Airsoft Rifle Magazines

If you are looking for mags for your Double Eagle EMG Noveske N4 MWS you have found them! These magazines are designed for the Double Eagle Noveske N4 MWS GBBR and unfortunately don't fit the Tokyo Marui M4A1 MWS ZET System GBBR. Thought we would get the bad news over with early!

The mag is constructed with a high-density polymer shell and alloy internals and can be loaded through the feed lips at the top of the mag body with a speed loader, preferably one with a GBB adapter. The gas fill valve is on the rear of the magazine, just below the knocker valve, and the mag is compatible with both green gas and red gas.

The design of the externals is down to Double Eagle themselves, who have added an over-insertion stop at the front of the magazine to prevent the feed lips from being damaged after a reload under pressure. On each side of the body, there is also anti-slip dot texture to prevent the magazine from being dropped and the front of the mag also features finger grooves so it can be used as a makeshift grip when shooting from unconventional positions.

If you are looking for mags for your Double Eagle EMG Noveske N4 MWS you have found them! These magazines are designed for the Double Eagle Noveske N4 MWS GBBR and unfortunately don't fit the Tokyo Marui M4A1 MWS ZET System GBBR. Thought we would get the bad news over with early!

The mag is constructed with a high-density polymer shell and alloy internals and can be loaded through the feed lips at the top of the mag body with a speed loader, preferably one with a GBB adapter. The gas fill valve is on the rear of the magazine, just below the knocker valve, and the mag is compatible with both green gas and red gas.

The design of the externals is down to Double Eagle themselves, who have added an over-insertion stop at the front of the magazine to prevent the feed lips from being damaged after a reload under pressure. On each side of the body, there is also anti-slip dot texture to prevent the magazine from being dropped and the front of the mag also features finger grooves so it can be used as a makeshift grip when shooting from unconventional positions.

Need some extra firepower for your AK AEG? The NUPROL 1200rnd Electric drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to repel an ambush. This drum magazine is constructed from high-density polymer with a modern design aesthetic and is a low profile alternative to full sized AK drums, allowing you to get lower in the prone position to make the most of the surrounding cover.

If you are looking for high-cap mags for your Airsoft M4 but you want reduced weight so you can carry more, we admire your spirit and wish you well in your quest for victory through volume of fire. The NUPROL 380rnd L-Mag will be an asset to you thanks to its ultra-low weight and exceptional capacity. This mag crams an extra 80 rounds in over a standard M4 high-cap, and is lighter as well, thanks to its polymer construction. This magazine can be loaded through the fill window at the top of the magazine and is wound up using the winding wheel on the baseplate.

The external design of this magazine is patterned after the popular real world "L" magazine and includes all the details one would expect to see, such as textured panels on either side of the mag body for extra gripping qualities, and mock witness windows. This magazine is compatible with most M4/AR15 AEG rifles but should also work in SCAR and 416 AEGs.

If you need magazines but you also want to add a more realistic look to your M4/AR15 the NUPROL W-Mag would be a great choice. 

This magazine holds 380 BBs and is loaded through the feed window, located on the top of the magazine bod. This magazine is constructed from strong polymer, while still being lightweight, allowing you to carry more mags while speeding round the field.

Being a flash mag, the magazine is reloaded by pulling the bottom winding cord located under the base plate, keeping you in the fight for longer. 

This magazine takes its name from the mock witness windows located on either side of the magazine, through which you can see convincing mock 5.56 cartridges which add a touch of realism to any Airsoft M4/AR15 AEG.

If you need magazines but you also want to add a more realistic look to your M4/AR15 the NUPROL W-Mag would be a great choice. 

This magazine holds 380 BBs and is loaded through the feed window, located on the top of the magazine bod. This magazine is constructed from strong polymer, while still being lightweight, allowing you to carry more mags while speeding round the field.

Being a flash mag, the magazine is reloaded by pulling the bottom winding cord located under the base plate, keeping you in the fight for longer. 

This magazine takes its name from the mock witness windows located on either side of the magazine, through which you can see convincing mock 5.56 cartridges which add a touch of realism to any Airsoft M4/AR15 AEG.

A Mid-Cap Magazine for M4/M16 Platform Airsoft Guns, which is made with a Steel Outer Shell to make it tough, well weighted and realistic. It has a 'stubby' design as seen in the M16s of the Vietnam War Era, and is a Spring-Loaded design which will feed all the BBs until empty without the need for winding. This is ideal for DMRs or Period Replicas, or for anyone who wants Mid-Cap Magazines that are low profile and won't get snagged on your kit as much as full size ones.

A Mid-Cap Magazine for M4/M16 Platform Airsoft Guns, which is made with a Steel Outer Shell to make it tough, well weighted and realistic. It has a 'stubby' design as seen in the M16s of the Vietnam War Era, and is a Spring-Loaded design which will feed all the BBs until empty without the need for winding. This is ideal for DMRs or Period Replicas, or for anyone who wants Mid-Cap Magazines that are low profile and won't get snagged on your kit as much as full size ones.

For those of you looking for an ultra-modern styled mid cap, this is the one you're after!

Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.

The mag features a check and dot pattern ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout.

If you have an AK with an incredible rate of fire, you will need some enhanced magazines to keep up! Introducing the TPM-AK, the latest enhanced magazine from PTS Syndicate, the number 1 name in high performance Airsoft magazines. The TPM-AK is compatible with practically any AK AEG but is styled after 5.56mm AK magazines available on the civilian market in the US. This magazine is a spring fed mid-cap and can be loaded using a speedloader through the fill/feed port on the top of the mag.

With the release of the J Series from Specna Arms comes their line of J Series Mags. If you own a J series and need some spare mags to go with your new beauty, you've come to the right place. Even if you don't own a J Series and fancy yourself a new ultra modern magazine, you'd be hard pressed to find a better mag than this.

This magazine is a mid cap variant, meaning that it holds a medium amount and is filled at the top using a speed loader. Unlike high-cap mags there is no 'battle rattle' so if you're a more sneaky type of player mid-cap mags are for you.

The magazine is constructed from high density polymer and features a matte colour and a somewhat rough texture with additional friction for a satisfying feel and for ease of loading. On either side of the mag you can see a modern checked texture for the modern battlefield.

Only with AKs can get you can get a mag like this, so AK fanboys count yourself lucky. Styled after the Russian design of the AK quad stack magazine, this AEG flash magazine holds a whopping 1000 rounds so you can stay on the field without changing mags for a crazy amount of time.

With a textured front and back for easy mag grippage, the magazine is reloaded using the top fill window and being a flash mag, it is wound (reloaded) at the bottom using the pull cord.

So if you're a fan of AKs and hate reloading, this chunky boy is for you!

If you are rocking a modernised AK AEG these magazines will suit it well! The CYMA 140rnd "Waffle" Mid-Cap Magazine for AK AEG is patterned after real steel Bulgarian AK-47 magazines also sold in the US under the brand "Circle 10". The magazine has waffle texture on the outside to promote positive grip and is constructed from rigid high density polymer, meaning an accidental drop doesn't result in scratches! If you need AK mags for a PMC or modern mercenary loadout, these are perfect!

If you need AR36 AEG mags, these should do the trick! The CYMA 150rnd Mid-Cap Magazine for AR36/SL8 AEG fits both AR36 and SL8/9 platform AEGs and is constructed from a translucent brown polymer, just like the real thing. Each magazine holds 150 BBs and can be loaded from the top using an Airsoft speed loader or loading tool.

The external design of the magazine matches that of the real rifle, including a reinforcement rib on the front and an over-insertion preventing ledge, meaning even if you slap this magazine home quite hard, it won't damage your HOP-up unit. On each side of each mag, there are magazine linking lugs which can be used to connect two or more mags together, allowing for faster reloads "redi-mag" style and keeping a second magazine handy and allowing you to get back in the fight without having to fumble with pouches.

Looking for a fast winding high-capacity AK magazine? The NUPROL 500rnd High-Cap Magazine is designed to work with AK47/74 AEG rifles but is a 7.62x39mm style magazine with a significant curve, making it ideal for AK47s and AKM rifles. The mag is a flash magazine high-cap and can be filled through the fill window at the top of the magazine body and is tensioned via the winding cord which is hidden beneath the hinged baseplate and can be accessed by pulling the baseplate down from the front.

This mag holds an impressive 500 BBs, meaning in most cases you will not need to reload in an entire battle round unless you are particularly heavy on the trigger! The magazine is constructed from stamped steel with the classic AK reinforcing ribs stamped into each side, making it great for old-school AK setups and OPFOR loadouts.

If you're getting gassed up for the GBBR season and you're running a CGS or TM ZET system GBBR, fill your rig with these! The CYMA 30rnd Green Gas Magazine for M4/AR-15 CGS & ZET GBBR is compatible with both CYMA CGS and Tokyo Marui ZET system M4/AR-15 GBBRs and is a green gas magazine with the fill valve on the rear of the steel STANAG style body.

The mag can be loaded through the feed lips at the top of the magazine, though this can be challenging with a standard speed loader without a GBBR adapter. As with the original TM and CYMA GBBR magazines, these mags include the bolt stop components which lock the bolt open at the end of a mag, and each mag holds 30 BBs. 

A 30 Round Green Gas Magazine for the UMAREX Heckler & Koch HK416A5 Airsoft Gas Blowback Rifle and also compatible with VFC M4/AR-15 GBBRs. 

If you need the best mags around coupled with the best BBs, here you go! The Elite Lock 'n' Load bundle pairs 2 of the best AR AEG mags around, the PTS EPM 1 250rnd Mid-cap with the best BBs out there, G&G's Competition Grade 0.28g BBs. If you run a high performance M4/AR-15 AEG platform, this bundle was made with you in mind!

If you want more ammo on your AK but drum mags aren't your thing, this mag very well might be! The CYMA 1100rnd Electric High-Cap Dual Magazine for AK47/74 AEG is styled after a pair of real steel 7.62 x 39mm magazines clamped together with a mag coupler, complete with detailed dummy cartridges for a more realistic look. This magazine should be compatible with any AK47/74 AEG rifle but is ideal for 7.62 x 39mm chambered AK replicas such as the original AK-47, AKM and AK-103, to name but a few!

This magazine holds an incredible 1100 BBs and can be wound up in 3 different ways; using the winding button, the manual winding wheel just like any other high-cap, or via the sound control function which will wind the magazine as it detects you shooting. 

Filling the mag can be done through the fill window on the top of the mag body and the manual winding wheel is on the baseplate, as it is in most high-cap mags. The button which controls the auto-winding/sound control function can be found on the left side of the dummy magazine, and if you want to wind the mag using the winding wheel make sure you have this switch in the central (off) position. To power the magazine you will need 3 x AAA cells (not included) but if you don't have any lying about the night before the skirmish you can always use the winding wheel and stay in the fight with a whopping 1100 rounds at your disposal!

For those of you that prefer a more classic AK style, this magazine sports the old school Bakelite look for a more authentic loadout. The magazine holds 450 rounds and is a high-cap design in that it is wheel-wound at the bottom, meaning that you can get a tonne of shots in without having to swap mags.

The magazine also features a ridged texture on the front of the mag to allow for better grip when loading/reloading.

If you run a G3 platform AEG and you need mags with no rattle and decent capacity, Fuxing has you covered! This magazine is constructed with a steel shell and polymer internals and is a copy of the most common G3 magazine style seen in the real steel world. The externals include an over-insertion stop on each side and reinforcing ribs giving it a realistic look, and on the inside this is a spring-loaded mid-cap mag, meaning no battle rattle as you move!

The magazine can be loaded through the fill/feed port at the top of the magazine body using a speedloader or loading tool and holds a very respectable 150 BBs; more than enough to keep pace with the M4 and AK users. These mags should fit any Tokyo Marui clone G3 AEG platform, including the G3A3, G3A4, G3 SAS, MC51 and PSG1. Compatibility with the LCT G3 series is yet to be confirmed.

If you are rocking the big boy SCAR-H AEG from Double Bell you will need some big boy mags to go with it! The Double Bell 400Rnd High capacity magazine is intended for their BY-805 SCAR-H AEG, and is a wheel wound high capacity magazine. The winding wheel is located at the bottom of the magazine, and the fill window is on the top. All you need to do to ready this mag for battle is fill it up with BBs through the fill window, then wind the magazine using the wheel on the base plate. This magazine has a steel shell and polymer internals, giving it a realistic feel and high strength.

If you are rocking the big boy SCAR-H AEG from Double Bell you will need some big boy mags to go with it! The Double Bell 400Rnd High capacity magazine is intended for their BY-805 SCAR-H AEG, and is a wheel wound high capacity magazine. The winding wheel is located at the bottom of the magazine, and the fill window is on the top. All you need to do to ready this mag for battle is fill it up with BBs through the fill window, then wind the magazine using the wheel on the base plate. This magazine has a steel shell and polymer internals, giving it a realistic feel and high strength.

If you need some big mags for your big boy AR, the SR25, this should do the job! The NUPROL 130rnd W-Mag Mid-Cap for SR25 is styled to suit modern setups and has a rubberised baseplate for extra grip during a reload and also allows for the "mag podding" technique to be used on smooth surfaces. This mag is a windowed design, meaning it has mock witness windows on either side showing mock 7.62x51mm cartridges inside for a realistic look. The magazine can be filled through the fill/feed port at the top of the magazine body using an Airsoft speed loader or loading rod.

This magazine is compatible with the Classic Army pattern of SR25, meaning it should work in the A&K and CYMA SR25 rifles as well, but will not fit ARES/Secutor or G&G patterns. The style of this magazine is a great fit for any modern SR25 platform and has a waffle textured surface for enhanced grip and strength, and a "dot matrix" at the bottom on each side so you can numerically mark your magazines.

Need some extra firepower for your AK AEG? The NUPROL 1200rnd Electric drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to repel an ambush. This drum magazine is constructed from high-density polymer with a modern design aesthetic and is a low profile alternative to full sized AK drums, allowing you to get lower in the prone position to make the most of the surrounding cover.

This is the sound control variant of this magazine, meaning you have the choice of winding the mag when you need it using the switch or letting the magazine wind itself in time with the noise of your AEG firing.

If you are rocking the EC-202, EC-203 or EC-204 you will need some mags to keep it doing what it does best. The East Crane 110rnd Mid-Cap Magazine for EC-202/203/204 AEG is constructed with a transparent polymer shell and a steel feed spring, showcasing detailed mock 7.62x51mm cartridges inside for that realistic look. This mag is compatible with the EC-202, EC-203 and EC-204 AEG series but will not fit other 417-style Airsoft guns. 

This is a mid-cap magazine, meaning it is loaded through the fill/feed port at the top of the mag using a speed loader or loading rod. Thanks to its spring-loaded design you will never experience the dreaded battle rattle while carrying this mag, making it great for milsim skirmishers and those who prioritise stealth!

A medium capacity spring fed magazine that replicates a real world mag that's incredibly popular with civilian shooters. The magazine has a tough high quality Polymer exterior that feels great in the hand thanks to the unique hex cut out design, and the ridges that run up the length of the front and back of the magazine.

Holding 140rnd , the mag is a mid-cap type, meaning there is no rattle in comparison with hi-cap magazines and is filled using a speed loader at the top. If you need a high quality magazine that meets your demands, want a unique design to finish off that modern-era rifle or simply want to carry more ammunition in the field without annoying rattle sounds - you can count on these magazines.

If you are Milsim-curious and occasionally give skirmishing a go with real-cap magazines, the ARCTURUS 30/130rnd Variable-Capacity Magazine for M4/AR-15 AEG is the perfect mag to fill your rig with. These magazines have adjustable capacity, meaning you can switch between a realistic 30-round capacity and a more skirmish-friendly 130-round capacity. Like a standard mid-cap, these mags are loaded through the fill/feed port at the top of the magazine using an Airsoft speed loader or loading tool.

To switch capacity, simply remove the screw retaining the baseplate, slide the internals of the magazine out through the top and flick the switch on the magazine's internal shell. Being styled after real steel STANAG magazines, these mags are compatible with most M4/AR-15, SCAR-L, 416 and SA80 AEGs and are constructed with an authentic steel shell with reinforcement ribs stamped on each side. If you fancy giving Milsim a try but you aren't ready to commit, these mags are a great place to start!

If you have an AK, but you ain't no Russian, this is the magazine you will probably want. The Modern Mid-cap Magazine from CYMA is compatible with most Airsoft AK47/74 series AEGs and is patterned after modern AK rifle magazines sold on the US civilian market. This magazine is straight in profile, making it realistic for AK rifles in 5.56mm and 5.45mm Russian, and its waffle style external ribs provide the modern look and superb gripping qualities, ensuring you have a firm grip on your magazine during a fast reload. The magazine is constructed from polymer with a steel feed spring, and can be loaded through the fill/feed port on the top of the magazine body using a speed loader or loading rod.

Introducing a unique and efficient interlocking magazine system. Simply place the mags together at the small circular extrusions at 90 degree angles, twist and boom! Locked in place.

This means you can have multiple mags locked and ready to reload without the need of mag pouches, plus it doesn't have to be just two interlocking mags, it could be more depending on how adventurous you're feeling!

Constructed from high density polymer with a translucent design, this magazine holds 150 BB's and is a mid-cap magazine, meaning no battle rattle! The magazine can be filled through the fill/feed port at the top of the magazine using a standard Airsoft speed loader.