Airsoft Rifle Magazines

If you're planning on running your GBBR through winter or fancy mag dumping like it's going out of fashion without the dreaded "cooldown" effect, the Army Armament HPA P30 Adapter for M4/AR-15 AEG Magazines; CGS/MWS System is what you need! 

A collaborative project between Army Armament and T8 Systems, this HPA adapter is designed for the Tokyo Marui M4/AR-15 ZET System and the CYMA CGS M4/AR-15 GBBR series, allowing standard AEG mags to be used along with a High Pressure Air (HPA) power source. The set includes both an EU and US HPA connector but you will need an airline, HPA bottle and regulator to run this adapter. 

The advantages of using HPA when performance is concerned include the elimination of FPS fluctuation due to the "cooldown" effect, resulting in improved shot-to-shot consistency and improved accuracy down range, especially under rapid fire. If you're already running HPA you probably have all the bits to make this work already and experience shoulder-thumping recoil through the frosty months!

If you want a magazine for every season and you're running a CGS or TM ZET system GBBR, get one of these! The CYMA 30rnd Green Gas/HPA Gas Magazine for CGS/MWS GBBRs is compatible with both CYMA CGS and Tokyo Marui ZET system M4/AR-15 GBBRs and has a green gas fill valve and a HPA line attachment point on the rear of the STANAG style body.

The mag can be loaded through the feed lips at the top of the magazine, though this can be challenging with a standard speed loader without a GBBR adapter. As with the original TM and CYMA GBBR magazines, these mags include the bolt stop components which lock the bolt open at the end of a mag, and each mag holds 30 BBs. 

To use this magazine with HPA lines, instead of swapping the whole magazine when out of ammo, you can purchase separate quick-detach BB tubes. By pulling the tab rearwards on the bottom of the magazine you can remove the internal BB tube and then insert another one. This means that you can carry way more BBs without the hassle of large magazines occupying your rigs!

Whether you feel like using gas or HPA, this magazine has you covered for all occasions and is the perfect all-year-round gas magazine, just make sure to get some separate BB tubes if you plan on using HPA!

The world's best Airsoft Magazine just got better! Made to a seriously tough standard using excellent materials, the EPM-1 Magazine holds a massive 250rnds in a Spring-Fed Mid-Cap design. This means that you still get the incredible feeding performance of a PTS Mid-Cap, but with a capacity that can rival most High-Cap Magazines!

If you need to load up on M4/AR-15 mid-caps, the Specna Arms 125rnd S-Mag Mid-Cap Magazine for M4/AR-15 AEG; Set Of 5 is ideal! This great value magazine multipack includes 5 S-Mag Mid-caps holding 125 BBs each, loaded through the fill/feed port at the top of the mag body using a speed loader, as with other mid-caps.

The S-Mag boasts a uniquely modern design, patterned after popular real steel polymer magazines with SA texture on each side to improve grip and wet weather handling. These magazines are known for their robust nature, wide compatibility and low weight and should fit and feed in almost any M4/AR-15 AEG out there, along with other compatible platforms such as 416 AEGs, SCAR-L AEGs and L85 AEGs. If you want to load up on mid-caps in one go, this is one of the best (and most affordable) ways to do it!

If you need to load up on M4/AR-15 mid-caps, the Specna Arms 125rnd S-Mag Mid-Cap Magazine for M4/AR-15 AEG; Set Of 5 is ideal! This great value magazine multipack includes 5 S-Mag Mid-caps holding 125 BBs each, loaded through the fill/feed port at the top of the mag body using a speed loader, as with other mid-caps.

The S-Mag boasts a uniquely modern design, patterned after popular real steel polymer magazines with SA texture on each side to improve grip and wet weather handling. These magazines are known for their robust nature, wide compatibility and low weight and should fit and feed in almost any M4/AR-15 AEG out there, along with other compatible platforms such as 416 AEGs, SCAR-L AEGs and L85 AEGs. If you want to load up on mid-caps in one go, this is one of the best (and most affordable) ways to do it!

Whether you use a Specna Arms M4/AR-15 AEG or need affordable M4 mid-caps to expand your firepower, the 125rnd S-Mag Mid-cap is what you need. This magazine is constructed from high-density polymer with a steel feed spring and is loaded through the fill/feed port at the top of the magazine body, just like other mid-caps.

The S-Mag is compatible with the vast majority of M4/AR-15 AEGs and should also fit most 416, SCAR-L and L85 AEG replicas. Being a mid-cap, this magazine won't give you away with the dreaded battle rattle as you run and is ideal for sneaky skirmishers looking for more capacity!

Whether you use a Specna Arms M4/AR-15 AEG or need affordable M4 mid-caps to expand your firepower, the 125rnd S-Mag Mid-cap is what you need. This magazine is constructed from high-density polymer with a steel feed spring and is loaded through the fill/feed port at the top of the magazine body, just like other mid-caps.

The S-Mag is compatible with the vast majority of M4/AR-15 AEGs and should also fit most 416, SCAR-L and L85 AEG replicas. Being a mid-cap, this magazine won't give you away with the dreaded battle rattle as you run and is ideal for sneaky skirmishers looking for more capacity!

Whether you use a Specna Arms M4/AR-15 AEG or need affordable M4 mid-caps to expand your firepower, the 125rnd S-Mag Mid-cap is what you need. This magazine is constructed from high-density polymer with a steel feed spring and is loaded through the fill/feed port at the top of the magazine body, just like other mid-caps.

The S-Mag is compatible with the vast majority of M4/AR-15 AEGs and should also fit most 416, SCAR-L and L85 AEG replicas. Being a mid-cap, this magazine won't give you away with the dreaded battle rattle as you run and is ideal for sneaky skirmishers looking for more capacity!

If you need affordable Mid-cap magazines for your M4/AR-15 AEG you're going to want to check this out! The Delta Armory 120rnd DMAG Mid-cap Magazine is designed to fit M4/AR-15 AEGs and is styled after a well-known polymer real steel magazine, complete with waffle-style gripping texture.

The magazine is loaded just like any other Airsoft mid-cap, through the fill/feed port at the top of the magazine body using a speed loader or loading tool. The magazine is also marked on either side with the capacity (120) and the Delta Armory logo. If you need cheap M4 mags to complete your loadout, this is as cheap as they come!

If you need affordable Mid-cap magazines for your M4/AR-15 AEG you're going to want to check this out! The Delta Armory 120rnd DMAG Mid-cap Magazine is designed to fit M4/AR-15 AEGs and is styled after a well-known polymer real steel magazine, complete with waffle-style gripping texture.

The magazine is loaded just like any other Airsoft mid-cap, through the fill/feed port at the top of the magazine body using a speed loader or loading tool. The magazine is also marked on either side with the capacity (120) and the Delta Armory logo. If you need cheap M4 mags to complete your loadout, this is as cheap as they come!

Another excellent quality product from PTS, a 170rd Mid Cap magazine for those of you looking for a more low profile but reliable magazine option.

If you are loading up on magazines and you want to avoid the battle rattle of a loadout full of high-cap mags, mid-caps are the best solution! These mid-cap magazines from CYMA hold 150 rounds, and can be loaded through the fill/feed port at the top of the magazine using a standard Airsoft speed loader. The magazine is constructed with a steel shell and feed spring, with polymer internals. The exterior design of this magazine matches the widely issued NATO STANAG magazine type and will fit in with any M4/AR15 loadout from practically any time period or military organisation. This magazine is compatible with the vast majority of M4/AR15 AEG rifles, and has the added bonus of a slightly higher capacity than the average mid-cap!

For those of you looking for an ultra modern styled STANAG magazine this is what you're looking for.

Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.

The mag features a check and dot pattern ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout.

If you are looking for M4/AR-15 AEG magazines that are a cut above the rest, the PTS Syndicate 150rnd EPM Gen.2 Enhanced Polymer Magazine is the one to go for! This is the Gen.2 version of the EPM, building on the superb design of the original by adding improved gripping texture on the exterior, compatibility with Magpul MAGLINK® magazine couplers and a new, more rigid Zytel polymer baseplate.

Like the usual mid-cap magazine, the EPM Gen.2 is loaded through the fill/feed port at the top using an Airsoft speed loader or loading rod/tool and has no battle rattle whatsoever, making it great for milsim inclined skirmishers and those who prioritise stealth when skirmishing. All of the enhancements from the original EPM design have been retained, including the magazine well guides at the top of the shell which eliminate wobble, the witness window showcasing mock cartridges with a clear section to confirm the mag is fully loaded and the high visibility orange follower so you can confirm when your mag is empty.

With a wide range of compatibility, a high-strength compression spring and Dupont Zytel polymer construction, you would be hard pressed to find a better magazine for M4/AR-15 AEG compatible platforms!

If you are looking for M4/AR-15 AEG magazines that are a cut above the rest, the PTS Syndicate 150rnd EPM Gen.2 Enhanced Polymer Magazine is the one to go for! This is the Gen.2 version of the EPM, building on the superb design of the original by adding improved gripping texture on the exterior, compatibility with Magpul MAGLINK® magazine couplers and a new, more rigid Zytel polymer baseplate.

Like the usual mid-cap magazine, the EPM Gen.2 is loaded through the fill/feed port at the top using an Airsoft speed loader or loading rod/tool and has no battle rattle whatsoever, making it great for milsim inclined skirmishers and those who prioritise stealth when skirmishing. All of the enhancements from the original EPM design have been retained, including the magazine well guides at the top of the shell which eliminate wobble, the witness window showcasing mock cartridges with a clear section to confirm the mag is fully loaded and the high visibility orange follower so you can confirm when your mag is empty.

With a wide range of compatibility, a high-strength compression spring and Dupont Zytel polymer construction, you would be hard pressed to find a better magazine for M4/AR-15 AEG compatible platforms!

Looking for a unqiue modern mag for your M4? The NUPROL 380rnd H-Mag High-Cap is designed for the M4/AR15 AEG but should work in most compatible platforms and has an ultra-modern look thanks to its hex pattern texture. The magazine is a wheel wound high-cap with its winding wheel located on the baseplate and is filled via the fill window at the top of the magazine body. 

Either side of the magazine has a modern hex style texture to provide extra grip when pulling the magazine from a pouch and also has 5.56x45mm markings recessed into the design to add a realistic look. This mag would pair well with any M4/AR15 AEG setup with a cutting edge look! 

Looking for the biggest capacity with no rattle? This NUPROL 200rnd Mid-cap is an extended design, allowing an extra 70 BBs to squeeze in when compared to 30 round style mags. Its spring-loaded mechanism means you will be able to sneak around with ease with none of the tell-tale "battle rattle" you would have from high-capacity mags, and benefit from some extra firepower at the same time! This magazine is loaded just like any other Airsoft mid-cap, using a speed loader or loading rod through the fill/feed port at the top of the magazine body. The added benefit of this mag is its much more aggressive 40-round style design, which gives your rifle the "big boy" look of extra capacity, making it that more intimidating to face down with on the skirmish field.

If you are looking for high-cap mags for your Airsoft M4 but you want reduced weight so you can carry more, we admire your spirit and wish you well in your quest for victory through volume of fire. The NUPROL 450rnd L-Mag will be an asset to you thanks to its ultra-low weight and exceptional capacity. This mag crams a whopping 150 rounds in over a standard M4 high-cap, and is lighter as well, thanks to its polymer construction. This magazine can be loaded through the fill window at the top of the magazine and is wound up using the winding wheel on the baseplate.

The external design of this magazine is patterned after the popular real world "L" magazine and includes all the details one would expect to see, such as textured panels on either side of the mag body for extra gripping qualities, and mock witness windows. This magazine is compatible with most M4/AR15 AEG rifles but should also work in SCAR and 416 AEGs.

If you are looking for high-cap mags for your Airsoft M4 but you want reduced weight so you can carry more, we admire your spirit and wish you well in your quest for victory through volume of fire. The NUPROL 450rnd L-Mag will be an asset to you thanks to its ultra-low weight and exceptional capacity. This mag crams a whopping 150 rounds in over a standard M4 high-cap, and is lighter as well, thanks to its polymer construction. This magazine can be loaded through the fill window at the top of the magazine and is wound up using the winding wheel on the baseplate.

The external design of this magazine is patterned after the popular real world "L" magazine and includes all the details one would expect to see, such as textured panels on either side of the mag body for extra gripping qualities, and mock witness windows. This magazine is compatible with most M4/AR15 AEG rifles but should also work in SCAR and 416 AEGs.

Featuring dot pattern on the side and rubberised buttplate, this is for those of you looking for a more modern M4 hi-cap magazine.

This magazine holds 370 BBs and is loaded through its fill window, located on the top of the magazine body and wound using the wheel at the bottom.

This magazine is constructed from strong polymer with a rubberised baseplate complete with an extension to allow for "mag padding" and a dot matrix so you can mark your magazines for I.D and admin purposes.

This magazine takes its name from the mock witness windows located on either side of the magazine, through which you can see the internal gear and BBs, letting you know how much blasting you have left.

Featuring dot pattern on the side and rubberised buttplate, this is for those of you looking for a more modern M4 hi-cap magazine.

This magazine holds 370 BBs and is loaded through its fill window, located on the top of the magazine body and wound using the wheel at the bottom.

This magazine is constructed from strong polymer with a rubberised baseplate complete with an extension to allow for "mag padding" and a dot matrix so you can mark your magazines for I.D and admin purposes.

This magazine takes its name from the mock witness windows located on either side of the magazine, through which you can see the internal gear and BBs, letting you know how much blasting you have left.

If you need affordable Mid-cap magazines for your M4/AR-15 AEG you're going to want to check these out! The Delta Armory 130rnd STANAG Mid-cap Magazine is designed to fit M4/AR-15 AEGs and is styled after the STANAG magazine, a standard issue magazine for M4, L85/SA80, SCAR-L, HK416 rifles used in NATO militaries, amongst many others. 

The magazine is loaded just like any other Airsoft mid-cap, through the fill/feed port at the top of the magazine body using a speed loader or loading tool. If you need cheap M4 mags to complete your loadout, this is as cheap as they come!

Having more magazines in your loadout means more opportunities to get kills! The NUPROL W-Mag is the latest in NUPROL's line of AEG mid-capacity magazines, sporting a high-density polymer shell, a steel feed spring and a rubber baseplate which both protects the internals of the magazine in the event that it is dropped, and allows the magazine to be used as an improvised shooting support using a technique known as "mag-podding".  This magazine is a spring-loaded design and can be filled using a standard Airsoft speed loader through the fill/feed port at the top of the magazine.

A multi-pack of five High Cap Magazines for AR/M4/M16 Platform Airsoft Replicas. These Magazines are 'S-MAG' type Magazines which are usually included with Specna Arms Airsoft Guns, but in a gorgeous grey colour. They are High Cap Magazines that hold 380rnds each, filled by pouring BBs through the top fill window, and wound at the clockwork wheel on the base.

Whether you're new to Airsoft or you have recently picked up an AR/M4 style Airsoft Gun and want a bulk of Magazines to go with it, this is a great way to get stocked up on necessities.

A multi-pack of five High Cap Magazines for AR/M4/M16 Platform Airsoft Replicas. These Magazines are 'S-MAG' type Magazines which are usually included with Specna Arms Airsoft Guns, but in a gorgeous grey colour. They are High Cap Magazines that hold 380rnds each, filled by pouring BBs through the top fill window, and wound at the clockwork wheel on the base.

Whether you're new to Airsoft or you have recently picked up an AR/M4 style Airsoft Gun and want a bulk of Magazines to go with it, this is a great way to get stocked up on necessities.

A multi-pack of five High Cap Magazines for AR/M4/M16 Platform Airsoft Replicas. These Magazines are 'S-MAG' type Magazines which are usually included with Specna Arms Airsoft Guns, but in a gorgeous grey colour. They are High Cap Magazines that hold 380rnds each, filled by pouring BBs through the top fill window, and wound at the clockwork wheel on the base.

Whether you're new to Airsoft or you have recently picked up an AR/M4 style Airsoft Gun and want a bulk of Magazines to go with it, this is a great way to get stocked up on necessities.

A gorgeous Polymer constructed Mid-Cap magazine which is compatible with most brands of AR/M4/M16 platform rifles, including standard Tokyo Marui replicas.

A gorgeous Polymer constructed Mid-Cap magazine which is compatible with most brands of AR/M4/M16 platform rifles, including standard Tokyo Marui replicas.

Having a high-cap magazine handy may ruin your discrete advance with a bit of "battle rattle", but nothing beats the absolute storm of fire you can lay down with one of these on your AEG! The 320rnd Steel High-cap Magazine from CYMA is patterned after the real M4/AR15 STANAG magazine, with a steel shell and realistic reinforcement ribs on the outside. This magazine is a wheel wound high-cap mag, and the winding wheel can be found on the baseplate, and the fill window is located on the top of the magazine. This mag is compatible with any standard M4/AR15 AEG rifle, as well as L85 AEG rifles, 416 series AEGs and SCAR-L AEGs.

A recent magazine design that is optimized for the 416 style receiver, the NUPROL LS-Mag EXT Hi-Cap Magazine 450rnd is fully compatible with SCAR-L and M4/AR15 AEG replicas. The magazine holds 450 rounds and is filled via the top fill window. The magazine is constructed from high-density polymer with a steel feed spring, keeping the weight low but providing decent drop and scratch resistance.

The magazine design features strengthening ribs across its surfaces which also double as an area to grip when shooting your AEG in an unconventional stance. On the right side of the magazine body we can find markings indicating "30" next to a bullet symbol, and "Cal. 5.56x45" indicating the calibre of cartridge this style of magazine holds in the real firearm equivalent.

If you need more capacity, but don't want the rattle from carrying high capacity mags, this is what you'll need. With a respectable 200 round capacity, this magazine holds more than comparable mid-caps without being significantly larger than a standard M4/AR15 magazine, allowing it to fit into standard M4/AR15 mag pouches easily.

A recent magazine design that is optimized for the 416 style receiver, the NUPROL LS-Mag EXT Hi-Cap Magazine 450rnd is fully compatible with SCAR-L and M4/AR15 AEG replicas. The magazine holds 450 rounds and is filled via the top fill window. The magazine is constructed from high-density polymer with a steel feed spring, keeping the weight low but providing decent drop and scratch resistance.

The magazine design features strengthening ribs across its surfaces which also double as an area to grip when shooting your AEG in an unconventional stance. On the right side of the magazine body we can find markings indicating "30" next to a bullet symbol, and "Cal. 5.56x45" indicating the calibre of cartridge this style of magazine holds in the real firearm equivalent.

If you need more capacity, but don't want the rattle from carrying high capacity mags, this is what you'll need. With a respectable 200 round capacity, this magazine holds more than comparable mid-caps without being significantly larger than a standard M4/AR15 magazine, allowing it to fit into standard M4/AR15 mag pouches easily.

Looking for polymer high-cap magazines for your 416 or SCAR-L? Shopping for polymer mags can be tricky with these platforms, but the NUPROL 380rnd LS-Mag High-Cap magazine fills the void! This magazine is designed to fit and feed in both M4/AR15 and 416/SCAR-L AEGs, saving the trial and error and guesswork if you own one of the latter two platforms.

This magazine is constructed from strong polymer and features ribs on its external surfaces for reinforcement and to provide extra grip when reloading under pressure or in poor weather conditions. On the right side of the mag, we are treated to recessed markings, reading "Cal.5.56mmx45" and "30" with a bullet symbol above. This magazine is loaded through the fill window at the top of the magazine and is tensioned via the winding wheel on the baseplate.

A Polymer constructed Mid-Cap Magazine from KRYTAC which holds a total of 150rnds and is built to the usual high standard that you would expect of a KRYTAC product.

Looking for polymer mid-cap magazines for your 416 or SCAR-L? Shopping for polymer mags can be tricky with these platforms, but the NUPROL 150rnd LS-Mag Mid-Cap magazine fills the void! This magazine is designed to fit and feed in both M4/AR15 and 416/SCAR-L AEGs, saving the trial and error and guesswork if you own one of the latter two platforms.

This magazine is constructed from strong polymer and features ribs on its external surfaces for reinforcement and to provide extra grip when reloading under pressure or in poor weather conditions. On the right side of the mag, we are treated to recessed markings, reading "Cal.5.56mmx45" and "30" with a bullet symbol above. This magazine is loaded through the fill/feed port at the top of the magazine using an Airsoft speed loader or loading rod.

If you need more ammo between reloads, a high-cap magazine will do the trick! The Delta Armory 300rnd High-Cap Magazine for M4/AR-15 AEGs is styled after a famous polymer magazine, making it well suited to any modern M4/AR-15 AEG build. As with other high-cap mags, the winding wheel is located on the baseplate and the fill window is on the top. 

To load the mag, simply open the hatch on top, pour your BBs in, wind the winding wheel 5-10 times, insert the mag and you're ready to shoot! If you prefer putting down rounds over reloading, a couple of these will give you what you need!

If you need more ammo between reloads, a high-cap magazine will do the trick! The Delta Armory 300rnd High-Cap Magazine for M4/AR-15 AEGs is styled after a famous polymer magazine, making it well suited to any modern M4/AR-15 AEG build. As with other high-cap mags, the winding wheel is located on the baseplate and the fill window is on the top. 

To load the mag, simply open the hatch on top, pour your BBs in, wind the winding wheel 5-10 times, insert the mag and you're ready to shoot! If you prefer putting down rounds over reloading, a couple of these will give you what you need!

If you need more capacity but don't want to carry 10 mags, the Delta Armory 300rnd Steel High-Cap Magazine for M4/AR-15 AEGs will keep you sweet! This wheel-wound high-capacity magazine holds 300 BBs and replicates the real steel NATO STANAG 30rnd mag with its stamped steel shell. Compatibility-wise, this mag should fit in the vast majority of M4/AR-15, SCAR-L and L85/SA80 AEGs. 

Like other Airsoft high-caps, this magazine is loaded through the fill window on the top of the magazine body. First, pull open the hatch, then pour your BBs in. With this done, wind the winding wheel on the baseplate to tension the mag and you're ready to rock. If you need more capacity but don't want to compromise agility with a rig full of magazines, the Delta Armory 300rnd Steel High-Cap Magazine for M4/AR-15 AEGs is what you need!

If you are running the Double Eagle DEK762 and you want mags that match the original, you just found them! The Double Eagle 130rnd 7.62x39 Style Mid-Cap Magazine for M4/AR-15 AEG is styled after real steel 7.62x39mm AR magazines, making it a perfect fit for the DEK762 but also compatible with most M4/AR-15 AEGs.

The magazine is constructed with a steel shell, polymer internals and a steel feed spring, showcasing mock reinforcement ribs stamped into each side. This mag is also quite short for a 130-round mag, allowing you to get closer to the ground when shooting from the prone position and make better use of surrounding cover. As with other Airsoft mid-caps, the 7.62x39 style magazine is loaded through the fill/feed port at the top of the magazine body using a speed loader or loading tool. Whether you own the DEK762 or you want to add an unconventional look to your M4/AR-15 AEG, this mag is perfect for the job!

For those of you looking for a mid-cap magazine with a modern and realistic style with calibre engravings, this is the mag for you!

Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.

The mag features a checked ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout.

For those of you looking for a mid-cap magazine with a modern and realistic style with calibre engravings, this is the mag for you!

Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.

The mag features a checked ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout.

Looking for an interesting mag for your M4? The Battleaxe 450rnd Polymer Magazine for M4/AR-15 AEGs is designed for the M4/AR15 AEG but should work in most compatible platforms, and is based on the extended 40rnd style magazine which gives your primary a more beastly, aggressive look. The magazine is a wheel-wound high-cap design with its winding wheel located on the baseplate and it is filled via the fill window at the top of the magazine body. 

Either side of the magazine has a modern hex-style texture to provide extra grip when pulling the magazine from a pouch or reloading. It also has 5.56x45mm markings recessed into the design to add a realistic look. This mag would pair well with any M4/AR15 AEG loadout with a cutting-edge, modern look! 

An Airsoft Medium Capacity Magazine that is ideal for the Airsofter wanting to inject a little more realism into their Skirmishing style. Loosely inspired by the design of modern P-Mag type magazines, this is G&Gs attempt at creating a lightweight and uniquely styled magazine for STANAG Magazine compatible Airsoft Guns, such as the M4 and M16.

EMG have teamed up with Lancer Systems to bring you a fully trademarked and licensed .300 blackout style magazine to give your Airsoft M4 some serious style points. The mag features an ultra modern aesthetic with the following trademarks:

• '.300 BLACKOUT'
• 'L5-AWA'
• 30BLK
• LANCER SYSTEMS
• 20 / 30

The mag is a mid cap that holds 190 rounds, which is a very large capacity for a mag of this type and features no 'battle rattle unlike high-cap magazines. The mag is constructed from translucent polymer, revealing the mock cartridges within for additional realism. Gripping the mag is no issue thanks to the raised stippled texture and grid pattern to make reloading as quick and easy as possible.

If you are loading up on magazines for your M4/AR15 AEG then you will want to check out the Q-Mag from NUPROL. This attractive-looking polymer magazine holds 150 BBs and can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod/tool. This magazine is designed with a crackle texture on the exterior which is useful for drawing the magazine from pouches, but also allows the mag to be used as an improvised grip to help you get the best shooting position when things get tight. This magazine is compatible with most Airsoft M4/AR15 AEGs, and is a spring loaded mid-cap, which means no battle rattle to give you away!

If you are looking for mags for your Double Eagle EMG Noveske N4 MWS you have found them! These magazines are designed for the Double Eagle Noveske N4 MWS GBBR and unfortunately don't fit the Tokyo Marui M4A1 MWS ZET System GBBR. Thought we would get the bad news over with early!

The mag is constructed with a high-density polymer shell and alloy internals and can be loaded through the feed lips at the top of the mag body with a speed loader, preferably one with a GBB adapter. The gas fill valve is on the rear of the magazine, just below the knocker valve, and the mag is compatible with both green gas and red gas.

The design of the externals is down to Double Eagle themselves, who have added an over-insertion stop at the front of the magazine to prevent the feed lips from being damaged after a reload under pressure. On each side of the body, there is also anti-slip dot texture to prevent the magazine from being dropped and the front of the mag also features finger grooves so it can be used as a makeshift grip when shooting from unconventional positions.

If you are looking for mags for your Double Eagle EMG Noveske N4 MWS you have found them! These magazines are designed for the Double Eagle Noveske N4 MWS GBBR and unfortunately don't fit the Tokyo Marui M4A1 MWS ZET System GBBR. Thought we would get the bad news over with early!

The mag is constructed with a high-density polymer shell and alloy internals and can be loaded through the feed lips at the top of the mag body with a speed loader, preferably one with a GBB adapter. The gas fill valve is on the rear of the magazine, just below the knocker valve, and the mag is compatible with both green gas and red gas.

The design of the externals is down to Double Eagle themselves, who have added an over-insertion stop at the front of the magazine to prevent the feed lips from being damaged after a reload under pressure. On each side of the body, there is also anti-slip dot texture to prevent the magazine from being dropped and the front of the mag also features finger grooves so it can be used as a makeshift grip when shooting from unconventional positions.

If you are looking for high-cap mags for your Airsoft M4 but you want reduced weight so you can carry more, we admire your spirit and wish you well in your quest for victory through volume of fire. The NUPROL 380rnd L-Mag will be an asset to you thanks to its ultra-low weight and exceptional capacity. This mag crams an extra 80 rounds in over a standard M4 high-cap, and is lighter as well, thanks to its polymer construction. This magazine can be loaded through the fill window at the top of the magazine and is wound up using the winding wheel on the baseplate.

The external design of this magazine is patterned after the popular real world "L" magazine and includes all the details one would expect to see, such as textured panels on either side of the mag body for extra gripping qualities, and mock witness windows. This magazine is compatible with most M4/AR15 AEG rifles but should also work in SCAR and 416 AEGs.

A Mid-Cap Magazine for M4/M16 Platform Airsoft Guns, which is made with a Steel Outer Shell to make it tough, well weighted and realistic. It has a 'stubby' design as seen in the M16s of the Vietnam War Era, and is a Spring-Loaded design which will feed all the BBs until empty without the need for winding. This is ideal for DMRs or Period Replicas, or for anyone who wants Mid-Cap Magazines that are low profile and won't get snagged on your kit as much as full size ones.

A Mid-Cap Magazine for M4/M16 Platform Airsoft Guns, which is made with a Steel Outer Shell to make it tough, well weighted and realistic. It has a 'stubby' design as seen in the M16s of the Vietnam War Era, and is a Spring-Loaded design which will feed all the BBs until empty without the need for winding. This is ideal for DMRs or Period Replicas, or for anyone who wants Mid-Cap Magazines that are low profile and won't get snagged on your kit as much as full size ones.

For those of you looking for an ultra-modern styled mid cap, this is the one you're after!

Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.

The mag features a check and dot pattern ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout.

If you're getting gassed up for the GBBR season and you're running a CGS or TM ZET system GBBR, fill your rig with these! The CYMA 30rnd Green Gas Magazine for M4/AR-15 CGS & ZET GBBR is compatible with both CYMA CGS and Tokyo Marui ZET system M4/AR-15 GBBRs and is a green gas magazine with the fill valve on the rear of the steel STANAG style body.

The mag can be loaded through the feed lips at the top of the magazine, though this can be challenging with a standard speed loader without a GBBR adapter. As with the original TM and CYMA GBBR magazines, these mags include the bolt stop components which lock the bolt open at the end of a mag, and each mag holds 30 BBs. 

A 30 Round Green Gas Magazine for the UMAREX Heckler & Koch HK416A5 Airsoft Gas Blowback Rifle and also compatible with VFC M4/AR-15 GBBRs. 

If you need the best mags around coupled with the best BBs, here you go! The Elite Lock 'n' Load bundle pairs 2 of the best AR AEG mags around, the PTS EPM 1 250rnd Mid-cap with the best BBs out there, G&G's Competition Grade 0.28g BBs. If you run a high performance M4/AR-15 AEG platform, this bundle was made with you in mind!

A medium capacity spring fed magazine that replicates a real world mag that's incredibly popular with civilian shooters. The magazine has a tough high quality Polymer exterior that feels great in the hand thanks to the unique hex cut out design, and the ridges that run up the length of the front and back of the magazine.

Holding 140rnd , the mag is a mid-cap type, meaning there is no rattle in comparison with hi-cap magazines and is filled using a speed loader at the top. If you need a high quality magazine that meets your demands, want a unique design to finish off that modern-era rifle or simply want to carry more ammunition in the field without annoying rattle sounds - you can count on these magazines.

If you are Milsim-curious and occasionally give skirmishing a go with real-cap magazines, the ARCTURUS 30/130rnd Variable-Capacity Magazine for M4/AR-15 AEG is the perfect mag to fill your rig with. These magazines have adjustable capacity, meaning you can switch between a realistic 30-round capacity and a more skirmish-friendly 130-round capacity. Like a standard mid-cap, these mags are loaded through the fill/feed port at the top of the magazine using an Airsoft speed loader or loading tool.

To switch capacity, simply remove the screw retaining the baseplate, slide the internals of the magazine out through the top and flick the switch on the magazine's internal shell. Being styled after real steel STANAG magazines, these mags are compatible with most M4/AR-15, SCAR-L, 416 and SA80 AEGs and are constructed with an authentic steel shell with reinforcement ribs stamped on each side. If you fancy giving Milsim a try but you aren't ready to commit, these mags are a great place to start!

Introducing a unique and efficient interlocking magazine system. Simply place the mags together at the small circular extrusions at 90 degree angles, twist and boom! Locked in place.

This means you can have multiple mags locked and ready to reload without the need of mag pouches, plus it doesn't have to be just two interlocking mags, it could be more depending on how adventurous you're feeling!

Constructed from high density polymer with a translucent design, this magazine holds 150 BB's and is a mid-cap magazine, meaning no battle rattle! The magazine can be filled through the fill/feed port at the top of the magazine using a standard Airsoft speed loader.

For those of you looking for a mid-cap magazine with a modern and realistic style with calibre engravings, this is the mag for you!

Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.

The mag features a checked ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout. It also features calibre engravings on the right hand side for additional realism and style.

For those of you looking for a mid-cap magazine with a modern and realistic style with calibre engravings, this is the mag for you!

Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.

The mag features a checked ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout. It also features calibre engravings on the right hand side for additional realism and style.

Looking for a real cap magazine for Milsim that can double as a mid-cap for regular Airsoft skirmishes? The DMAG from D-Day is a high-density polymer magazine, styled after the latest "416" style magazine, complete with reinforcement ribs on either side and a redesigned shell shape to prevent the magazine from being over-inserted during a fast reload and damaging your HOP-up unit. This magazine is constructed with a high-density polymer shell and polymer internals with a steel feed spring and can be loaded through the fill/feed port at the top of the magazine.

Looking for a real cap magazine for Milsim that can double as a mid-cap for regular Airsoft skirmishes? The DMAG from D-Day is a high-density polymer magazine, styled after the latest "416" style magazine, complete with reinforcement ribs on either side and a redesigned shell shape to prevent the magazine from being over-inserted during a fast reload and damaging your HOP-up unit. This magazine is constructed with a high-density polymer shell and polymer internals with a steel feed spring and can be loaded through the fill/feed port at the top of the magazine.

If you're looking to load up in one go with a full complement of high quality mid-caps, EMG's Daniel Defense Mid-Cap mags are some of the best out there. These magazines are styled after the real 32rnd DD M4 Magazines, complete with an increased capacity of 230 BBs and a high-vis yellow fill/feed port to mimic the high-vis follower of the real thing, and to ensure you don't insert the mag backwards!

These magazines are designed to be compatible with high-speed builds, so if your AEG demands a high quality magazine to keep up with its appetite, these will do the trick. Just like any other Airsoft mid-cap, loading these mags is done through the fill/feed port on the top of the magazine with an Airsoft speed loader or loading tool. These magazines are designed for the M4/AR-15 AEG platform but have also been designed with universal compatibility in mind, so they should also fit most SCAR-L, 416, L85 and other AEGs with M4 mag compatibility. 

As a bonus, the DD mag design sports a grippy texture on the sides, the front and the rear to assist in wet weather operations and a loop on the baseplate for "mag-podding" or attaching a paracord pull assist. With official licencing, high quality build, massive capacity for a mid-cap and no battle rattle to give you away, these magazines will see you well equipped to face down with high-cap users while nearly doubling the capacity of your usual 130rnd mid-cap!

If you need magazines but you also want to add a more modern look to your M4/AR15 the NUPROL W-Mag would be a great choice. 

This magazine holds 320 BBs and is loaded through the feed window, located on the top of the magazine bod. This magazine is constructed from strong polymer, while still being lightweight, allowing you to carry more mags while speeding round the field.

Being a flash mag, the magazine is reloaded by pulling the bottom winding cord located under the base plate, keeping you in the fight for longer. 

This magazine takes its name from the mock witness windows located on either side of the magazine, through which you can see your BBs and with the dot texture, this mags gives a modern look to any Airsoft M4/AR15 AEG.

A Steel high capacity clockwork magazine for AR-15 / M4 models of Airsoft Electric Gun, that will fit and feed in 95% of M4 based Airsoft guns.

A Polymer constructed Mid-Cap Magazine for AR/M4/M16 platform Airsoft Electric Guns, which holds a total of 130rnds and is a semi-transparent design with dummy rounds inside.

This is an Airsoft GR16 M4/15/16 magazine from G&G. This high capacity mag can hold an impressive 450 rounds to lay down some serious fire on you opponents. The steel construction is both lightweight and tough with a classic STANAG design.

Arcturus brings us a modern variable capacity magazine for your M4/M16 AEG platform. Holding a choice of 30 or 130 rounds and constructed from high density, lightweight polymer. The magazine features mod cons such as textured finish, ridged edges and ridged baseplate.

This is the G&G metal Airsoft medium capacity magazine that is ideal for the Airsofter wanting to experience a little more realism into their Skirmishing style. The mag features full metal construction with a medium 125rnd capacity for STANAG Magazine compatible Airsoft Guns, such as the M4 and M16.

If you're running an upgraded M4/AR-15 AEG-based DMR, this should suit you! The Elite Lock 'n' Load bundle pairs 2 of the best AR AEG mags around, the PTS EPM1-S 170rnd Mid-cap with the best BBs out there, G&G's Competition Grade 0.28g BBs. DMR users who need maximum capacity in a small form paired with high grade BBs for perfect accuracy: this bundle was made with you in mind!

Looking for modern M4/AR15 AEG magazines? You've found what you need in the Battleaxe 150rnd Polymer Magazine! This mag is designed for M4/AR15 AEG platforms. The magazine is constructed from high-density polymer and holds a respectable 150 BBs which are loaded through the fill/feed port on the top of the magazine body. This is a spring-loaded mid-cap, meaning there is no "battle rattle" as you run which will give your position away.

This magazine also boasts a crackle texture on the sides to allow for a firm grip on the magazine during reloads in inclement weather and also allows you to use the mag as a makeshift vertical grip when shooting in cramped CQB environments. At the top of the magazine body, the clear internals are visible through the magazine catch hole on the left side which allows you to confirm whether or not the magazine is fully loaded. Handy for those who run magazines on magazines on magazines, it's easy to get confused!

If you are loading up on magazines for your M4/AR-15 AEG then you will want to check out the H-Mag from NUPROL. This high density polymer magazine holds 150 BBs and can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod/tool.

This magazine is designed with hexagonal texture on the exterior which adds grip and makes them easier to handle while also adding a touch of modern styling, well suited to cutting-edge setups. This magazine is compatible with most Airsoft M4/AR-15 AEGs, and is a spring-loaded mid-cap, which means no battle rattle to give you away!

Looking for some extra firepower for your TM NGRS AEG? The NUPROL 1200rnd Electric drum magazine is the key to gaining the volume of fire advantage when skirmishing, and is the perfect tool to repel an ambush. This drum magazine is constructed from high-density polymer with a modern design aesthetic, and is the first of its kind for the NGRS system! If the "normal" AEG users are getting on your nerves with their high-caps, pull this bad boy out of the kitbag to remind them who is the boss! This magazine is an autowinding design which requires 3x AAA batteries to operate. 

Please note, this drum magazine is NOT compatible with standard M4/AR-15 AEGs and only works with Tokyo Marui NGRS (Next Generation Recoil Shock) AEGs. 

If you need magazines but you also want to add a more realistic look to your M4/AR15 the NUPROL W-Mag would be a great choice. This hi-cap magazine holds 380 BBs and is loaded through its feed window, located on the top of the magazine body. This magazine is constructed from strong polymer, while still being lightweight, so you can carry more mags and still run round the field with ease. This magazine takes its name from the mock witness windows located on either side of the magazine, through which you can see the winding gears.

If you need affordable Mid-cap magazines for your M4/AR-15 AEG you're going to want to check these out! The A&K 140rnd Steel Mid-Cap Magazine is designed to fit M4/AR-15 AEGs. It is loaded just like any other Airsoft mid-cap, through the fill/feed port at the top of the magazine body using a speed loader or loading tool. If you need affordable M4 mags to complete your loadout, this is a great one to consider!

Authentic to the real world STANAG magazine, this has been constructed with heavyweight alloy steel for a more hefty and realistic feel than your average Airsoft magazine. It is of Medium capacity and holds 140 rounds, it features a spring-loaded follower, guaranteeing consistent feeding so your Airsoft replica is unlikely to misfeed.

If you are looking for mid-caps with a bigger-than-average capacity the EMG 210rnd Strike Industries Polymer Magazine for M4/AR-15 AEG fits the bill! These magazines are constructed from seriously solid high density polymer with a steel feed spring and a high-vis orange follower so you can easily see when you are fresh out of ammo.

Being officially licenced by Strike Industries, this magazine is a near 1:1 copy of the real Strike Industries "Strike Mag MK1" and is not shy about its brand pedigree, with subtle licenced trademarks across the design as well as realistic 5.56x45 calibre markings. If you are looking for a more realistic alternative to the PTS EPM magazine, this would be a great choice!

Nuprol are back with a fresh mag design. This magazine holds 380 rounds and is designed for the M4/AR15 AEG but should work in most compatible STANAG platforms and has an ultra-modern look thanks to its ridged and stippled texture pattern. The magazine is a wheel wound high-cap with its winding wheel located on the baseplate and is filled via the fill window at the top of the magazine body.

Either side of the magazine has ridged extrusions  to provide extra grip when pulling the magazine from a pouch and the stippled texture only adds to the grippage. It also has 5.56x45mm markings recessed into the design to add a realistic look. This mag would pair well with any M4/AR15 AEG setup with a cutting edge look!

If you've got an M4 and fancy doing things a little differently try this 110-round pistol magazine. Its longer form makes it perfect for doubling as a foregrip and it leans into the pistol/carbine trend currently in the states. It's slimmer form factor also makes it easy to carry multiple of in your loadout. Constructed from tough but lightweight polymer, be aware that it will require a pistol magazine adapter to fit an M4/AR-15.

A medium capacity 110rnd capacity design with flare bottom to aid in speedy reloads, the mag can be loaded through the fill/feed port at the top of the magazine body using an Airsoft speed loader or loading rod. 

They might look like a standard Airsoft M4 AEG magazine, but they've got a little secret, they launch themselves out of your gun when empty!  A spring powered latch projects the magazine out of your gun when the mag is empty to allow you to reload faster when the seconds really count.

If you're looking for high quality mid-caps with a more realistic look than EPM mags, the EMG 210rnd Troy BattleMag Magazines for M4/AR-15 AEGs; 2 Pack should suit you perfectly! Like EPM mags, these have a whopping capacity of 210 BBs, many more than other standard-length mid-caps but unlike EPMs, these mags are patterned after the real steel Troy BattleMag magazine and officially licenced by Troy through EMG. Perfect for the realism fans!

Just like the real BattleMag, the flanks of the mag body boast snake scale style texture for enhanced traction and a rubber magazine pull assist on the bottom for improved control during fast reloads. The pull assist is also useful for pulling the mags out of tight pouches, giving you a bit extra to hold into to speed up your reloads. 

Loading the BattleMag is the same process as other Airsoft mid-caps; through the fill/feed port on the top of the magazine body using an Airsoft speed loader or loading tool. The massive capacity may make this mag difficult to load using ODIN or similar loaders when the mags are new, so we recommend bedding the magazine in before using a crank wound loader by filling it up with a thumb plunger loader and emptying it a few times. If you want your magazines to be as realistic as your primary, the EMG Troy BattleMag 2 pack is what you need!

If you are looking for magazines, BBs and a Speedloader for your M4/AR-15 platform AEG why not get them all in one? The Lock 'n Load Bundle combines a 1KG bulk bag of our favourite BB weight for outdoors skirmishing, 0.28G from Evolution Airsoft, 2 x NUPROL Adjustable capacity M4/AR-15 AEG magazines and a Big Dragon 100rnd Speedloader. 

NUPROL's magazine should work in the vast majority of M4/AR-15 platform AEGs and gives you the choice of running them as real cap 30rnd mags or 140rnd mid-caps for when realism comes second to firepower. Whether you attend Milsim events or just regular walk-on skirmishes, this pack should see you well-equipped for battle!

This magazine is styled after the real 32rnd DD M4 Magazines, complete with an increased capacity of 230 BBs and a high-vis yellow fill/feed port to mimic the high-vis follower of the real thing, and to ensure you don't insert the mag backwards!

This magazine is designed to be compatible with high-speed builds, so if your AEG demands a high-quality magazine to keep up with its appetite, this will do the trick. Just like any other Airsoft mid-cap, loading this mag is done through the fill/feed port on the top of the magazine with an Airsoft speed loader or loading tool. This magazine is designed for an M4/AR-15 AEG platform but has also been designed with universal compatibility in mind, so they should also fit most SCAR-L, 416, L85 and other AEGs with M4 mag compatibility. 

As a bonus, the DD mag design sports a grippy texture on the sides, the front and the rear to assist in wet weather operations and a loop on the baseplate for "mag-podding" or attaching a paracord pull assist. With official licencing, high-quality build, massive capacity for a mid-cap and no battle rattle to give you away, these magazines will see you well equipped to face down with high-cap users while nearly doubling the capacity of your usual 130rnd mid-cap

This Magazine is designed for M4 / M16 / AR platform Airsoft Electric Guns, and holds a total of 130rnds. Being a Mid-Cap Magazine it will feed until empty and doesn't have the rattle of High Capacity Magazines, but needs a Speedloader to be filled. It has textured externals to improve grip, as well as faux capacity counters for extra realism.

If you are looking for magazines for your Double Eagle or Tokyo Marui MWS GBBR; you have found them! These magazines are designed for the Double Eagle Noveske N4 MWS GBBR, but should work with original Tokyo Marui M4 MWS System GBBRs too - unlike other Double Eagle gas magazines.

The mag is constructed with a durable alloy shell and internals. It is loaded through the feed lips at the top of the mag body with a speed loader, preferably one with a GBB adapter. The gas fill valve is at the bottom of the magazine, on the baseplate, and the mag is compatible with both green gas and red gas.

It holds 35 BBs, making it perfect for those who seek realism. As with the original TM and Double Eagle GBBR magazines, these mags include the bolt stop components which lock the bolt open at the end of a mag, further adding to the realism of the Double Eagle Noveske N4 MWS ZET System GBBR!