Airsoft Helmets & Helmet Accessories

If your helmet keeps getting you spotted, add the Novritsch 3D Camo Cover for FAST High-cut Helmet! This helmet cover is designed specifically for FAST High-cut helmets and replicas, constructed from a mixture of ripstop fabric and UV-resistant polyester mesh. The cover includes laser-cut 3D leaves to help break up your outline and disguise the usual shiny finish of most Airsoft helmets. 

If you're going for maximum concealment, add Novritsch LC1 Leaf Camouflage for an even greater edge out in the woods. Available in the usual range of camo patterns along with Novritsch's unique Kreuzotter pattern, the 3D Camo Cover for FAST High-cut Helmet is exactly what the woodland warrior needs for a stealthy playstyle!

If you are shopping for Airsoft headwear but want to remain agile and unburdened, this helmet should fit the bill! The 8Fields Tactical MICH 2001 High Cut Helmet Replica; Ultra Light Version gives you the aggressive tactical styling of a ballistic helmet but is nice and light, tipping the scales at a minor 0.660 kg despite being kitted out with ARC accessory rails and an NVG mount bracket. 

This helmet replicates the real steel MICH 2001 High Cut helmet, allowing compatibility with communication headsets and improved airflow to the neck and sides of the head. Being a replica, this helmet is just for looks and doesn't provide any ballistic or impact protection, but is fully adjustable via an adjustable suspension and reconfigurable internal foam padding. If you need a helmet to complete your loadout but don't want to compromise your in game agility, the 8Fields Tactical MICH 2001 is a fine choice!

A lightweight LED Light Set suitable for providing close range Illumination or light for Airsoft. Constructed out of robust polymer and metal, this LED set is more than capable of taking bumps and knock during combat. 

A set of Adapters to attach your EARMOR Active Ear Protection Headsets to an M-TEK Flux Helmet Rail. If you own a pair of EARMOR Active Ear Defenders (such as the M32) and a M-TEK Flux Helmet, then this is the most efficient and comfortable way to combine the two. This method of mounting removes the needs for the large and cumbersome headband, making them far more pleasant to wear for a long skirmish.

If you are in the middle of a helmet build and it looks a little bare, consider the Accessory Pouch Gen.2 by FMA. This pouch is modelled after pouches used for NVG counter weights and battery packs, but can be put to whatever use you need on the skirmish field.

If you are in the middle of a helmet build and it looks a little bare, consider the Accessory Pouch Gen.2 by FMA. This pouch is modelled after pouches used for NVG counter weights and battery packs, but can be put to whatever use you need on the skirmish field.

If you like the looks of tactical helmets but not the weight, this should suit you! The 8Fields Tactical MICH 2002 Mid-Cut Helmet Replica; Ultra Light Version gives you all the looks but very little of the weight, tipping the scales at a minor 0.688 kg despite being kitted out with ARC accessory rails and an NVG mount bracket. 

This helmet replicates the real steel MICH 2002 Mid-cut helmet, allowing compatibility with communication headsets while maintaining decent ear protectivity. Being a replica, this helmet is just for looks and doesn't provide any ballistic or impact protection, but is fully adjustable via an adjustable suspension and reconfigurable internal foam padding. If you need a helmet to complete your loadout but don't want to compromise your in game agility, the 8Fields Tactical MICH 2002 is what you need!

If you like the looks of tactical helmets but not the weight, this should suit you! The 8Fields Tactical MICH 2002 Mid-Cut Helmet Replica; Ultra Light Version gives you all the looks but very little of the weight, tipping the scales at a minor 0.688 kg despite being kitted out with ARC accessory rails and an NVG mount bracket. 

This helmet replicates the real steel MICH 2002 Mid-cut helmet, allowing compatibility with communication headsets while maintaining decent ear protectivity. Being a replica, this helmet is just for looks and doesn't provide any ballistic or impact protection, but is fully adjustable via an adjustable suspension and reconfigurable internal foam padding. If you need a helmet to complete your loadout but don't want to compromise your in game agility, the 8Fields Tactical MICH 2002 is what you need!

If you have an FMA EX Ballistic style helmet and want to change up your rails for a different colour, here is your opportunity! These Helmet Rails from FMA are designed to fit EX type ballistic helmets, and include two goggle strap hooks, two Picatinny rails, bungee retention elastics and all the bolts you need to mount this to your lid. 

If you have an FMA EX Ballistic style helmet and want to change up your rails for a different colour, here is your opportunity! These Helmet Rails from FMA are designed to fit EX type ballistic helmets, and include two goggle strap hooks, two Picatinny rails, bungee retention elastics and all the bolts you need to mount this to your lid. 

If you have an FMA EX Ballistic style helmet and want to change up your rails for a different colour, here is your opportunity! These Helmet Rails from FMA are designed to fit EX type ballistic helmets, and include two goggle strap hooks, two Picatinny rails, bungee retention elastics and all the bolts you need to mount this to your lid. 

If you love the looks of FAST helmets but need extra airflow to keep your head cool and maintain focus, the FAST PJ Replica from FMA should suit you perfectly. This helmet replicates the real steel Para Jump/Carbon FAST helmet, featuring ARC accessory rails on each side and an NVG mount up front, complete with a protective insert. 

One of the best features of this helmet is its OCC adjustment dial, located on the rear of the suspension. The OCC dial provides perfect stability when cranked down, meaning if you have an action camera or other kit mounted to your lid it won't slide around on your head during dynamic movements. Whether you are looking for a summer alternative to a ballistic helmet replica or you want to reduce the chances of your goggles fogging, the FAST PJ Helmet Replica is the way to go! 

If you're looking for a stylish way to keep your head protected from BBs and minor bumps and scrapes the FMA FAST Maritime Helmet Replica will do just that. This helmet comes fully kitted out with ARC accessory rails on either side and an NVG mount up front, allowing you to tart it up however you like. To keep this lid stable on your noggin, a fine replica of the FAST OCC dial is present on the rear of the suspension, allowing you to tighten down the helmet for a wobble-free fit.

The NVG mount allows night vision devices or action cameras to be mounted using the appropriate hardware, and the side rails allow for ear protectors, masks and 20mm rail adapters to be added, meaning you can mount a scope to your head if that's the way you roll! This helmet is sized at L/XL and should fit head circumferences between 58 and 62cm approximately.

If you're looking for a stylish way to keep your head protected from BBs and minor bumps and scrapes the FMA FAST Maritime Helmet Replica will do just that. This helmet comes fully kitted out with ARC accessory rails on either side and an NVG mount up front, allowing you to tart it up however you like. To keep this lid stable on your noggin, a fine replica of the FAST OCC dial is present on the rear of the suspension, allowing you to tighten down the helmet for a wobble-free fit.

The NVG mount allows night vision devices or action cameras to be mounted using the appropriate hardware, and the side rails allow for ear protectors, masks and 20mm rail adapters to be added, meaning you can mount a scope to your head if that's the way you roll! This helmet is sized at L/XL and should fit head circumferences between 58 and 62cm approximately.

A set of Polymer Goggle retainers which will secure a set of goggles to your helmet, provided you have a set of FAST-style rails on your lid and your goggle strap is no wider than 36mm.

A set of Polymer Goggle retainers which will secure a set of goggles to your helmet, provided you have a set of FAST-style rails on your lid and your goggle strap is no wider than 36mm.

A tough lower face Mandible for Fast Helmets which will protect your smile and make your helmet set up look absolutely boss, without compromising your ability to breathe.

If you are looking for a helmet but want to remain light on your feet, the FMA FAST BJ Helmet Replica is definitely worth a look. This helmet is styled after the Base Jump/Bump FAST helmet and features a built-in NVG mount at the front, ARC rails on either side and a ported shell to improve airflow and comfort along with reducing the chances of goggles fogging. 

Also featured in this helmet is the game-changing OCC adjustment dial, designed to keep the helmet super snug and stable on your head no matter what you have mounted or how hard you sprint. If you're planning on running a GoPro or other action camera to record your Airsoft escapades, this is one of the most stable platforms you can mount it to!

If you like to keep pace with the latest innovations in the real steel world, this belongs on your head! The IHPS Combat Helmet is the US Army's latest issue brain bucket, rocking an innovative boltless suspension design, accessory rails and an NVG mount bracket up front. FMA's replica matches the look and can be kitted out like the real thing, but will only protect you from BBs, not incoming rounds, shrapnel or bricks! 

The set includes the helmet itself, a helmet cover in the same colour as the helmet shell, a set of user-configurable internal foam pads and external velcro panels so you can add patches to customise your lid. The helmet cover is a specific design for the IHPS and includes counterweight straps and the rear and velcro on the top, rear and sides. If you like to lead the pack when it comes to the latest replica kit, the IHPS helmet should suit you well!

A lightweight cover for FAST helmets, allowing you to quickly and easily change the camo pattern of your helmet with minimal effort.

A fabric helmet cover, designed to be used to cover MICH 2000 helmets and change their appearance as quickly and as easily as possible.

If you're looking for a stylish tactical helmet but want to separate yourself from the FAST-wearing masses, the Next Generation Spec-Ops Ballistic Helmet Replica is the unique lid you've been looking for! This helmet is a great replica of one of the most modern, up-and-coming ballistic helmets, known in the real steel world as the "Caiman Ballistic Helmet". Naturally, this helmet does not provide any ballistic protection but it will make you look utterly slick in game! 

Furnished with an NVG mount up front and skeletonised ARC rails on each side, the Next-Gen Ballistic Helmet is more than a match for FAST, Airframe and MICH helmets, with a uniquely modern style to mark it out from the rest. Inside, we are treated to an OCC-style rotary adjustment dial which keeps the helmet stable on your head regardless of whether you mount an action camera to the front or navigation lights to the sides. If you want to set yourself apart from the crowd and run one of the latest and greatest real steel helmet designs in replica form, here you go!

A set of Velcro-backed, soft foam pads for placing inside helmets, to ensure that the position of your helmet is both correct and comfortable. They pads can be used in combination with an existing set of pads, or can be used to replace old and missing pads. 

If it's finally time for you to get some comms going and you want to rock the best, this bundle is here to help you out! Containing one of the best helmets and best headsets available on the market, equipping this setup will send the message that you know what you're doing.

A set of Velcro-backed, soft foam pads for placing inside helmets, to ensure that the position of your helmet is both correct and comfortable. They pads can be used in combination with an existing set of pads, or can be used to replace old and missing pads. 

If you have a nice helmet with an NVG mounting bracket we bet you are looking for ways to style it up and have it look a bit less "Airsoft". A great way to give your helmet a touch of realism is by adding a Rhino NVG arm, adding a military look to your lid and filling that empty mounting bracket on the front! 

If you're running a GoPro or other action camera on your FAST High-cut, add the Novritsch Helmet Pouch for FAST High-cut Helmets to store your power bank! This helmet pouch is designed primarily for counterweights to balance your lid when NVGs are mounted or power banks so you can keep your footage rolling all day long.

The pouch itself is constructed from a combination of Nylon and PVC, including elastic loops which are ideal for accessory batteries or chem-lights. Velcro is present along the top of your helmet when installed, allowing you to customise it with I.D and Morale patches. While it is designed specifically for the Novritsch Tactical Helmet, this helmet pouch should also fit most FAST High-cut helmet clones. The Novritsch Helmet Pouch for FAST High-cut Helmets adds a side of style to your helmet with loads of functional benefits!

If you want to give your lid a new look, the PTS Syndicate Velcro Kit for MTEK FLUX Helmet lets you do just that! Designed for the PTS MTEK FLUX but compatible with most other Airsoft helmets, this velcro kit is easy to install thanks to its self-adhesive backing. This kit is available in two variants, interior and exterior.

The exterior version mounts to the outside of your helmet and allows you to kit your brain bucket out with morale and I.D. patches and other velcro-mounted accessories. The interior version makes a great replacement for worn-out interior velcro and can be a great way to rearrange your helmet's interior padding for a more comfortable fit.

If you want to give your lid a new look, the PTS Syndicate Velcro Kit for MTEK FLUX Helmet lets you do just that! Designed for the PTS MTEK FLUX but compatible with most other Airsoft helmets, this velcro kit is easy to install thanks to its self-adhesive backing. This kit is available in two variants, interior and exterior.

The exterior version mounts to the outside of your helmet and allows you to kit your brain bucket out with morale and I.D. patches and other velcro-mounted accessories. The interior version makes a great replacement for worn-out interior velcro and can be a great way to rearrange your helmet's interior padding for a more comfortable fit.

If you want to give your lid a new look, the PTS Syndicate Velcro Kit for MTEK FLUX Helmet lets you do just that! Designed for the PTS MTEK FLUX but compatible with most other Airsoft helmets, this velcro kit is easy to install thanks to its self-adhesive backing. This kit is available in two variants, interior and exterior.

The exterior version mounts to the outside of your helmet and allows you to kit your brain bucket out with morale and I.D. patches and other velcro-mounted accessories. The interior version makes a great replacement for worn-out interior velcro and can be a great way to rearrange your helmet's interior padding for a more comfortable fit.