All External Airsoft Parts & Attachments

An Alloy suppressor, designed to fit both Airsoft Sniper Rifles and Standard Airsoft AEG that uses a 14mm CCW outer barrel end.

If you want the stealthy aesthetic for your SMG or rifle, this is how you do it! The VORSK QD Suppressor with 5-Lug Flash Hider; 14mm CCW is compatible with the VORSK VMP series and now any Airsoft replica with a 14mm CCW male threaded barrel thanks to the inclusion of the super aggressive 5-lug flash hider. The suppressor mounts to the 5-lug muzzle device via a QD interface, meaning it can quickly be removed and reinstalled when needed.

Constructed from aluminium with a foam filling, this suppressor should dampen the muzzle report of your SMG or rifle slightly but its main role is to provide slick looks. There also is plenty of space inside to fit a custom foam filling or tracer module if you are happy with a bit of fabrication!

With this muzzle device you can keep your AEG looking like the real thing! The VFC Bird Cage Flash Hider replicates the real M4 muzzle brake seen on service rifles and is constructed from steel with 14mm CCW threading. Real muzzle brakes are designed to reduce felt recoil by redirecting gas out of the ports on each side, and although you won't get this effect with an Airsoft muzzle brake it will give your Airsoft rifle a modern, iconic look.

Its steel construction and black finish are sure to withstand most bumps and scrapes on the battlefield, making it the perfect way to keep your outer barrel and precious inner barrel safe from damage.

This VFC 4" Barrel Extension will sit on the end of your current 14mm outer barrel and provide 4" of extra barrel length but keep the same male 14mm CCW threading which can make all the difference when trying to get your muzzle device to sit perfectly on the end of your platform. Alternatively, it is perfect for making your outer barrel ridiculously long, if you are trying to achieve one seriously mean-looking DMR.

This barrel extension is extremely useful for mounting tracer units and large suppressors on platforms which you previously couldn't.

If you're recreating the latest real-world German DMR rifle, the East Crane 20mm Picatinny Scope & Red Dot Mount for G-417 Replicas will put a smile on your face! Patterned after the mount setup provided with the real steel G28 DMR, this set includes a dual ring mount for either 25 or 30mm monotube scopes and a red dot sight mount with a built-in sunshade, designed for T1 footprint/mounting standard micro red dot sights. The set includes spacers to allow a 25mm monotube scope to be mounted, though by default the dual ring mount fits 30mm monotubes.

Both the scope and red dot mount are constructed from aluminium with steel bolts, nuts and screws, mounting to 20mm Picatinny rails. The dual scope ring includes a 20mm Picatinny rail on the top of each ring which is intended to allow the red dot sight mount to be fitted, though these are removable if you want to use the two mounts on separate platforms. On the right side of the mount, you'll find helpful engraved markings indicating the mounting direction, just like the real deal.

While it is designed to mimic the real G28 mount setup and is ideally paired with the East Crane EC-204 G-417 DMR, this mount setup will work on any platform with 20mm Picatinny rails and the included T1 mount has been sighted on MP5 and G36 platforms used by the German Armed Forces and Police. Whether you're replicating the real steel G28 or looking for a pair of unique mounts packaged together, the East Crane 20mm Picatinny Scope & Red Dot Mount for G-417 Replicas would be a slick setup for your primary!

If you like your rifle looking like a real steel rifle then you need this! The G&G Armament Knights Armament URX4 13'' Handguard is a replica of a real steel handguard but much more affordable and designed specifically for Airsoft. It is constructed from superb CNC aluminium with a flawless finish, guaranteeing perfect in-spec attachment. A tremendous handguard designed for those who like to keep their platforms looking stylish and effective.

This handguard measures 13 inches in overall length and is equipped with a 20mm Picatinny rail on top and M-LOK slots at 3, 6 and 9 o'clock positions with extra slots at the offset angles so you can position your accessories in the perfect position. The handguard also comes equipped with steel QD points at the receiver side. This is perfect for those who like to sling their rifles or use other QD attachments.

If you want to use your 20mm Picatinny accessories with a KeyMod handguard, the  Vector Optics Picatinny Rail Section for KeyMod; 124mm is what you need! This 20mm rail section is constructed from Aluminium and has 124mm of available rail space, so you can mount your mission essentials anywhere. This rail has a sleek skeletonised look, with weight-reducing cutouts and less angled corners, keeping your rail slick and avoiding sharp corners, a major ergonomic pitfall.

If you're dressing up your KeyMod rail but prefer to use your 20mm accessories rather than buying new KeyMod bits, the Vector Optics Picatinny Rail Section for KeyMod; 124mm is ideal. KeyMod is cool but you can't go wrong with some extra 20mm Picatinny rail space!

If you're tricking out your M4/AR-15 AEG, the G&G Armament M4 AEG Pistol Grip is a great affordable option! This grip follows the standard M4/AR-15 AEG pattern and should fit any M4/AR-15 AEG which follows the original Tokyo Marui build style.

The style of this pistol grip replicates the real steel "A2" finger-ridged pistol grip commonly found on military-issue M4, M16 and MK18 rifles. This grip has an ergonomic design with a finger ridge for improved comfort whilst aiming down sights and carrying your platform. The set includes a heatsink motor baseplate pre-installed. If you're going for a military-style build, this is the grip for you!

The ARCTURUS Russian Pistol Grip For AEG AK12/AKM/AK74 is constructed from high-density polymer and fits most ARCTURUS AKs, but also VFC platforms and VFC clones such as CYMA and Double Bell. It is designed to replicate real-world pistol grips and enhances the usual AK lack of ergonomics. It features finger ridges for perfect handling in any condition and exceptional comfort, both for gloved and ungloved users.

If you want to drag your AK platform into the 21st century and improve the ergonomics drastically, the ARCTURUS Russian Pistol Grip For AEG AK12/AKM/AK74 is exactly what you need! It also includes the necessary screw for attaching it to your Russian replica rifle.

The Angry Gun QDC 3-Prong Flash Hider matches the design of real steel flash hiders such as the ones found on AUGs. It is constructed from steel making it extremely durable and sure to withstand any skirmish. This muzzle device is designed to work with other Angry Gun QDC attachments such as their suppressor and tracer unit. These products interlock seamlessly guaranteeing a reliable attachment every time.

This flash hider mounts to 14mm CCW threading, commonly found on most Airsoft assault rifles. It also has a grub screw so you can ensure it is securely attached to your replica with no worries about it coming off. The flash hider also comes with a stainless steel shim, to make sure that it is situated perfectly on your rifle's outer barrel.

If you want a super realistic flash hider that is compatible with Angry Gun QDC suppressors and tracers, this is the one for you! Its steel construction and real steel design certify that this flash hider is perfect for any skirmisher seeking a realistic loadout.

The Double Eagle PDW Style stock for M4/AR-15 Rifles is a great replacement or enhancement for your platform with a "Honey Badger" receiver. Due to the width of the alloy stock bars, it only fits this style of receiver and will not fit standard M4 receivers. It provides 3 adjustment positions, so you can decide how compact you want your playstyle to be. To adjust the stock position, press down both buttons located on either side of the stock then slide the stock to your desired position.

The butt plate is constructed from high-density polymer and features a skeletonised design, it provides comfort and security when wearing full-body gear and operating from modern shooting stances. The buffer tube has an angled cheek pad for improved comfort when aiming down sights.

The battery compartment is located within the buffer tube and can be accessed by pushing down on the tab on top of the buffer tube. It provides roughly 11cm of battery space allowing for most common batteries. However, you must ensure that you select an appropriately sized battery, so that you don't crush it in the tight space.

If you want to make your AK a little more... AK. Then the LCT AK104 Flash Hider is for you! This flash hider is a replica of the real steel AK104 trumpet-style flash hider. It attaches to 24mm CW threading and is constructed from steel, giving it a hefty weight and a realistic feel. It has a wear-resistant finish and its sturdy construction ensures that it will survive more than its fair share of skirmish-related bumps.

To fit this flash hider on more common threads you will need a 24mm to 14mm thread adapter. Give your AK the classic look with a real steel-styled flash hider and keep your AK in the 20th century, right where it belongs.

The G&G Armament Knights Armament 3 Prong Flash Hider matches the design of real steel flash hiders. It is constructed from steel making it extremely durable and sure to withstand any skirmish. It mounts to 14mm CCW threading, commonly found on most Airsoft assault rifles. To attach it, simply twist it onto your rifle's outer barrel and then you're good to go! It features a very aggressive design that will make any platform ten times more aggressive.

This flash hider also has the added realism of being licensed by Knights Armaments, the real steel firearm company. Although there are no visible trademarks on the flash hider itself, it gives you peace of mind knowing that this muzzle device has been made to the standards of a real steel manufacturer.

If you want a super realistic flash hider for your Airsoft platform, this is the one for you! Its steel construction and real steel design certify that this flash hider is perfect for any skirmisher seeking a realistic loadout.

This lens protector is a must-have product for any Airsoft Skirmisher who intends to play in a CQB environment, protecting your sights and scopes from being shot out by stray BB. Guess what's cheaper: A new sight or lens protector?

Ships with peel-off protective film to keep the lens perfectly clear when you attach it to your RIF. 

A low profile ergonomic & stippled grip constructed from Polymer for attaching to Airsoft 20mm RIS rail systems.

A perfect grip for people with all sized hands. Secures in no time with only one bolt to care about.

A perfect grip for people with all sized hands. Secures in no time with only one bolt to care about.

If you prefer the tried and tested vertical foregrip over other gripping options but want something a little more modern than the average VFG, the Specna Arms Angled Vertical Foregrip may be just what you have been looking for! This grip can be attached to any 20mm Picatinny rail surface and features a slightly swept-back angle, intended to encourage a more comfortable wrist position whilst still making use of the advantages of a traditional vertical foregrip.

A mock suppressor designed to fit on Airsoft Rifles and other Weapons to give the weapon a more tactical look.

A spare or replacement stock with internal battery space for Airsoft replica M4 / M16s AEGs, or other Airsoft guns with an AEG Spec Buffer Tube. 

A spare or replacement stock with internal battery space for Airsoft replica M4 / M16s AEGs, or other Airsoft guns with an AEG Spec Buffer Tube. 

A Nylon cover designed to protect and improve the aesthetics of any suppressor or barrel it's installed on. Whether you want to protect your suppressor from scratches and scuffs or you want to blend in more effectively with your environment, the Viper Tactical Suppressor Cover will do the trick!

A Nylon cover designed to protect and improve the aesthetics of any suppressor or barrel it's installed on. Whether you want to protect your suppressor from scratches and scuffs or you want to blend in more effectively with your environment, the Viper Tactical Suppressor Cover will do the trick!

A Nylon cover designed to protect and improve the aesthetics of any suppressor or barrel it's installed on. Whether you want to protect your suppressor from scratches and scuffs or you want to blend in more effectively with your environment, the Viper Tactical Suppressor Cover will do the trick!

A Nylon cover designed to protect and improve the aesthetics of any suppressor or barrel it's installed on. Whether you want to protect your suppressor from scratches and scuffs or you want to blend in more effectively with your environment, the Viper Tactical Suppressor Cover will do the trick!

A Nylon cover designed to protect and improve the aesthetics of any suppressor or barrel it's installed on. Whether you want to protect your suppressor from scratches and scuffs or you want to blend in more effectively with your environment, the Viper Tactical Suppressor Cover will do the trick!

The CQB Front Grip from Big Dragon is designed to provide increased weapon control for those who prefer not to use vertical foregrips. This grip enables modern shooting grips such as the C-Clamp and gives the user a low profile, snag-free solution which assists rapid transitioning from target to target.

If you're searching for a modern vertical foregrip with slick styling and flawless handling, the Delta Armory B5 Vertical Foregrip for 20mm Picatinny Rails is ideal. This vertical grip is available in two styles; short for those who like to use the "C-clamp" or thumb-over-bore grip and long for more traditional vertical grip holds. Each style includes grippy crackle texture on each side and linear serrations on the front, giving you ample traction without becoming uncomfortable without gloves.

The B5 mounts to 20mm Picatinny rails via its steel mounting apparatus and also includes a storage compartment inside, ideal for tactical snacks to keep energy high or accessory batteries for long-duration operations. If you want more control over your primary when sweeping rapidly between targets, the Delta Armory B5 Vertical Foregrip for 20mm Picatinny Rails will do the trick!

Constructed from durable alloy and is foam filled to assist in suppressing muzzle sounds. 

A mock suppressor designed to replace the standard flash hiders on Airsoft replica weapons, by using the same 14mm counter clockwise outer barrel threads, and features zombie hunter insignia.