All Sniper Rifles

If you've set your sights on a sniper rifle but don't want to break the bank, the WELL PRO MB03AE Bolt Action Sniper Rifle; Upgraded Version is a fantastic option! Based on the original MB03, a close copy of the TM VSR-10, the AE version is upgraded on the inside with a 6.03mm tightbore inner barrel, a steel spring guide, 90-degree piston/trigger sear set and reinforced steel parts throughout the trigger group.

This makes the MB03AE robust enough internally to handle higher power springs, though the pre-installed APS-2 spec mainspring puts out an impressive 412 FPS approximately with 0.2g BBs. Externally, the MB03AE is simple and functional, equipped with a 20mm Picatinny receiver rail for your scope, front and rear sling points and a 20mm Picatinny bipod rail on the bottom, ready to be kitted out sniper rifle style. A spiral-fluted aluminium outer barrel adds a bit of visual interest and style to make it stand out next to the original MB03 and the reprofiled bolt handle ensures you don't scrape your knuckles on your optic when working the bolt.

As far as entry-level sniper rifles go, the MB03AE is a cut above the rest and boasts a fantastic quality polymer stock with a textured finish, indicating fibre reinforcement. If you want to sample Airsoft sniping without getting in too deep financially, the WELL PRO MB03AE Bolt Action Sniper Rifle; Upgraded Version is the perfect thing!

If you like the iconic Dragunov SVD but you don't want a rifle a mile long, the SVD-S should suit your preferences! The CM.057S Dragunov SVD-S is constructed entirely from metal with a large proportion of steel parts and is a perfect replica of the SVD variant issued to Russian paratroopers and mechanised infantrymen, the SVD-S. The SVD-S has a shorter barrel and muzzle device than the original, and also has a pistol grip and folding stock at the rear instead of the SVD thumbhole stock. This is a Dragunov for the Airsoft marksman on the move!

This AEG is based on the Real Sword SVD design which means it is already locked to semi auto and uses a custom gearbox design with an advanced gear adjustable TDC HOP-up unit. This superb internal design pairs perfectly with the super long 590mm inner barrel to make the SVD-S a great base platform for a DMR build. If you are after a long-range platform and want something with a folding stock for better portability, the SVD-S is the right tool for the job!

Based on a prototype Begadi design, this futuristic and sci-fi-looking gun is an Airsoft electric DMR rifle and ready to rock straight out of the box! The Ares Otto Repa SOC SLR Sniper Rifle (MSR-SOC)  features a fully adjustable bipod and cheek rest, an inbuilt monopod and even an inbuilt and fully functional red dot laser!

Combine this with a full metal external construction with majority CNC 6063 Aluminium and alloy parts, and you get a realistic Airsoft replica that almost breaks the scales at 6.1 kg! Naturally, this means the MSR-SOC is not for the slouches, but more for those who value the realistic marksman experience and role, taking time to choose your position and prioritising concealment over mobility. 

Internally, the MSR-SOC is a pure-bred DMR, with a unique gearbox shell boasting plenty of compatibility with common version 2 gearbox parts for the upgrade fiends. As it comes, the MSR-SOC has an enormously long 670mm inner barrel and hits out at approximately 430 FPS straight out of the box, with a super snappy trigger response thanks to the pre-installed EFCS MOSFET and plenty of strength thanks to the piston's full steel tooth rack. If you want to take a walk on the wild side and run a DMR rifle nobody else has, the Ares Otto Repa SOC SLR Sniper Rifle (MSR-SOC) is what you need!

If you skirmish in a suit with a silverballer, you need this rifle! The Ares MSR-WR Takedown Sniper Rifle Kit with Hard Case is one of the coolest Airsoft guns we've seen in some time; a unique takedown-style bolt action sniper rifle which can be disassembled in minutes to be stored in its own unique hard case.

The set also includes a mini bipod with extendable legs which mounts to the pre-installed bipod spigot on the front of the chassis, giving you everything you need to get sniping other than your choice of optic, though Ares left space inside the hard case for an optic or suppressor, depending on your needs.

Internally, the MSR-WR (M200/EDM200) is compatible with upgrade parts for the Ares TX sniper rifle system, broadly based on the VSR-10 design, though we are currently unable to confirm VSR compatibility. The HOP-up unit is a TDC type using a grub screw to adjust, promising an improved ability to hold its setting and less side-to-side deviation than a standard VSR slider HOP-up. Out of the box, the MSR-WR hits out at a tasty 420 FPS using 0.2g BBs and its short and easy bolt pull makes it fantastic for rapid follow-up shots. If you're a fan of takedown rifles or want an assassin-style primary for your Agent 47 loadout, the Ares MSR-WR Takedown Sniper Rifle Kit with Hard Case will suit you perfectly!

A spring-powered Airsoft bolt action Sniper Rifle which is a replica of the ever-popular M40A5, and comes with 3 x magazines and a Polymer rail system for the handguard.

Looking to challenge your CQB skills? Or maybe you need a compact counter-sniper rifle to carry along with your other gear? Action Army provides with the T11 Shorty. Based on the fabled Marui VSR-10, this rifle has no shortage of upgrade potential, and set up in this unique configuration presents some interesting niche opportunities for the skirmisher in the field.

UMAREX Presents a fully licensed, Gas Blowback Heckler & Koch PSG1, arguably one of the most popular and sought after Airsoft Guns in the world, the PSG1 harbours a unique and authentic quality like no other, so if you're a PSG-1 fanatic, it's your lucky day.

If you have your sights set on a sniper rifle but want something with a more militant look, the CM.702B M24 from CYMA is exactly what you need. This spring bolt action sniper rifle is based on the real steel M24 SWS, the US Army's standard sniper rifle and comes equipped with a 6.03mm tightbore inner barrel straight out of the box!

As far as affordable sniper rifles go, this is one of the most consistent we have seen, hovering around the 500 FPS mark on 0.2g BBs with only a couple of FPS deviation between shots. While it isn't based on the VSR-10 system, it is compatible with upgrade parts for the Classic Army CA/M24 but for all but the most particular snipers, upgrades shouldn't be necessary. Just slap a scope on top and get busy from your hide in the woods!

For those of you looking to get into Airsoft, or start your sniper loadout, this could be gun for you.

Great out of the box, delivering a consistently high FPS, between 420-500fps. A Sniper rifle that can be used without any upgrades and features a lightweight ergonomic build, with a satisfying bolt action and tightbore barrel.

For those of you looking to get into Airsoft, or start your sniper loadout, this could be gun for you.

Great out of the box, delivering a consistently high FPS, between 420-500fps. A Sniper rifle that can be used without any upgrades and features a lightweight ergonomic build, with a satisfying bolt action and tightbore barrel.

A bolt action, spring powered sniper rifle with an aggressive and modern aesthetic. This is perfect for the sniper who wants an up-to-date rifle which is easily transported thanks to the folding stock.

If you are into WW2 reenactment or a Japanese history buff, then S&T has just the thing for you! The S&T Type 38 Bolt-Action Airsoft Rifle Replica; Real Wood is a near-immaculate replica of the original Type 38 Rifle Carbine that the Japanese used during WW2. The Carbine variant was intended for use by cavalry, engineers and other roles where a full-sized rifle would be a hindrance. It is made from real wood giving it that authentic feel and weight.

S&T's Type 38 replica follows a similar format to the real steel rifle, boasting a beautiful antique finish on its metal components and stunning real wood furniture to make a rifle that belongs in a glass cabinet when it's not out on the skirmish field. If you need a wall hanger, or you're going for a unique look on the battlefield, there is no better way to stand out than with the S&T Type 38 Bolt-Action Airsoft Rifle Replica; Real Wood!

If you are a fan of the iconic British Lee Enfield rifle, you are going to want to sit down for this! The Ares Rifle No.4 MK.I (T) rifle is constructed entirely from metal and real wood comes with an authentic replica No.32 MK.I scope and is supplied in a polymer hard storage case which is designed to look like the real wooden crates in which Enfield rifles were supplied, but with the water resistance and rigidity of a modern polymer hard case.

The Ares No.4 MK.I (T) is one of the best Lee Enfield replicas we have ever seen, and the fact that this is the sniper rifle variant makes it even cooler. Rejoice, we have entered a golden age of Airsoft where Lee Enfields are plentiful!