All External Airsoft Parts & Attachments

If you're worried about losing your RMR red dot to a BB impact, cast your concern aside and add this to your setup! The JJ Airsoft Kill Flash Lens Protector for RMR Red Dot Sights is designed to mount to the front of an RMR or RMR clone micro red dot sight and protect the lens from BB impacts along with reducing glare so your shiny objective lens doesn't give you away. 

If you want to protect your lens while keeping your setup looking realistic, this is the way to go! 

If you are having a hard time seeing down your low-profile red dot sight, a rail riser will make all the difference! The Vector Optics 0.83" 20mm Picatinny Rail Riser Mount is designed to assist those who struggle to see down their red dot sight, either because of a very low profile mount, a full face mask or neck pain.

The riser offers a 4cm length of 20mm Picatinny rail raised 0.83"/2.2cm above the height of the original rail to which it is mounted. Being constructed from aluminium with a steel mounting bolt, this riser keeps added weight to an absolute minimum. Mounting the riser is as simple as mounting your red dot; simply align it with your rail and tighten down the thumb screw on the side. The centre of the riser is also milled out to provide a channel through which the iron sights on certain platforms can still be used which also helps with weight reduction.

If you are having a hard time getting your face low enough to see through your optic, this riser should solve that issue and get you shooting straight!

If you want the front end your AK Airsoft gun to have the vibe of a medieval war mace, this muzzle brake should do the trick! The CYMA DTK-3 Russian AK Muzzle Brake is constructed from steel and replicates the real Zenitco DTK-3, one of the latest enhancements for the AK platform, straight out of Russia. The brake follows the typical Zenitco aesthetic of pure aggression and combines a large 3-port muzzle brake with a glass breaker front to form one of the most menacing muzzle devices we have seen yet.

The brake is threaded for 24mm CW Russian AK threads and also includes a 14mm CCW male thread adapter, making it compatible with almost any Airsoft AEG or GBBR. If you want your primary to make the enemy team shake in their boots, this is your best shot!

Is your SMG-5/MP-5 looking left out amongst its railed-up brethren? Here is the solution! It's all included in the box, a 20mm rail system, 2 rail covers, and a vertical grip to stop those sexy rails from slicing your hands to pieces. Cyma even throw in a metal outer barrel! It is not essential to install the outer barrel to make the rail system compatible but it is nice that it is included!

If you've misplaced your Crane stock's butt plate, here you go! The Delta Armory Butt Plate for Crane M4/AR-15 Battery Stock is a replacement original part and should fit the vast majority of Airsoft Crane stocks, particularly those from Delta Armory, Specna Arms and Lancer Tactical. The butt plate is constructed in two parts; with the base being high density polymer and the outer coating being grippy rubber with lattice texture on its surface.

As mentioned, this should fit almost any Airsoft Crane stock out there but we haven't tested them all, so proceed with caution and remember we cannot accept returns on any butt plate that has been modified.

If you have QD sling sockets on your Airsoft rifle it would be rude not to take pure advantage and set your rifle up with a highly flexible sling setup which can be installed, altered and removed in mere seconds! This QD sling swivel from CYMA fits any QD sling socket and provides a wide "loop" style mount, to which a sling of practically any style can be mounted. To install the swivel onto a QD socket, simply push it into the socket and it will automatically lock in place. To disconnect the swivel all you need to do is press the button in the centre which will release the retention and disconnect the swivel from the socket on the rifle. This QD swivel can be rotated to any angle, guaranteeing the utmost comfort no matter which sling style you choose!

The QD Sling Swivel Adapter from 8Fields Tactical is intended to work with QD sling sockets to provide a quick swappable sling solution. The set includes a steel QD sling swivel and an extension strap with an elastic cover and a polymer buckle. To connect the adapter to your QD sling socket all you need to do is push the swivel into the socket, where it will lock in place. To remove it simply press the button at the centre of the swivel which will release it from the socket. With this sling adapter you have the choice, you can either mount your sling directly to the steel swivel or make use of the extension strap for a bit more flexibility.

The QD Sling Swivel Adapter from 8Fields Tactical is intended to work with QD sling sockets to provide a quick swappable sling solution. The set includes a steel QD sling swivel and an extension strap with an elastic cover and a polymer buckle. To connect the adapter to your QD sling socket all you need to do is push the swivel into the socket, where it will lock in place. To remove it simply press the button at the centre of the swivel which will release it from the socket. With this sling adapter you have the choice, you can either mount your sling directly to the steel swivel or make use of the extension strap for a bit more flexibility.

The QD Sling Swivel Adapter from 8Fields Tactical is intended to work with QD sling sockets to provide a quick swappable sling solution. The set includes a steel QD sling swivel and an extension strap with an elastic cover and a polymer buckle. To connect the adapter to your QD sling socket all you need to do is push the swivel into the socket, where it will lock in place. To remove it simply press the button at the centre of the swivel which will release it from the socket. With this sling adapter you have the choice, you can either mount your sling directly to the steel swivel or make use of the extension strap for a bit more flexibility.

If you're looking for a sleek handguard for your M4/AR-15 build, the Delta Armory CNC Aluminium KeyMod Handguard for M4/AR-15 is one to watch. This handguard is CNC machined from aluminium and offers KeyMod negative space attachment slots at the 3, 6, and 9 o'clock positions with 20mm Picatinny rail running along the top, giving you plenty of accessory options to go with its high-speed styling.

Being a free-floated design means this handguard doesn't come into contact with the outer barrel, meaning no negative effects on accuracy regardless of any force applied. Offered in 12.5" or 15" lengths, the KeyMod handguard is ideal for DMR builds and other long-range setups, pairing well with a 14.5 or 16-inch barrel.

The set also includes an aluminium barrel nut pre-installed inside the handguard so no need to worry about sourcing the right nut. Naturally, this handguard is only for M4/AR-15 platforms and we recommend using an M4/AR-15 barrel nut wrench for the installation process. If you're working on a carbine-length M4 and want a uniquely sleek handguard, the Delta Armory CNC Aluminium KeyMod Handguard for M4/AR-15 is ideal!

If you're looking for a sleek handguard for your M4/AR-15 build, the Delta Armory CNC Aluminium KeyMod Handguard for M4/AR-15 is one to watch. This handguard is CNC machined from aluminium and offers KeyMod negative space attachment slots at the 3, 6, and 9 o'clock positions with 20mm Picatinny rail running along the top, giving you plenty of accessory options to go with its high-speed styling.

Being a free-floated design means this handguard doesn't come into contact with the outer barrel, meaning no negative effects on accuracy regardless of any force applied. Offered in 12.5" or 15" lengths, the KeyMod handguard is ideal for DMR builds and other long-range setups, pairing well with a 14.5 or 16-inch barrel.

The set also includes an aluminium barrel nut pre-installed inside the handguard so no need to worry about sourcing the right nut. Naturally, this handguard is only for M4/AR-15 platforms and we recommend using an M4/AR-15 barrel nut wrench for the installation process. If you're working on a carbine-length M4 and want a uniquely sleek handguard, the Delta Armory CNC Aluminium KeyMod Handguard for M4/AR-15 is ideal!

This is for those of you that want to upgrade your AK and make it more up-to date with room for customisation. Constructed from sturdy alloy, the rail system features 4 (quad) rails at the 3, 6, 9 and 12 o clock positions. The top rail offers 3.5 inches of rail real estate with the other 3 rails offering 5 inches to mount tactical equipment.

So if you find yourself wanting more room to customise your AK with more rail space, like the M4s of this world, this is what you're looking for. Designed for CYMA AKS-74U AEGs, but may potentially fit other models of AKS-74U as well. The handguard comes with a mounting device so it can be attached to the barrel and the upper handguard can be left off for those of you that prefer just running a lower.

A 20mm Railed MK18 Handguard for AR Platform AEGs and GBB replicas, which is ideal for those searching for the 'Special Forces' look. It is constructed to a lovely standard from Aluminium and features Numbered Rail Slots for the precise placement of accessories. The bottom Rail measures a total of 21.3cm, and the other three at 24.4cm. If you're looking to spice up your AR with some external furniture, then a Handguard swap is a great place to start.

A set of Two Scope Rings for 25mm Optics, which easily attach to 20mm RIS/RAS Rail Systems to install your Rifle Scope on an Airsoft Gun. They have a two piece design which makes installation very easy, and come included with an Allen Key to help. These rings are Low Profile, meaning your Scope will be mounted snugly to your Rail System.

This outer barrel is a replacement original part for the Army Armament R601 JW3 GBB pistol but should also be compatible with other Army Armament Hi-capas and 1911 GBB pistols. The barrel is constructed from alloy and comes with 12mm CW female threads at the tip, leaving options open for adding a tracer unit or suppressor using a 14mm CCW male thread adapter (available separately). The barrel may also be suitable for other Hi-capa and 1911 pistols based on the original TM design but may require modifications to be made for smooth function.

The barrel is finished in bronze and has authentic looking mock locking lugs across its upper surface, with "9x19" marked on the chamber area in recessed lettering. The barrel has a standard flared profile which tapers towards the chamber, matching the more common real steel Hi-capa barrels perfectly.

An Airsoft bipod with rubber feet for stabilizing Airsoft platforms while shooting from fixed positions. This bipod is compatible with any rifle which has a Picatinny 20mm rail for mounting but also comes with an L96 spigot mount for using this rifle on L96-type rifles with the spigot socket at the front of the stock.

If you are an AK rifle fan you may be feeling left out with all the modern, westernised spitfire tracer units entering the market right now, but 5KU are here to get you into the muzzle flash game! The 5KU PBS-1 Spitfire Tracer Unit is styled after the Soviet-era PBS-1 AK suppressor and includes apparatus to mount the unit on either 24mm AK threads or more common 14mm CCW male threads found on almost all Airsoft rifles. If you are after a more stealthy look for your AK, with the added benefit of being able to use tracer BBs and dazzle the enemy with an ultra-bright muzzle flash effect, the 5KU PBS-1 Spitfire Tracer Unit is what you need!

The AK series of rifles is famous for many things, but having the best iron sights is not one of them. The AK Rear Sight Rail For Red Dot Optics from 5KU replaces your AK's rear iron sight but retains basic functionality with its built-in emergency backup sights while providing the option to mount a red dot sight!

Designed specifically for Micro red dot sights, the 8 20mm Picatinny rail slots provide plenty of room for larger red dots but it would look rather silly. It's your AK though, make the purists cry if you feel like it!

A replacement outer barrel for M4/15/16 variants that is constructed entirely from a strong and durable Alloy.

If you need something to support the weight of your sniper rifle setup, you can't go wrong with a bipod! The AGM PH-Style Telescopic Bipod for Harris Lug is compatible with common Harris-style sling/bipod lugs found on the stocks of most sniper rifles, including M40A1, M24 and VSR-10 replicas. 

Constructed from hefty alloy with a steel sling loop built-in, the PH-Style bipod boasts adjustable leg length via the pair of catches on each and the bipod feet are wedged so you can dig into soft ground for perfect stability. The legs can be deployed and stowed in an instant by squeezing the legs together, and thanks to the included spigot mount, you can quickly detach the bipod if you need to reduce weight. If you find yourself sniping from a static position more often than not, this bipod will be an asset to your setup!

A set of two High Profile Scope Mount Rings, which will accept a 25mm Optic and easily install to 20mm RIS/RAS/Picatinny Rail Systems. These mounts are High Profile, which means they will hold your Optic a little higher than standard, which is ideal for those who use Lower Face Protection and struggle to aim down their Scope. Being a two-piece design, and coming included with an Allen Key, they are very easy to install.

If your dust cover has fallen off and been lost, the CYMA Ejection Port Dust Cover for M4/AR-15 AEG is the solution! This replacement original part is designed for the CYMA CM.097 AEG series but should also fit M4/AR-15 AEGs from other brands. The dust cover is constructed from steel but does not include the long bar/pin needed to mount it to an AR receiver, so make sure you still have yours and you should be set!

A replacement for the original selector lever on your AK AEG. Available in two types; Type A with an extension or Type B which is a standard AK selector lever. These are designed for CYMA AK rifles but should be compatible with most other AK AEGs.

A replacement for the original selector lever on your AK AEG. Available in two types; Type A with an extension or Type B which is a standard AK selector lever. These are designed for CYMA AK rifles but should be compatible with most other AK AEGs.

One of the few problems with old-school cool like the SMG5 series of AEGs is that you are rather limited in rail mounting space, meaning your mission essential equipment that makes you a true operator has to be left behind. Ask the US Navy SEALs, they are known to use pipe clips and zip ties to attach rails to their MP5SD6s. You no longer have to resort to this pure bodgery, with the Extended top rail mount from CYMA you now have a Picatinny scope mount with forward M-LOK sections for tactical weapon lights, lasers, battery boxes, or anything else you need. This is all kept at the 12 o'clock position, keeping your ambi friendly SMG just that. 

If you have ever missed a kill because you had to pull off target to adjust magnification, this mount was designed with you in mind! The Ghost Quick Zoom Sliding Scope Adjuster for 20mm Picatinny Rail allows you to adjust the magnification of any adjustable mag riflescope with a rotary adjuster from a firing grip while you keep your reticle on target! Gone are the days of awkward body mechanics when adjusting your optic, giving you more opportunity to bag those all important kills in game!

The Quick Zoom Sliding Scope Adjuster is constructed almost entirely from CNC machined aluminium with steel cables and a polymer sliding button and can be fitted to any Airsoft rifle with a minimum top rail length of approximately 38cm. A spacer is included for longer setups, keeping the adjustment cables protected from snags, and also included in the box is an upper scope ring segment with a 20mm Picatinny rail built-in, allowing a micro red dot sight to be added to the setup as a backup. This combination of a dual ring scope mount, sliding button, spacer and an MRDS mount gives you a whole lot of alu for your money, and even more skirmish utility!

Looking to make your SMG-5 AEG even more compact? Perhaps you had an accident with your previous stock and need a replacement? Here it is, and at a price that makes sense even for a more affordable SMG-5.

A Polymer constructed Thumb Rest for 20mm RIS Rail Systems, which will provide a stable platform to comfortably brace the front of your replica, enhancing ergonomics and improving comfort when aiming for long periods of time.

If you have ever felt like you messed up buying a rifle with a 14mm clockwise threaded barrel, weep no more! This 14mm CW to 14mm CCW thread adapter attaches to any 14mm CW male thread and provides a 14mm CCW male thread for the addition of more common CCW threaded accessories!

If you have lost your AK AEG charging handle spring, rod or top cover retention latch you are in luck! The CYMA Charging Handle Rod & Spring Set for AK47/74 AEG is an original replacement part set for CYMA AKs but should also fit other Tokyo Marui clone AK series AEGs as well. The set includes the charging handle spring, guide rod and top cover retention latch.