOK/M-Rail; Set of 2 is what you need! These 20mm Picatinny rail sections are constructed from alloy with steel screws and are compatible with ASG M-Rail handguards found on the Scorpion EVO 3A1 Carbine and BET, the H-22 and H-15, along with other manufacturers' M-LOK handguards. 

Available as a pack of two sections in 3-slot, 5-slot or 7-slot form, these rails are as adaptable as M-Rail/M-LOK accessories themselves, allowing you to fit them where you need them and reposition them at will. If you want to mount a flashlight or laser to the side of your M-Rail/M-LOK handguard, the ASG 20mm Picatinny Rail Adapter for M-LOK/M-Rail; Set of 2 lets you do just that!

If you've got an M-Rail or M-LOK handguard but your favourite grip only comes in 20mm Picatinny form, ASG's 20mm Picatinny Rail Adapter for M-LOK/M-Rail; Set of 2 is what you need! These 20mm Picatinny rail sections are constructed from alloy with steel screws and are compatible with ASG M-Rail handguards found on the Scorpion EVO 3A1 Carbine and BET, the H-22 and H-15, along with other manufacturers' M-LOK handguards. 

Available as a pack of two sections in 3-slot, 5-slot or 7-slot form, these rails are as adaptable as M-Rail/M-LOK accessories themselves, allowing you to fit them where you need them and reposition them at will. If you want to mount a flashlight or laser to the side of your M-Rail/M-LOK handguard, the ASG 20mm Picatinny Rail Adapter for M-LOK/M-Rail; Set of 2 lets you do just that!

If you're looking for a sleek handguard for your M4/AR-15 build, the Delta Armory CNC Aluminium KeyMod Handguard for M4/AR-15 is one to watch. This handguard is CNC machined from aluminium and offers KeyMod negative space attachment slots at the 3, 6, and 9 o'clock positions with 20mm Picatinny rail running along the top, giving you plenty of accessory options to go with its high-speed styling.

Being a free-floated design means this handguard doesn't come into contact with the outer barrel, meaning no negative effects on accuracy regardless of any force applied. Offered in 12.5" or 15" lengths, the KeyMod handguard is ideal for DMR builds and other long-range setups, pairing well with a 14.5 or 16-inch barrel.

The set also includes an aluminium barrel nut pre-installed inside the handguard so no need to worry about sourcing the right nut. Naturally, this handguard is only for M4/AR-15 platforms and we recommend using an M4/AR-15 barrel nut wrench for the installation process. If you're working on a carbine-length M4 and want a uniquely sleek handguard, the Delta Armory CNC Aluminium KeyMod Handguard for M4/AR-15 is ideal!

If you're looking for a sleek handguard for your M4/AR-15 build, the Delta Armory CNC Aluminium KeyMod Handguard for M4/AR-15 is one to watch. This handguard is CNC machined from aluminium and offers KeyMod negative space attachment slots at the 3, 6, and 9 o'clock positions with 20mm Picatinny rail running along the top, giving you plenty of accessory options to go with its high-speed styling.

Being a free-floated design means this handguard doesn't come into contact with the outer barrel, meaning no negative effects on accuracy regardless of any force applied. Offered in 12.5" or 15" lengths, the KeyMod handguard is ideal for DMR builds and other long-range setups, pairing well with a 14.5 or 16-inch barrel.

The set also includes an aluminium barrel nut pre-installed inside the handguard so no need to worry about sourcing the right nut. Naturally, this handguard is only for M4/AR-15 platforms and we recommend using an M4/AR-15 barrel nut wrench for the installation process. If you're working on a carbine-length M4 and want a uniquely sleek handguard, the Delta Armory CNC Aluminium KeyMod Handguard for M4/AR-15 is ideal!

Want to make your Airsoft rifle more comfortable? An enhanced stock is what you need! The Specna Arms Crane Enhanced Carbine stock is constructed from high-density polymer, with steel QD sling sockets on either side, a steel adjustment pin and a rubber butt plate for added grip in all weather conditions. This stock is easy to install and simply requires you to lift the adjustment lever up and slide the stock onto your buffer tube. This stock will fit any AEG spec M4/AR15 buffer tube, including M4/AR15 stock adapters for Airsoft AK AEGs, SMG-5 and AR36 AEGs.

If you want to give your primary the stealthy aesthetic without compromising its agility, the Novritsch Integrated Suppressor will do the trick! Designed by the Novritsch dev team in Austria with a focus on pure performance, the Novritsch Integrated Suppressor only adds a mere 130g to the weight of your rifle and is nice and slim so it can be installed as an integral suppressor, recessed inside an M4/AR-15 rail system. 

Styling-wise, there are two options up for grabs. The spiral-fluted option (V1) fits the Novrtisch aesthetic perfectly, matching the spiral-fluted barrels on many Novritsch platforms. The straight-fluted version (V2) has more sleek, linear grooves on its surface for a bit of variety but still stands out from more basic tubular suppressors. The Integrated Suppressor is designed to mount to 14mm CCW male threaded outer barrels, meaning it will fit most Airsoft AEGs along with the Novrtisch SSX303, SSR4, SSR63, SSR90, SSQ22 and SSR9 platforms. 

If you want to give your primary the stealthy aesthetic without compromising its agility, the Novritsch Integrated Suppressor will do the trick! Designed by the Novritsch dev team in Austria with a focus on pure performance, the Novritsch Integrated Suppressor only adds a mere 130g to the weight of your rifle and is nice and slim so it can be installed as an integral suppressor, recessed inside an M4/AR-15 rail system. 

Styling-wise, there are two options up for grabs. The spiral-fluted option (V1) fits the Novrtisch aesthetic perfectly, matching the spiral-fluted barrels on many Novritsch platforms. The straight-fluted version (V2) has more sleek, linear grooves on its surface for a bit of variety but still stands out from more basic tubular suppressors. The Integrated Suppressor is designed to mount to 14mm CCW male threaded outer barrels, meaning it will fit most Airsoft AEGs along with the Novrtisch SSX303, SSR4, SSR63, SSR90, SSQ22 and SSR9 platforms. 

A very clever little replacement adjustable stock designed to enhance the ergonomics of M4 and M16 type Airsoft Electric Guns and make your Airsoft gun more controllable. 

If you are looking for a grip that also converts into a bipod but looking for weight and solid construction then this is for you. 

The WADSN T-B HL Series Pistol Flashlight is a mighty fine attachment for your trusted sidearm. It is sure to brighten anyone's day, or at least dazzle them long enough that you can shoot before they have time to figure out what hit them. This pistol flashlight features strobe and solid beam modes with the option of regular on/off or a "momentary" mode.

It also comes with polymer adapter inserts so you can attach this flashlight onto most common pistol under barrels. Temporarily impair your opponents with a whopping 700 lumens and gain the upper hand in your skirmishes with the WADSN T-B HL Series Pistol Flashlight.

An Airsoft modular rail panel designed to be fit onto MLOK hand guards, providing a 5'' 20mm RIS / RAS rail. The kit comes as a kit and is easily built and can quickly be installed to MLOK hand guard to allow the attachment of aftermarket Torches, Lasers, Grips and many other aftermarket attachments.

This rail is perfect purchase for any Airsoft player who has got their hands on a new rifle and are looking to take their gun to the next level by attaching parts and accessories.

A slight angled fore grip designed to stiffen up your grip and aid in improved accuracy down range. A must for anyone wishing to keep a low profile and slick look but gain a tactical advantage on a longer weapon or super CQB package.

Want your rifle to look a little more "special ops" ready? Perhaps you have a long inner barrel you need to hide? The big dragon QD dummy suppressor is just the ticket! Styled after the ubiquitous Knights Armament Co. QD suppressor, this is the perfect accessory for an M4a1 CQB or block 1 CQBR for a mid-2000s US Special forces loadout. 

If you've only got pocket change but want a vertical grip, the Delta Armory Vertical Foregrip for 20mm Picatinny Rails is ideal. This ultra-affordable vertical foregrip is styled after the real steel KAC VFG, the iconic design used on US Army M4A1 rifles and G36K platforms used by German KSK. This VFG mounts to any 20mm Picatinny rail and is very easy to mount, requiring not a single tool! 

To mount the grip, unscrew the base, slide it onto your rail, align the hole in the side of the grip with a notch on your rail and tighten the base back down, securing the grip in place. If you're looking for a cost-effective ergonomic enhancement for your 20mm Picatinny rail-equipped platform, the Delta Armory Vertical Foregrip for 20mm Picatinny Rails is the one to go for!