Airsoft Guns Above £300

If you've been umming and ahhing about a GBBR but the technical aspects put you off, the G&G MGCR 556 GBB Rifle should give you what you need! This superbly designed gas blowback rifle works just like the real thing when it comes to handling and manipulation but is considerately designed on the inside to ensure it outlasts rival platforms, both in its lifespan and in its cold weather performance.

Externally, the MGCR is a unique design from G&G based on the M4/AR-15 shape but considerably enhanced with a weight-reduced receiver, enlarged ambidextrous controls and a lightweight M-LOK handguard for all your mission essential accessories. The stock depends on which length variant you choose, but all are equipped with internal storage compartments for snacks or batteries and QD sling sockets on either side. Make no mistake, from an external design standpoint, this AR is at the cutting edge!

Inside, we are treated to internals we will probably never need to touch, including an ultra-light aluminium bolt carrier tipping the scales at a mere 108g with the nozzle, a built-in buffer system disguised as a gas piston to reduce wear from the bolt carrier impacting the HOP-up unit and full steel trigger components, including the trigger, sear, hammer, disconnector and valve knocker, with a steel bolt catch thrown in for good measure. Experienced GBBR users will know, when it comes to essential steel GBBR internals, the MGCR ticks all the boxes!

If you've been umming and ahhing about a GBBR but the technical aspects put you off, the G&G MGCR 556 GBB Rifle should give you what you need! This superbly designed gas blowback rifle works just like the real thing when it comes to handling and manipulation but is considerately designed on the inside to ensure it outlasts rival platforms, both in its lifespan and in its cold weather performance.

Externally, the MGCR is a unique design from G&G based on the M4/AR-15 shape but considerably enhanced with a weight-reduced receiver, enlarged ambidextrous controls and a lightweight M-LOK handguard for all your mission essential accessories. The stock depends on which length variant you choose, but all are equipped with internal storage compartments for snacks or batteries and QD sling sockets on either side. Make no mistake, from an external design standpoint, this AR is at the cutting edge!

Inside, we are treated to internals we will probably never need to touch, including an ultra-light aluminium bolt carrier tipping the scales at a mere 108g with the nozzle, a built-in buffer system disguised as a gas piston to reduce wear from the bolt carrier impacting the HOP-up unit and full steel trigger components, including the trigger, sear, hammer, disconnector and valve knocker, with a steel bolt catch thrown in for good measure. Experienced GBBR users will know, when it comes to essential steel GBBR internals, the MGCR ticks all the boxes!

Think AK, but bigger! The RPK is everything you love about the iconic AK, except it has been supersized. The CYMA CM.052 RPK-74 AEG is a faithful replica of the Russian support rifle. This AEG looks brilliant and shoots just as wonderfully, this is something that can be observed in all of CYMA's full metal AK platforms.

The CM.052 sports highly realistic construction with a plethora of steel parts, a full-sized dummy bolt carrier, a steel bipod and authentic real wood furniture matching the iconic rifle that was issued to Russian armed forces. The RPK-74 takes standard AK47/74 AEG magazines, including drum mags, and comes with an extended 45-round style high cap magazine which holds a stupendous 750 BBs!

If you are a real Dragunov fan, nothing beats steel and real wood! The CYMA CM.057 is widely known to be the best replica of the iconic Dragunov SVD DMR rifle and this version has gorgeous real wood furniture which is a fantastic match for the plywood which adorned the original SVD when it was first issued. The CM.057 boasts full metal construction with a large proportion of steel in its build, giving it a reasonable and realistic weight without making this Dragonov a drag (hehe) to carry around all day!

This AEG is based on the Real Sword SVD design which means it is already locked to semi auto and uses a custom gearbox design with an advanced gear adjustable TDC HOP-up unit. This superb internal design pairs perfectly with the super long 690mm inner barrel to make the SVD a great base platform for a DMR build. If you are after a long-range platform and want something with hints of modernity combined with the retro looks of real wood, the CM.057 should be at the top of your list!

King Arms have a new offering for the PDW crowd, the SBR SD, which is a modern 9mm compact with a railed handguard, ergonomic controls and included suppressor.

An Airsoft 6mm BB Gun, based on the AR Platform of Rifles, with a unique Hand guard and Stock System to make it stand out from the crowd. 

The A&K M60 is an exact replica of its real steel counterpart, the name M60 'Vietnam' arises from its iconic use during the Vietnam conflict were it served as the U.S. Army's primary SAW (squad support weapon), and continued to do so until the US adopted the FN MAG / M240 in the 1980s. 

If you have been eyeing up an ARCTURUS AK-12 but haven't yet taken the plunge, the AK-12 with AK-19 stock will make you glad you waited! This updated version of the AK-12 is styled after the latest AK-12 variants offered to civilian shooters, with improved ergonomics thanks to the new AK-19 stock and enhanced pistol grip. As with the previous ARCTURUS AK-12, this AEG is made almost entirely from steel, with a gorgeous stamped steel receiver and top cover and only the muzzle brake being alloy. On the outside, the AK-12 is slicker than ever before!

When it comes to internals, this variant of the AK-12 is equipped with an in-line MOSFET to improve trigger response and rate of fire and extend the life of the microswitch trigger by improving electrical efficiency. The gearbox is pre-upgraded with components focused on reducing friction, including a ball bearing quick change spring guide, ball bearing piston head, steel gears mounted on 8mm bushings and a ball bearing pinion gear to allow the high torque motor to spin more freely at high speeds. The inner barrel is a 6.01mm tightbore constructed from steel for maximum rigidity, and the ARCTURUS AK rotary HOP-up unit is also present, giving you the most modern innovation in AK HOP-ups with easier-to-apply adjustments and superb air seal.

Whether you are fixed on an AK-12 or you are checking out the AK platform options, the ARCTURUS AK-12 with AK-19 stock would make a fantastic, up-to-date primary for any modern Russian military or PMC loadout!

Following in the footsteps of the Krytac Kriss Vector Alpine Edition we are proud to introduce the Krytac EMG P90; Alpine Special Edition. This unique P90 variant has an eye-catching new look and brings plenty of modern functionality to the table as a bonus thanks to its redesigned modular upper receiver/optics bridge assembly. As with the original Krytac P90, this variant boasts full licencing from FN Herstal via Cybergun, but unlike the original, this P90 takes a walk on the wild side when it comes to external design!

Inside we are treated to the best the P90 platform has to offer, just like the previous P90 from Krytac. The trigger has been enhanced and now has a super short trigger travel with full adjustability, the upgraded internals are kept in check by the Krytac Nautilus MOSFET and a 30K RPM high torque motor delivers the power needed to provide a super snappy trigger response and a remarkable rate of fire. If you like your P90s minty fresh on the outside and a cold killer on the inside, this one should suit you!

If you are looking for a skirmish-oriented primary which gives you all you need to cut through the hoards, the Wildhog has your name on it! The G&G CM16 Wildhog is the G&G Combat Machine reinvented with the superb G&G G2 gearbox and a programmable ETU which allows for burst mode, all housed in G&Gs rock solid polymer receiver with an updated shape and design to give it a slick, modern style. If you seek something robust with above-average performance and some slick advanced features, the Wildhog is the one!

If CQB is your poison, you are going to love this one! The CM.106A AR-9 from CYMA adds to the increasingly wide range of AR-9 platforms available, making the decision on which platform to go for that much harder! The CM.106A sports full metal construction, a pre-installed electronic trigger unit with MOSFET, a high-speed motor, and internals which have been upgraded even beyond the already impressive "Platinum" internal setup.

If you're into the Noveske aesthetic but want something a bit longer than the N4 Gen.3 Shorty, check out the Noveske 13.7" Gen.3 INFIDEL AEG from EMG! This carbine-length AR platform is a perfect replica of the real steel Noveske Infidel Gen.3, a cutting-edge modern rifle at the pinnacle of the real steel AR tier list.

On the outside, we are treated to a full metal build with flawlessly engraved Noveske trademarks, a detailed replica of the Noveske KX3 Firepig flash suppressor, NSR 9" M-LOK handguard and "Super Badass" charging handle and the iconic Noveske silver outer barrel to add a hint of contrast to this high-end AR build.

Internally, the INFIDEL is equipped with the legendary CYMA Platinum E-Edition gearbox, complete with a pre-installed MOSFET, 13:1 ratio high-speed CNC gears, a high-speed motor and a quick change spring system for easy power tuning. The inner barrel is a 6.02mm tightbore paired with an alloy rotary HOP-up unit, leaving you with little left to do in terms of upgrades and a platform that is both laserbeam accurate and minigun fast!

If you're into the Noveske aesthetic but want something a bit longer than the N4 Gen.3 Shorty, check out the Noveske 13.7" Gen.3 INFIDEL AEG from EMG! This carbine-length AR platform is a perfect replica of the real steel Noveske Infidel Gen.3, a cutting-edge modern rifle at the pinnacle of the real steel AR tier list.

On the outside, we are treated to a full metal build with flawlessly engraved Noveske trademarks, a detailed replica of the Noveske KX3 Firepig flash suppressor, NSR 9" M-LOK handguard and "Super Badass" charging handle and the iconic Noveske silver outer barrel to add a hint of contrast to this high-end AR build.

Internally, the INFIDEL is equipped with the legendary CYMA Platinum E-Edition gearbox, complete with a pre-installed MOSFET, 13:1 ratio high-speed CNC gears, a high-speed motor and a quick change spring system for easy power tuning. The inner barrel is a 6.02mm tightbore paired with an alloy rotary HOP-up unit, leaving you with little left to do in terms of upgrades and a platform that is both laserbeam accurate and minigun fast!

Lee Enfield fans, here is another one to add to the collection! The Ares Lee Enfield Rifle No.4 MK.I* is constructed entirely from metal and real wood, just like the real thing, and has a phenomenal amount of attention to detail paid in its construction. This Lee Enfield is a near-perfect replica of the simplified mid-war No.4 variant, the Rifle No.4 MK.I* which was supplied en mass to British, Canadian and other allied troops through the latter years of WWII. 

Most of the metal parts are stainless steel, granting strength and realistic weight and heft, and the wood finish on the stock is gorgeous, looking slightly nicer than a real No.4 MK.I* with its deep woodgrain and consistent finish. Whether you want a Lee Enfield for WWII reenactment, skirmishing, or you simply want a wall hanger as a centrepiece for your man cave, the Ares Lee Enfield Rifle No.4 MK.I* is a must have for Lee Enfield fans!

An Airsoft 6mm BB AEG Light Machine Gun, designed for a Support Role, and is based on the Russian Built RPK-74. The weapon features a real wood Stock and Handguard, with a full Alloy Body and Internals, with a Polymer Pistol Grip and Imitation Bakelite Magazine. 

The CM.097A Platinum edition provides a complete, high-end AEG out of the box. With pre-upgraded features such as a Micro-switch trigger, MOSFET, and quick change spring system built into the premium gearbox the Cm.097A Platinum edition offers incredible performance and a package that is half the price of its rivals.

If you’ve seen our videos from IWA and the G&G World Cup you must be lusting after this thing as much as we are! Introducing the G&G Armament ESG-B10 Gas Shotgun, the spiritual successor to the ill-fated FLAK-12 design, a semi-automatic gas-powered shotgun offering the choice between a punishing 5 BBs per trigger pull and a positively evil 10 BBs!

The ESG-B10 is constructed with a CNC Aluminium upper receiver and a superb quality high-density polymer lower, as G&G is known for, and takes standard M4/AR-15 AEG magazines, meaning spares are ever available. Bristling with M-LOK slots on each side and the bottom with a generously long 20mm Picatinny top rail, the ESG-B10 is ready to be kitted out with accessories despite the unique nature of its design.

If you play CQB and need something to take on those drum-mag rocking HPA tri-shot speed-softers, the G&G ESG-B10 will give them a run for their money!

If you are looking for a CQB primary with an out-of-the-box custom look the ARCTURUS AK74U Tactical Sub Carbine AEG would be a fine choice and is a welcome breath of fresh air amidst the noxious cloud of standard AKS-74U AEG rifles on skirmish fields today. This AK74U rifle is around the same length as a standard AKS-74U but uses an RPK-style reinforced AK receiver and trunnion block setup, giving you something you simply cannot build yourself starting with an AKS-74U.

On the inside, this AK is outfitted similarly to other ARCTURUS offerings, with a well built gearbox boasting a range of reinforced low friction components, a 6.01mm steel tightbore inner barrel and a microswitch trigger to provide a snappy response and replace the conventional trigger contacts which are a known weakness of AEG gearboxes. With majority steel construction, plenty of accessory options and some choice modern ergonomic enhancements this AK is hard to beat when things get up close and personal!

In the real steel world, the 10/22 rifle platform is probably the last weapon anyone would choose to take into combat, but in the Airsoft world, you would be hard-pressed to find a more practical GBBR than the Novritsch SSQ22! This modernised Ruger 10/22 style replica puts performance first while providing the exciting blowback and realistic mag capacity GBBR enjoyers will appreciate.

On the outside, Novritsch has been up to his usual tricks, decking the SSQ22 out with an M-LOK handguard, lengthened 20mm Picatinny receiver rail and the up-and-coming 1913/20mm Picatinny stock mounting interface featured on the Sig MPX and MCX, amongst others. On the inside, the heart of the SSQ22's setup is its Maple Leaf flat HOP-up rubber which helps stabilise the BB in flight and ensures it enters the barrel precisely centred for more consistent shots down range. If you are thinking about giving the DMR playstyle a go but don't fancy running a 5KG SR25 setup the SSQ22 is the lightweight DMR platform you have been waiting for!

The Arcturus AK-12 is a replica of the legendary AK-12, an updated revisit of the AK Platform in an attempt to bring it into the modern day. This replica is built to a stunning standard using majoritively Steel for the externals, with handy features like a Quick Change Spring and Microswitch Trigger.

UMAREX presents one of the most iconic firearms of the modern age, the Heckler & Koch HK416. This is a gas blowback 1:1 Airsoft replica of one of the most iconic weapon platforms of all time. Fully licensed with full metal construction that comes complete with all of H&Ks trademarks and features, ready to skirmish at the highest level with incredibly satisfying gas blowback and recoil in both semi and full auto.

This new model is the gen 3 variant, which features up-to-date internal revisions including system stability and upgraded firing pin, hammer system, parts of the lower receiver and ease of HOP use for a second to none combat experience and reliable gas platform.

A well built and well thought out Airsoft Electric replica of the AR-10 platform, which offers tough construction and a wealth of top-tier features such as a Quick Change Spring, Microswitch Trigger, MOSFET and other high-quality internals to make this perfect for beginners and experts alike.

A compact version of an instantly recognisable classic; the M60E4 "Pig". This tactical variant of the LMG was designed to bring hard-hitting firepower to battlefields where a large unwieldy Support Weapon would be impractical. As you would imagine, it's built like a tank and has excellent quality of life features such as an electronic trigger and rate of fire adjuster.

If you seek the immersive firing experience and challenging playstyle of a GBBR, the EMG CGS Daniel Defense DDM4® PDW SBR GBBR is worthy of your attention! This compact full metal PDW style AR boasts official licensing from Daniel Defense and full DD trademarks across the design, with awesome replicas of DD's latest furniture and controls.

Inside, the DDM4 PDW GBBR is based on the Tokyo Marui ZET system, the best of the best when it comes to GBBR internal design. CGS has added a steel bolt carrier, steel trigger parts and a short stroked buffer into the mix, meaning enhanced strength in all the key areas and an absolutely killer rate of fire, especially compared with other GBBRs.

If you plan to use a GBBR in CQB skirmishes, this is probably the best option out there right now without spending thousands and building it yourself. Licenced trademarks, a full metal build packed with steel internal parts with a 6.03mm tightbore to top it off, you won't find another out-of-the-box GBBR with a full-size rifle style bolt as fast as this!

If you seek the immersive firing experience and challenging playstyle of a GBBR, the EMG CGS Daniel Defense DDM4® PDW SBR GBBR is worthy of your attention! This compact full metal PDW style AR boasts official licensing from Daniel Defense and full DD trademarks across the design, with awesome replicas of DD's latest furniture and controls.

Inside, the DDM4 PDW GBBR is based on the Tokyo Marui ZET system, the best of the best when it comes to GBBR internal design. CGS has added a steel bolt carrier, steel trigger parts and a short stroked buffer into the mix, meaning enhanced strength in all the key areas and an absolutely killer rate of fire, especially compared with other GBBRs.

If you plan to use a GBBR in CQB skirmishes, this is probably the best option out there right now without spending thousands and building it yourself. Licenced trademarks, a full metal build packed with steel internal parts with a 6.03mm tightbore to top it off, you won't find another out-of-the-box GBBR with a full-size rifle style bolt as fast as this!

If size matters to you, the ST200 will be right up your street! This absolutely massive Sniper Rifle replica is patterned after the real steel Cheytac M-200 Intervention rifle chambered in the whopping .408 CheyTac cartridge, offering better accuracy and range than even the Barrett M82! This rifle has a special place in all our hearts thanks to its starring role in the movie Shooter(2007), alongside Mark Wahlberg.

The S&T replica is constructed almost entirely from CNC-machined aluminium with the trim parts being steel and the ergonomic "Target" grip made from high density polymer. Amongst the ST200's tricks are the ability to be quickly disassembled, compatibility with AEG standard upgrade springs, inner barrels and HOP-up buckings and rocking an integral Bipod and Monopod, allowing this hefty beast to be supported properly for improved accuracy and stability.

Make no mistake, this rifle is absolutely huge and very, very heavy; tipping the scales at a massive 7KG unloaded and without a scope, and measuring in at 1.4 meters fully deployed. You have to be a special kind of Airsofter to run one of these in a skirmish, but if you have what it takes, here is your chance!

If size matters to you, the ST200 will be right up your street! This absolutely massive Sniper Rifle replica is patterned after the real steel Cheytac M-200 Intervention rifle chambered in the whopping .408 CheyTac cartridge, offering better accuracy and range than even the Barrett M82! This rifle has a special place in all our hearts thanks to its starring role in the movie Shooter(2007), alongside Mark Wahlberg.

The S&T replica is constructed almost entirely from CNC-machined aluminium with the trim parts being steel and the ergonomic "Target" grip made from high density polymer. Amongst the ST200's tricks are the ability to be quickly disassembled, compatibility with AEG standard upgrade springs, inner barrels and HOP-up buckings and rocking an integral Bipod and Monopod, allowing this hefty beast to be supported properly for improved accuracy and stability.

Make no mistake, this rifle is absolutely huge and very, very heavy; tipping the scales at a massive 7KG unloaded and without a scope, and measuring in at 1.4 meters fully deployed. You have to be a special kind of Airsofter to run one of these in a skirmish, but if you have what it takes, here is your chance!

Easily one of the most iconic sniper rifles to grace the field, now in a more compact 'short' size. With hefty full metal construction the EMG Barrett M82A1 is officially licenced by Barrett Firearms and has immaculately CNC engraved trademarks as we would expect from a rifle of this quality.

This version of the Barrett clocks in at a beastly 5.8KG, even at its somewhat shorter size, but if you like a challenge you have a rotary adjustable HOP-up unit at your disposal and 300FPS straight out of the box, with this variant being an AEG that does full auto! Meaning you can wield the .50 cal like a DMR and put those other snipers and marksmen firmly in their place!

If you are into the big boy style of 7.62x51, the EC-202 should suit you! This full metal AEG is based on a well known platform we all love the look of, and is packing more than its fair share of pre-upgraded internals so the look matches the performance. On the outside, we are treated to 20mm Picatinny rails wherever they are needed, a low-profile snag reducing stock with 6 positions of adjustment and a full complement of ambidextrous controls, making this a great platform for left or right-handed shooters. 

Internally, the EC-202 is kitted out with a 6.04mm tightbore inner barrel, rotary HOP-up unit, steel gears, a reinforced V2 long gearbox and an In-Line MOSFET to keep the electrical efficiency high for a fast trigger response and above average rate of fire. If you have plenty of normal assault rifles and your collection is lacking 7.62x51mm replicas, the EC-202 would be an asset to your arsenal!

If you're seeking an SA80 to complete your Squaddie kit, the WE L85A2 SA80 Replica GBBR is as realistic as they come! This full metal gas blowback rifle is constructed predominantly from stamped steel with an alloy outer barrel and olive green polymer furniture; a fantastic match for the real steel L85A2 as it was originally issued to the British Army.

Whether you're getting involved in Milsim skirmishes or want a realistic platform for training, movie making or display, the WE L85A2 is the one to go for. It kicks like a mule, operates almost exactly like the real thing and is made with the same proportions of metal to polymer as the real deal.

Compatibility-wise, the L85A2 takes WE Open Bolt M4/AR-15 magazines and VSR/GBB type inner barrels and HOP-up rubbers, meaning mags are common and a reliable design and you have access to some of the best aftermarket barrel and HOP-up bucking combos so you can maximise your accuracy and range potential. If you like to challenge yourself in game with 30-round mags, shoulder-thumping recoil and a realistic manual of arms, the WE L85A2 SA80 Replica GBBR is the way to go!