Airsoft Foregrips

A Polymer constructed Angled Foregrip for 20mm Rail Systems, which provides a comfortable point to achieve a strong grip over your Airsoft Gun.

A low profile ergonomic & stippled grip constructed from Polymer for attaching to Airsoft 20mm RIS rail systems.

If you prefer the tried and tested vertical foregrip over other gripping options but want something a little more modern than the average VFG, the Specna Arms Angled Vertical Foregrip may be just what you have been looking for! This grip can be attached to any 20mm Picatinny rail surface and features a slightly swept-back angle, intended to encourage a more comfortable wrist position whilst still making use of the advantages of a traditional vertical foregrip.

If you're searching for a modern vertical foregrip with slick styling and flawless handling, the Delta Armory B5 Vertical Foregrip for 20mm Picatinny Rails is ideal. This vertical grip is available in two styles; short for those who like to use the "C-clamp" or thumb-over-bore grip and long for more traditional vertical grip holds. Each style includes grippy crackle texture on each side and linear serrations on the front, giving you ample traction without becoming uncomfortable without gloves.

The B5 mounts to 20mm Picatinny rails via its steel mounting apparatus and also includes a storage compartment inside, ideal for tactical snacks to keep energy high or accessory batteries for long-duration operations. If you want more control over your primary when sweeping rapidly between targets, the Delta Armory B5 Vertical Foregrip for 20mm Picatinny Rails will do the trick!

If you're searching for a modern vertical foregrip with slick styling and flawless handling, the Delta Armory B5 Vertical Foregrip for 20mm Picatinny Rails is ideal. This vertical grip is available in two styles; short for those who like to use the "C-clamp" or thumb-over-bore grip and long for more traditional vertical grip holds. Each style includes grippy crackle texture on each side and linear serrations on the front, giving you ample traction without becoming uncomfortable without gloves.

The B5 mounts to 20mm Picatinny rails via its steel mounting apparatus and also includes a storage compartment inside, ideal for tactical snacks to keep energy high or accessory batteries for long-duration operations. If you want more control over your primary when sweeping rapidly between targets, the Delta Armory B5 Vertical Foregrip for 20mm Picatinny Rails will do the trick!

For those of you looking for a sturdier grip and improved range this vertical foregrip allows you to keep a low profile with a longer weapon at range or tougher grip when running and gunning during CQB.

For those of you looking for a sturdier grip and improved range this vertical foregrip allows you to keep a low profile with a longer weapon at range or tougher grip when running and gunning during CQB.

A very easy to use fore grip that can be locked in a compact or full vertical position depending on your situation and requirements. 

A slight angled fore grip designed to stiffen up your grip and aid in improved accuracy down range. A must for anyone wishing to keep a low profile and slick look but gain a tactical advantage on a longer weapon or super CQB package.

A tough Polymer foregrip for M-LOK rail systems, is ridged to provide good grip, comes supplied with everything you need to attach it, and provides a more stable platform for manipulating your replica.

Constructed by HERA Arms themselves, this foregrip is part of the CQR rifle system but comes as a stand-alone unit and can be attached as an aftermarket part to any rifle with a lower 20mm RIS / RAS Rail. If you just want the ergonomics of the foregrip, but not the stock, then this is for you.

If you are looking for a grip that also converts into a bipod but looking for weight and solid construction then this is for you. 

If you need a handling upgrade for your 20mm Picatinny rail-equipped platform, this will do the trick! The FMA QD Stubby Vertical Foregrip; 20mm Picatinny is constructed from high density polymer with alloy and steel mounting hardware and is a stubby VFG ideally used for thumb-over-bore holds but still useable with the traditional vertical grip hold.

Inside the grip, we are treated to a small storage compartment which can be accessed by unscrewing the base of the grip. The compartment is designed to hold CR123a batteries for your accessories but could also be used to carry sweets, gum or other in-game morale boosters. The grip mounts to 20mm Picatinny rails via its Quick Detach throw-lever mount, meaning it is easy to install and can be moved around in seconds. If you like to use the old vertical grip hold but are curious about modern thumb-over-bore techniques, this is the ideal grip to expand your horizons!

If you need a handling upgrade for your 20mm Picatinny rail-equipped platform, this will do the trick! The FMA QD Stubby Vertical Foregrip; 20mm Picatinny is constructed from high density polymer with alloy and steel mounting hardware and is a stubby VFG ideally used for thumb-over-bore holds but still useable with the traditional vertical grip hold.

Inside the grip, we are treated to a small storage compartment which can be accessed by unscrewing the base of the grip. The compartment is designed to hold CR123a batteries for your accessories but could also be used to carry sweets, gum or other in-game morale boosters. The grip mounts to 20mm Picatinny rails via its Quick Detach throw-lever mount, meaning it is easy to install and can be moved around in seconds. If you like to use the old vertical grip hold but are curious about modern thumb-over-bore techniques, this is the ideal grip to expand your horizons!

If you've only got pocket change but want a vertical grip, the Delta Armory Vertical Foregrip for 20mm Picatinny Rails is ideal. This ultra-affordable vertical foregrip is styled after the real steel KAC VFG, the iconic design used on US Army M4A1 rifles and G36K platforms used by German KSK. This VFG mounts to any 20mm Picatinny rail and is very easy to mount, requiring not a single tool! 

To mount the grip, unscrew the base, slide it onto your rail, align the hole in the side of the grip with a notch on your rail and tighten the base back down, securing the grip in place. If you're looking for a cost-effective ergonomic enhancement for your 20mm Picatinny rail-equipped platform, the Delta Armory Vertical Foregrip for 20mm Picatinny Rails is the one to go for!

If you're ergonomic accessories for your M-LOK handguard, the Airsoft Artisan M-LOK Stubby Vertical Foregrip is both stylish and comfy! This vertical foregrip is the stubby variety, designed for use with the "C-Clamp" aka thumb-over-bore grip, functioning as both a hand stop and VFG all in one. 

The grip itself is made from high-density polymer and the M-LOK screw and nut from steel, giving you minuscule added weight with the assurance the grip will never come off in your hand. The front and rear include crackle textured panels for improved wet weather gripping qualities and the shape of the grip itself is surprisingly comfortable, bowing inwards in the centre and flaring out towards the tip, filling out the hand perfectly. 

A massive perk of this compact grip is it only requires a single M-LOK slot to mount, meaning if you're short of space on your M-LOK front end you can probably squeeze the Stubby Vertical Foregrip on along with your other doodads. If you want to sweep between targets faster and keep your primary under control as you do it, the Airsoft Artisan M-LOK Stubby Vertical Foregrip will be an asset to you!

If you're ergonomic accessories for your M-LOK handguard, the Airsoft Artisan M-LOK Stubby Vertical Foregrip is both stylish and comfy! This vertical foregrip is the stubby variety, designed for use with the "C-Clamp" aka thumb-over-bore grip, functioning as both a hand stop and VFG all in one. 

The grip itself is made from high-density polymer and the M-LOK screw and nut from steel, giving you minuscule added weight with the assurance the grip will never come off in your hand. The front and rear include crackle textured panels for improved wet weather gripping qualities and the shape of the grip itself is surprisingly comfortable, bowing inwards in the centre and flaring out towards the tip, filling out the hand perfectly. 

A massive perk of this compact grip is it only requires a single M-LOK slot to mount, meaning if you're short of space on your M-LOK front end you can probably squeeze the Stubby Vertical Foregrip on along with your other doodads. If you want to sweep between targets faster and keep your primary under control as you do it, the Airsoft Artisan M-LOK Stubby Vertical Foregrip will be an asset to you!

A tough Polymer foregrip for 20mm rail systems, that has an instantly-deployable spring-loaded bipod inside for when you need to hit the ground and achieve a stable shooting position fast.

If you need a handling upgrade for your KeyMod-equipped primary, a stubby VFG will help you steer between targets far faster! The FMA Stubby Vertical Foregrip; KeyMod is constructed from high-density polymer with steel mounting hardware and can be fitted to any KeyMod rail system at a position of your choice. This grip is highly adaptable and can be used in multiple ways, including in a traditional vertical grip hold and with a thumb-over-bore hold. 

The grip has a ribbed exterior to enhance traction and its stubby design means it is far less likely to snag on your sling or other protruding gear. Also present is a storage compartment inside the grip, designed for CR123a batteries but equally capable of housing a small stash of tactical sweets to help you maintain energy and morale while skirmishing. The compartment can be accessed by unscrewing the base of the grip, and even includes a rubber O-ring to prevent moisture ingress. If you usually use a standard VFG and want to upgrade to something more modern, this grip is ideal!

A short and compact KeyMod foregrip, designed to be attached to KeyMod Railed Hand Guards to provide an additional control when handling your Airsoft weapon. 

A short and compact KeyMod foregrip, designed to be attached to KeyMod Railed Hand Guards to provide an additional control when handling your Airsoft weapon. 

A very easy to use fore grip that can be locked in a compact or full vertical position depending on your situation and requirements. 

This minimalistic hand stop provides you with a secure grip on your rifle for excellent handling and faster transitions during your skirmishes. It is constructed from a high-density polymer, which makes it strong and bump-resistant but doesn't add any extra weight to your platform. The hand stop ensures that you are always gripping your gun at the exact same spot, so you can operate your rifle with surgical precision from muscle memory.

This PTS Syndicate EP M-LOK Hand Stop attaches to your handguard via an M-LOK mounting system. Attach it on your platform to prevent the shooting hand from reaching past the handguard to the muzzle. It also gives you a superior grip during wet weather skirmishing as it is designed specifically to fit the shape of your hand.