Airsoft Stocks

A Polymer Solid Stock for SMG-5 replicas, which easily bolts on to SMG-5 Airsoft Guns to provide a stable aiming platform and a large battery compartment if your AEG is rear wired.

A very clever little replacement adjustable stock designed to enhance the ergonomics of M4 and M16 type Airsoft Electric Guns and make your Airsoft gun more controllable. 

A very clever little replacement adjustable stock designed to enhance the ergonomics of M4 and M16 type Airsoft Electric Guns and make your Airsoft gun more controllable. 

A Polymer constructed Sliding/Collapsible Stock for AR Platform M4/M16 replicas, which can be set to multiple lengths on the Buffer Tube, and comes included with both a thick and thin Rubber Butt Pad.

A very low-profile and slim replacement M4 stock that provides a comfortable and slim line back end to your Airsoft gun for improved control. 

A sliding stock for AEG buffer tubes which is constructed from high-density Polymers for a tough n' tight fit.

If your primary weapon is boasting a 1913/20mm Picatinny stock setup you now have some fresh new stock options thanks to 5KU! The 1913/20mm Picatinny Folding Skeleton Stock w/Folding Butt Plate is designed to mount to any 20mm Picatinny rail, but please, don't mount it to your handguard!

The stock itself is constructed from aluminium with weight reducing cuts throughout, and the folding/mounting mechanism is constructed from steel to provide the prerequisite strength. This stock is ideal for super compact setups with its folding butt plate, and its raised cheekpiece provides superb sight alignment. This stock can be mounted directly to the Sig Air MCX or MPX, or any AEG with a 1913/20mm stock adapter, providing an ultra-compact solution when folded, with full functionality when deployed! Get this on your MPX, it deserves it!

Want to make your Airsoft rifle more comfortable? An enhanced stock is what you need! The Specna Arms Crane Enhanced Carbine stock is constructed from high-density polymer, with steel QD sling sockets on either side, a steel adjustment pin and a rubber butt plate for added grip in all weather conditions. This stock is easy to install and simply requires you to lift the adjustment lever up and slide the stock onto your buffer tube. This stock will fit any AEG spec M4/AR15 buffer tube, including M4/AR15 stock adapters for Airsoft AK AEGs, SMG-5 and AR36 AEGs.

Looking to make your SMG-5 AEG even more compact? Perhaps you had an accident with your previous stock and need a replacement? Here it is, and at a price that makes sense even for a more affordable SMG-5.

If you are in the mood to build your own Honey Badger or PDW style M4/AR-15 this stock is an essential part! The CYMA PDW Stock for M4/AR-15 AEG fits the standard M4/AR-15 AEG rear receiver interface, replacing your usual buffer tube with a more compact alternative with a sliding stock mechanism built in.

The buffer tube in this set is constructed from alloy and the stock bars and locking latch are constructed from steel to provide strength and realistic weight. The butt plate is constructed from high density polymer with linear serrations to promote grip, and the set also includes the bolt and washer required to mount the stock. If you want to shorten your M4/AR-15 up for CQB duties, this is what you need!

If you're running your AAP-01 or AAP-01C as a primary, the Action Army Folding Stock Kit for AAP-01 GBB Pistols provides an extra point of contact for improved accuracy and range and looks fantastic as a bonus! This sleek, minimalist folding stock kit is compatible with the AAP-01 and AAP-01C from Action Army, mounting via the hammer housing pin & rear sight. 

The stock offers length of pull adjustment, an adjustable cheek riser and side folding functionality, making it the equivalent of a SCAR or ACR stock but with a far more compact design well suited to the lightening fast AAP-01. Also moulded as part of the stock base we have a 20mm Picatinny optics rail, allowing you to mount a red dot sight or scope to your AAP to enhance its functionality as a primary. 

Steel QD sling sockets are present on either side of the toe of the stock, along with an additional socket beneath the stock mount, ideally placed for single-point slings. If you love the way your AAP-01 shoots but want to extend your effective range and turn it into a mean little carbine, the Action Army Folding Stock Kit for AAP-01 GBB Pistols is what you need to get the job done!

Treat your M4 to this Arcturus advanced stock. Constructed from high density polymer, with an angular design and flat textured and rubberised butt plate, this stock is both comfortable and has a sleek, smooth aesthetic that's sure to complement the look of your AR platform.

This stock is for AEG buffer tube, the adjustment lever is contained within the A-frame of the stock, to reduce snagging.

If your primary weapon is boasting a 1913/20mm Picatinny stock setup you now have some fresh new stock options thanks to 5KU! The 1913/20mm Picatinny Folding Visor/Respirator Stock is designed to mount to any 20mm Picatinny rail, primarily those found on MPX and MCX rifles, and other AEG/GBB primaries with 1913/20mm Picatinny stock mounting apparatus. Feel free to mount it to any rail on your AEG, but don't blame us for the funny looks!

The stock body is constructed from aluminium to keep the weight low, and the butt plate is rubber with linear texture to promote positive grip, with or without body armour. The folding/mounting mechanism is constructed from steel to provide the strength needed, and the QD sockets on either side of the stock are also steel, and fully functional. The Visor/Respirator stock is designed specifically to provide perfect sight alignment when wearing bulky face gear, allowing you to see down your optic without requiring a riser and increasing height over bore.

If you are rocking a primary with a 1913/20mm Picatinny stock interface, this should be of interest! The SigAir 1913/20mm Picatinny Telescoping Folding Stock is compatible with the SigAir MPX, MCX and any other Airsoft gun with a 1913/20mm Picatinny stock mounting interface. 

Amongst its many tricks, the 1913/20mm Picatinny Telescoping Folding Stock can fold to the side, be adjusted into any of 6 lengths of pull settings and includes a steel QD sling socket on either side. With official licencing from SigAir and full Sig Sauer trademarks, this stock is the perfect addition to a cutting-edge realism-focussed build!

A lightweight and low profile stock for M4 Platform Airsoft Electric Guns which have an AEG style Buffer Tube at the rear. If your motto is 'High Speed, Low Drag', then this stock is perfect for you.

If you're working on an old-school AR build this stock would be perfect! The CYMA CAR15/XM177 Old-school Stock for M4/AR-15 is based on the original XM177 sliding stock but is constructed from a modern high-density polymer, offering weight savings and improved strength while keeping the old-school aesthetic. The adjustment lever is on the bottom, as it is on most M4/AR-15 stocks, and the stock also includes a sling slot/loop built in, ideally suited for strap slings and paracord slings. The stock should fit almost any M4/AR-15 buffer tubes, including both AEG and GBBR types.

Those building a Blackhawk Down or Blood Diamond style AR platform; this stock is what you need to have your build looking perfect. If you are building an L119A1, this stock is also a fantastic stand-in for the "Fiberlite" stock used on the platform in its early life, and while not 100% perfect, most won't notice the difference!

You can now customise the stock on your SIG MCX! Been wanting to run an AR collapsible Stock? Well, now you can! The Airsoft Artisan M4/AR-15 Buffer Tube Adapter for SIG MCX/1913 Stock Interface allows you to mount a milspec buffer tube, either real steel or GBBR style onto your 1913/20mm stock interface equipped platform, whether it's an MCX, MPX or otherwise!

You wanted an SMG-5K so you got one, then after a while of running it you wanted an SMG-5 with a stock and you think to yourself "Damn! I godda fork out another £150 on a new SMG-5!? 😩" Well do we have a treat for you! A Stock that attaches to your SMG-5K and turns it into the ultimate PDW, it's retractable and extendable and constructed from a lovely alloy making for a super tough construction.

Turn your boring SSG10 or VSR-10 sniper rifle into a futuristic-looking rifle from a galaxy far far away! The Novritsch SSG10 A3 Stock has a lightweight and skeletonised design, perfect for those who enjoy sniping but like to get a bit more stuck in and charge around the battlefield. There are a lot of practical features that come included with this stock, the stock is foldable for easier transport, the cheek rest is fully adjustable and the handguard features M-LOK rail sections on either side.

You will have to install this stock yourself, only attempt if you are confident in your ability and understanding. Do not attempt if you are unsure as it can lead to damage.

This stock creates a menacing image for your SSG10 or VSR-10 platform, with the Novritsch SSG10 A3 Stock you are sure to out-manoeuvre and out-class all those who dare to test you!

Infinitely functional and incredibly comfortable. Dubbed the Light Ops Stock, Specna Arms takes the rear of your rifle to the next level. This stock will attach to any buffer tube and will function far better than your stock (no pun intended) rear piece.

With a rubberised butt plate for comfort when held against your person, this stock goes even further. This stock also has the genius feature of having rubberised cheek rests on either side, not only to provide additional comfort, but also to provide extra friction so when your Aiming down your sights your less likely to slip, allowing you to maximize your confirmed kill potential in the field.

The Light Ops Stock really lives up to its name, being constructed from lightweight polymer, which won't compromise the weight ratio of your rifle. Being a PDW stock, it is extremely slimline, making your rifle better suited for fast past close-quarters style gameplay. The cheek piece of the stock is cylindrical, avoiding potential snags and has rubberised sections on either side with Specna Arms "SA" texture to provide a positive and comfortable cheek weld.

Infinitely functional and incredibly comfortable. Dubbed the Heavy Ops Stock, Specna Arms takes the rear of your rifle to the next level. This stock will attach to any buffer tube and will function far better than your stock (no pun intended) rear piece. With a rubberised butt plate for comfort when held against your person, this stock goes even further than that! This stock also has the genius feature of having rubberised cheek rests on either side, not only to provide additional comfort, but also to provide extra friction so when your Aiming down your sights your less likely to slip, allowing you to maximize your confirmed kill potential in the field.

Although branded as 'Heavy Ops' this stock, it's anything but, being constructed from lightweight polymer, which won't compromise the weight ratio of your rifle. The rubberised butt plate is removed by pushing together the two side pins revealing the battery compartment within. The compartment is wide enough to house a crane stock battery and with an inner length of roughly 17cm, you have ample room to house larger batteries for longer gameplay. The slide adjuster is also widened and textured for ease of adjustment, making you ready for any situation.

This is one for the AK lovers! The Russian Firearm Fanatics and the Weekend Gopnik Operators, here to complete the tactical aesthetic of your AK is the 5KU PT-3 Telescopic Stock, featuring a full alloy construction and a rubber butt pad, this replica PT-3 Classica stock is a fine addition to your Eastern Operator loadout.

If you're looking for a way to make your giant G3 AEG more compact, the Jing Gong Sliding Stock for G3 AEGs will do the trick! Designed to fit Jing Gong and Tokyo Marui G3 AEGs, this stock offers 2 positions of adjustment. The stock can be deployed by pushing the adjustment lever on the bottom towards the left, after which it can be pulled out and into place. 

The stock base and butt plate are constructed from high density polymer and the stock bars are alloy, keeping weight to a minimum and providing strength where needed. The butt plate boasts deep serrations for optimal grip in any weather conditions and the stock base includes a sling loop for conventional strap slings. Whether you're working on a G3A4 build or you want to fit your G3 into a smaller gun bag, the Jing Gong Sliding Stock for G3 AEGs is ideal!

Turn your regular airsoft rifle into a DMR-ready monster with the Novritsch DMR Stock. It doesn't only look the tactical part, but it also features a fully adjustable and modular cheek rest so you can line up the perfect shot without the neck pain! This is a must-have for any semi-auto skirmisher who wants a stock that will ensure the edge over their opponent. It is designed to fit over a regular AR/M4/M16 buffer tube, both electric and gas-powered rifles.

Looking for one of the best PDW stocks on the market, both in form and function? The Krytac Trident PDW stock is what you've been searching for! This stock is constructed with steel stock bars and a steel locking mech to guarantee effective long term function and has a uniquely modern style that was until now exclusive to the Krytac Trident PDW AEG. This PDW stock is remarkably compact, with no wasted space whatsoever and enough room for a standard buffer tube type 7.4V LiPo 1300mAh stick battery with space to spare. If you are building a custom PDW AEG, the Krytac CSS2 PDW stock's compact and well thought out design makes it hard to beat!