Airsoft Boneyard

This item is being sold as a Boneyard as it has a crack in the lower receiver. This is on the left-hand front, near the magwell. This doesn't affect the functionality of the rifle, it has been tested and fires perfectly fine and while the crack's presence doesn't seem to affect the integrity of the rifle, be aware that an issue is possible to surface in the future.

Close to the crack are a couple of relatively noticeable scuffs, but other than that, the gun is in fantastic condition.

This is a bargain at this price, so grab it before it goes!

This uniquely styled M4 has seen better days... Starting with what you can see in the last image, there is a very large gouge out of the front of the receiver along with several pretty mean cracks. On top of this, the magazine release catch and button are missing, as well as the battery cover at the rear of the platform.

We strongly recommend replacing the receiver if you're intending on skirmishing this thing, however we advise this platform be bought for parts and funky furniture donations from what's remaining and in decent enough condition to go on your next build.

This gorgeous Daniel Defense PDW has landed in the boneyard with numerous faults. The main being a potential wiring issue, as this rifle occasionally shoots full auto bursts whilst in the semi auto position. The AEG is also shooting slightly hot, averaging roughly 360 FPS on the chrono. Finally, the other obvious fault is external damage in the form of scratches and markings on the rifle. If you're a technical Airsofter who knows their way around a gun, this is a bargain rifle to get back up and running with some potential easy fixes and part replacements.

The replica is non-functional. We're unsure as to why it won't function, so there's no guarantee that it is even fixable at all, but is could be a decent project to have to mess around with if you're up to the task! Aside from the functionality, the replica is sporting real wood furniture, though it has been painted in a Two-Tone fashion. It could still make for a good wall hanger or prop despite this.

Caution: When splitting the replica in half, ensure the bolt is pulled back to avoid damaging the bolt and/or hop unit.

This replica is in the Boneyard with a missing magazine latch. A new one will need to be sourced, else it'll be rather difficult to use the replica as it currently is. During testing, we were seeing 270 FPS on 0.20g BBs from this thing - usually we'd say this is quite weak, however chucking in a stronger spring will definitely kill-off this replica so the recorded FPS is perfect.

This iconic WW2 replica has found its way into our boneyard with various faults - the first of which is that a vast majority of its parts are missing, including the cover for the hop assembly alongside some parts that keep the bolt together. Further regarding the bolt, it appears that the spring contained within it is jammed on something and is incredibly hard to pull (it'll stop after a short distance which means you cannot cock the spring in order to fire, rendering this replica non-functional).

There is a random part in the box that we're uncertain on the origins of. The replica is also missing its magazine.

This BOLT BR47 was returned to us due to a stripped piston, rendering the gun non-functional. The AEG is in fantastic condition externally, with a single scratch on the right side of the handguard, beneath the 3 o'clock rail. A great project gun for a tech, or a nice looking wall hanger for the rest of us!

This awesome replica has been returned to us for a variety of issues; The main reason(s) is that the MOSFET is having problems and the fuse is blown, meaning this RIF is not functional. The replica is also very worn, meaning it'll need a bit of TLC to get it to looking as good as it does new. The flash hider is missing grub screws too, so replacements would need to be found to prevent it from coming off unless you want to use a different device.

This rifle needs the love it deserves, as it's a very unique platform given its ambidextrous charging handle which isn't common place for AK replicas.

This classic sniper rifle has landed in the boneyard with issues relating to the magazine well and its retention. The included magazine will simply not lock into the well, and so we were unable to test the platform with BBs. We can however confirm that the bolt mechanism seems fully functional as we could dry-fire the rifle.

The platform comes provided with a scope and bipod meaning that if you can fix the magazine well related issues you could have yourself a full sniper loadout for a fraction of its original price!

This discounted LMG has landed in the boneyard for various reasons. The obvious issue is the missing stock, but there are other problems, such as feeding issues and a loose handguard. Plus, the charging handle spring and rod are not attached; they are loose in the box. If you're looking for a project gun, this discounted LMG definitely needs some care and attention!

It's unknown the original reason this replica was returned to us, but during testing, it simply wouldn't shoot at all. We do not know the cause of this. This is a project piece for a techy with an MP7 sized gap on their pegboard, or even just for those who don't care whether or not their guns shoot, but just want the coolest ones!

It must also be noted that this gun's magazine is missing, so a replacement will need to be sourced if you want/need one.

This item is being sold as a Boneyard item due to cycling and feeding issues. They could potentially be fixed by those of you with technical knowledge however at this moment the rifle is being sold as non-functional. 

The receiver is also unfortunately cracked at the rear pin and the pin itself is missing. There are also marks and wear on the rifle as a whole. 

So if you fancy a project to tinker with or simply some spare parts or furniture, think about grabbing this for a discount price!

This Minigun AEG was originally a Two-Toned display piece in our showroom, but recently had its MOSFET scavenged for a warranty repair, meaning a replacement will now be needed to get this one back in working order. Aside form that, there are no other known faults. If you're able to source a MOSFET, you can now turn yourself into an Airsoft juggernaut without even needing a UKARA!

This unique replica has landed in our boneyard due to an issue with its motor cage - it seems that one of the points that the cage secures with the gearbox may have cracked as you can slightly rock the motor cage, meaning the motor will fall out of alignment whilst firing - this could be an easy fix depending on which part is broken, though further investigation will be necessary to see if the motor cage or gearbox shell will need replacing.

This minigun is missing a clip for one of the 5 barrels that is designed to stop BBs from rolling back. We're not entirely sure where this is located or if you can even acquire a replacement, so this minigun will likely serve as an awesome display piece.

This super unique replica is in the Boneyard due to its inconsistent FPS. During testing we were seeing an average of 255 using 0.20g BBs, but a few outliers as high as 278 and low as 147 were seen...

If you want to tinker with this thing and figure out how to fix it, we wish you the best of luck! But if not, this incredibly cool piece could certainly make for a great showpiece. It's in pristine external condition, just waiting for a new loving owner to admire it!

This replica has a dead MOSFET. Due to the proprietary nature of this replica, we expect it to serve well as a unique display piece, though we do wish you luck in sourcing a new MOSFET directly from G&G if you're so determined to get this thing working as it should. The secondary adjustment lever of the stock is also snapped but the buffer tube should accept practically any M4/AR-15 sliding stock. 

It uses G&G's G3 gearbox which is slightly larger than a regular V2, it is also a split, similar to what can be found in many ICS platforms - this means it has its own proprietary gears, suggesting any out-of-the-box MOSFET will not fit and/or work. A great source of parts for spares and repairs!

This beast of a replica has a few relatively simple issues - The main one being that the motor connectors aren't connected. We've also discovered that the buttpad is being held in with a single screw that's loose, so this potentially needs to be rectified in order to properly secure it. Other than that, we're not too sure on what other faults pre-exist so this is considered a project gun - or if you can bear the two-tone green; a wall-hanger!

This replica was returned to us due to its gearbox locking up, however we didn't experience this at all during testing. We can not guarantee that the issue will not re-emerge in the future though... The replica is also missing the scope originally included, so if you're wanting to reach out to distant targets, a suitable replacement will be needed. The rear iron sight is also missing, though if you're going to be running a scope, this won't be too much of an issue.

Externally, the replica does have various marks and scratches on it, as well as a Two-Tone blue paint job. The build quality and styling of this replica are still very impressive regardless of the slight wear. During testing, we were seeing 240 FPS using 0.20g BBs, so it could definitely use a stronger spring unless the locking issues are indicative of a faulty gearbox resulting in a lower FPS recording.

This replica has a multitude of issues, the first of which is the non-existent wire loom... Due to this we are unable to conduct any tests with the thing, so more issues may be present than we're aware of. Supposedly it was having feeding problems at one point, and there is a crack on the rear left side of the internal magazine. This replica overall hasn't been treated with much care, and has quite a few marks and scratches across it - primarily on the stock.

A mighty project for the winter, or an accurate and officially licensed display piece. You decide...