M4 & AR-15 Variant Airsoft Assault Rifles

If you need a light and tight AR PDW platform but nothing on the market currently scratches that itch, the Double Eagle M923G DEX556 may well be the one! This M4/AR-15 style AEG is constructed primarily from high density polymer with alloy and aluminium parts where needed and is packing the seriously slick Double Eagle FALCON EFCS MOSFET pre-installed for a frightening trigger response, 11.1V LiPo compatibility and a crazy rate of fire.

To deliver rounds accurately onto your unfortunate target, a 6.04mm tightbore inner barrel paired with a rotary HOP-up unit is fitted, giving you a head start over many M4/AR-15 AEGs in this price range with a raise in FPS and accuracy from the tightened bore and more effective HOP-up performance to extend your range. Whether you are in search of a new CQB primary or you like to fight light and aggressively outdoors, the Double Eagle DEX556 will see you well equipped!

If you're seeking a light and fast M4 platform to handle engagements at all ranges, the DA-C07-EGL CHARLIE™ KeyMod Predator M4/AR-15 AEG should be right up your street. This M4/AR-15 AEG boasts an elite look on the outside, rocking a pre-installed aluminium micro suppressor, mock KeyMod handguard complete with modular rail sections and the latest and greatest stock/grip combo featured on the Delta Armory R15 FREYA™ series.

While the internals of the DA-C07-EGL are similarly equipped to the original CHARLIE™ series, the addition of the new EAGLE™ ETU adds a whole new level of functionality. Using only the trigger and fire selector of the gun itself, you can program the EAGLE™ for burst modes of various duration, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking, giving you an incredibly advanced M4 AEG for an entry-level price!

If you like the idea of a lightweight polymer build with the ability to run burst mode, customise trigger sensitivity and much more, the Delta Armory DA-C07-EGL CHARLIE™ KeyMod Predator M4/AR-15 AEG belongs in your arsenal!

If you're seeking a light and fast M4 platform to handle engagements at all ranges, the DA-C07-EGL CHARLIE™ KeyMod Predator M4/AR-15 AEG should be right up your street. This M4/AR-15 AEG boasts an elite look on the outside, rocking a pre-installed aluminium micro suppressor, mock KeyMod handguard complete with modular rail sections and the latest and greatest stock/grip combo featured on the Delta Armory R15 FREYA™ series.

While the internals of the DA-C07-EGL are similarly equipped to the original CHARLIE™ series, the addition of the new EAGLE™ ETU adds a whole new level of functionality. Using only the trigger and fire selector of the gun itself, you can program the EAGLE™ for burst modes of various duration, binary trigger, sniper delay, semi-auto only, AUG mode, pre-cocking, trigger sensitivity and active braking, giving you an incredibly advanced M4 AEG for an entry-level price!

If you like the idea of a lightweight polymer build with the ability to run burst mode, customise trigger sensitivity and much more, the Delta Armory DA-C07-EGL CHARLIE™ KeyMod Predator M4/AR-15 AEG belongs in your arsenal!

If you're in search of a lightweight rifle that doesn't compromise on style then you're in luck! The Specna Arms SA-F09 FLEX™ HAL¹ ETU M4/AR-15 AEG is constructed almost entirely from polymer, making it perfect for new skirmishers or veterans looking for something easier on the arms. This version is SA-F09 Specna's HAL¹ ETU, offering programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-FX01, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight raise in FPS from the same strength spring.

With Specna's ultra-strong high-density polymer and the option of using 20mm Picatinny or cutting-edge M-LOK accessories, this is one of the best-value AEG platforms on the market. Whether you're a new skirmisher looking for a long rifle shape with more features than the average or a veteran looking for some precision with a lightweight DMR-type, the Specna Arms SA-F09 FLEX™ HAL¹ ETU M4/AR-15 AEG will be an asset to you!

For those who want a lightweight and affordable platform, no matter your skirmishing experience, the Specna Arms SA-F05-RL FLEX™ HAL¹ ETU™ M4/AR-15 AEG is the perfect rifle for you! The SA-F05-RL follows Specna's FLEX™ build style, constructed predominantly from high-density polymer with an alloy outer barrel, resulting in a lightweight and agile build which won't have your arms burning after a gameday!

Inside, we are treated to a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, offering superb accuracy potential and improved air efficiency, giving you a slight FPS boost with the same strength spring. Also inside is the HAL¹ MOSFET, offering a range of programmable fire modes usually only present in platforms twice this price!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. That's one heck of a feature set for such a low-cost platform! If you're looking for a low-cost, lightweight primary but demand advanced internals, the Specna Arms SA-F05-RL FLEX™ HAL¹ ETU™ M4/AR-15 AEG is what you need!

If you're looking for a lightweight build with heavyweight effect downrange, the Delta Armory DA-C04-EGL CHARLIE™ 10" KeyMod M4/AR-15 AEG should be on your radar. This CHARLIE™ line AEG is based on the original DA-C04 but equipped with the new EAGLE™ MOSFET/ETU system, offering a wide variety of programmable fire controls, pre-cocking and active braking.

For a platform in this price range, we are genuinely shocked at the volume of features packed into the EAGLE™, rivalling high-end MOSFETs but with the convenience of all modes being accessible through the trigger and fire selector, with no need for apps, firmware updates or other extras. The EAGLE joins the already rock-solid CHARLIE™ series internals, including an SHS piston with a full rack of steel teeth and an SHS tappet plate to guarantee reliable feeding.

If you're looking for a mid-range platform ideal for a fast-moving skirmisher which can be converted into a DMR with a quick change of the mainspring and reprogramming of the MOSFET, the DA-C04-EGL CHARLIE™ 10" KeyMod M4/AR-15 AEG from Delta Armory is exactly that!

If you're looking for a lightweight build with heavyweight effect downrange, the Delta Armory DA-C04-EGL CHARLIE™ 10" KeyMod M4/AR-15 AEG should be on your radar. This CHARLIE™ line AEG is based on the original DA-C04 but equipped with the new EAGLE™ MOSFET/ETU system, offering a wide variety of programmable fire controls, pre-cocking and active braking.

For a platform in this price range, we are genuinely shocked at the volume of features packed into the EAGLE™, rivalling high-end MOSFETs but with the convenience of all modes being accessible through the trigger and fire selector, with no need for apps, firmware updates or other extras. The EAGLE joins the already rock-solid CHARLIE™ series internals, including an SHS piston with a full rack of steel teeth and an SHS tappet plate to guarantee reliable feeding.

If you're looking for a mid-range platform ideal for a fast-moving skirmisher which can be converted into a DMR with a quick change of the mainspring and reprogramming of the MOSFET, the DA-C04-EGL CHARLIE™ 10" KeyMod M4/AR-15 AEG from Delta Armory is exactly that!

If you're in the market for an affordable M4/AR-15 AEG with programmable fire controls and a lightweight polymer build, the Delta Armory DA-C06 CHARLIE™ Silent Ops M4/AR-15 AEG is what you need. This integrally suppressed M4/AR-15 is rocking the sneaky "Honey Badger" look and is equipped with a quad rail handguard for all your accessory needs. Unlike a real suppressor, the integral example installed on the DA-C06 CHARLIE™ serves to conceal an extended 6.03mm tightbore inner barrel, giving this short and sneaky-looking platform surprising long-range effectiveness. 

As with the other offerings in the Delta Armory CHARLIE™ range, the tightbore inner barrel is paired with a rotary HOP-up unit, and a pre-upgraded gearbox featuring an SHS tappet plate and piston, 7mm bushings and a quick change spring guide. This gives you a respectable pre-upgraded feature set straight out of the box, with plenty of room for further upgrades thanks to full Tokyo Marui compatibility. Whether you are new to the sport or a veteran skirmisher looking for a sneaky backup platform, the Delta Armory DA-C06 is the best AR in this style and price range we have seen!

If you're in the market for an affordable M4/AR-15 AEG with programmable fire controls and a lightweight polymer build, the Delta Armory DA-C06 CHARLIE™ Silent Ops M4/AR-15 AEG is what you need. This integrally suppressed M4/AR-15 is rocking the sneaky "Honey Badger" look and is equipped with a quad rail handguard for all your accessory needs. Unlike a real suppressor, the integral example installed on the DA-C06 CHARLIE™ serves to conceal an extended 6.03mm tightbore inner barrel, giving this short and sneaky-looking platform surprising long-range effectiveness. 

As with the other offerings in the Delta Armory CHARLIE™ range, the tightbore inner barrel is paired with a rotary HOP-up unit, and a pre-upgraded gearbox featuring an SHS tappet plate and piston, 7mm bushings and a quick change spring guide. This gives you a respectable pre-upgraded feature set straight out of the box, with plenty of room for further upgrades thanks to full Tokyo Marui compatibility. Whether you are new to the sport or a veteran skirmisher looking for a sneaky backup platform, the Delta Armory DA-C06 is the best AR in this style and price range we have seen!

This lightweight and incredibly effective Airsoft Electric Gun is powered by a Battery in the Stock, and features Double Eagle's Fire Control System, which allows for programmable Trigger Modes (including Binary Fire), as well as giving you excellent Trigger Response. The package is completed by a Quick Change Spring System, making it suitable for just about any field! If you want to be light on your feet and as effective as all the 'modded/custom guns' without having to break the bank, the Double Eagle M904 Falcon Fire Control Series are the perfect choice.

If you're looking for an AR-15 with a unique look, you've found it! Built in partnership between ActionSportGames, ICS and HERA ARMS this rifle is an Airsoft gun like no other. Based on the AR-15 Mil-spec variant of the HERA ARMS CQR this rifle uses ICS's brand new SSS AEG Gearbox design and is officially licensed and fully trademarked.

The Airsoft replica itself is constructed from a mixture of high quality alloys and polymers, with an Alloy Receiver, Handguard Outer Barrel and Internals, with a Polymer Stock, Magazine, Foregrip and Flip-up Iron Sights. The rifle features a high quality finish, with heavy duty materials leading to a highly detailed and realistic looking rifle. The rifle isn't just a quality build, it also come fully trademarked with all the textual markings and logo shown on the real rifle for higher levels of realism.

Custom external components come together to create one unique looking M4. Constructed from tough, but lightweight polymer, the M4 is a solid platform, supported by many systems and featuring a highly customisable top rail, which in total is 21'' in length, there are a huge array of options to customise this AEG.

With this rifle being on the longer side, it's a perfect entry level custom M4 for skirmishing outdoors and taking out longer range targets.

If you're a practical skirmisher seeking a lightweight and cost-effective primary ready to host the most modern accessories, the Specna Arms SA-F08 FLEX™ HAL¹ ETU M4/AR-15 AEG is one to watch. Being part of Specna's FLEX™ line, this AEG is constructed almost entirely from high density polymer with a solid alloy outer barrel, ideal for mobile, agile and hostile playstles!

Inside, we are treated to Specna's latest programmable MOSFET, known as the HAL¹. The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original SA-F08, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight increase in FPS from the same strength spring.

On the outside, the SA-F08 is equipped with a 14mm CCW male threaded barrel, ready for a tracer unit or suppressor, an M-LOK handguard for your mission essential doo-dads, grips and other handling enhancements and a 20mm Picatinny railed receiver, ready for your choice of optical sight. If you're looking for an affordable entry point to Airsoft which will keep you competitive, the Specna Arms SA-F08 FLEX™ HAL¹ ETU M4/AR-15 AEG is a fantastic choice!

If you're looking for an affordable beginner Airsoft gun with a unique look, the CYMA CM.508 M4A1 S-System AEG should be right up your street! This M4 AEG is battery-powered and constructed predominantly from ABS polymer with an alloy version 2 gearbox based on the Tokyo Marui design. This keeps the build light and easy to move with, ideal for younger skirmishers or those looking for something lighter than a full metal primary for late in the skirmish day. 

The alloy version 2 gearbox the CM.508 is based around is equipped with 18:1 standard ratio gears running on 8mm steel bushings, a type 1 cylinder, reinforced polymer compression parts and a quick change spring system. Also inside is a 6.03mm tightbore inner barrel and an updated rotary HOP-up unit, giving you above-average accuracy potential and the latest HOP-up unit design for M4/AR-15 AEG platforms. All internal parts are standard Tokyo Marui AEG spec, meaning the sky is the limit when it comes to upgrades later down the line!

On the outside, the CM.508 is ready for 20mm Picatinny accessories such as red dot sights, scopes, tactical flashlights, lasers and vertical grips, ready to be customised for the mission at hand. The barrel is threaded to 14mm CCW male, meaning suppressors and tracer units can be added for sneaky styling and an instinct-aiming advantage. If you want to try your hand at Airsoft skirmishing or target shooting without breaking the bank, the CM.508 M4A1 S-System AEG from CYMA is the most affordable way to do it!

Ever wanted AK-sized magazines on a rifle that handles like an M4? If so you have found your niche!

The M918G is a replica of the AR47 rifle which was designed for special forces troops operating behind enemy lines with limited access to NATO ammunition.

It is constructed almost from reinforced polymer, with an alloy outer barrel and buffer tube to provide a strong backbone and well-rounded weight balance. The rifle also boasts more than its fair share of internal enhancements, especially when you consider the price of this AEG!

Ever wanted AK-sized magazines on a rifle that handles like an M4? If so you have found your niche!

The M918G is a replica of the AR47 rifle which was designed for special forces troops operating behind enemy lines with limited access to NATO ammunition.

It is constructed almost from reinforced polymer, with an alloy outer barrel and buffer tube to provide a strong backbone and well-rounded weight balance. The rifle also boasts more than its fair share of internal enhancements, especially when you consider the price of this AEG!

If you love the military look and like to dabble in GBBRs, the EMG CGS Daniel Defense DDMK18 GBBR should suit you perfectly. This full metal GBBR is licenced by Daniel Defense through EMG, boasting immaculate engraved trademarks across the design, and is based on the much-lauded Tokyo Marui ZET System internally, which is excellent news! 

The ZET system is widely regarded as the best GBBR internal system around, and CGS (CYMA Gas System) has made it even better, throwing in a generous complement of steel parts including the bolt carrier, trigger group and bolt catch. This means a longer lifespan than rival GBBRs and heavier recoil thanks to the added mass from the steel bolt carrier. Also inside is a 6.04mm tightbore inner barrel, a nice deal sweetener that improves gas efficiency and accuracy. If you've been weighing up getting into the GBBR game but the cost of fully upgrading a ZET System puts you off, this one has all the steel parts built in!

If you love the military look and like to dabble in GBBRs, the EMG CGS Daniel Defense DDMK18 GBBR should suit you perfectly. This full metal GBBR is licenced by Daniel Defense through EMG, boasting immaculate engraved trademarks across the design, and is based on the much-lauded Tokyo Marui ZET System internally, which is excellent news! 

The ZET system is widely regarded as the best GBBR internal system around, and CGS (CYMA Gas System) has made it even better, throwing in a generous complement of steel parts including the bolt carrier, trigger group and bolt catch. This means a longer lifespan than rival GBBRs and heavier recoil thanks to the added mass from the steel bolt carrier. Also inside is a 6.04mm tightbore inner barrel, a nice deal sweetener that improves gas efficiency and accuracy. If you've been weighing up getting into the GBBR game but the cost of fully upgrading a ZET System puts you off, this one has all the steel parts built in!

If you're searching for a top-tier primary you'll never need to upgrade, get eyes on the Novritsch SSR4 Mk2 M4/AR-15 AEG! This is the latest iteration of the SSR4, boasting a fresh new look with its unique receiver, handguard and muzzle brake design with all the best bits from the original game-changing SSR4 platform.

Inside, you'll find CNC steel 16:1 gears, a 30K high-torque motor, CNC aluminium compression parts and a 6.03mm tightbore inner barrel paired with a rotary TDC HOP-up unit, just like the original. What's changed? The Mk2 boasts a super-strong reinforced gearbox shell and modular adjustable trigger system, resulting in a longer lifespan and more customization options than ever before!

On the outside, a lot has changed, including a new magnetic dust cover for more convenient HOP-up adjustment, a new buffer tube mount design which allows for easier access to the quick change spring system, not to mention the exterior design which leans into the Novritsch aesthetic with its dynamic swept back handguard and muzzle brake design. If you're after an M4/AR-15 platform with proven internals designed for pure skirmish performance and packed with user-friendly features, the Novritsch SSR4 Mk2 M4/AR-15 AEG is the one!

Whether you're new to the game and looking to start out with a full metal platform bristling with advanced features or a veteran skirmisher in search of an M4 AEG you can just pick up and go with, the Delta Armory DA-A06-EGL ALPHA™ KeyMod 10" M4/AR-15 AEG is a fine choice. A realistically hefty full metal build with a cutting-edge aesthetic at just the right length to do its dirty work both outdoors and in CQB, the DA-A06-EGL is ready for any challenge that faces it. 

Equipped with a KeyMod handguard, sound-amplifying muzzle device and modernised receiver on the outside and kitted out with SHS reinforced parts, a 6.03mm tightbore inner barrel and the EAGLE™ programmable MOSFET on the inside, the DA-A06-EGL is an extremely competitive platform, both on price and in game! The EAGLE™ allows you to enhance trigger response with pre-cocking for CQB or select burst mode, binary trigger or AUG mode to improve hit probability outdoors, with the additional option of locking the gearbox to semi-auto only for DMR duty. 

If you're after a new M4 AEG but don't like to commit to a particular build direction, the DA-A06-EGL won't make any decisions for you! Thanks to the "Barbie for men" modularity of the AR platform and the highly flexible EAGLE™ ETU, the DA-A06-EGL ALPHA™ KeyMod 10" M4/AR-15 AEG is ready to accept a full compliment of accessories, be kitted out just how you like it and give the enemy team what for when it comes to skirmish day!

The Double Eagle M904R is a lightweight but extremely effective Airsoft Electric Gun, powered by a Battery in the Stock. It is based around the 'Falcon Fire Control System' which offers a highly programmable and incredibly well-responding Trigger. If you're a fan of staying light on your feet, flanking the enemy and generally causing mayhem, this Airsoft Gun will do you proud on the skirmish field.

MK18 fans, rejoice! The DA-A07-EGL ALPHA™ MK18 MOD.1 M4/AR-15 AEG is yet another fantastic full metal MK18 option, equipped with full metal ALPHA™ standard externals and Delta Armory's latest programmable MOSFET, known as the EAGLE™.

The EAGLE™ programmable MOSFET offers more fire mode and customisation options than ever before. With sniper delay, AUG mode, semi-auto only, 3 or 5-round burst, binary trigger and selectable pre-cocking available, the DA-A07-EGL offers more options than any other MK18 in its price range. The EAGLE™ joins the usual Delta Armory 6.03mm tightbore inner barrel and rotary HOP-up unit, providing competitive performance straight out of the box. 

If a full metal MK18 is on your shopping list and you have a thing for programmable controls, the DA-A07-EGL ALPHA™ MK18 MOD.1 M4/AR-15 AEG is the MK18 for you!

Whether you're a veteran skirmisher looking for a lightweight backup or a newcomer seeking superb bang for your buck, the Specna Arms SA-F04-RL FLEX™ HAL¹ ETU M4/AR-15 AEG should suit you perfectly! The SA-F04-RL follows Specna's FLEX™ build style, constructed predominantly from high-density polymer with an alloy outer barrel, resulting in a lightweight and agile build which won't have your arms burning after a gameday!

Inside, we are treated to a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, offering superb accuracy potential and improved air efficiency, giving you a slight FPS boost with the same strength spring. Also inside is the HAL¹ MOSFET, offering a range of programmable fire modes usually only present in platforms twice this price!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. That's one heck of a feature set for such a low-cost platform! If you're looking for a low-cost, lightweight primary but demand advanced internals, the Specna Arms SA-F04-RL FLEX™ HAL¹ ETU M4/AR-15 AEG is what you need!

Whether you're a veteran skirmisher looking for a lightweight backup or a newcomer seeking superb bang for your buck, the Specna Arms SA-F04-RL FLEX™ HAL¹ ETU M4/AR-15 AEG should suit you perfectly! The SA-F04-RL follows Specna's FLEX™ build style, constructed predominantly from high-density polymer with an alloy outer barrel, resulting in a lightweight and agile build which won't have your arms burning after a gameday!

Inside, we are treated to a 6.03mm tightbore inner barrel paired with a rotary HOP-up unit, offering superb accuracy potential and improved air efficiency, giving you a slight FPS boost with the same strength spring. Also inside is the HAL¹ MOSFET, offering a range of programmable fire modes usually only present in platforms twice this price!

The HAL¹ is ready to go toe to toe with other modern MOSFETs, allowing you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. That's one heck of a feature set for such a low-cost platform! If you're looking for a low-cost, lightweight primary but demand advanced internals, the Specna Arms SA-F04-RL FLEX™ HAL¹ ETU M4/AR-15 AEG is what you need!

If you love the looks of the DA-C05 Silent Ops but wish it was longer with more metal parts, the Delta Armory DA-B08 BRAVO™ 9" SilentOps M4/AR-15 AEG is just what you need! BRAVO™ AEGs are constructed with strong high-density polymer receivers and aluminium handguards, making them perfect for those who want to step a bit closer to realism while maintaining maximum energy and agility in game. 

The Silent Ops 9" is rocking a quad rail handguard styled after the KAC Freefloat RIS paired with a suppressor hidden beneath, giving it the stealthy styling of shorter suppressed ARs with enough length to hide a 400mm 6.03mm tightbore inner barrel inside for maximum long range effect. The tightbore is paired with a rotary HOP-up unit and a reinforced version 2 gearbox equipped with a quick change spring guide, 7mm ball bearing bushings and an SHS piston and tappet plate, resulting in a build focussed on reliability and strength with a slight accuracy advantage for good measure!

Whether you're looking for a DMR base gun or a long-barreled AR platform which won't weigh you down, the Delta Armory DA-B08 BRAVO™ 9" SilentOps M4/AR-15 AEG will suit your needs perfectly!

The Double Eagle M904H is a lightweight but extremely effective Airsoft Electric Gun, powered by a Battery in the Stock. It is based around the 'Falcon Fire Control System' which offers a highly programmable and incredibly well-responding Trigger. If you're a fan of staying light on your feet, flanking the enemy and generally causing mayhem, this Airsoft Gun will do you proud on the skirmish field.

This Airsoft Electric Gun is an M4 Platform replica made under license from Barrett, and offers the stunning Nautilus Gearbox in a robust and medium-length package which is happy to perform indoors and out.

This Airsoft Electric Gun is an M4 Platform replica made under license from Barrett, and offers the stunning Nautilus Gearbox in a robust and medium-length package which is happy to perform indoors and out.

If you're looking for an affordable long-range AR with a unique modern look, the DA-B12 BRAVO™ from Delta Armory is one to watch. This M4/AR-15 AEG is based on real steel LVOA-style AR-15s, boasting a 16.2-inch outer barrel and handguard along with an equally long 6.03mm tightbore inner barrel, ideal for outdoor skirmishing or a DMR build. 

Inside the DA-B12, we are treated to the same pre-upgraded internal parts as the other offerings in Delta's BRAVO™ line, including a rotary HOP-up unit, SHS tappet plate and piston, 7mm ball bearing bushings, a CNC Type A flat trigger and a reinforced V2 gearbox shell. 

The result is an AEG which shoots far better than one would expect for the price with full TM compatibility for the upgrade addicts. Whether you just wack a big scope on it and get to work or you build it out into a fully-fledged DMR, the DA-B12 makes a fantastic outdoors platform! 

If you're looking for a compact and lightweight AR platform with stealthy styling, the Specna Arms SA-FH06 FLEX™ HAL¹ ETU™ M4/AR-15 AEG is a great choice. This AEG follows Specna's "FLEX" build standard, with full polymer externals, plus, an alloy flash hider and outer barrel. It's ideal for skirmishers who like to move fast and keep their energy high all day.

The latest SA-FH06 is rocking Specna's HAL¹ ETU, boasting programmable fire controls and several quality-of-life functions built-in, all for barely more money than the original. The HAL¹ allows you to select binary trigger, AUG mode and sniper delay instead of semi-auto and semi-auto lock, 3-round burst or 5-round burst instead of full auto. Also available are 5 levels of trigger sensitivity adjustment, 6 levels of adjustable pre-cocking, active braking and a low battery voltage alarm. Like the original, the HAL¹ equipped version also has a 6.03mm tightbore inner barrel, giving it above-average accuracy potential and a slight rise in FPS from the same strength spring. Impressive considering its low price point!