Two-Tone Airsoft Submachine Guns

A Gas Blowback Airsoft 6mm BB Gun, designed to look and function just like the real steal variant, giving the user Recoil when fired using the Gas Bolt System. The Weapon is constructed in the same way as the real weapon, with an Alloy Receiver and a Polymer Foregrip and Lower Receiver. This compact SMG-5 variant offers an impressive rate of fire with great gas efficiency during the summer. The weapon features multiple fire modes, ranging from safe to full auto, with the most impressive being the Three Round Burst Option, making it great for up close and personal fire fights. The weapon features an ambidextrous fire selector and magazine release making it great for left handed shooters, as well as a rear swivel sling plate for carrying the weapon whilst not in use. This weapon is great for any Airsofter looking for a new and compact Submachine Gun for both outdoors and CQB sites, and can even be used as a secondary weapon for Airsoft Snipers or DMR Players.

The Heckler & Koch MP7A1 - Anyone and everyone who's taken a remote interest in firearms at some point will have stumbled across this exceptional piece of authentic weaponry, famous for its compact and effective design the MP7A1 is an inimitable platform and now YOU, yes you can get your hands on one of H&K's finest productions.

A compact and lightweight submachine gun, perfect for CQB sites or as an introductory weapon, with an instantly recognisable design, as well as rails on the top and sides for additional customisation options.

If you are kicking yourself for not buying one of the KWA GBB Vectors when they were available, you are in luck. The KWA version may be long gone, but Krytac has its own GBBR KRISS® Vector and it is finally here!

The Krytac KRISS® Vector is constructed predominantly from high-density fibre-reinforced polymer with an aluminium skeleton beneath, giving it low weight and absolutely unbeatable rigidity. Being a GBB platform, the Krytac Vector handles the same way as the real deal, with ambidextrous fire selector switches, a fully functional charging handle and a ferocious gas blowback action, pumping out dramatic clouds of gas along with immersive recoil with each shot. 

Unlike more conventionally designed GBBRs, the Krytac KRISS® Vector has a remarkably lightweight bolt carrier which cycles in the realistic “super-V” style; up and down instead of forward and backwards. This means better gas efficiency than equivalent platforms, more controllable recoil and a higher rate of fire, hitting out at up to 17 rounds per second. EPIC!

The HOP-up unit is adjustable, as we might expect, but this is a TDC HOP-up unit which uses VSR-10 pattern HOP-up rubbers and inner barrels, giving you access to the very best in the precision inner barrel and HOP-up rubber aftermarket. TDC units are the most effective type of HOP-up available, providing direct pressure to the upper surface of the HOP-up rubber, effectively eliminating side-to-side shot deviation. If you're searching for a GBB primary which is as much of a statement to look at as it is to shoot, the KRYTAC KRISS® Vector GBBR is the unconventional platform you need!

If you are kicking yourself for not buying one of the KWA GBB Vectors when they were available, you are in luck. The KWA version may be long gone, but Krytac has its own GBBR KRISS® Vector and it is finally here!

The Krytac KRISS® Vector is constructed predominantly from high-density fibre-reinforced polymer with an aluminium skeleton beneath, giving it low weight and absolutely unbeatable rigidity. Being a GBB platform, the Krytac Vector handles the same way as the real deal, with ambidextrous fire selector switches, a fully functional charging handle and a ferocious gas blowback action, pumping out dramatic clouds of gas along with immersive recoil with each shot. 

Unlike more conventionally designed GBBRs, the Krytac KRISS® Vector has a remarkably lightweight bolt carrier which cycles in the realistic “super-V” style; up and down instead of forward and backwards. This means better gas efficiency than equivalent platforms, more controllable recoil and a higher rate of fire, hitting out at up to 17 rounds per second. EPIC!

The HOP-up unit is adjustable, as we might expect, but this is a TDC HOP-up unit which uses VSR-10 pattern HOP-up rubbers and inner barrels, giving you access to the very best in the precision inner barrel and HOP-up rubber aftermarket. TDC units are the most effective type of HOP-up available, providing direct pressure to the upper surface of the HOP-up rubber, effectively eliminating side-to-side shot deviation. If you're searching for a GBB primary which is as much of a statement to look at as it is to shoot, the KRYTAC KRISS® Vector GBBR is the unconventional platform you need!

The first Airsoft replica of an AR-9, the real-steel AR15 rifle receiver chambered in 9mm pistol ammunition. AR-9 pistols and carbines have become extremely popular in the United States, due to their modularity, familar AR15 style controls, and compact nature. The G&G ARP9 is constructed from high-density polymer with an aluminium M-LOK handguard and includes a compact PDW stock, making this AEG a great choice as a CQB primary for those who want a more modern, high-speed submachine gun with an aggressive design aesthetic. 

The first Airsoft replica of an AR-9, the real-steel AR15 rifle receiver chambered in 9mm pistol ammunition. AR-9 pistols and carbines have become extremely popular in the United States, due to their modularity, familar AR15 style controls, and compact nature. The G&G ARP9 is constructed from high-density polymer with an aluminium M-LOK handguard and includes a compact PDW stock, making this AEG a great choice as a CQB primary for those who want a more modern, high-speed submachine gun with an aggressive design aesthetic. 

The CYMA CM.041G is a new model in the Platinum Series, which offers a solid external build combined with awesome internal components, for an SMG-5 experience like no other. With an internal MOSFET, CNC Steel Gears and more contained within a reinforced Version 2 Gearbox, this is one of the finest SMG-5s available at the moment. Quoted to have a ROF of 25RPS and a very fast trigger response, this is perfect for getting gritty up at the front of the skirmish.

Whether you are a sniper looking for a compact AEG backup or want something short and light to take advantage of your agility, the Cybergun P90 is perfect for the job. This AEG boasts full metal construction, realistic trademarks licenced by FN Herstal itself and ambidextrous controls, perfect for left-handed shooters or those who like to shoot from both shoulders to make the best use of cover.

The internals are based around the TM P90 design, meaning a version 6 gearbox, rotary HOP-up unit and full compatibility with aftermarket upgrades for the TM P90. Also fitted are a 6.03mm tightbore inner barrel for an improvement in accuracy potential and 8mm bushings for a smoother gearbox report and a slight increase in rate of fire. If you like to move fast and crawl in the woods, the P90 is your best friend!

The VMP-1 platform is VORSK's first foray into GBB submachine guns and is built on the foundation of VORSK’s expertise in producing some of the best affordable GBB platforms on the market today. The VMP-1 makes use of the control layout of the MP9 platform but with an entirely new external style, complete with a side folding stock/brace setup and a unique QD suppressor mounting system built into the muzzle itself. 

If you need something mightier than a pistol but more compact than a rifle, the VORSK VMP-1 is the perfect happy medium and promises to be a serious beast in the hands of CQB specialists and snipers looking for a sidearm with extra firepower!

The ASG Scorpion EVO 3 A1 is designed from the official specs of the real steel CZ Scorpion Evo Carbine created by Česká zbrojovka Uherský Brod, then built from the ground up for Airsoft By ActionSportsGames in Denmark. 

This edition of the Scorpion EVO is the 2020 revision of the original EVO featuring upgraded, rebuilt and more streamlined parts for better operation and more compatibility with aftermarket extras for those who like to upgrade. If you have a military-style EVO build planned, this is the version you need to spoof the EVOs issued to Canadian, Ukrainian and Czech soldiers!

The ASG Scorpion EVO 3 A1 is designed from the official specs of the real steel CZ Scorpion Evo Carbine created by Česká zbrojovka Uherský Brod, then built from the ground up for Airsoft By ActionSportsGames in Denmark. 

This edition of the Scorpion EVO is the 2020 revision of the original EVO featuring upgraded, rebuilt and more streamlined parts for better operation and more compatibility with aftermarket extras for those who like to upgrade. If you have a military-style EVO build planned, this is the version you need to spoof the EVOs issued to Canadian, Ukrainian and Czech soldiers!

The ASG Scorpion EVO 3 A1 is designed from the official specs of the real steel CZ Scorpion Evo Carbine created by Česká zbrojovka Uherský Brod, then built from the ground up for Airsoft By ActionSportsGames in Denmark. 

This edition of the Scorpion EVO is the 2020 revision of the original EVO featuring upgraded, rebuilt and more streamlined parts for better operation and more compatibility with aftermarket extras for those who like to upgrade. If you have a military-style EVO build planned, this is the version you need to spoof the EVOs issued to Canadian, Ukrainian and Czech soldiers!

If you're in the market for what is probably the most iconic SMG design the world has ever known but you want it cheap, the Jing Gong JG069 SMG-5J SMG AEG should suit you perfectly. This SMG-5 AEG replicates one of the most modern SMG-5 variants, the "J" model first issued to the Japanese Armed Police, and is constructed predominantly from high density polymer to keep the build light, agile and affordable. 

Internally, the JG069 is based on the Tokyo Marui SMG-5 A5, meaning full compatibility with aftermarket upgrades for its basic yet functional alloy version 2 gearbox. All of the iconic SMG-5 details are present externally, including its claw-mount compatible receiver, tri-lug muzzle device and ambidextrous fire controls. If you need an SMG-5 in lightweight and cost-effective form, the Jing Gong JG069 SMG-5J SMG AEG is exactly that!

Featuring an integrated suppressor and collapsible stock, this is for all you stealthy spec ops players out there.

Perfect for a starter Close Quarters Battle thanks to it's compact size, it features everything you need to get into some action, such as adjustable Hop-up, rotary drum design sights and lightweight design, so you can move from objective to objective with ease, quietly picking off targets on the way.

If you have plans to upgrade an SMG-5 to shoot like a laser beam, with the rate of fire of a minigun, why bother doing all the legwork and fine-tuning yourself? The Bolster Tuned CM.041 SMG-5 Upgraded AEG; Warhead Edition is the latest generation of the well-received Bolster Tuned CM.041 series, put together by the same team that built the ultra-high-end Bolster Armouries ONYX AEG series and benefits from all the experience and expertise gained from a lifetime of Airsoft tech work and several successful Bolster Tuned AEG drops.

This new generation of Tuned SMG-5 is rocking a Warhead 27K Brushless Motor, Bolster Armouries EZO bearings, a Bolster Armouries AOE Correction Washer along with complimentary parts to keep it running reliably long term. Replacing the basic CYMA ETU, we have the space-aged Gate ASTER™ ETU, offering a wealth of programming options and equipped with the latest EXPERT Firmware. The HOP-up has been modified with Bolster Armouries HOP-up screws for better air seal and setting retention and a Prometheus Purple HOP-up rubber and Nub was added to extend the range out to 60 meters and beyond. An FPS Softair Carbon Fibre Reinforced Tappet Plate ensures reliable feeding with the powerful Warhead brushless motor and an SHS Hardened Steel D Type Pinion Gear was added to cope with the higher levels of torque and speed. Unlike other custom Airsoft gun services, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

A lot of extra work was put in to refine the mass-produced CYMA gearbox and make it run like a Bolster. The inner surfaces of the gearbox have been polished for reduced friction and modified to house the ASTER™ ETU. The cylinder windows have been radiused, increasing the strength of the shell to withstand the force of repeated piston impacts and the bearing holes have been smoothed out to reduce friction. The angle of engagement has also been corrected, meaning 11.1V LiPo's are a go for the upgraded CM.041 so you can hose the enemy down with a torrent of BBs like a fireman hoses a blaze.

With upgrades added and work done, the price has increased, but by a far smaller margin than it would if you took a stock CM.041 to a technician and paid for this amount of work to be done. Finally, we can pick up and play with an exceptionally well-built AEG with all the fine-tuning necessary for exceptional performance already complete, and done with care, to an exacting standard. 

When we tested the Warhead Edition we were absolutely stunned; it's even faster than the original Tuned CM.041! 320 FPS on the dot with remarkable consistency, 60m+ effective range and an absolutely scary rate of fire of 27 rounds per second; more than enough to outshoot anything else you can buy off the shelf!

If you have plans to upgrade an SMG-5 to shoot like a laser beam, with the rate of fire of a minigun, why bother doing all the legwork and fine-tuning yourself? The Bolster Tuned CM.041 SMG-5 Upgraded AEG; Warhead Edition is the latest generation of the well-received Bolster Tuned CM.041 series, put together by the same team that built the ultra-high-end Bolster Armouries ONYX AEG series and benefits from all the experience and expertise gained from a lifetime of Airsoft tech work and several successful Bolster Tuned AEG drops.

This new generation of Tuned SMG-5 is rocking a Warhead 27K Brushless Motor, Bolster Armouries EZO bearings, a Bolster Armouries AOE Correction Washer along with complimentary parts to keep it running reliably long term. Replacing the basic CYMA ETU, we have the space-aged Gate ASTER™ ETU, offering a wealth of programming options and equipped with the latest EXPERT Firmware. The HOP-up has been modified with Bolster Armouries HOP-up screws for better air seal and setting retention and a Prometheus Purple HOP-up rubber and Nub was added to extend the range out to 60 meters and beyond. An FPS Softair Carbon Fibre Reinforced Tappet Plate ensures reliable feeding with the powerful Warhead brushless motor and an SHS Hardened Steel D Type Pinion Gear was added to cope with the higher levels of torque and speed. Unlike other custom Airsoft gun services, Bolster Tuned platforms are all pre-built and ready to ship the next day with no lead time!

A lot of extra work was put in to refine the mass-produced CYMA gearbox and make it run like a Bolster. The inner surfaces of the gearbox have been polished for reduced friction and modified to house the ASTER™ ETU. The cylinder windows have been radiused, increasing the strength of the shell to withstand the force of repeated piston impacts and the bearing holes have been smoothed out to reduce friction. The angle of engagement has also been corrected, meaning 11.1V LiPo's are a go for the upgraded CM.041 so you can hose the enemy down with a torrent of BBs like a fireman hoses a blaze.

With upgrades added and work done, the price has increased, but by a far smaller margin than it would if you took a stock CM.041 to a technician and paid for this amount of work to be done. Finally, we can pick up and play with an exceptionally well-built AEG with all the fine-tuning necessary for exceptional performance already complete, and done with care, to an exacting standard. 

When we tested the Warhead Edition we were absolutely stunned; it's even faster than the original Tuned CM.041! 320 FPS on the dot with remarkable consistency, 60m+ effective range and an absolutely scary rate of fire of 27 rounds per second; more than enough to outshoot anything else you can buy off the shelf!

A brilliant and affordable alloy construction 6mm BB Airsoft replica suppressed SMG-5, with solid polymer stock. The suppressor actually reduces the noise of the AEG when it fires!

If you're into historical platforms and seek the most realistic experience, check out the S&T PPSh-41 EBB Submachine AEG; Real Wood! This beast boasts full metal construction and a gorgeous real wood stock, making use of a high proportion of steel in the build for an authentically hefty feel in the hands and a truly realistic experience. The iconic PPSh-41 silhouette is completed with the included drum magazine which is constructed from steel and holds an incredible 2000 BBs. While this PPSh-41 is compatible with both stick and drum magazines from S&T, the included drum is probably enough!

To make matters all the sweeter, the S&T PPSh-41 has an Electro-Mechanical blowback mechanism which cycles the mock bolt each time you fire with an exciting "clack clack clack". We would be lying to you if we said this was proper recoil, but the slight jolt and mechanical noise as you fire makes this retro SMG a real blast to shoot, way more interesting than a standard AEG. 

Inside the unique gearbox shell we have 18:1 ratio steel gears running on 8mm steel slide-bearing bushings and the rotary HOP-up unit is paired with a 6.03mm tightbore inner barrel to give you the edge in accuracy. If you're in search of a WW2-era Ruskie replica well suited to a highly mobile playstyle, the S&T PPSh-41 EBB Submachine AEG; Real Wood is a fine choice!

The CYMA CM.041H is a new model in the Platinum series, which offers a solid external build combined with awesome internal components, for an SMG-5 experience like no other. With an internal MOSFET, CNC steel gears and more contained within a reinforced Version 2 Gearbox, this is one of the finest SMG-5s available at the moment. Quoted to have a ROF of 25RPS and a very fast trigger response, this is perfect for getting gritty up at the front of the skirmish.

It's the submachine gun that can be fired from a brief case! At just 33cm long, the CM.041J is a replica Airsoft gun which blurs the lines between Submachine gun and Machine Pistol.

If you like the compact form of the SMG5K but are a 21st-century Airsoft combatant and you require ultra-modern features to complete your mission, the CM.041L was designed with you in mind. This AEG takes the already impressive full metal CM.041K platform and adds an M-LOK handguard, M-LOK 20mm Picatinny hybrid optics rail and an ambidextrous magazine release which can be actuated using the trigger finger from a firing grip for a smooth and fast emergency reload. 

On the inside this AEG has the Platinum high speed upgrade treatment, boasting a high speed motor, high speed gear set and an ETU/MOSFET pre-installed for a spectacular rate of fire and trigger response. Also inside you'll find a tight bore inner barrel for extra accuracy from this compact AEG submachine gun.

If you like folding things or dream of carrying your full loadout in a backpack, the G&G FAR9 Folding AR-9 AEG will make you very happy! This folding AR-9 platform is kitted out inside with the same internals featured in the phenomenal ARP9 3.0, including the G&G G3 programmable MOSFET, MIG V2 gearbox and 25K high torque motor. The reputation of the ARP9 as CQB king is maintained with the FAR9, with the added benefit of its unique party trick!

These internal goodies are housed in a strong high-density polymer body which offers both a folding stock and folding front end. The stock is the G&G CHFS stock found on the ARP9 and ARP556 3.0 but the front end is entirely unique, allowing the FAR9 to be folded up to measure a minuscule 25 x 15 x 21cm! The folding process requires you to follow a very specific process to avoid damage, so make sure you read the "Special Instructions" section of the full product description and watch the attached video before attempting to fold yours!

The FAR9 follows the G&G tradition of innovating in ways other manufacturers dare not, pairing unique functionality with bomb-proof, proven internals and performance that is hard to beat. If you love a nifty feature which will draw crowds with performance that will make the enemy team turn tails and run, the G&G Armament FAR9 Folding AR-9 AEG belongs in your arsenal!

The Thompson M1A1 is a World War Classic Sub Machine Gun, however, it found its spotlight within darkened back alleys of a Mafia-Run New York City and was catapulted into infamy as the go-to gun for Gangsters and Lawmen during the 1920s due to it's large magazine capacity and high rate of fire. The CM.033 Does an excellent job of preserving the traditional aesthetics of the M1A1, featuring an alloy body and faux wood furniture, the 0.33 is a must-have for any classic Mafia fanatic.

If you're looking for a cheap and easy way to start close-range skirmishing, this is it! The Evolution Reaper S EMR S Carbontech AR-9 SMG AEG; Starter Set includes an AEG, a magazine, a foregrip, 2000 BBs, a speedloader, a 7.4V Li-ion stick battery and a balance charger. Everything you need to start skirmishing right away!

This Evolution SMG is surprisingly advanced, given its price. It features an alloy handguard, a 6.01mm tightbore inner barrel, plenty of reinforced internals for durability and a quick-change spring for easy power tuning. If you're looking for a cheap Airsoft gun which comes skirmish-ready, the Evolution Reaper S EMR S Carbontech AR-9 SMG AEG; Starter Set is definitely for you!

If you are looking for an SMG but you have experience with the M4/AR-15, an AR-9 platform would suit you perfectly. The Zion Arms PW9 MOD.1 follows the AR-9 design format but is constructed with a CNC 7075 T6 aluminium receiver and handguard making it lighter than a beachball while maintaining superb strength. Unlike many other Airsoft AR-9 SMGs, the PW9 is based on a real steel design, the R&D Precision PW9, and boasts licenced trademarks on its handguard as a homage to the real thing.

The story only gets sweeter when it comes to internals! Inside the PW9 we are treated to a polished 6.03mm tightbore inner barrel, rotary HOP-up unit, a quick change ball bearing spring guide, 19K RPM high-speed motor and the Zion Arms Nebula ETU to top it all off. The Nebula allows you to program the trigger for burst modes of different durations and also improves trigger response and rate of fire by reducing electrical resistance. If you have a mobile playstyle and appreciate a high speed SMG with phenomenal build quality you will definitely appreciate the Zion Arms PW9!

If you're looking for a cheap and easy way to start close-range skirmishing, this is it! The Evolution Reaper XS EMR Carbontech AR-9 SMG AEG; Starter Set includes an AEG, a magazine, a foregrip, 2000 BBs, a speedloader, a 7.4V Li-ion stick battery and a balance charger. Everything you need to start skirmishing right away!

This Evolution SMG is surprisingly advanced, given its price. It features an alloy handguard, a 6.01mm tightbore inner barrel, plenty of reinforced internals for durability and a quick-change spring for easy power tuning. If you're looking for a cheap Airsoft gun which comes skirmish-ready, the Evolution Reaper XS EMR Carbontech AR-9 SMG AEG; Starter Set is definitely for you!

If you put realism above all and appreciate an immersive firing experience, the Umarex BERETTA PMX will be an asset to your arsenal. This unique SMG was only revealed in the real steel world a handful of years ago and is derived from the iconic Beretta M12 SMG but redressed for 21st-century combat.

The PMX boasts ambidextrous controls across the design, a high density polymer upper and lower receiver with an aluminium sub-receiver, ambidextrous steel sling points and the front and rear and a rock solid side folding stock which combines the best aspects of other folding stock designs. The highlight of the PMX is its gas blowback action, providing immersive recoil with each shot and a 100% realistic manual of arms, meaning racking the charging handle before the first shot and hitting the bolt catch after a satisfying reload. If you love the challenge of working a GBBR under pressure and appreciate snappy and violent recoil, you'll love the Umarex BERETTA PMX.

If you are stuck between an upgraded pistol or a GBB SMG for CQB or sniper backup duty, why not get both in one? The APS Black Hornet Plus GBB SMG is a complete set including a unique upgraded EU18 style GBB pistol, an APS carbine kit and a proper laundry list of accessories so you can run it either as a fully decked-out SMG or a suppressed pistol at your leisure.

This kit represents great value when you consider the plethora of accessories and options included. The heart of this beast, whether you run it in the carbine kit or as a suppressed pistol is its extended 47rnd CO2 magazine and 165mm 6.03mm steel tightbore inner barrel giving it the power, gas efficiency, cold resistance and range to outdo practically anything its size. If you struggle to choose between a GBB pistol and SMG, now you don't have to!

If you usually run an M4/AR-15 platform and you want familiar controls in a platform which looks like nothing else out there, the Zion Arms PW9 Long Handguard is definitely worthy of your scrutiny. This pre-upgraded AR9 SMG platform boasts full metal construction, making use of CNC machined 7075 T6 aluminium in its handguard and receiver for top-tier build quality, high strength and low weight.

On the inside, the PW9 is equally impressive. Featuring a 6.03mm tightbore inner barrel, 8mm ball bearing bushings, a quick change spring system and the Zion Arms Nebula ETU/MOSFET, allowing for burst mode, binary trigger or semi-auto only to be programmed using the fire controls of the gun itself. A 19K RPM high speed motor gives it the speed to compete, and the Nebula makes this even better thanks to its compatibility with 11.1V LiPo batteries. If you need a lightweight yet rock-solid primary which is ready to go toe-to-toe with the best, the Zion Arms PW9 Long Handguard will be an asset to your gameplay!