All Electric Parts

A complete V6 gearbox designed as a replacement for CYMA P90 AEGs to breathe new life into your weapon.

If you're looking for a motor upgrade for your M4, G3, P90 or SMG-5, the G&G Long Shaft IFRIT 25K Orange Motor is a fantastic choice. This motor boasts a super speedy 25,000 RPM cyclic rate, providing an improved rate of fire and trigger response compared to most pre-installed motors. The set includes an O-type pinion gear and pinion spring, both of which are pre-installed.

Compatibility-wise, this motor is designed for M4/AR-15, P90, G3, SMG-5 (not the K version) AEGs and other AEGs which use long shaft motors. IFRIT Motors have a great reputation for speed and response rate, featuring inside G&G's ARP series and SSG-1. If you want improved rate of fire and trigger response, the G&G Armament Long Shaft IFRIT 25K Orange Motor will give you just that!

Increasing the rate of fire on your airsoft rifle sometimes causes it to misfeed, resulting in dry firing. A sector gear delay will solve your feeding problems 99.9% of the time with a simple add-on.

This sector gear clip increases the time it takes for the air nozzle to cycle. Delaying the cycle improves BB feeding by allowing the air nozzle to be retracted from the hop-feed for a longer duration.

This tiny add-on could instantly transform your AEG if it has been suffering from firing issues.

Although this is designed to be a perfect fit, it is recommended that this be permanently fixed in place using superglue, after testing to prevent it from potentially loosening over time.

If you want to add a more elite look to your M4 or you want a more snappy, responsive trigger, this should do the trick! The MAXX MODEL Advanced Speed Trigger for M4/AR-15 AEG; Type E is compatible with any M4/AR-15 AEG which uses a version 2 gearbox and is adjustable for both pretravel and overtravel, allowing you to cut out any unnecessary movement and lay down a hail of fire far more efficiently. 

The trigger is machined from a single piece of aircraft-grade aluminium using CNC processes, with a separate titanium pivot pin for maximum durability. The trigger shape is intended to provide a natural trigger position for the vast majority of hand sizes and has chamfered edges and three rubber pads to ensure comfort, enhance traction and provide positive control of the trigger. Either for use on its own or paired with an ETU/MOSFET, the Advanced Speed Trigger is ideal for CQB builds, DMR builds and others which prioritise trigger response!

If you are looking to upgrade your HOP unit, in most cases these days there isn't much to gain if you already have a rotary unit in your gun. This is the exception! Krytac has taken the rotary HOP unit and added in audible and tactile clicks when you adjust, locking the unit in its set position and allowing you to adjust accurately even in low light conditions! The unit also has engraved numerical setting indicators around the adjuster, allowing you to keep track of which setting works best with which BB weight, avoiding the trail and error! This package also includes a KRYTAC HOP rubber.

If you are looking for exceptional performance for your AEG, either for a high rate of fire build or a DMR running at higher than normal FPS reinforced gears are a must for long term reliability under increased stress. The Laylax EG Hard Gear Set is compatible with any AEG with a version 2 or version 3 gearbox and includes a hardened steel spur gear, sector gear and bevel gear. This gearset is a standard ratio set (18:1), intended to provide a great compromise between high speed and high torque, allowing you to take your build in either direction and still benefit from reinforced gears!

Upgrade your Lee Enfield with a superior cylinder. Tough and durable, the cylinder is specifically for the Lee Enfield S.M.L.E No. 1 MK III, with the cylinder set constructed from stainless steel and Teflon coated, to reduce piston friction. As a result the set can work with high-power springs. 

If you want a 'FET on your AK but don't fancy chopping up your gearbox shell, the ARCTURUS Version 3 Gearbox Shell; MOSFET Ready will sort you out! This alloy V3 gearbox shell includes 8mm steel bushings pre-installed and is designed to accept the standard V3 trigger switch, a Perun Hybrid V3 MOSFET or a Gate TITAN V3 MOSFET, meaning no need to get the Dremel out!

Being a V3 shell, this is compatible with most AK, AUG, AR36 and SMG-5K AEGs but doesn't include any internals other than the bushings. The rear of the shell is cut for a quick change spring guide and we recommend sourcing one from ARCTURUS to guarantee compatibility. Whether you aren't a fan of using power tools or you simply CBA, the ARCTURUS Version 3 Gearbox Shell; MOSFET Ready will help bring your AK up to speed with the most advanced builds on the field!

A vital spare for Version 3 gearboxes.

If you're thinking of making a gearbox from scratch or you've had a disaster with your current anti-reversal latch or ARL spring, the VFC Anti Reversal Latch For V2 Gearbox will sort you out! This set includes a steel ARL and spring steel ARL spring, making this ideal for upgraded AEGs with strengthened gearsets.

The anti-reversal latch in your airsoft electric gun is responsible for preventing reverse motion of the gears, which could cause damage to your piston and gears if it happens during a cycle of the gearbox.

This Anti-reversal latch set is intended for version 2 gearboxes and is a great spare or repair to have in your toolbox for those who like a bit of DIY when their AEGs stop cooperating. If you've lost that awkward little ARL spring, this set offers an easy route to replacing it for relatively cheap too!

If you're working on a gearbox build, FPS Softair 8mm Self Lubricating CNC Steel Bushings will give your build a long life of friction-free performance! Constructed from CNC machined steel, these 8mm solid bushings are compatible with any AEG gearbox which uses 8mm bushing/bearing holes. 

The advantage of solid bushings over ball-bearing bushings is their incredible strength, ideal for high-performance builds whether it's a DMR or DSG. If you're pushing the limits of Airsoft performance, FPS Softair 8mm Self Lubricating CNC Steel Bushings belong in your build!

Upgrade your AEGs gearbox to improve shot consistency thanks to a better air seal. The cylinder head is constructed from CNC Ergal and is anodised with a smooth surface finish, precisely engineered so that the tolerance is not affected. Features powerful built in UREPAN bumper that absorbs the shock from the piston head.

This cylinder head is suitable for Tokyo Marui NGRS or version 9 gearbox. The hardness of the yellow rubber is 60 degrees shore, with a good balance between air seal and strength making it suitable for use in a custom DMR, as well as helping to protect the gearbox and reduce noise.

Are you having HOP-up troubles with your ARCTURUS AK platforms? This is exactly what you need! This ARCTURUS Polymer Rotary Hop-Up Unit W/Magwell Spacer For Ak Serie is a complete replacement part and comes with the necessary pieces for installation. The main chamber is made from a sturdy plastic polymer and is compatible with ARCTURUS AK AEGs which have V3 Gearboxes. It is an affordable solution to mend your platforms with damaged or old HOP-up chambers.

The Magwell Spacer is designed to fit into the magazine well of any ARCTURUS AK and fill the gap between the HOP-up unit and the front of the magazine well to protect it and prevent over-insertion. We only recommend installing this HOP-up unit if you are confident in your abilities, some parts are small and installation must be precise.

Fix your AK replica's damaged HOP-up with the ARCTURUS Rotary Hop-Up Chamber For ARCTURUS AKs and you will have your replica shooting prime and proper in no time!

If you're running an SMG-5, M4/AR-15 or any other AEG which uses a version 2 gearbox, the GATE ASTER™ MOSFET will take your AEG to the next level. This advanced electronic trigger unit replaces your conventional trigger contacts with optical sensors, allowing for 250 different trigger sensitivity settings, burst and binary fire modes and a plethora of other functions to be programmed in using either the trigger and fire selector or the Gate Control Station App. 

This is the MOSFET we use in our Bolster Tuned platforms due to its fantastic balance of cost-effectiveness and performance, offering incredible efficiency improvements even before you get into the programmable features and customisation options. As with all ETU/MOSFET systems, a certain amount of expertise will be required to install the ASTER™ so if you're not confident, we suggest seeking a technician to carry out the installation process for you. If you're ready to take your AEG's performance to the next level, you're ready for the ASTER™!

If your SMG-5 trigger is a bit worn out or you have a flat trigger inside and you want a more classic SMG-5 look, the CYMA Trigger for SMG-5 AEG is what you need. This trigger is only for SMG-5 AEGs which use a version 2 gearbox and will not fit the version 3 gearbox equipped SMG-5K and SMG-5PDW series. The trigger itself is constructed from alloy and has the curve of the original SMG-5 trigger, making for an appropriately realistic look. Included with the trigger is a trigger return spring, so if you have lost this part you're in luck!

If you are planning to upgrade your Tokyo Marui NGRS system M4, this nozzle will be an asset to your build. The FPS Softair CNC ERGAL Air Seal Nozzle For TM NGRS M4/AR-15 is a vast improvement over the stock polymer air nozzle thanks to its highly robust CNC ERGAL (7075 aluminium alloy) construction and internal O-ring which should provide better air seal and a slight raise in FPS as a result.

The nozzle also comes with a pair of O-rings and has an anodised finish, providing a super smooth friction-free coating which will see your NGRS M4 working at peak efficiency.

If your CYMA MOSFET has met its end, or you want a cheap and cheerful upgrade, the CYMA MOSFET for V2 Gearbox is ideal. This MOSFET is a replacement original part for the CYMA Platinum AEG series and should work with any AEG which uses a version 2 gearbox. When installed, this MOSFET should improve trigger response and rate of fire, along with eliminating the chances of your trigger contacts becoming corroded. 

The MOSFET is pre-wired with two sets of spade connectors and you can choose between rear-wired and front-wired configurations. Please note, certain gearboxes will need modification to install this MOSFET/ETU unless they already have a slot in the shell designed for an electronic trigger. We only recommend this part for experienced users! 

If your CYMA MOSFET has met its end, or you want a cheap and cheerful upgrade, the CYMA MOSFET for V2 Gearbox is ideal. This MOSFET is a replacement original part for the CYMA Platinum AEG series and should work with any AEG which uses a version 2 gearbox. When installed, this MOSFET should improve trigger response and rate of fire, along with eliminating the chances of your trigger contacts becoming corroded. 

The MOSFET is pre-wired with two sets of spade connectors and you can choose between rear-wired and front-wired configurations. Please note, certain gearboxes will need modification to install this MOSFET/ETU unless they already have a slot in the shell designed for an electronic trigger. We only recommend this part for experienced users! 

If you feel the need for speed, the EG Hard Gear Set 13:1 Ratio for Version 2/3 Gearbox from Laylax will give you just that! The renowned Laylax/Prometheus EG Hard Gear series boasts over a decade of service, crafted with precision through Japanese machining, heat treatment, and forging techniques that adhere to the highest standards. This meticulous manufacturing ensures a notably quieter gear mesh sound, even under higher FPS and fire rate conditions.

These are 13:1 high-speed gears, improving rate of fire and trigger response by cycling the gearbox once every 13 motor revolutions as opposed to the standard once per 18 revolutions. This means you can boost rate of fire without upgrading your motor, though like any other replacement gearsets, these will require expertise to install. If you already upgraded your motor, wiring and added a MOSFET and you still want more speed, this gearset will do the trick. 

If your AK AEG needs a revamp, the S&T Complete V3 Gearbox w/ Micro Switch for AK AEGs is the easiest way to give it a new lease of life. This is a complete version 3 gearbox fitted with an AK nozzle, selector plate and top cover retention latch, though if you run an AR36, SG55x or SMG-5K you can swap these parts out for your original bits and use this gearbox in your replicas too. 

Inside, we have an impressive set of internal parts including 18:1 CNC steel gears, 8mm bushings, a steel quick change spring guide, a polymer piston with a full steel tooth rack, a CNC steel cylinder and CNC aluminium piston and cylinder heads. The wiring is low resistance and fitted with a mini-Tamiya connector, wired to suit front-wired and top-wired AK AEGs. The trigger is the "micro-switch" type, improving trigger response and longevity when compared to conventional copper trigger contacts. 

Complete gearboxes are the easiest way to fix gearbox issues for those who are less technically confident or those who don't have time to fiddle with the internal parts of their pride and joy. Whether you've got an AK AEG to fix, are working on a custom build or want a gearbox to learn the technical aspects of the hobby, the S&T Complete V3 Gearbox w/ Micro Switch for AK AEGs is a fine choice!

A replacement Pinion Gear designed to replace broken, damaged and worn Pinion Gear on Airsoft AEG Motors with Type-D Shaft. 

If you have broken your APS UAR trigger with some heavy fingered action we have the solution! The APS Trigger for UAR AEG is a replacement part for the UAR AEG and includes the trigger itself, trigger axis pin and trigger spring. 

A drop in MOSFET Kit designed for Tokyo Marui NGRS Recoil Shock Systems, such as the NGRS M4, and the NGRS SCAR. This variation of the Kit comes with the MOSFET Unit, the USB-Link, and is the Advanced version with unlocked features.

If you like to keep spares around just in case or you've had a selector plate failure in your Thompson or Pulse Rifle AEG, this is what you need! The CYMA Selector Plate for CM.033/051 Thompson AEG is an replacement original part from the CYMA CM.033/051 Thompson AEG series, constructed from polymer. Compatibility-wise, this should fit all Tokyo Marui spec Thompson and M41A Aliens Pulse Rifle AEGs, including those made by CYMA, Snow Wolf and Tokyo Marui. 

If you've stripped a gear or are working on a custom-built gearbox, the Delta Armory 18:1 Steel Gear Set is a great affordable option to get your build online! Constructed from steel, these 18:1 standard ratio gears are compatible with both version 2 and version 3 Airsoft gearboxes, offering 1 gear cycle per 18 motor cycles (18:1). 

The set includes the Spur gear, Bevel gear and Sector gear. If you need a cheap way to fix up your AEG or like to keep spares on hand just in case, the Delta Armory 18:1 Steel Gear Set belongs in your bits box!

If your selector switch is damaged or you lost a bit during maintenance this set can be a lifesaver! The ARCTURUS Ambi Fire Selector Gear Set for M4/M16 Replicas is a replacement original part set for ARCTURUS AEGs that feature a double sided, ambidextrous fire selector. This set includes the internal selector gears and axis for your AEGs ambidextrous selector switches. 

Are you having HOP-up troubles with your ARCTURUS AK platforms? This is exactly what you need! This HOP-up chamber is a complete replacement part and comes with the necessary pieces for installation. The main chamber is made from a sturdy plastic polymer and is compatible with ARCTURUS AK AEGs which have V3 Gearboxes. It is an affordable solution to mend your platforms with damaged or old HOP-up chambers.

We only recommend installing this HOP-up unit if you are confident in your abilities, some parts are small and installation must be precise.

Fix your AK replica's damaged HOP-up with the ARCTURUS Rotary Hop-Up Chamber For ARCTURUS AKs and you will have your replica shooting prime and proper in no time!

If you are looking to up the performance of your AEG and take it to the next level, Maple Leaf has got what you need. This 6.02mm Tightbore inner barrel is constructed from stainless steel and features a flawless internal finish for perfect shots every time. The 6.02mm is one of the tightest possible inner barrels that can be installed to get the most potential from your rifle and increase your FPS and accuracy to stay ahead of the competition.

The barrel measures 370mm and can be any rifle with an AEG-compatible HOP up, for those of you wanting to improve your rifle's air seal and overall efficiency. With the barrel being so tight, make sure to keep it clean for maximum performance.

If you want to squeeze a bit more accuracy and FPS out of your AEG, Laylax has just the thing. This 6.03mm Tightbore Inner barrel is part of the Laylax Prometheus range, widely regarded as the best source for AEG upgrade parts in the world. Inner barrels from this same range are known for their rigid stainless steel construction and immaculate internal finish and are what we use in the phenomenal Bolster Armouries AEGs.

This 6.03mm tightbore is designed for AEG rifles, SMGs, and support guns which use the Tokyo Marui AEG style of barrel cut, which is the vast majority on the market, and will provide an accuracy improvement thanks to its finely polished internal surfaces and a slight increase in FPS thanks to the tighter bore improving air seal and the overall efficiency of the system.

If you are building a version 3 AK gearbox or you have an old AK AEG that needs a refit, this spring set will be useful! The set includes all the springs needed to complete a version 3 gearbox for AK AEGs except for the mainspring (the spring that provides the power). Maybe you have lost a spring, or your tappet spring got chewed up after a long and hard life? This spring set should give you all you need to get your AK doing its dirty work once again!