Airsoft Holsters

If you are running a fully equipped pistol you may find it is getting a bit too heavy to use in a belt holster, and in this case Amomax have you covered! The Drop-Leg Adapter is compatible with any Amomax polymer retention holster and mounts through your belt, with an additional elasticated nylon strap to help prevent the pistol from swinging around during dynamic movement.

A lightweight Left Handed Drop Leg Pistol holster capable of carrying a wide variety of smaller sized Airsoft replica pistols, with an additional pouch for holding an extra magazine. 

A lightweight Left Handed Drop Leg Pistol holster capable of carrying a wide variety of smaller sized Airsoft replica pistols, with an additional pouch for holding an extra magazine. 

A Polymer constructed retention holster for TM/WE/KJW/KWA Hi-Capa series Gas Blowback Pistols, which will attach to a Belt or to MOLLE (using a separately sourced MOLLE adapter) and hold your pistol tight until you press the release button.

A 1000D Polyester constructed Universal Drop Leg Holster for Airsoft Pistols and Sidearms, including ones that have a Laser/Light Module installed. The Holster can be worn on your hip via a belt, or attached to a belt as a Drop Leg Holster via the included straps. The Holster claims it can fit any size of Pistol, but we would recommend medium sized ones, such as EU Series and 1911 Platform Pistols. The Holster is very simple to use, being shaped to your Pistol by opening it fully, inserting the Pistol, and closing the Velcro flaps around it.

A 1000D Polyester constructed Universal Drop Leg Holster for Airsoft Pistols and Sidearms, including ones that have a Laser/Light Module installed. The Holster can be worn on your hip via a belt, or attached to a belt as a Drop Leg Holster via the included straps. The Holster claims it can fit any size of Pistol, but we would recommend medium sized ones, such as EU Series and 1911 Platform Pistols. The Holster is very simple to use, being shaped to your Pistol by opening it fully, inserting the Pistol, and closing the Velcro flaps around it.

A 1000D Polyester constructed Universal Drop Leg Holster for Airsoft Pistols and Sidearms, including ones that have a Laser/Light Module installed. The Holster can be worn on your hip via a belt, or attached to a belt as a Drop Leg Holster via the included straps. The Holster claims it can fit any size of Pistol, but we would recommend medium sized ones, such as EU Series and 1911 Platform Pistols. The Holster is very simple to use, being shaped to your Pistol by opening it fully, inserting the Pistol, and closing the Velcro flaps around it.

A 1000D Polyester constructed Universal Drop Leg Holster for Airsoft Pistols and Sidearms, including ones that have a Laser/Light Module installed. The Holster can be worn on your hip via a belt, or attached to a belt as a Drop Leg Holster via the included straps. The Holster claims it can fit any size of Pistol, but we would recommend medium sized ones, such as EU Series and 1911 Platform Pistols. The Holster is very simple to use, being shaped to your Pistol by opening it fully, inserting the Pistol, and closing the Velcro flaps around it.

A 1000D Polyester constructed Universal Drop Leg Holster for Airsoft Pistols and Sidearms, including ones that have a Laser/Light Module installed. The Holster can be worn on your hip via a belt, or attached to a belt as a Drop Leg Holster via the included straps. The Holster claims it can fit any size of Pistol, but we would recommend medium sized ones, such as EU Series and 1911 Platform Pistols. The Holster is very simple to use, being shaped to your Pistol by opening it fully, inserting the Pistol, and closing the Velcro flaps around it.

A 1000D Polyester constructed Universal Drop Leg Holster for Airsoft Pistols and Sidearms, including ones that have a Laser/Light Module installed. The Holster can be worn on your hip via a belt, or attached to a belt as a Drop Leg Holster via the included straps. The Holster claims it can fit any size of Pistol, but we would recommend medium sized ones, such as EU Series and 1911 Platform Pistols. The Holster is very simple to use, being shaped to your Pistol by opening it fully, inserting the Pistol, and closing the Velcro flaps around it.

A Tactical retention style holster for your Desert Eagle! Have your hand cannon at the ready at all times with this dedicated Deagle holster!

A drop leg holster with additional magazine pouches and utility pouch, designed to hold a huge range of pistols, from standard size to large pistols like the MK23 and Desert Eagle. 

A drop leg holster with additional magazine pouches and utility pouch, designed to hold a huge range of pistols, from standard size to large pistols like the MK23 and Desert Eagle. 

A Shotgun Scabbard which can be either worn via a Shoulder Strap or attached to Rigs and Vets to provide a great way of carrying a Shotgun as a Secondary at an Airsoft Skirmish. The Scabbard is constructed from 600D Polyester, and features external MOLLE Loops.

A Shotgun Scabbard which can be either worn via a Shoulder Strap or attached to Rigs and Vets to provide a great way of carrying a Shotgun as a Secondary at an Airsoft Skirmish. The Scabbard is constructed from 600D Polyester, and features external MOLLE Loops.

A Shotgun Scabbard which can be either worn via a Shoulder Strap or attached to Rigs and Vets to provide a great way of carrying a Shotgun as a Secondary at an Airsoft Skirmish. The Scabbard is constructed from 600D Polyester, and features external MOLLE Loops.

A 1000D Polyester constructed Holster for MOLLE compatible systems, which mounts Horizontally rather than Vertical, allowing you to more comfortably mount it on a Chest Rig or other MOLLE Panel without obstructing your Pouches. It also results in a slicker draw for those who prefer this mounting style. A buckle-secured Thumb Strap wraps around your Pistol Grip to hold the contents of the Holster securely. This Holster will accept Small to Medium sized Pistols.

A 1000D Polyester constructed Holster for MOLLE compatible systems, which mounts Horizontally rather than Vertical, allowing you to more comfortably mount it on a Chest Rig or other MOLLE Panel without obstructing your Pouches. It also results in a slicker draw for those who prefer this mounting style. A buckle-secured Thumb Strap wraps around your Pistol Grip to hold the contents of the Holster securely. This Holster will accept Small to Medium sized Pistols.

A 1000D Polyester constructed Holster for MOLLE compatible systems, which mounts Horizontally rather than Vertical, allowing you to more comfortably mount it on a Chest Rig or other MOLLE Panel without obstructing your Pouches. It also results in a slicker draw for those who prefer this mounting style. A buckle-secured Thumb Strap wraps around your Pistol Grip to hold the contents of the Holster securely. This Holster will accept Small to Medium sized Pistols.

A 1000D Polyester constructed Holster for MOLLE compatible systems, which mounts Horizontally rather than Vertical, allowing you to more comfortably mount it on a Chest Rig or other MOLLE Panel without obstructing your Pouches. It also results in a slicker draw for those who prefer this mounting style. A buckle-secured Thumb Strap wraps around your Pistol Grip to hold the contents of the Holster securely. This Holster will accept Small to Medium sized Pistols.

Designed and built to work in conjunction with NUPROL's Perfect Fit Holster Range, allowing the attachment of Holsters to the platform in any configuration. 

A Universal Retention Holster that is constructed from a tough Polymer and features a Locking Retention Design that will hold your Pistol securely in place until you want to draw it. The Holster is hugely compatible with a large range of Airsoft Pistols, fitting and working with over eighty models of Gas Blowback Sidearms. If you own lots of Pistols and want one Holster to rule them all... then the Amomax Per-Fit Universal Holster (for 80+ Pistols) is exactly what you were looking for. This model of the Per-fit is for left-handed users and is designed to be mounted on the left hip of the user. 

Design to lock your primary weapon in a solid position prevent slapping against your legs or hips. This simple, lightweight yet highly durable weapon mount/holstering system can be installed within a couple of minutes with only one allen key. 

Design to lock your primary weapon in a solid position prevent slapping against your legs or hips. This simple, lightweight yet highly durable weapon mount/holstering system can be installed within a couple of minutes with only one allen key. 

A retention holster designed to fit and snugly hold EU-Series pistols with one neat trick up it's sleeve... It will happily accept a pistol with a torch or laser mounted on to it. Flashlight/laser users will know the pain of limited holsters being available, so it's great to combine the flexibility of a fabric holster with the convenience and tacticool features of a moulded retention holster.

A Double Magazine Retention Pouch designed for WE Europe Airsoft Pistol Standard Sized Magazines. The holsters are constructed from Durable Polymer and are designed to allow the user to gain access to their Magazine and draw them as quick as possible. 

If you are running an AEP and you want a polymer retention holster here is your opportunity! The CYMA Polymer Retention Holster is designed to fit the CM.126, CM.126S and CM.132S AEPs. This holster holds your pistol in place via a polymer tab which indexes with the trigger guard, keeping it nice and secure as you run and ready for a fast draw when you press the button on the outside.

The holster itself is supplied mounted to a polymer "paddle" mount which will fit any belt of up to 2" in width and mounts via a rotary interface, meaning it should be compatible with rotary interfaces on MOLLE holster mounts, shoulder harnesses and belt mounts of different styles and draw heights. The rotary interface allows you to set your preferred draw angle using the included Allen key by loosening the bolt in the rear of the mount, repositioning it and tightening the bolts back down, giving you many more options than a standard fabric universal holster. Finally, AEP users are no longer held back by a lack of modern holster options!

If you're running the super cool CYMA CM.136 Grach EBB as your sidearm, this is the place to stow it! The CYMA Retention Holster for CM.136 Grach EBB Pistols is specifically designed for the CYMA CM.136, meaning no worries with compatibility and a flawless fit. This is a retention level 2 holster, meaning it requires the external button to be pressed to draw the pistol which results in greater security than level 1 holsters, ideal for aggressive skirmishers who get stuck right in!

The holster comes pre-fitted with a "paddle" mount attached via the common 30mm toothed rotary interface. The paddle mount fits practically any belt, from wide tactical belts to regular civilian belts and the rotary interface allows you to adjust the draw angle to suit your playstyle and work around anything else you may have on your belt kit. 

A massive advantage of the rotary interface is the wide variety of different wear options it provides, from MOLLE mounts to shoulder harnesses and drop leg panels. No matter how you plan to run your CM.136 Grach EBB, the CYMA Retention Holster is good to go!

A Double Magazine Retention Pouch designed for WE Europe Airsoft 1911 Pistol Standard Sized Magazines. The holsters are constructed from Durable Polymer and are designed to allow the user to gain access to their Magazine and draw them as quick as possible.

Designed and built to work in tandem with Amomax's holster and pouch system, allowing the attachment of Holsters to the platform in any configuration, allowing you to bring your A-game to any skirmish customising, depending on the objectives.