Airsoft Rifle Magazines

For those of you looking for a mid-cap magazine, but still want to hold a substantial amount of BBs to reduce reloads this magazine is what you're looking for.

Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.

The mag features a check and dot pattern ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout.

Looking for an interesting mag for your M4? The NUPROL 450rnd H-Mag High-Cap is designed for the M4/AR15 AEG but should work in most compatible platforms, and is an extended 40rnd style magazine which gives your primary a more beastly, aggressive look. The magazine is a wheel wound high-cap with its winding wheel located on the baseplate and is filled via the fill window at the top of the magazine body. 

Either side of the magazine has a modern hex style texture to provide extra grip when pulling the magazine from a pouch and also has 5.56x45mm markings recessed into the design to add a realistic look. This mag would pair well with any M4/AR15 AEG setup with a cutting edge look! 

Looking for an interesting mag for your M4? The NUPROL 450rnd H-Mag High-Cap is designed for the M4/AR15 AEG but should work in most compatible platforms, and is an extended 40rnd style magazine which gives your primary a more beastly, aggressive look. The magazine is a wheel wound high-cap with its winding wheel located on the baseplate and is filled via the fill window at the top of the magazine body. 

Either side of the magazine has a modern hex style texture to provide extra grip when pulling the magazine from a pouch and also has 5.56x45mm markings recessed into the design to add a realistic look. This mag would pair well with any M4/AR15 AEG setup with a cutting edge look! 

If you are looking for mags for your Double Eagle EMG Noveske N4 MWS you have found them! These magazines are designed for the Double Eagle Noveske N4 MWS GBBR and unfortunately don't fit the Tokyo Marui M4A1 MWS ZET System GBBR. Thought we would get the bad news over with early!

The mag is constructed with a high-density polymer shell and alloy internals and can be loaded through the feed lips at the top of the mag body with a speed loader, preferably one with a GBB adapter. The gas fill valve is on the rear of the magazine, just below the knocker valve, and the mag is compatible with both green gas and red gas.

The design of the externals is down to Double Eagle themselves, who have added an over-insertion stop at the front of the magazine to prevent the feed lips from being damaged after a reload under pressure. On each side of the body, there is also anti-slip dot texture to prevent the magazine from being dropped and the front of the mag also features finger grooves so it can be used as a makeshift grip when shooting from unconventional positions.

If you are looking for mags for your Double Eagle EMG Noveske N4 MWS you have found them! These magazines are designed for the Double Eagle Noveske N4 MWS GBBR and unfortunately don't fit the Tokyo Marui M4A1 MWS ZET System GBBR. Thought we would get the bad news over with early!

The mag is constructed with a high-density polymer shell and alloy internals and can be loaded through the feed lips at the top of the mag body with a speed loader, preferably one with a GBB adapter. The gas fill valve is on the rear of the magazine, just below the knocker valve, and the mag is compatible with both green gas and red gas.

The design of the externals is down to Double Eagle themselves, who have added an over-insertion stop at the front of the magazine to prevent the feed lips from being damaged after a reload under pressure. On each side of the body, there is also anti-slip dot texture to prevent the magazine from being dropped and the front of the mag also features finger grooves so it can be used as a makeshift grip when shooting from unconventional positions.

If you're looking to load up in one go with a full complement of high quality mid-caps, EMG's Daniel Defense Mid-Cap mags are some of the best out there. These magazines are styled after the real 32rnd DD M4 Magazines, complete with an increased capacity of 230 BBs and a high-vis yellow fill/feed port to mimic the high-vis follower of the real thing, and to ensure you don't insert the mag backwards!

These magazines are designed to be compatible with high-speed builds, so if your AEG demands a high quality magazine to keep up with its appetite, these will do the trick. Just like any other Airsoft mid-cap, loading these mags is done through the fill/feed port on the top of the magazine with an Airsoft speed loader or loading tool. These magazines are designed for the M4/AR-15 AEG platform but have also been designed with universal compatibility in mind, so they should also fit most SCAR-L, 416, L85 and other AEGs with M4 mag compatibility. 

As a bonus, the DD mag design sports a grippy texture on the sides, the front and the rear to assist in wet weather operations and a loop on the baseplate for "mag-podding" or attaching a paracord pull assist. With official licencing, high quality build, massive capacity for a mid-cap and no battle rattle to give you away, these magazines will see you well equipped to face down with high-cap users while nearly doubling the capacity of your usual 130rnd mid-cap!

For those of you looking for a mid-cap magazine with a modern and realistic style with calibre engravings, this is the mag for you!

Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.

The mag features a checked ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout.

For those of you looking for a mid-cap magazine with a modern and realistic style with calibre engravings, this is the mag for you!

Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.

The mag features a checked ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout.

If you're getting gassed up for the GBBR season and you're running a CGS or TM ZET system GBBR, fill your rig with these! The CYMA 30rnd Green Gas Magazine for M4/AR-15 CGS & ZET GBBR is compatible with both CYMA CGS and Tokyo Marui ZET system M4/AR-15 GBBRs and is a green gas magazine with the fill valve on the rear of the steel STANAG style body.

The mag can be loaded through the feed lips at the top of the magazine, though this can be challenging with a standard speed loader without a GBBR adapter. As with the original TM and CYMA GBBR magazines, these mags include the bolt stop components which lock the bolt open at the end of a mag, and each mag holds 30 BBs. 

For those of you looking for a mid-cap magazine, but still want to hold a substantial amount of BBs to reduce reloads this magazine is what you're looking for.

Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.

The mag features a checked ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout.

For those of you looking for a mid-cap magazine, but still want to hold a substantial amount of BBs to reduce reloads this magazine is what you're looking for.

Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.

The mag features a checked ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout.

EMG have teamed up with Lancer Systems to bring you a fully trademarked and licensed .300 blackout style magazine to give your Airsoft M4 some serious style points. The mag features an ultra modern aesthetic with the following trademarks:

• '.300 BLACKOUT'
• 'L5-AWA'
• 30BLK
• LANCER SYSTEMS
• 20 / 30

The mag is a mid cap that holds 190 rounds, which is a very large capacity for a mag of this type and features no 'battle rattle unlike high-cap magazines. The mag is constructed from translucent polymer, revealing the mock cartridges within for additional realism. Gripping the mag is no issue thanks to the raised stippled texture and grid pattern to make reloading as quick and easy as possible.

EMG have teamed up with Lancer Systems to bring you a fully trademarked and licensed .300 blackout style magazine to give your Airsoft M4 some serious style points. The mag features an ultra modern aesthetic with the following trademarks:

• '.300 BLACKOUT'
• 'L5-AWA'
• 30BLK
• LANCER SYSTEMS
• 20 / 30

The mag is a mid cap that holds 190 rounds, which is a very large capacity for a mag of this type and features no 'battle rattle unlike high-cap magazines. The mag is constructed from translucent polymer, revealing the mock cartridges within for additional realism. Gripping the mag is no issue thanks to the raised stippled texture and grid pattern to make reloading as quick and easy as possible.

An Airsoft Medium Capacity Magazine that is ideal for the Airsofter wanting to inject a little more realism into their Skirmishing style. Loosely inspired by the design of modern P-Mag type magazines, this is G&Gs attempt at creating a lightweight and uniquely styled magazine for STANAG Magazine compatible Airsoft Guns, such as the M4 and M16.

If you are running the Double Eagle DEK762 and you want mags that match the original, you just found them! The Double Eagle 130rnd 7.62x39 Style Mid-Cap Magazine for M4/AR-15 AEG is styled after real steel 7.62x39mm AR magazines, making it a perfect fit for the DEK762 but also compatible with most M4/AR-15 AEGs.

The magazine is constructed with a steel shell, polymer internals and a steel feed spring, showcasing mock reinforcement ribs stamped into each side. This mag is also quite short for a 130-round mag, allowing you to get closer to the ground when shooting from the prone position and make better use of surrounding cover. As with other Airsoft mid-caps, the 7.62x39 style magazine is loaded through the fill/feed port at the top of the magazine body using a speed loader or loading tool. Whether you own the DEK762 or you want to add an unconventional look to your M4/AR-15 AEG, this mag is perfect for the job!

If you are looking for mid-caps with a bigger-than-average capacity the EMG 210rnd Strike Industries Polymer Magazine for M4/AR-15 AEG fits the bill! These magazines are constructed from seriously solid high density polymer with a steel feed spring and a high-vis orange follower so you can easily see when you are fresh out of ammo.

Being officially licenced by Strike Industries, this magazine is a near 1:1 copy of the real Strike Industries "Strike Mag MK1" and is not shy about its brand pedigree, with subtle licenced trademarks across the design as well as realistic 5.56x45 calibre markings. If you are looking for a more realistic alternative to the PTS EPM magazine, this would be a great choice!

For those of you looking for an ultra-modern styled mid cap, this is the one you're after!

Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.

The mag features a check and dot pattern ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout.

For those of you looking for an ultra-modern styled mid cap, this is the one you're after!

Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.

The mag features a check and dot pattern ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout.

If you are looking for high-cap mags for your Airsoft M4 but you want reduced weight so you can carry more, we admire your spirit and wish you well in your quest for victory through volume of fire. The NUPROL 380rnd L-Mag will be an asset to you thanks to its ultra-low weight and exceptional capacity. This mag crams an extra 80 rounds in over a standard M4 high-cap, and is lighter as well, thanks to its polymer construction. This magazine can be loaded through the fill window at the top of the magazine and is wound up using the winding wheel on the baseplate.

The external design of this magazine is patterned after the popular real world "L" magazine and includes all the details one would expect to see, such as textured panels on either side of the mag body for extra gripping qualities, and mock witness windows. This magazine is compatible with most M4/AR15 AEG rifles but should also work in SCAR and 416 AEGs.

If you are looking for high-cap mags for your Airsoft M4 but you want reduced weight so you can carry more, we admire your spirit and wish you well in your quest for victory through volume of fire. The NUPROL 380rnd L-Mag will be an asset to you thanks to its ultra-low weight and exceptional capacity. This mag crams an extra 80 rounds in over a standard M4 high-cap, and is lighter as well, thanks to its polymer construction. This magazine can be loaded through the fill window at the top of the magazine and is wound up using the winding wheel on the baseplate.

The external design of this magazine is patterned after the popular real world "L" magazine and includes all the details one would expect to see, such as textured panels on either side of the mag body for extra gripping qualities, and mock witness windows. This magazine is compatible with most M4/AR15 AEG rifles but should also work in SCAR and 416 AEGs.

If you are looking for high-cap mags for your Airsoft M4 but you want reduced weight so you can carry more, we admire your spirit and wish you well in your quest for victory through volume of fire. The NUPROL 380rnd L-Mag will be an asset to you thanks to its ultra-low weight and exceptional capacity. This mag crams an extra 80 rounds in over a standard M4 high-cap, and is lighter as well, thanks to its polymer construction. This magazine can be loaded through the fill window at the top of the magazine and is wound up using the winding wheel on the baseplate.

The external design of this magazine is patterned after the popular real world "L" magazine and includes all the details one would expect to see, such as textured panels on either side of the mag body for extra gripping qualities, and mock witness windows. This magazine is compatible with most M4/AR15 AEG rifles but should also work in SCAR and 416 AEGs.

A Polymer constructed Mid-Cap Magazine for AR/M4/M16 platform Airsoft Electric Guns, which holds a total of 130rnds and is a semi-transparent design with dummy rounds inside.

For those of you looking for a mid-cap magazine with a modern and realistic style with calibre engravings, this is the mag for you!

Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.

The mag features a checked ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout. It also features calibre engravings on the right hand side for additional realism and style.

For those of you looking for a mid-cap magazine with a modern and realistic style with calibre engravings, this is the mag for you!

Able to fit the vast majority of M4/ARs or other STANAG such as the SCAR-L compatible AEGs, the mag is filled from the top using a speed loader and being a mid-cap magazine, it has none of the 'battle rattle' that high-cap magazines would.

The mag features a checked ribbed texture to aid in grippage and reloads, constructed from tough, but lightweight polymer and makes for a worthy contemporary style addition to any STANAG based loadout. It also features calibre engravings on the right hand side for additional realism and style.

This is the G&G metal Airsoft medium capacity magazine that is ideal for the Airsofter wanting to experience a little more realism into their Skirmishing style. The mag features full metal construction with a medium 125rnd capacity for STANAG Magazine compatible Airsoft Guns, such as the M4 and M16.

Introducing a unique and efficient interlocking magazine system. Simply place the mags together at the small circular extrusions at 90 degree angles, twist and boom! Locked in place.

This means you can have multiple mags locked and ready to reload without the need of mag pouches, plus it doesn't have to be just two interlocking mags, it could be more depending on how adventurous you're feeling!

Constructed from high density polymer with a translucent design, this magazine holds 150 BB's and is a mid-cap magazine, meaning no battle rattle! The magazine can be filled through the fill/feed port at the top of the magazine using a standard Airsoft speed loader.

Those of you who own a Tokyo Marui NGRS M4/AR15 and need some extra mags to stay on the field, you've come to the right place. With a 70 round capacity, this mag is a mid-cap mag meaning there is no rattle when you're running from objective to objective.

BBs are fed with a steel spring inside and the extended rod means that no BBs will escape during loading / reloading. This mag has the mechanism to activate the bolt catch of the TM NGRS variants, so if you like realism this is the mag for you.

Those of you who own a Tokyo Marui NGRS M4/AR15 and need some extra mags to stay on the field, you've come to the right place. With a 70 round capacity, this mag is a mid-cap mag meaning there is no rattle when you're running from objective to objective.

BBs are fed with a steel spring inside and the extended rod means that no BBs will escape during loading / reloading. This mag has the mechanism to activate the bolt catch of the TM NGRS variants, so if you like realism this is the mag for you.

If you are loading up on magazines for your M4/AR15 AEG then you will want to check out the Q-Mag from NUPROL. This attractive-looking polymer magazine holds 150 BBs and can be loaded through the fill/feed port at the top of the magazine body using a speed loader or loading rod/tool. This magazine is designed with a crackle texture on the exterior which is useful for drawing the magazine from pouches, but also allows the mag to be used as an improvised grip to help you get the best shooting position when things get tight. This magazine is compatible with most Airsoft M4/AR15 AEGs, and is a spring loaded mid-cap, which means no battle rattle to give you away!

If you need magazines but you also want to add a more modern look to your M4/AR15 the NUPROL W-Mag would be a great choice. 

This magazine holds 320 BBs and is loaded through the feed window, located on the top of the magazine bod. This magazine is constructed from strong polymer, while still being lightweight, allowing you to carry more mags while speeding round the field.

Being a flash mag, the magazine is reloaded by pulling the bottom winding cord located under the base plate, keeping you in the fight for longer. 

This magazine takes its name from the mock witness windows located on either side of the magazine, through which you can see your BBs and with the dot texture, this mags gives a modern look to any Airsoft M4/AR15 AEG.