Airsoft Mounts

These scope rings are designed to hold an Airsoft rifle scope with a tube diameter of 30mm. Scope rings are useful as they allow you to attach your scope to very small sections of Picatinny rail, such as the small sections often found on sniper rifles. These mounts are High Profile, which means they will hold your Optic a little higher than standard, which is ideal for those who use Lower Face Protection and struggle to aim down their Scope. 

Being a two-piece design they are very easy to install. The scope rings mount to standard Picatinny rail sections, often found atop your Airsoft platform. To secure your rifle scope, you must use an Allen key to take off the top sections of the rings, then place your scope in and reattach the top sections of the rings. 

If you want to take pure advantage of the SSP5's incredible range and accuracy, an optics mount will get you there! The Novritsch 20mm Picatinny Top Rail for SSP5 GBB Pistol is compatible with all variants of the SSP5 GBB and is constructed from CNC machined aluminium for a perfect combination of low weight, high strength and flawlessly in-spec rail dimensions.

The Top Rail is available in two different lengths, a short version measuring approximately 6cm long and a longer version measuring approximately 10.1 cm. The rail is installed on the optics mount section of the fixed SSP5 outer barrel, meaning it says put while you tap tap tap that trigger for easier target acquisition and less chance your optic will take damage from recoil. If you are running your SSP5 as a primary, this mount is essential to make the most of its epic performance!

A pair of scope mounts designed to raise your optic for a more comfortable optic setup.

A pair of scope mounts designed to raise your optic for a more comfortable optic setup.

A high strength sling plate constructed from a dense Alloy that allows you to attach a sling to your AK47 platform weapon.

The WADSN 5 Position Flashlight Mount is a great way to attach your flashlight to your platforms. It mounts to a 20mm RIS/RAS rail, which is the most common rail found on rifles and SMGs. There is a choice of black or dark earth so you can match the mount perfectly to fit the style of your loadout. It features 5 adjustable positions so you can find the perfect setup for your loadout and ensure you dominate any CQB skirmish!

To fit your flashlight you must first loosen the two screws found at the front and back of this mount, once loose, you can slide your torch in. Afterwards, tighten the screws up again and your flashlight and mount are ready to go! The polymer construction means you don't need to worry about having a front-heavy Airsoft gun once fitted. Mount your flashlight using the WADSN 5 Position Flashlight Mount and become a master of close-quarters surprise engagements!

The perfect mount for your torch, able to fit to any 20mm RIS/RAS rail and with 5 adjustable positions.

If you want to rock a red dot on your SSP18, add the Novrtisch SSP18 Red Dot Plate V2! This CNC aluminium red dot plate replaces the rear sight and allows the Novritsch Red Dot Sight - Micro V2 to be mounted, providing faster target acquisition and improved low-light visibility. 

The Red Dot Plate V2 is available in several colour options, from tactical black to eye-catching metallic colours which will really make your SSP18 stand out. Whether you're planning on using your SSP18 as a primary or you want your sidearm to be at the cutting edge of modern handgun configurations, the Novritsch SSP18 Red Dot Plate V2 is ideal!

If you want to rock a red dot on your SSP18, add the Novrtisch SSP18 Red Dot Plate V2! This CNC aluminium red dot plate replaces the rear sight and allows the Novritsch Red Dot Sight - Micro V2 to be mounted, providing faster target acquisition and improved low-light visibility. 

The Red Dot Plate V2 is available in several colour options, from tactical black to eye-catching metallic colours which will really make your SSP18 stand out. Whether you're planning on using your SSP18 as a primary or you want your sidearm to be at the cutting edge of modern handgun configurations, the Novritsch SSP18 Red Dot Plate V2 is ideal!

If you want to rock a red dot on your SSP18, add the Novrtisch SSP18 Red Dot Plate V2! This CNC aluminium red dot plate replaces the rear sight and allows the Novritsch Red Dot Sight - Micro V2 to be mounted, providing faster target acquisition and improved low-light visibility. 

The Red Dot Plate V2 is available in several colour options, from tactical black to eye-catching metallic colours which will really make your SSP18 stand out. Whether you're planning on using your SSP18 as a primary or you want your sidearm to be at the cutting edge of modern handgun configurations, the Novritsch SSP18 Red Dot Plate V2 is ideal!

If you want to rock a red dot on your SSP18, add the Novrtisch SSP18 Red Dot Plate V2! This CNC aluminium red dot plate replaces the rear sight and allows the Novritsch Red Dot Sight - Micro V2 to be mounted, providing faster target acquisition and improved low-light visibility. 

The Red Dot Plate V2 is available in several colour options, from tactical black to eye-catching metallic colours which will really make your SSP18 stand out. Whether you're planning on using your SSP18 as a primary or you want your sidearm to be at the cutting edge of modern handgun configurations, the Novritsch SSP18 Red Dot Plate V2 is ideal!

If you want to rock a red dot on your SSP18, add the Novrtisch SSP18 Red Dot Plate V2! This CNC aluminium red dot plate replaces the rear sight and allows the Novritsch Red Dot Sight - Micro V2 to be mounted, providing faster target acquisition and improved low-light visibility. 

The Red Dot Plate V2 is available in several colour options, from tactical black to eye-catching metallic colours which will really make your SSP18 stand out. Whether you're planning on using your SSP18 as a primary or you want your sidearm to be at the cutting edge of modern handgun configurations, the Novritsch SSP18 Red Dot Plate V2 is ideal!

If you want to rock a red dot on your SSP18, add the Novrtisch SSP18 Red Dot Plate V2! This CNC aluminium red dot plate replaces the rear sight and allows the Novritsch Red Dot Sight - Micro V2 to be mounted, providing faster target acquisition and improved low-light visibility. 

The Red Dot Plate V2 is available in several colour options, from tactical black to eye-catching metallic colours which will really make your SSP18 stand out. Whether you're planning on using your SSP18 as a primary or you want your sidearm to be at the cutting edge of modern handgun configurations, the Novritsch SSP18 Red Dot Plate V2 is ideal!

If you're always bending your neck awkwardly to look down sights, the Novritsch High Riser Mount for Red Dot Sights will cure that! This raised optic mount is patterned after real steel "Hydra" mounts, offering a raised mount for T1/T2 style red dot sights and a 20mm Picatinny rail for a PEQ/DBAL laser unit or scope camera. This mount is designed for 20mm Picatinny rails and includes a steel mounting bolt to secure it to your Airsoft platform's rail.

Constructed from CNC machined aluminium with a steel mounting bolt, this mount fits the Novritsch Red Dot Sight V3, Vector Optics Maverick and Maverick Gen II, Vortex Sparc Solar and Holosun 403B. It should also fit most T1 and T2 clones provided they correctly replicate the real Aimpoint Micro mounting standard. Being slightly higher than a standard T1 mount, the Novritsch High Riser Mount for Red Dot Sights is ideal for those who have a hard time getting a clear sight picture using full face protection, being designed in the real world for use with respirators and night vision devices. 

If you like to keep your smile pretty by wearing lower face or full face protection, the Novritsch High Riser Mount for Red Dot Sights will let you get on target without straining your neck

A set of two High Profile Scope Mount Rings, which will accept a 25mm Optic and easily install to 20mm RIS/RAS/Picatinny Rail Systems. These mounts are High Profile, which means they will hold your Optic a little higher than standard, which is ideal for those who use Lower Face Protection and struggle to aim down their Scope. Being a two-piece design, and coming included with an Allen Key, they are very easy to install.

A set of Alloy constructed Scope Rings for 30mm Optics, that has a 20mm Mount on each ring for easy installation to a 20mm RIS/RAS/Picatinny Rail System. They are Low Profile Rings, which will hold your Optic low against your rail rather than reaching for the sky.

If you have the strong desire to use a red dot and magnifier combination, but you also like to wear full face protection or a respirator, we have just what you need! The WADSN G43 Micro Magnifier Mount is compatible with the Ghost 3x Flip to Side Magnifier and replaces the standard flip to side mount with a raised mount designed to co-witness with EO style red dot sights with the PTS Unity Tactical FAST Riser, or T1/2 style red dot sights with the PTS Unity Tactical FAST Micro Mount. This mount can be raised and lowered to deploy, keeping the sides of your rifle slick and making it easier to manoeuvre with less chance of the magnifier snagging on gear, and making the setup more comfortable to sling. 

If you want to take pure advantage of the superb accuracy and range of the Novritsch SSX23 NBB pistol, the Novritsch SSX23 Red Dot Plate V2 is what you need! This red dot mount plate is constructed from CNC machined aluminium and designed to mount directly to the SSX23 slide, providing mounting holes for the Novritsch Red Dot Micro V2 and other red dot sights which use the Leupold DeltaPoint Pro® mounting standard/footprint. 

Adding a red dot sight can make all the difference, especially when installed on a long range beast like the SSX23. If you want to acquire your targets faster, aim intuitively in low-light conditions and make your SSX23 look amazing, the Novritsch SSX23 Red Dot Plate V2 gets you half way there!

The UNITY Tactical mounts are being favoured worldwide due to their slim profile & efficient elevation, making them an excellent candidate for use with PEQ / Laser pointers mounted on the upper rail or for bringing your optic over your irons.

Customise your MLOCK handguard with this easy to attach Harris lug for use with bipods and slings. Constructed from aluminium, the attachment is sturdy and well-weighted.

A set of two High Profile Scope Rings for 30mm Optics, that will easily connect to 20mm RIS/RAS Picatinny Rail Systems. They have a two-piece design which makes installation very easy, and comes included an Alley Key to aid installation. They are High Profile Rings which will hold the Scope higher than standard, making it easier to aim whilst wearing Lower Face Protection.

A Quick Release Sling Loop for QD Sling Sockets, allowing you to install a Sling Loop that can be quickly released at the press of a button. This makes it ideal for handing your replica over for Chrono, or if you have multiple guns with QD sockets you can switch primaries in a hurry without taking your sling off!

If you're running an MRO replica and you're getting jealous of T1 users with their snazzy mounts, this should sort that out! The PTS Syndicate Unity Tactical FAST MRO Mount is constructed from CNC Machined aluminium with steel mounting apparatus and boasts licenced Unity Tactical trademarks, just like the real thing! 

The FAST MRO mount is compatible with any red dot sight which uses the MRO mounting standard (most likely only real steel MRO, MRO HD and some MRO clones) and includes a built-in backup rear sight designed to align with standard AR front sights and flip up sights, with windage adjustment available via the dial on the right side. 

Like the FAST Micro Mount designed for T1 footprint red dots, this mount puts your MRO red dot at 2.26" above the bore, giving you a more comfortable neck position when shooting, especially if you use full face protection or active hearing protection. If you want to give your MRO red dot a fresh mount with a modern look and give yourself a more comfortable shooting experience, the PTS Syndicate Unity Tactical FAST MRO Mount will do just that!

If you're running an MRO replica and you're getting jealous of T1 users with their snazzy mounts, this should sort that out! The PTS Syndicate Unity Tactical FAST MRO Mount is constructed from CNC Machined aluminium with steel mounting apparatus and boasts licenced Unity Tactical trademarks, just like the real thing! 

The FAST MRO mount is compatible with any red dot sight which uses the MRO mounting standard (most likely only real steel MRO, MRO HD and some MRO clones) and includes a built-in backup rear sight designed to align with standard AR front sights and flip up sights, with windage adjustment available via the dial on the right side. 

Like the FAST Micro Mount designed for T1 footprint red dots, this mount puts your MRO red dot at 2.26" above the bore, giving you a more comfortable neck position when shooting, especially if you use full face protection or active hearing protection. If you want to give your MRO red dot a fresh mount with a modern look and give yourself a more comfortable shooting experience, the PTS Syndicate Unity Tactical FAST MRO Mount will do just that!

If you're a talented skirmisher with skills to showcase, the Novritsch GoPro Adapter for 20mm Picatinny Rails should suit you perfectly. This CNC aluminium mount attaches to any 20mm Picatinny rail and provides a mount for GoPro-style action cameras with the socket mount. Please note, the barrel-mounted rail shown in the images is for demonstration purposes only and is not included with the set. 

The mount can be fitted to position the camera on the left or right side of your primary and only minimally affects the weight distribution and balance thanks to its lightweight aluminium build. If you have epic Airsoft moments to record for the ages, the Novritsch GoPro Adapter for 20mm Picatinny Rails is what you need!

If you have damaged your suppressor mount on your CM.041 SD AEG you may think you are out of luck, but thanks to CYMA expanding its line of replacement parts you can now swap the mounting apparatus out for a fresh new mount, and have your integrally suppressed SMG rocking its suppressor again!

If you're recreating the latest real-world German DMR rifle, the East Crane 20mm Picatinny Scope & Red Dot Mount for G-417 Replicas will put a smile on your face! Patterned after the mount setup provided with the real steel G28 DMR, this set includes a dual ring mount for either 25 or 30mm monotube scopes and a red dot sight mount with a built-in sunshade, designed for T1 footprint/mounting standard micro red dot sights. The set includes spacers to allow a 25mm monotube scope to be mounted, though by default the dual ring mount fits 30mm monotubes.

Both the scope and red dot mount are constructed from aluminium with steel bolts, nuts and screws, mounting to 20mm Picatinny rails. The dual scope ring includes a 20mm Picatinny rail on the top of each ring which is intended to allow the red dot sight mount to be fitted, though these are removable if you want to use the two mounts on separate platforms. On the right side of the mount, you'll find helpful engraved markings indicating the mounting direction, just like the real deal.

While it is designed to mimic the real G28 mount setup and is ideally paired with the East Crane EC-204 G-417 DMR, this mount setup will work on any platform with 20mm Picatinny rails and the included T1 mount has been sighted on MP5 and G36 platforms used by the German Armed Forces and Police. Whether you're replicating the real steel G28 or looking for a pair of unique mounts packaged together, the East Crane 20mm Picatinny Scope & Red Dot Mount for G-417 Replicas would be a slick setup for your primary!

If you're always bending your neck awkwardly to look down sights, the Novritsch High Red Dot & PEQ Box Mount V3 will cure that! This raised optic mount is patterned after real steel "Hydra" mounts, offering a raised mount for T1/T2 style red dot sights and a 20mm Picatinny rail for a PEQ/DBAL laser unit or scope camera. This mount is designed for 20mm Picatinny rails and includes a pair of "recoil lugs" on the bottom which hold it in place firmly on your rail. 

Constructed from CNC machined aluminium with steel mounting bolts, this mount fits the Novritsch Red Dot Sight V3, Vector Optics Maverick and Maverick Gen II, Vortex Sparc Solar and Holosun 403B. It should also fit most T1 and T2 clones provided they correctly replicate the real Aimpoint Micro mounting standard. Being slightly higher than a standard T1 mount, the High Red Dot & PEQ Box Mount V3 is ideal for those who have a hard time getting a clear sight picture using full face protection, being designed in the real world for use with respirators and night vision devices. 

If you like to keep your smile pretty by wearing lower face or full face protection, the Novritsch High Red Dot & PEQ Box Mount V3 will let you get on target without straining your neck!

An official spare sling hook, allowing for the replacement of the lost or broken part of your Airsoft Scorpion Evo. 

If you are rocking a KAR98k but you want some modern glass, this is a great way to get the job done! The 20mm Picatinny rail mount from Double Bell is designed to fit to their KAR98K sniper rifle and provide a 20mm rail above the receiver, allowing you to mount modern optical sights. The rail mounts into the rear sight mounting apparatus and provides you with 17 slots of 20mm rail, plenty to mount whatever you like. We advise against adding a PEQ, flashlight and T1 but it's your gun and there is enough space, just be ready to run if a reenactor spots you!