Airsoft Mounts

If you want to equip your Cybergun CANIK TP9 GBB with a red dot optic for faster target acquisition and a slick modern look, the Cybergun CANIK Optic Plate & Charging Handle Set; Docter/RMR Footprint is designed for just that! This set includes two optics plates, one with an RMR footprint and one with a Doctor footprint, giving you access to the two most common red dot sight footprints.

Also included is a charging handle which can be attached to either side of the optic plate via its threaded base, granting functionality for both left and right-handed shooters and lightening fast handling IPSC race gun style! This is ideal for those who run their pistol as a primary in CQB skirmishes but can be left off entirely if you want a more snag-free setup well suited to a combat sidearm. If you want to dress your CANIK up like all the Glock and Hi-capa users can, here is your opportunity!

If you want to equip your Cybergun CANIK TP9 GBB with a red dot optic for faster target acquisition and a slick modern look, the Cybergun CANIK Optic Plate & Charging Handle Set; Docter/RMR Footprint is designed for just that! This set includes two optics plates, one with an RMR footprint and one with a Doctor footprint, giving you access to the two most common red dot sight footprints.

Also included is a charging handle which can be attached to either side of the optic plate via its threaded base, granting functionality for both left and right-handed shooters and lightening fast handling IPSC race gun style! This is ideal for those who run their pistol as a primary in CQB skirmishes but can be left off entirely if you want a more snag-free setup well suited to a combat sidearm. If you want to dress your CANIK up like all the Glock and Hi-capa users can, here is your opportunity!

A combination scope and side rail 20mm RIS rail mount designed to fit on both Airsoft Electric and Gas type AK Platform weapons which feature a side mount plate. 

If you are rocking a KAR98k but you want some modern glass, this is a great way to get the job done! The 20mm Picatinny rail mount from Double Bell is designed to fit to their KAR98K sniper rifle and provide a 20mm rail above the receiver, allowing you to mount modern optical sights. The rail mounts into the rear sight mounting apparatus and provides you with 17 slots of 20mm rail, plenty to mount whatever you like. We advise against adding a PEQ, flashlight and T1 but it's your gun and there is enough space, just be ready to run if a reenactor spots you!

If you want to snipe with your KAR98K this should help you get there! The Double Bell Scope Mount For KAR98K is designed specifically for the Double Bell KAR98K and mounts to the receiver rail on the left side of the rifle, just below the rear iron sight. The mount is intended for scopes with a 20mm monotube and is constructed from alloy with steel screws and a steel release lever.

When choosing a scope for this mount we recommend looking for a scope with an objective lens of less than 30mm in diameter, a 20mm monotube and long eye relief due to the "Scout" style mount location positioned closer to the front of the rifle than the average scope mount.

If you are lucky enough to own one of the scarce Airsoft Lee Enfield Rifles out there, your options just broadened! Introducing the Lee Enfield Steel Scope Mount from Vector Optics, a robustly constructed scope mount designed for the real thing, capable of housing any 1-inch/25mm tube scope to give your Lee Enfield the No.4 MK1 (T) sniper rifle look!

If you're running a red dot with magnifier setup and want a more comfortable neck position, the PTS Syndicate Unity Tactical FAST™ FTC OMNI Magnifier Mount will sort that out! This mount is designed for a wide range of magnifiers and clones, including those from EOTech, Vortex, Holosun, Sig Sauer and Trijicon (for detailed compatibility see the "Full Description").

Constructed from flawlessly machined CNC aluminium with a steel mounting bolt, this mount is unique in its FTC (Flip to Centre) configuration. This means when stowed, your magnifier won't hang off the side of your primary; instead, it pushes straight down to stow just below your primary optic, keeping the sides of your primary clean for reduced snag potential.

The Unity Tactical FAST™ FTC OMNI Magnifier Mount is set to position your magnifier at 2.26" from the rail to the centre of the optic (aka optical centreline), meaning you will in most cases require an equivalent height riser to align your red dot with your magnifier. Thankfully, PTS offers the FAST Riser, FAST MRO Mount and FAST Micro Mount to facilitate this.

Being higher over the rail than standard magnifier mounts makes this setup ideal for full-face mask users or those who run active hearing protection, avoiding the need for straining your neck to see down your sighting system. If you want the elite, modern look for your primary and plenty of perks to go with it, the PTS Syndicate Unity Tactical FAST™ FTC OMNI Magnifier Mount belongs on your gat!

If you're running a red dot with magnifier setup and want a more comfortable neck position, the PTS Syndicate Unity Tactical FAST™ FTC OMNI Magnifier Mount will sort that out! This mount is designed for a wide range of magnifiers and clones, including those from EOTech, Vortex, Holosun, Sig Sauer and Trijicon (for detailed compatibility see the "Full Description").

Constructed from flawlessly machined CNC aluminium with a steel mounting bolt, this mount is unique in its FTC (Flip to Centre) configuration. This means when stowed, your magnifier won't hang off the side of your primary; instead, it pushes straight down to stow just below your primary optic, keeping the sides of your primary clean for reduced snag potential.

The Unity Tactical FAST™ FTC OMNI Magnifier Mount is set to position your magnifier at 2.26" from the rail to the centre of the optic (aka optical centreline), meaning you will in most cases require an equivalent height riser to align your red dot with your magnifier. Thankfully, PTS offers the FAST Riser, FAST MRO Mount and FAST Micro Mount to facilitate this.

Being higher over the rail than standard magnifier mounts makes this setup ideal for full-face mask users or those who run active hearing protection, avoiding the need for straining your neck to see down your sighting system. If you want the elite, modern look for your primary and plenty of perks to go with it, the PTS Syndicate Unity Tactical FAST™ FTC OMNI Magnifier Mount belongs on your gat!

This Sight Mount from Vortex Optics is crafted from Aluminium and features a One-Piece design, with the exception of the top of the Mount Rings. It is designed for 30mm Optic Tubes and has a Center Height of 40.39mm / 1.59". The Cantilever design of the Mount makes it especially effective for installing Short Dot-style Optics to a flat-top Receiver such as the AR-15. Being made from Aluminium, it is lightweight and effective, but has been so well made it is covered by Vortex's VIP Lifetime Warranty.

A 20mm RIS compatible raised scope mount ring, designed to raise up optics to your eye-level, or fit larger scopes onto your Airsoft guns.

If you have seen Saving Private Ryan and now you want a scoped Springfield rifle, this should get you there! The S&T 20mm Rifle Scope Mount for M1903A3 Springfield is constructed from aluminium and accepts common 20mm Picatinny scope rings, allowing you to fit whatever scope you desire to your Springfield provided the rings can be spaced to fit the mount. The spacing between the two rail sections is 7.5cm approximately, meaning most telescopic sights with separate rings will fit right on with the rings in the right position. 

The mount replaces your rear iron sight and sits over the receiver when installed and requires additional screws (not included) to attach it to the rifle. Please note, this mount will not work with optics which have built-in 20mm rail mounts and is intended for use with optics which use separate scope rings. 

If you're running an SSG10 A3 and want it shooting even better than it already does, the Novritsch SSG10 A3 TDC HOP-up Rail Mount will get you there. This part is a unique design from Novritsch, specifically for the A3 variant of the SSG10 and is not compatible with other variants. 

The set includes a 20mm Picatinny rail mount with a TDC HOP-up dial built in and is supplied with the parts you'll need to install it, other than a drill. Be warned, this set requires precision to install and if done wrong, can be catastrophic. As such, we only recommend this to Airsofters experienced with tech work and handy with an electric drill. 

The advantages of TDC HOP-ups are numerous, including providing a stronger HOP-up effect and reducing side-to-side shot deviation. The numerically marked TDC dial also allows you to keep track of your HOP-up settings for different BB weights, a fantastic feature for the serious sniper. The integral 20mm Picatinny rail also allows PEQ lasers, RunCam or Novritsch ClipCam Cheater-Catcher action cameras to be installed in the optimal position. If you want to up the performance of your SSG10 A3 to the maximum, the Novritsch SSG10 A3 TDC HOP-up Rail Mount is what you need!

If you're stuggling to get a good view through your red dot sight when wearing face protection, the WADSN High 20mm Picatinny Mount for T1/T2 Red Dot & PEQ Box will solve that issue! This raised optic mount is patterned after real steel "Hydra" mounts, offering a raised mount for T1/T2 style red dot sights and a 20mm Picatinny rail for a PEQ/DBAL laser unit or scope camera. This mount is designed for 20mm Picatinny rails and includes a pair of "recoil lugs" on the bottom which hold it in place firmly on your rail. 

The High 20mm Picatinny Mount for T1/T2 Red Dot & PEQ Box should fit most T1 and T2 clones provided they correctly replicate the real Aimpoint Micro mounting standard and is also compatible with the Novritsch Red Dot Sight V3, Vector Optics Maverick, Vortex Sparc Solar and Holosun 403B. Being slightly higher than a standard T1 mount, the High 20mm Picatinny Mount for T1/T2 Red Dot & PEQ Box is ideal for those who have a hard time getting a clear sight picture using full face protection, being designed in the real world for use with respirators and night vision devices. 

A Scope Mount designed for Airsoft Sights and Scopes which offsets Sights and Scopes allowing their Eye relief to be adjusted even with minimal rail space. 

A special mounting ring with three 20mm short rails on top and sides. Allowing additional accessories like lasers or lights to be attached.

If you have plans to build out a Krytac Maxim 9 as a primary pistol you will want this! The Krytac SilencerCo Maxim 9 GBB Pistol 20mm Picatinny Rail Kit provides a single 20mm rail which can be mounted to the KeyMod slots on the bottom of the Maxim 9 suppressor, and is the perfect length to look just right.

20mm Picatinny rails allow you to mount a laser aiming module or a tactical flashlight to your silent killer and assist your efforts in cleaning up the CQB site. For those who see the potential in the Maxim 9 to be the ultimate CQB tool, this rail kit will be an asset! 

A Scope Ring for compatible Riflescopes, which will help you mount your Riflescope to perfection, eliminating potential error caused by mounting your Sight by hand. If you're a stickler for precision, then there's no excuse to not be using these rings on your rifle.

A Scope Ring for compatible Riflescopes, which will help you mount your Riflescope to perfection, eliminating potential error caused by mounting your Sight by hand. If you're a stickler for precision, then there's no excuse to not be using these rings on your rifle.

If you've scratched up your CM.039's rail and you need a replacement, this is exactly what you need! The CYMA 20mm Picatinny Optics Mount for CM.039 AK AEG is a replacement original part for the CYMA CM.039 and CM.039C AEGs but unfortunately won't fit other AKs. The set includes the mounting bolts and the rail itself. 

If you're rocking a Unity Fusion mount, the WADSN Offset Rail for Fusion Mounts should interest you! This CNC aluminium mount is compatible with Unity-style Fusion mounts and provides an offset 20mm Picatinny rail with 5 rail slots, ideal for flashlights and laser aiming modules. This rail mount is only compatible with Fusion style mounts and includes two steel bolts to mount it and the correct Allen key so you don't need to rummage in your toolbox!

If you want to take full advantage of the incredible long-range performance of your Novritsch SSX23, the Novritsch 20mm Picatinny Slide Rail for SSX23 NBB will help! This aluminium 20mm Picatinny rail mount fits directly to the SSX23 slide, packaged with the correct screws to get it mounted straight away. This means you can fit a compact red dot sight to your SSX23, increasing long-range accuracy and target acquisition speed by removing the need to properly align the fibre optic sights. 

While you might not use them often with your red dot sight mounted, the fibre optic sights of the SSX23 are not obstructed when the rail is installed, meaning if your red dot battery runs out mid-firefight you can still land hits with ease!

The perfect way to securely mount your scope onto your Airsoft gun, allowing you to get the best possible accuracy from your scope when aiming. 

A set of high profile mount rings for scopes up to 30mm wide, which attaches to a 20mm rail and provides a solid platform for you to use your optic.

If you're building out your AK to match the latest real steel builds, the 5KU 20mm Picatinny Rail Mount for Zco AK handguard is essential. Based on real steel Zco-style red dot risers, this aluminium component fits replica Zco-style handguards such as the 5KU Lightweight Zco-style Lower Handguard. It will only attach to these styles of handguards due to the unique attachment interface.

Atop the riser is a section of 20mm Picatinny rail, perfect for mounting a red dot that matches the modern Russian design. If your modern Zco-style AK requires optic space for longer-range engagements, the 5KU 20mm Picatinny Rail Mount for Zco AK handguard is the piece of equipment for you.

If you need to mount an optic on your VZ.58, this is essential! The Ares Side Rail Mount for VZ.58 AEG is compatible with the Ares and Delta Armory VZ.58 AEGs and allows a VZ.58 scope mount to be fitted. The set includes the side rail itself and the mounting bolts. Please note, this side rail is only compatible with Ares VZ.58 scope mounts and is NOT compatible with AK or SVD mounts. 

If you're looking for a replacement magnifier mount you're in luck! The Novritsch Flip Up Magnifier Mount fits magnifiers with a tube diameter of 30mm. when flipped up, it sits roughly 6cm above the rail, perfect for skirmishers with or without face masks. It is constructed from lightweight and durable aluminium, making it perfect for players who like to stay light on their feet but remain a threat at range.

To flip this sight, simply push on it and it will lock upright or to the side, this makes it fast and easy to adjust between long and close-range engagements. If you have a magnifier but are missing the mount, the Novritsch Flip Up Magnifier Mount - 30mm is for you!

The KAR98k Steel Scope Rail Mount from Vector Optics mounts to your KAR98k receiver (following modification - see Special Instructions) and provides two slots of Picatinny rail, ideally suited to mounting a rifle scope with separate mount rings. This mount is intended for use on real rifles, but does match the geometry of the Airsoft receivers should you choose to add it to your Airsoft build.

If you need a bit more height on your optic for a clear view with full face protection, the Delta Armory 3-Slot 20mm Picatinny Riser Mount for Red Dot Sights will do the trick. This riser mount provides a 3-slot 20mm Picatinny rail approximately 1 inch (25mm) above the surface of the rail it is mounted to, raising the optic to M4/AR-15 height over bore. This means it will align perfectly with an M4/AR-15 front sight post and most flip-up iron sights; ideal for those who like to "co-witness" their optic and irons. 

If you find you have to bend your neck to get a good view down your red dot sight, a riser is what you need. This riser can be mounted to any 20mm Picatinny railed receiver and is ideal for small "micro red dot sights" like the T1/2 and Docter/RMR style red dot sights due to its compact size.

The QD Sling Swivel Adapter from 8Fields Tactical is intended to work with QD sling sockets to provide a quick swappable sling solution. The set includes a steel QD sling swivel and an extension strap with an elastic cover and a polymer buckle. To connect the adapter to your QD sling socket all you need to do is push the swivel into the socket, where it will lock in place. To remove it simply press the button at the centre of the swivel which will release it from the socket. With this sling adapter you have the choice, you can either mount your sling directly to the steel swivel or make use of the extension strap for a bit more flexibility.

The QD Sling Swivel Adapter from 8Fields Tactical is intended to work with QD sling sockets to provide a quick swappable sling solution. The set includes a steel QD sling swivel and an extension strap with an elastic cover and a polymer buckle. To connect the adapter to your QD sling socket all you need to do is push the swivel into the socket, where it will lock in place. To remove it simply press the button at the centre of the swivel which will release it from the socket. With this sling adapter you have the choice, you can either mount your sling directly to the steel swivel or make use of the extension strap for a bit more flexibility.